diff options
Diffstat (limited to 'lib/usbhost/USB_Host_Shield_2.0/examples/adk')
5 files changed, 398 insertions, 0 deletions
diff --git a/lib/usbhost/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino new file mode 100644 index 0000000000..d59b9bb3dc --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino @@ -0,0 +1,89 @@ +// The source for the Android application can be found at the following link: https://github.com/Lauszus/ArduinoBlinkLED +// The code for the Android application is heavily based on this guide: http://allaboutee.com/2011/12/31/arduino-adk-board-blink-an-led-with-your-phone-code-and-explanation/ by Miguel +#include <adk.h> + +// +// CAUTION! WARNING! ATTENTION! VORSICHT! ADVARSEL! ¡CUIDADO! ВНИМАНИЕ! +// +// Pin 13 is occupied by the SCK pin on various Arduino boards, +// including Uno, Duemilanove, etc., so use a different pin for those boards. +// +// CAUTION! WARNING! ATTENTION! VORSICHT! ADVARSEL! ¡CUIDADO! ВНИМАНИЕ! +// +#if defined(LED_BUILTIN) +#define LED LED_BUILTIN // Use built in LED +#else +#define LED 9 // Set to something here that makes sense for your board. +#endif + + +// Satisfy IDE, which only needs to see the include statment in the ino. +#ifdef dobogusinclude +#include <spi4teensy3.h> +#include <SPI.h> +#endif + +USB Usb; +ADK adk(&Usb, "TKJElectronics", // Manufacturer Name + "ArduinoBlinkLED", // Model Name + "Example sketch for the USB Host Shield", // Description (user-visible string) + "1.0", // Version + "http://www.tkjelectronics.dk/uploads/ArduinoBlinkLED.apk", // URL (web page to visit if no installed apps support the accessory) + "123456789"); // Serial Number (optional) + +uint32_t timer; +bool connected; + +void setup() { + Serial.begin(115200); +#if !defined(__MIPSEL__) + while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection +#endif + if (Usb.Init() == -1) { + Serial.print("\r\nOSCOKIRQ failed to assert"); + while (1); // halt + } + pinMode(LED, OUTPUT); + Serial.print("\r\nArduino Blink LED Started"); +} + +void loop() { + Usb.Task(); + + if (adk.isReady()) { + if (!connected) { + connected = true; + Serial.print(F("\r\nConnected to accessory")); + } + + uint8_t msg[1]; + uint16_t len = sizeof(msg); + uint8_t rcode = adk.RcvData(&len, msg); + if (rcode && rcode != hrNAK) { + Serial.print(F("\r\nData rcv: ")); + Serial.print(rcode, HEX); + } else if (len > 0) { + Serial.print(F("\r\nData Packet: ")); + Serial.print(msg[0]); + digitalWrite(LED, msg[0] ? HIGH : LOW); + } + + if (millis() - timer >= 1000) { // Send data every 1s + timer = millis(); + rcode = adk.SndData(sizeof(timer), (uint8_t*)&timer); + if (rcode && rcode != hrNAK) { + Serial.print(F("\r\nData send: ")); + Serial.print(rcode, HEX); + } else if (rcode != hrNAK) { + Serial.print(F("\r\nTimer: ")); + Serial.print(timer); + } + } + } else { + if (connected) { + connected = false; + Serial.print(F("\r\nDisconnected from accessory")); + digitalWrite(LED, LOW); + } + } +} diff --git a/lib/usbhost/USB_Host_Shield_2.0/examples/adk/adk_barcode/adk_barcode.ino b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/adk_barcode/adk_barcode.ino new file mode 100644 index 0000000000..a308ff0f83 --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/adk_barcode/adk_barcode.ino @@ -0,0 +1,91 @@ +/**/ +/* A sketch demonstrating data exchange between two USB devices - a HID barcode scanner and