summaryrefslogtreecommitdiff
path: root/platforms/avr
diff options
context:
space:
mode:
Diffstat (limited to 'platforms/avr')
-rw-r--r--platforms/avr/_pin_defs.h (renamed from platforms/avr/pin_defs.h)0
-rw-r--r--platforms/avr/bootloaders/bootloadhid.c7
-rw-r--r--platforms/avr/bootloaders/caterina.c9
-rw-r--r--platforms/avr/bootloaders/custom.c9
-rw-r--r--platforms/avr/bootloaders/dfu.c9
-rw-r--r--platforms/avr/bootloaders/halfkay.c10
-rw-r--r--platforms/avr/bootloaders/usbasploader.c9
-rw-r--r--platforms/avr/drivers/hd44780.c542
-rw-r--r--platforms/avr/drivers/hd44780.h348
-rw-r--r--platforms/avr/hardware_id.c19
-rw-r--r--platforms/avr/platform.c13
-rw-r--r--platforms/avr/platform.mk18
12 files changed, 100 insertions, 893 deletions
diff --git a/platforms/avr/pin_defs.h b/platforms/avr/_pin_defs.h
index 3889704a87..3889704a87 100644
--- a/platforms/avr/pin_defs.h
+++ b/platforms/avr/_pin_defs.h
diff --git a/platforms/avr/bootloaders/bootloadhid.c b/platforms/avr/bootloaders/bootloadhid.c
index ae58760d7d..b91dca6d27 100644
--- a/platforms/avr/bootloaders/bootloadhid.c
+++ b/platforms/avr/bootloaders/bootloadhid.c
@@ -31,3 +31,10 @@ __attribute__((weak)) void bootloader_jump(void) {
for (;;)
;
}
+
+__attribute__((weak)) void mcu_reset(void) {
+ // watchdog reset
+ wdt_enable(WDTO_250MS);
+ for (;;)
+ ;
+}
diff --git a/platforms/avr/bootloaders/caterina.c b/platforms/avr/bootloaders/caterina.c
index 82a16a3765..2b5f613d6d 100644
--- a/platforms/avr/bootloaders/caterina.c
+++ b/platforms/avr/bootloaders/caterina.c
@@ -37,3 +37,12 @@ __attribute__((weak)) void bootloader_jump(void) {
while (1) {
}
}
+
+__attribute__((weak)) void mcu_reset(void) {
+ // setup watchdog timeout
+ wdt_enable(WDTO_60MS);
+
+ // wait for watchdog timer to trigger
+ while (1) {
+ }
+}
diff --git a/platforms/avr/bootloaders/custom.c b/platforms/avr/bootloaders/custom.c
index 624fbe242a..72b19f6671 100644
--- a/platforms/avr/bootloaders/custom.c
+++ b/platforms/avr/bootloaders/custom.c
@@ -15,5 +15,14 @@
*/
#include "bootloader.h"
+#include <avr/wdt.h>
__attribute__((weak)) void bootloader_jump(void) {}
+__attribute__((weak)) void mcu_reset(void) {
+ // setup watchdog timeout
+ wdt_enable(WDTO_60MS);
+
+ // wait for watchdog timer to trigger
+ while (1) {
+ }
+}
diff --git a/platforms/avr/bootloaders/dfu.c b/platforms/avr/bootloaders/dfu.c
index 06b2c8963a..dbbb5f4ab6 100644
--- a/platforms/avr/bootloaders/dfu.c
+++ b/platforms/avr/bootloaders/dfu.c
@@ -34,8 +34,15 @@ __attribute__((weak)) void bootloader_jump(void) {
UCSR1B = 0;
_delay_ms(5); // 5 seems to work fine
- // watchdog reset
reset_key = BOOTLOADER_RESET_KEY;
+ // watchdog reset
+ wdt_enable(WDTO_250MS);
+ for (;;)
+ ;
+}
+
+__attribute__((weak)) void mcu_reset(void) {
+ // watchdog reset
wdt_enable(WDTO_250MS);
for (;;)
;
diff --git a/platforms/avr/bootloaders/halfkay.c b/platforms/avr/bootloaders/halfkay.c
index 651696f988..402f5f2778 100644
--- a/platforms/avr/bootloaders/halfkay.c
+++ b/platforms/avr/bootloaders/halfkay.c
@@ -17,6 +17,7 @@
#include "bootloader.h"
#include <avr/interrupt.h>
+#include <avr/wdt.h>
#include <util/delay.h>
__attribute__((weak)) void bootloader_jump(void) {
@@ -126,3 +127,12 @@ __attribute__((weak)) void bootloader_jump(void) {
asm volatile("jmp 0x1FC00");
#endif
}
+
+__attribute__((weak)) void mcu_reset(void) {
+ // setup watchdog timeout
+ wdt_enable(WDTO_60MS);
+
+ // wait for watchdog timer to trigger
+ while (1) {
+ }
+}
diff --git a/platforms/avr/bootloaders/usbasploader.c b/platforms/avr/bootloaders/usbasploader.c
index 008bd16069..333010eefa 100644
--- a/platforms/avr/bootloaders/usbasploader.c
+++ b/platforms/avr/bootloaders/usbasploader.c
@@ -54,3 +54,12 @@ __attribute__((weak)) void bootloader_jump(void) {
#endif
[bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff));
}
+
+__attribute__((weak)) void mcu_reset(void) {
+ // setup watchdog timeout
+ wdt_enable(WDTO_15MS);
+
+ // wait for watchdog timer to trigger
+ while (1) {
+ }
+}
diff --git a/platforms/avr/drivers/hd44780.c b/platforms/avr/drivers/hd44780.c
deleted file mode 100644
index f15d7d0da8..0000000000
--- a/platforms/avr/drivers/hd44780.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/****************************************************************************
- Title: HD44780U LCD library
- Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury
