diff options
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/XPROG')
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c | 274 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h | 86 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c | 468 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h | 140 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c | 480 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h | 136 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c | 209 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h | 136 |
8 files changed, 0 insertions, 1929 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c deleted file mode 100644 index 22eb7d74cb..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Target-related functions for the TINY target's NVM module. - */ - -#define INCLUDE_FROM_TINYNVM_C -#include "TINYNVM.h" - -#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) - -/** Sends the given pointer address to the target's TPI pointer register */ -static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress) -{ - /* Send the given 16-bit address to the target, LSB first */ - XPROGTarget_SendByte(TPI_CMD_SSTPR | 0); - XPROGTarget_SendByte(AbsoluteAddress & 0xFF); - XPROGTarget_SendByte(TPI_CMD_SSTPR | 1); - XPROGTarget_SendByte(AbsoluteAddress >> 8); -} - -/** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written. - * - * \param[in] Address 6-bit I/O address to write to in the target's I/O memory space - */ -static void TINYNVM_SendReadNVMRegister(const uint8_t Address) -{ - /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper - * two bits of the 6-bit address are shifted left once - use function to reduce code size */ - XPROGTarget_SendByte(TPI_CMD_SIN(Address)); -} - -/** Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read. - * - * \param[in] Address 6-bit I/O address to read from in the target's I/O memory space - */ -static void TINYNVM_SendWriteNVMRegister(const uint8_t Address) -{ - /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper - * two bits of the 6-bit address are shifted left once - use function to reduce code size */ - XPROGTarget_SendByte(TPI_CMD_SOUT(Address)); -} - -/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read. - * - * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise - */ -bool TINYNVM_WaitWhileNVMBusBusy(void) -{ - /* Poll the STATUS register to check to see if NVM access has been enabled */ - for (;;) - { - /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */ - XPROGTarget_SendByte(TPI_CMD_SLDCS(TPI_REG_STATUS)); - - uint8_t StatusRegister = XPROGTarget_ReceiveByte(); - - /* We might have timed out waiting for the status register read response, check here */ - if (!(TimeoutTicksRemaining)) - return false; - - /* Check the status register read response to see if the NVM bus is enabled */ - if (StatusRegister & TPI_STATUS_NVM) - return true; - } -} - -/** Waits while the target's NVM controller is busy performing an operation, exiting if the - * timeout period expires. - * - * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise - */ -bool TINYNVM_WaitWhileNVMControllerBusy(void) -{ - /* Poll the STATUS register to check to see if NVM access has been enabled */ - for (;;) - { - /* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */ - TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr); - - uint8_t StatusRegister = XPROGTarget_ReceiveByte(); - - /* We might have timed out waiting for the status register read response, check here */ - if (!(TimeoutTicksRemaining)) - return false; - - /* Check to see if the BUSY flag is still set */ - if (!(StatusRegister & (1 << 7))) - return true; - } -} - -/** Enables the physical TPI interface on the target and enables access to the internal NVM controller. - * - * \return Boolean \c true if the TPI interface was enabled successfully, \c false otherwise - */ -bool TINYNVM_EnableTPI(void) -{ - /* Enable TPI programming mode with the attached target */ - XPROGTarget_EnableTargetTPI(); - - /* Lower direction change guard time to 32 USART bits */ - XPROGTarget_SendByte(TPI_CMD_SSTCS(TPI_REG_CTRL)); - XPROGTarget_SendByte(0x02); - - /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */ - XPROGTarget_SendByte(TPI_CMD_SKEY); - for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--) - XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]); - - /* Wait until the NVM bus becomes active */ - return TINYNVM_WaitWhileNVMBusBusy(); -} - -/** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */ -void TINYNVM_DisableTPI(void) -{ - TINYNVM_WaitWhileNVMBusBusy(); - - do - { - /* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */ - XPROGTarget_SendByte(TPI_CMD_SSTCS(TPI_REG_STATUS)); - XPROGTarget_SendByte(0x00); - - /* Read back the STATUS register, check to see if it took effect */ - XPROGTarget_SendByte(TPI_CMD_SLDCS(TPI_REG_STATUS)); - } while (XPROGTarget_ReceiveByte() != 0x00); - - XPROGTarget_DisableTargetTPI(); -} - -/** Reads memory from the target's memory spaces. - * - * \param[in] ReadAddress Start address to read from within the target's address space - * \param[out] ReadBuffer Buffer to store read data into - * \param[in] ReadSize Length of the data to read from the device - * - * \return Boolean \c true if the command sequence complete successfully - */ -bool TINYNVM_ReadMemory(const uint16_t ReadAddress, - uint8_t* ReadBuffer, - uint16_t ReadSize) -{ - /* Wait until the NVM controller is no longer busy */ - if (!(TINYNVM_WaitWhileNVMControllerBusy())) - return false; - - /* Set the NVM control register to the NO OP command for memory reading */ - TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr); - XPROGTarget_SendByte(TINY_NVM_CMD_NOOP); - - /* Send the address of the location to read from */ - TINYNVM_SendPointerAddress(ReadAddress); - - while (ReadSize-- && TimeoutTicksRemaining) - { - /* Read the byte of data from the target */ - XPROGTarget_SendByte(TPI_CMD_SLD(TPI_POINTER_INDIRECT_PI)); - *(ReadBuffer++) = XPROGTarget_ReceiveByte(); - } - - return (TimeoutTicksRemaining > 0); -} - -/** Writes word addressed memory to the target's memory spaces. - * - * \param[in] WriteAddress Start address to write to within the target's address space - * \param[in] WriteBuffer Buffer to source data from - * \param[in] WriteLength Total number of bytes to write to the device (must be an integer multiple of 2) - * - * \return Boolean \c true if the command sequence complete successfully - */ -bool TINYNVM_WriteMemory(const uint16_t WriteAddress, - uint8_t* WriteBuffer, - uint16_t WriteLength) -{ - /* Wait until the NVM controller is no longer busy */ - if (!(TINYNVM_WaitWhileNVMControllerBusy())) - return false; - - /* Must have an integer number of words to write - if extra byte, word-align via a dummy high byte */ - if (WriteLength & 0x01) - WriteBuffer[WriteLength++] = 0xFF; - - /* Set the NVM control register to the WORD WRITE command for memory writing */ - TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr); - XPROGTarget_SendByte(TINY_NVM_CMD_WORDWRITE); - - /* Send the address of the location to write to */ - TINYNVM_SendPointerAddress(WriteAddress); - - while (WriteLength) - { - /* Wait until the NVM controller is no longer busy */ - if (!(TINYNVM_WaitWhileNVMControllerBusy())) - return false; - - /* Write the low byte of data to the target */ - XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT_PI)); - XPROGTarget_SendByte(*(WriteBuffer++)); - - /* Write the high byte of data to the target */ - XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT_PI)); - XPROGTarget_SendByte(*(WriteBuffer++)); - - /* Need to decrement the write length twice, since we wrote a whole two-byte word */ - WriteLength -= 2; - } - - return true; -} - -/** Erases the target's memory space. - * - * \param[in] EraseCommand NVM erase command to send to the device - * \param[in] Address Address inside the memory space to erase - * - * \return Boolean \c true if the command sequence complete successfully - */ -bool TINYNVM_EraseMemory(const uint8_t EraseCommand, - const uint16_t Address) -{ - /* Wait until the NVM controller is no longer busy */ - if (!(TINYNVM_WaitWhileNVMControllerBusy())) - return false; - - /* Set the NVM control register to the target memory erase command */ - TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr); - XPROGTarget_SendByte(EraseCommand); - - /* Write to a high byte location within the target address space to start the erase process */ - TINYNVM_SendPointerAddress(Address | 0x0001); - XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT)); - XPROGTarget_SendByte(0x00); - - /* Wait until the NVM controller is no longer busy */ - if (!(TINYNVM_WaitWhileNVMControllerBusy())) - return false; - - return true; -} - -#endif - diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h deleted file mode 100644 index 61389bb455..