ADK-compatible Android phone */ +/**/ +#include <adk.h> +#include <hidboot.h> +#include <usbhub.h> + +// Satisfy IDE, which only needs to see the include statment in the ino. +#ifdef dobogusinclude +#include <spi4teensy3.h> +#include <SPI.h> +#endif + +USB Usb; +USBHub Hub1(&Usb); +USBHub Hub2(&Usb); +HIDBoot<HID_PROTOCOL_KEYBOARD> Keyboard(&Usb); + +ADK adk(&Usb,"Circuits@Home, ltd.", + "USB Host Shield", + "Arduino Terminal for Android", + "1.0", + "http://www.circuitsathome.com", + "0000000000000001"); + + +class KbdRptParser : public KeyboardReportParser +{ + +protected: + void OnKeyDown (uint8_t mod, uint8_t key); + void OnKeyPressed(uint8_t key); +}; + +void KbdRptParser::OnKeyDown(uint8_t mod, uint8_t key) +{ + uint8_t c = OemToAscii(mod, key); + + if (c) + OnKeyPressed(c); +} + +/* what to do when symbol arrives */ +void KbdRptParser::OnKeyPressed(uint8_t key) +{ +const char* new_line = "\n"; +uint8_t rcode; +uint8_t keylcl; + + if( adk.isReady() == false ) { + return; + } + + keylcl = key; + + if( keylcl == 0x13 ) { + rcode = adk.SndData( strlen( new_line ), (uint8_t *)new_line ); + } + else { + rcode = adk.SndData( 1, &keylcl ); + } + + Serial.print((char) keylcl ); + Serial.print(" : "); + Serial.println( keylcl, HEX ); +}; + +KbdRptParser Prs; + +void setup() +{ + Serial.begin(115200); +#if !defined(__MIPSEL__) + while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection +#endif + Serial.println("\r\nADK demo start"); + + if (Usb.Init() == -1) { + Serial.println("OSCOKIRQ failed to assert"); + while(1); //halt + }//if (Usb.Init() == -1... + + Keyboard.SetReportParser(0, (HIDReportParser*)&Prs); + + delay( 200 ); +} + +void loop() +{ + Usb.Task(); +} diff --git a/lib/usbhost/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino new file mode 100644 index 0000000000..f65adf57bb --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino @@ -0,0 +1,103 @@ +#include <adk.h> +#include <usbhub.h> + +// Satisfy IDE, which only needs to see the include statment in the ino. +#ifdef dobogusinclude +#include <spi4teensy3.h> +#include <SPI.h> +#endif + +USB Usb; +USBHub hub0(&Usb); +USBHub hub1(&Usb); +ADK adk(&Usb,"Google, Inc.", + "DemoKit", + "DemoKit Arduino Board", + "1.0", + "http://www.android.com", + "0000000012345678"); +uint8_t b, b1; + + +#define LED1_RED 3 +#define BUTTON1 2 + +void init_buttons() +{ + pinMode(BUTTON1, INPUT); + + // enable the internal pullups + digitalWrite(BUTTON1, HIGH); +} + +void init_leds() +{ + digitalWrite(LED1_RED, 0); + + pinMode(LED1_RED, OUTPUT); +} + +void setup() +{ + Serial.begin(115200); +#if !defined(__MIPSEL__) + while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection +#endif + Serial.println("\r\nADK demo start"); + + if (Usb.Init() == -1) { + Serial.println("OSCOKIRQ failed to assert"); + while(1); //halt + }//if (Usb.Init() == -1... + + + init_leds(); + init_buttons(); + b1 = digitalRead(BUTTON1); +} + +void loop() +{ + uint8_t rcode; + uint8_t msg[3] = { 0x00 }; + Usb.Task(); + + if( adk.isReady() == false ) { + analogWrite(LED1_RED, 255); + return; + } + uint16_t len = sizeof(msg); + + rcode = adk.RcvData(&len, msg); + if( rcode ) { + USBTRACE2("Data rcv. :", rcode ); + } + if(len > 0) { + USBTRACE("\r\nData Packet."); + // assumes only one command per packet + if (msg[0] == 0x2) { + switch( msg[1] ) { + case 0: + analogWrite(LED1_RED, 255 - msg[2]); + break; + }//switch( msg[1]... + }//if (msg[0] == 0x2... + }//if( len > 0... + + msg[0] = 0x1; + + b = digitalRead(BUTTON1); + if (b != b1) { + USBTRACE("\r\nButton state changed"); + msg[1] = 0; + msg[2] = b ? 