- License: GNU General Public License Version 3
- File: $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $
- Software: AVR-GCC 3.3
- Target: any AVR device, memory mapped mode only for AT90S4414/8515/Mega
-
- DESCRIPTION
- Basic routines for interfacing a HD44780U-based text lcd display
-
- Originally based on Volker Oth's lcd library,
- changed lcd_init(), added additional constants for lcd_command(),
- added 4-bit I/O mode, improved and optimized code.
-
- Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in
- 4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported.
-
- Memory mapped mode compatible with Kanda STK200, but supports also
- generation of R/W signal through A8 address line.
-
- USAGE
- See the C include lcd.h file for a description of each function
-
-*****************************************************************************/
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <util/delay.h>
-#include "hd44780.h"
-
-/*
-** constants/macros
-*/
-#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */
-#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
-/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */
-# define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2)))
-#else
-# define PIN(x) (*(&x - 2)) /* address of input register of port x */
-#endif
-
-#if LCD_IO_MODE
-# define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE)
-# define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN);
-# define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN);
-# define lcd_e_toggle() toggle_e()
-# define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN)
-# define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN)
-# define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN)
-# define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN)
-#endif
-
-#if LCD_IO_MODE
-# if LCD_LINES == 1
-# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE
-# else
-# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES
-# endif
-#else
-# if LCD_LINES == 1
-# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE
-# else
-# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES
-# endif
-#endif
-
-#if LCD_CONTROLLER_KS0073
-# if LCD_LINES == 4
-
-# define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */
-# define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */
-# define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */
-
-# endif
-#endif
-
-/*
-** function prototypes
-*/
-#if LCD_IO_MODE
-static void toggle_e(void);
-#endif
-
-/*
-** local functions
-*/
-
-/*************************************************************************
-delay for a minimum of <us> microseconds
-the number of loops is calculated at compile-time from MCU clock frequency
-*************************************************************************/
-#define delay(us) _delay_us(us)
-
-#if LCD_IO_MODE
-/* toggle Enable Pin to initiate write */
-static void toggle_e(void) {
- lcd_e_high();
- lcd_e_delay();
- lcd_e_low();
-}
-#endif
-
-/*************************************************************************
-Low-level function to write byte to LCD controller
-Input: data byte to write to LCD
- rs 1: write data
- 0: write instruction
-Returns: none
-*************************************************************************/
-#if LCD_IO_MODE
-static void lcd_write(uint8_t data, uint8_t rs) {
- unsigned char dataBits;
-
- if (rs) { /* write data (RS=1, RW=0) */
- lcd_rs_high();
- } else { /* write instruction (RS=0, RW=0) */
- lcd_rs_low();
- }
- lcd_rw_low(); /* RW=0 write mode */
-
- if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
- /* configure data pins as output */
- DDR(LCD_DATA0_PORT) |= 0x0F;
-
- /* output high nibble first */
- dataBits = LCD_DATA0_PORT & 0xF0;
- LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F);
- lcd_e_toggle();
-
- /* output low nibble */
- LCD_DATA0_PORT = dataBits | (data & 0x0F);
- lcd_e_toggle();
-
- /* all data pins high (inactive) */
- LCD_DATA0_PORT = dataBits | 0x0F;
- } else {
- /* configure data pins as output */
- DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
- DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
- DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
- DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
-
- /* output high nibble first */
- LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
- LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
- LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
- LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
- if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
- if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
- if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
- if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
- lcd_e_toggle();
-
- /* output low nibble */
- LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
- LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
- LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
- LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
- if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
- if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
- if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
- if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
- lcd_e_toggle();
-
- /* all data pins high (inactive) */
- LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
- LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
- LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
- LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
- }
-}
-#else
-# define lcd_write(d, rs) \
- if (rs) \
- *(volatile uint8_t *)(LCD_IO_DATA) = d; \
- else \
- *(volatile uint8_t *)(LCD_IO_FUNCTION) = d;
-/* rs==0 -> write instruction to LCD_IO_FUNCTION */
-/* rs==1 -> write data to LCD_IO_DATA */
-#endif
-
-/*************************************************************************
-Low-level function to read byte from LCD controller
-Input: rs 1: read data
- 0: read busy flag / address counter
-Returns: byte read from LCD controller
-*************************************************************************/
-#if LCD_IO_MODE
-static uint8_t lcd_read(uint8_t rs) {
- uint8_t data;
-
- if (rs)
- lcd_rs_high(); /* RS=1: read data */
- else
- lcd_rs_low(); /* RS=0: read busy flag */
- lcd_rw_high(); /* RW=1 read mode */
-
- if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
- DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */
-
- lcd_e_high();
- lcd_e_delay();
- data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */
- lcd_e_low();
-
- lcd_e_delay(); /* Enable 500ns low */
-
- lcd_e_high();
- lcd_e_delay();
- data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble */
- lcd_e_low();
- } else {
- /* configure data pins as input */
- DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN);
- DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN);
- DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN);
- DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN);
-
- /* read high nibble first */
- lcd_e_high();
- lcd_e_delay();
- data = 0;
- if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10;
- if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20;
- if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40;
- if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80;
- lcd_e_low();
-
- lcd_e_delay(); /* Enable 500ns low */
-
- /* read low nibble */
- lcd_e_high();
- lcd_e_delay();
- if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01;
- if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02;
- if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04;
- if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08;
- lcd_e_low();
- }
- return data;
-}
-#else
-# define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ)
-/* rs==0 -> read instruction from LCD_IO_FUNCTION */
-/* rs==1 -> read data from LCD_IO_DATA */
-#endif
-
-/*************************************************************************
-loops while lcd is busy, returns address counter
-*************************************************************************/
-static uint8_t lcd_waitbusy(void)
-
-{
- register uint8_t c;
-
- /* wait until busy flag is cleared */
- while ((c = lcd_read(0)) & (1 << LCD_BUSY)) {
- }
-
- /* the address counter is updated 4us after the busy flag is cleared */
- delay(LCD_DELAY_BUSY_FLAG);
-
- /* now read the address counter */
- return (lcd_read(0)); // return address counter
-
-} /* lcd_waitbusy */
-
-/*************************************************************************
-Move cursor to the start of next line or to the first line if the cursor
-is already on the last line.