0 : 1; + rcode = adk.SndData( 3, msg ); + if( rcode ) { + USBTRACE2("Button send: ", rcode ); + } + b1 = b; + }//if (b != b1... + + + delay( 10 ); +} diff --git a/lib/usbhost/USB_Host_Shield_2.0/examples/adk/term_test/term_test.ino b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/term_test/term_test.ino new file mode 100644 index 0000000000..db681c3b50 --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/term_test/term_test.ino @@ -0,0 +1,65 @@ +#include <adk.h> +#include <usbhub.h> + +// Satisfy IDE, which only needs to see the include statment in the ino. +#ifdef dobogusinclude +#include <spi4teensy3.h> +#include <SPI.h> +#endif + +USB Usb; +//USBHub Hub(&Usb); + +ADK adk(&Usb,"Circuits@Home, ltd.", + "USB Host Shield", + "Arduino Terminal for Android", + "1.0", + "http://www.circuitsathome.com", + "0000000000000001"); + +void setup() +{ + Serial.begin(115200); +#if !defined(__MIPSEL__) + while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection +#endif + Serial.println("\r\nADK demo start"); + + if (Usb.Init() == -1) { + Serial.println("OSCOKIRQ failed to assert"); + while(1); //halt + }//if (Usb.Init() == -1... +} + +void loop() +{ + uint8_t rcode; + uint8_t msg[64] = { 0x00 }; + const char* recv = "Received: "; + + Usb.Task(); + + if( adk.isReady() == false ) { + return; + } + uint16_t len = 64; + + rcode = adk.RcvData(&len, msg); + if( rcode & ( rcode != hrNAK )) { + USBTRACE2("Data rcv. :", rcode ); + } + if(len > 0) { + USBTRACE("\r\nData Packet."); + + for( uint8_t i = 0; i < len; i++ ) { + Serial.print((char)msg[i]); + } + /* sending back what was received */ + rcode = adk.SndData( strlen( recv ), (uint8_t *)recv ); + rcode = adk.SndData( strlen(( char * )msg ), msg ); + + }//if( len > 0 )... + + delay( 1000 ); +} + diff --git a/lib/usbhost/USB_Host_Shield_2.0/examples/adk/term_time/term_time.ino b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/term_time/term_time.ino new file mode 100644 index 0000000000..a3f1dbc8cb --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/examples/adk/term_time/term_time.ino @@ -0,0 +1,50 @@ +#include <adk.h> +#include <usbhub.h> + +// Satisfy IDE, which only needs to see the include statment in the ino. +#ifdef dobogusinclude +#include <spi4teensy3.h> +#include <SPI.h> +#endif + +USB Usb; + +ADK adk(&Usb,"Circuits@Home, ltd.", + "USB Host Shield", + "Arduino Terminal for Android", + "1.0", + "http://www.circuitsathome.com", + "0000000000000001"); + +void setup() +{ + Serial.begin(115200); +#if !defined(__MIPSEL__) + while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection +#endif + Serial.println("\r\nADK demo start"); + + if (Usb.Init() == -1) { + Serial.println("OSCOKIRQ failed to assert"); + while(1); //halt + }//if (Usb.Init() == -1... +} + +void loop() +{ + uint8_t buf[ 12 ] = { 0 }; //buffer to convert unsigned long to ASCII + const char* sec_ela = " seconds elapsed\r"; + uint8_t rcode; + + Usb.Task(); + if( adk.isReady() == false ) { + return; + } + + ultoa( millis()/1000, (char *)buf, 10 ); + + rcode = adk.SndData( strlen((char *)buf), buf ); + rcode = adk.SndData( strlen( sec_ela), (uint8_t *)sec_ela ); + + delay( 1000 ); +} |