-*************************************************************************/
-static inline void lcd_newline(uint8_t pos) {
- register uint8_t addressCounter;
-
-#if LCD_LINES == 1
- addressCounter = 0;
-#endif
-#if LCD_LINES == 2
- if (pos < (LCD_START_LINE2))
- addressCounter = LCD_START_LINE2;
- else
- addressCounter = LCD_START_LINE1;
-#endif
-#if LCD_LINES == 4
-# if KS0073_4LINES_MODE
- if (pos < LCD_START_LINE2)
- addressCounter = LCD_START_LINE2;
- else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3))
- addressCounter = LCD_START_LINE3;
- else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4))
- addressCounter = LCD_START_LINE4;
- else
- addressCounter = LCD_START_LINE1;
-# else
- if (pos < LCD_START_LINE3)
- addressCounter = LCD_START_LINE2;
- else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4))
- addressCounter = LCD_START_LINE3;
- else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2))
- addressCounter = LCD_START_LINE4;
- else
- addressCounter = LCD_START_LINE1;
-# endif
-#endif
- lcd_command((1 << LCD_DDRAM) + addressCounter);
-
-} /* lcd_newline */
-
-/*
-** PUBLIC FUNCTIONS
-*/
-
-/*************************************************************************
-Send LCD controller instruction command
-Input: instruction to send to LCD controller, see HD44780 data sheet
-Returns: none
-*************************************************************************/
-void lcd_command(uint8_t cmd) {
- lcd_waitbusy();
- lcd_write(cmd, 0);
-}
-
-/*************************************************************************
-Send data byte to LCD controller
-Input: data to send to LCD controller, see HD44780 data sheet
-Returns: none
-*************************************************************************/
-void lcd_data(uint8_t data) {
- lcd_waitbusy();
- lcd_write(data, 1);
-}
-
-/*************************************************************************
-Set cursor to specified position
-Input: x horizontal position (0: left most position)
- y vertical position (0: first line)
-Returns: none
-*************************************************************************/
-void lcd_gotoxy(uint8_t x, uint8_t y) {
-#if LCD_LINES == 1
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
-#endif
-#if LCD_LINES == 2
- if (y == 0)
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
- else
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
-#endif
-#if LCD_LINES == 4
- if (y == 0)
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
- else if (y == 1)
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
- else if (y == 2)
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x);
- else /* y==3 */
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x);
-#endif
-
-} /* lcd_gotoxy */
-
-/*************************************************************************
-*************************************************************************/
-int lcd_getxy(void) {
- return lcd_waitbusy();
-}
-
-/*************************************************************************
-Clear display and set cursor to home position
-*************************************************************************/
-void lcd_clrscr(void) {
- lcd_command(1 << LCD_CLR);
-}
-
-/*************************************************************************
-Set cursor to home position
-*************************************************************************/
-void lcd_home(void) {
- lcd_command(1 << LCD_HOME);
-}
-
-/*************************************************************************
-Display character at current cursor position
-Input: character to be displayed
-Returns: none
-*************************************************************************/
-void lcd_putc(char c) {
- uint8_t pos;
-
- pos = lcd_waitbusy(); // read busy-flag and address counter
- if (c == '\n') {
- lcd_newline(pos);
- } else {
-#if LCD_WRAP_LINES == 1
-# if LCD_LINES == 1
- if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
- }
-# elif LCD_LINES == 2
- if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
- } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
- }
-# elif LCD_LINES == 4
- if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
- } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0);
- } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0);
- } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
- }
-# endif
- lcd_waitbusy();
-#endif
- lcd_write(c, 1);
- }
-
-} /* lcd_putc */
-
-/*************************************************************************
-Display string without auto linefeed
-Input: string to be displayed
-Returns: none
-*************************************************************************/
-void lcd_puts(const char *s)
-/* print string on lcd (no auto linefeed) */
-{
- register char c;
-
- while ((c = *s++)) {
- lcd_putc(c);
- }
-
-} /* lcd_puts */
-
-/*************************************************************************
-Display string from program memory without auto linefeed
-Input: string from program memory be be displayed
-Returns: none
-*************************************************************************/
-void lcd_puts_p(const char *progmem_s)
-/* print string from program memory on lcd (no auto linefeed) */
-{
- register char c;
-
- while ((c = pgm_read_byte(progmem_s++))) {
- lcd_putc(c);
- }
-
-} /* lcd_puts_p */
-
-/*************************************************************************
-Initialize display and select type of cursor
-Input: dispAttr LCD_DISP_OFF display off
- LCD_DISP_ON display on, cursor off
- LCD_DISP_ON_CURSOR display on, cursor on
- LCD_DISP_CURSOR_BLINK display on, cursor on flashing
-Returns: none
-*************************************************************************/
-void lcd_init(uint8_t dispAttr) {
-#if LCD_IO_MODE
- /*
- * Initialize LCD to 4 bit I/O mode
- */
-
- if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) {
- /* configure all port bits as output (all LCD lines on same port) */
- DDR(LCD_DATA0_PORT) |= 0x7F;
- } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
- /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */
- DDR(LCD_DATA0_PORT) |= 0x0F;
- DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
- DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
- DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
- } else {
- /* configure all port bits as output (LCD data and control lines on different ports */
- DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
- DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
- DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
- DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
- DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
- DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
- DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
- }
- delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on */
-
- /* initial write to lcd is 8bit */
- LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); // LCD_FUNCTION>>4;
- LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4;
- lcd_e_toggle();
- delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */
-
- /* repeat last command */
- lcd_e_toggle();
- delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
-
- /* repeat last command a third time */
- lcd_e_toggle();
- delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
-
- /* now configure for 4bit mode */
- LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4
- lcd_e_toggle();
- delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */
-
- /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */
-#else
- /*
- * Initialize LCD to 8 bit memory mapped mode
- */
-
- /* enable external SRAM (memory mapped lcd) and one wait state */
- MCUCR = _BV(SRE) | _BV(SRW);
-
- /* reset LCD */
- delay(LCD_DELAY_BOOTUP); /* wait 16ms after power-on */
- lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
- delay(LCD_DELAY_INIT); /* wait 5ms */
- lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
- delay(LCD_DELAY_INIT_REP); /* wait 64us */
- lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
- delay(LCD_DELAY_INIT_REP); /* wait 64us */
-#endif
-
-#if KS0073_4LINES_MODE
- /* Display with KS0073 controller requires special commands for enabling 4 line mode */
- lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON);
- lcd_command(KS0073_4LINES_MODE);
- lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF);
-#else
- lcd_command(LCD_FUNCTION_DEFAULT); /* function set: display lines */
-#endif
- lcd_command(LCD_DISP_OFF); /* display off */
- lcd_clrscr(); /* display clear */
- lcd_command(LCD_MODE_DEFAULT); /* set entry mode */
- lcd_command(dispAttr); /* display/cursor control */
-
-} /* lcd_init */
diff --git a/platforms/avr/drivers/hd44780.h b/platforms/avr/drivers/hd44780.h
deleted file mode 100644
index 08e60f8a44..0000000000
--- a/platforms/avr/drivers/hd44780.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*************************************************************************
- Title : C include file for the HD44780U LCD library (lcd.c)
- Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury
- License: GNU General Public License Version 3
- File: $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $
- Software: AVR-GCC 4.x
- Hardware: any AVR device, memory mapped mode only for AVR with
- memory mapped interface (AT90S8515/ATmega8515/ATmega128)
-***************************************************************************/
-
-/**
- @mainpage
- Collection of libraries for AVR-GCC
- @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
- @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
-
- @file
- @defgroup pfleury_lcd LCD library <lcd.h>
- @code #include <lcd.h> @endcode
-
- @brief Basic routines for interfacing a HD44780U-based character LCD display
-
- LCD character displays can be found in many devices, like espresso machines, laser printers.
- The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays.
-
- This library allows easy interfacing with a HD44780 compatible display and can be
- operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in
- 4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported.
-
- Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports
- generation of R/W signal through A8 address line.
-
- @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a>
- on my home page, which shows example circuits how to connect an LCD to an AVR controller.
-
- @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
-
- @version 2.0
-
- @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
-
-*/
-
-#pragma once
-
-#include <inttypes.h>
-#include <avr/pgmspace.h>
-
-#if (__GNUC__ * 100 + __GNUC_MINOR__) < 405
-# error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
-#endif
-
-/**@{*/
-
-/*
- * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file
- * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile
- * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- */
-#ifdef _LCD_DEFINITIONS_FILE
-# include "lcd_definitions.h"
-#endif
-
-/**
- * @name Definition for LCD controller type
- * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller.
- */
-#ifndef LCD_CONTROLLER_KS0073
-# define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
-#endif
-
-/**
- * @name Definitions for Display Size
- * Change these definitions to adapt setting to your display
- *
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
- * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile.
- * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- *
- */
-#ifndef LCD_LINES
-# define LCD_LINES 2 /**< number of visible lines of the display */
-#endif
-#ifndef LCD_DISP_LENGTH
-# define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */
-#endif
-#ifndef LCD_LINE_LENGTH
-# define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */
-#endif
-#ifndef LCD_START_LINE1
-# define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */
-#endif
-#ifndef LCD_START_LINE2
-# define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */
-#endif
-#ifndef LCD_START_LINE3
-# define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */
-#endif
-#ifndef LCD_START_LINE4
-# define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */
-#endif
-#ifndef LCD_WRAP_LINES
-# define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */
-#endif
-
-/**
- * @name Definitions for 4-bit IO mode
- *
- * The four LCD data lines and the three control lines RS, RW, E can be on the
- * same port or on different ports.
- * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on
- * different ports.
- *
- * Normally the four data lines should be mapped to bit 0..3 on one port, but it
- * is possible to connect these data lines in different order or even on different
- * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions.
- *
- * Adjust these definitions to your target.\n
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
- * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
- * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- *
- */
-#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */
-
-#if LCD_IO_MODE
-
-# ifndef LCD_PORT
-# define LCD_PORT PORTA /**< port for the LCD lines */
-# endif
-# ifndef LCD_DATA0_PORT
-# define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */
-# endif
-# ifndef LCD_DATA1_PORT
-# define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */
-# endif
-# ifndef LCD_DATA2_PORT
-# define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */
-# endif
-# ifndef LCD_DATA3_PORT
-# define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */
-# endif
-# ifndef LCD_DATA0_PIN
-# define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */
-# endif
-# ifndef LCD_DATA1_PIN
-# define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */
-# endif
-# ifndef LCD_DATA2_PIN
-# define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */
-# endif
-# ifndef LCD_DATA3_PIN
-# define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */
-# endif
-# ifndef LCD_RS_PORT
-# define LCD_RS_PORT LCD_PORT /**< port for RS line */
-# endif
-# ifndef LCD_RS_PIN
-# define LCD_RS_PIN 3 /**< pin for RS line */
-# endif
-# ifndef LCD_RW_PORT
-# define LCD_RW_PORT LCD_PORT /**< port for RW line */
-# endif
-# ifndef LCD_RW_PIN
-# define LCD_RW_PIN 2 /**< pin for RW line */
-# endif
-# ifndef LCD_E_PORT
-# define LCD_E_PORT LCD_PORT /**< port for Enable line */
-# endif
-# ifndef LCD_E_PIN
-# define LCD_E_PIN 1 /**< pin for Enable line */
-# endif
-
-#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
-/*
- * memory mapped mode is only supported when the device has an external data memory interface
- */
-# define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */
-# define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */
-# define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */
-
-#else
-# error "external data memory interface not available for this device, use 4-bit IO port mode"
-
-#endif
-
-/**
- * @name Definitions of delays
- * Used to calculate delay timers.
- * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target
- *
- * These delay times can be adjusted, if some displays require different delays.\n
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
- * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
- * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- */
-#ifndef LCD_DELAY_BOOTUP
-# define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */
-#endif
-#ifndef LCD_DELAY_INIT
-# define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */
-#endif
-#ifndef LCD_DELAY_INIT_REP
-# define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */
-#endif
-#ifndef LCD_DELAY_INIT_4BIT
-# define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */
-#endif
-#ifndef LCD_DELAY_BUSY_FLAG
-# define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */
-#endif
-#ifndef LCD_DELAY_ENABLE_PULSE
-# define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */
-#endif
-
-/**
- * @name Definitions for LCD command instructions
- * The constants define the various LCD controller instructions which can be passed to the
- * function lcd_command(), see HD44780 data sheet for a complete description.
- */
-
-/* instruction register bit positions, see HD44780U data sheet */
-#define LCD_CLR 0 /* DB0: clear display */
-#define LCD_HOME 1 /* DB1: return to home position */
-#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */
-#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */
-#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */
-#define LCD_ON 3 /* DB3: turn lcd/cursor on */
-#define LCD_ON_DISPLAY 2 /* DB2: turn display on */
-#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */
-#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */
-#define LCD_MOVE 4 /* DB4: move cursor/display */
-#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */
-#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */
-#define LCD_FUNCTION 5 /* DB5: function set */
-#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */
-#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */
-#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */
-#define LCD_CGRAM 6 /* DB6: set CG RAM address */
-#define LCD_DDRAM 7 /* DB7: set DD RAM address */
-#define LCD_BUSY 7 /* DB7: LCD is busy */
-
-/* set entry mode: display shift on/off, dec/inc cursor move direction */
-#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */
-#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */
-#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */
-#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */
-
-/* display on/off, cursor on/off, blinking char at cursor position */
-#define LCD_DISP_OFF 0x08 /* display off */
-#define LCD_DISP_ON 0x0C /* display on, cursor off */
-#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */
-#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */
-#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */
-
-/* move cursor/shift display */
-#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */
-#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */
-#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */
-#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */
-
-/* function set: set interface data length and number of display lines */
-#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */
-#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */
-
-#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC))
-
-/**
- * @name Functions
- */
-
-/**
- @brief Initialize display and select type of cursor
- @param dispAttr \b LCD_DISP_OFF display off\n
- \b LCD_DISP_ON display on, cursor off\n
- \b LCD_DISP_ON_CURSOR display on, cursor on\n
- \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing
- @return none
-*/
-extern void lcd_init(uint8_t dispAttr);
-
-/**
- @brief Clear display and set cursor to home position
- @return none
-*/
-extern void lcd_clrscr(void);
-
-/**
- @brief Set cursor to home position
- @return none
-*/
-extern void lcd_home(void);
-
-/**
- @brief Set cursor to specified position
-
- @param x horizontal position\n (0: left most position)
- @param y vertical position\n (0: first line)
- @return none
-*/
-extern void lcd_gotoxy(uint8_t x, uint8_t y);
-
-/**
- @brief Display character at current cursor position
- @param c character to be displayed
- @return none
-*/
-extern void lcd_putc(char c);
-
-/**
- @brief Display string without auto linefeed
- @param s string to be displayed
- @return none
-*/
-extern void lcd_puts(const char *s);
-
-/**
- @brief Display string from program memory without auto linefeed
- @param progmem_s string from program memory be be displayed
- @return none
- @see lcd_puts_P
-*/
-extern void lcd_puts_p(const char *progmem_s);
-
-/**
- @brief Send LCD controller instruction command
- @param cmd instruction to send to LCD controller, see HD44780 data sheet
- @return none
-*/
-extern void lcd_command(uint8_t cmd);
-
-/**
- @brief Send data byte to LCD controller
-
- Similar to lcd_putc(), but without interpreting LF
- @param data byte to send to LCD controller, see HD44780 data sheet
- @return none
-*/
-extern void lcd_data(uint8_t data);
-
-/**
- @brief macros for automatically storing string constant in program memory
-*/
-#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s))
-
-/**@}*/
diff --git a/platforms/avr/hardware_id.c b/platforms/avr/hardware_id.c
new file mode 100644
index 0000000000..b61f0d92df
--- /dev/null
+++ b/platforms/avr/hardware_id.c
@@ -0,0 +1,19 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// For some reason this bit is undocumented for some AVR parts and not defined in their avr-libc IO headers
+// See https://stackoverflow.com/questions/12350914/how-to-read-atmega-32-signature-row
+#ifndef SIGRD
+# define SIGRD 5
+#endif // SIGRD
+
+#include <avr/boot.h>
+#include "hardware_id.h"
+
+hardware_id_t get_hardware_id(void) {
+ hardware_id_t id = {0};
+ for (uint8_t i = 0; i < 10; i += 1) {
+ ((uint8_t*)&id)[i] = boot_signature_byte_get(i + 0x0E);
+ }
+ return id;
+}
diff --git a/platforms/avr/platform.c b/platforms/avr/platform.c
index 3e35b4fe4c..37decb6ec8 100644
--- a/platforms/avr/platform.c
+++ b/platforms/avr/platform.c
@@ -16,6 +16,17 @@
#include "platform_deps.h"
+static void disable_jtag(void) {
+// To use PF4-7 (PC2-5 on ATmega32A), disable JTAG by writing JTD bit twice within four cycles.
+#if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
+ MCUCR |= _BV(JTD);
+ MCUCR |= _BV(JTD);
+#elif defined(__AVR_ATmega32A__)
+ MCUCSR |= _BV(JTD);
+ MCUCSR |= _BV(JTD);
+#endif
+}
+
void platform_setup(void) {
- // do nothing
+ disable_jtag();
}
diff --git a/platforms/avr/platform.mk b/platforms/avr/platform.mk
index 4d9cafaeef..0374e2e058 100644
--- a/platforms/avr/platform.mk
+++ b/platforms/avr/platform.mk
@@ -18,6 +18,13 @@ COMPILEFLAGS += -ffunction-sections
COMPILEFLAGS += -fdata-sections
COMPILEFLAGS += -fpack-struct
COMPILEFLAGS += -fshort-enums
+COMPILEFLAGS += -mcall-prologues
+
+# Linker relaxation is only possible if
+# link time optimizations are not enabled.
+ifeq ($(strip $(LTO_ENABLE)), no)
+ COMPILEFLAGS += -mrelax
+endif
ASFLAGS += $(AVR_ASFLAGS)
@@ -28,7 +35,16 @@ CFLAGS += -fno-strict-aliasing
CXXFLAGS += $(COMPILEFLAGS)
CXXFLAGS += -fno-exceptions -std=c++11
-LDFLAGS +=-Wl,--gc-sections
+LDFLAGS += -Wl,--gc-sections
+
+# Use AVR's libc minimal printf implementation which has less features
+# and thus can shave ~400 bytes. Usually we use the xprintf
+# implementation but keyboards that use s(n)printf automatically
+# pull in the AVR libc implementation, which is ~900 bytes heavy.
+AVR_USE_MINIMAL_PRINTF ?= no
+ifeq ($(strip $(AVR_USE_MINIMAL_PRINTF)), yes)
+ LDFLAGS += -Wl,--whole-archive -lprintf_min -Wl,--no-whole-archive
+endif
OPT_DEFS += -DF_CPU=$(F_CPU)UL