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for TINYNVM.c. - */ - -#ifndef _TINY_NVM_ -#define _TINY_NVM_ - - /* Includes: */ - #include <avr/io.h> - #include <avr/interrupt.h> - #include <stdbool.h> - - #include <LUFA/Common/Common.h> - - #include "XPROGProtocol.h" - #include "XPROGTarget.h" - #include "Config/AppConfig.h" - - /* Preprocessor Checks: */ - #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) - #undef ENABLE_ISP_PROTOCOL - - #if !defined(ENABLE_XPROG_PROTOCOL) - #define ENABLE_XPROG_PROTOCOL - #endif - #endif - - /* Defines: */ - #define TINY_NVM_CMD_NOOP 0x00 - #define TINY_NVM_CMD_CHIPERASE 0x10 - #define TINY_NVM_CMD_SECTIONERASE 0x14 - #define TINY_NVM_CMD_WORDWRITE 0x1D - - /* Function Prototypes: */ - bool TINYNVM_WaitWhileNVMBusBusy(void); - bool TINYNVM_WaitWhileNVMControllerBusy(void); - bool TINYNVM_EnableTPI(void); - void TINYNVM_DisableTPI(void); - bool TINYNVM_ReadMemory(const uint16_t ReadAddress, - uint8_t* ReadBuffer, - uint16_t ReadLength); - bool TINYNVM_WriteMemory(const uint16_t WriteAddress, - uint8_t* WriteBuffer, - uint16_t WriteLength); - bool TINYNVM_EraseMemory(const uint8_t EraseCommand, - const uint16_t Address); - - #if (defined(INCLUDE_FROM_TINYNVM_C) && defined(ENABLE_XPROG_PROTOCOL)) - static void TINYNVM_SendReadNVMRegister(const uint8_t Address); - static void TINYNVM_SendWriteNVMRegister(const uint8_t Address); - static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress); - #endif - -#endif - diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c deleted file mode 100644 index 0208a634b7..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c +++ /dev/null @@ -1,468 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Target-related functions for the XMEGA target's NVM module. - */ - -#define INCLUDE_FROM_XMEGA_NVM_C -#include "XMEGANVM.h" - -#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) - -/** Sends the given 32-bit absolute address to the target. - * - * \param[in] AbsoluteAddress Absolute address to send to the target - */ -static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress) -{ - /* Send the given 32-bit address to the target, LSB first */ - XPROGTarget_SendByte(AbsoluteAddress & 0xFF); - XPROGTarget_SendByte(AbsoluteAddress >> 8); - XPROGTarget_SendByte(AbsoluteAddress >> 16); - XPROGTarget_SendByte(AbsoluteAddress >> 24); -} - -/** Sends the given NVM register address to the target. - * - * \param[in] Register NVM register whose absolute address is to be sent - */ -static void XMEGANVM_SendNVMRegAddress(const uint8_t Register) -{ - /* Determine the absolute register address from the NVM base memory address and the NVM register address */ - uint32_t Address = XPROG_Param_NVMBase | Register; - - /* Send the calculated 32-bit address to the target, LSB first */ - XMEGANVM_SendAddress(Address); -} - -/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC - * calculation. - * - * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise - */ -bool XMEGANVM_WaitWhileNVMBusBusy(void) -{ - /* Poll the STATUS register to check to see if NVM access has been enabled */ - for (;;) - { - /* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */ - XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_STATUS)); - - uint8_t StatusRegister = XPROGTarget_ReceiveByte(); - - /* We might have timed out waiting for the status register read response, check here */ - if (!(TimeoutTicksRemaining)) - return false; - - /* Check the status register read response to see if the NVM bus is enabled */ - if (StatusRegister & PDI_STATUS_NVM) - return true; - } -} - -/** Waits while the target's NVM controller is busy performing an operation, exiting if the - * timeout period expires. - * - * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise - */ -bool XMEGANVM_WaitWhileNVMControllerBusy(void) -{ - /* Preload the pointer register with the NVM STATUS register address to check the BUSY flag */ - XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS); - - /* Poll the NVM STATUS register while the NVM controller is busy */ - for (;;) - { - /* Fetch the current status value via the pointer register (without auto-increment afterwards) */ - XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT, PDI_DATASIZE_1BYTE)); - - uint8_t StatusRegister = XPROGTarget_ReceiveByte(); - - /* We might have timed out waiting for the status register read response, check here */ - if (!(TimeoutTicksRemaining)) - return false; - - /* Check to see if the BUSY flag is still set */ - if (!(StatusRegister & (1 << 7))) - return true; - } -} - -/** Enables the physical PDI interface on the target and enables access to the internal NVM controller. - * - * \return Boolean \c true if the PDI interface was enabled successfully, \c false otherwise - */ -bool XMEGANVM_EnablePDI(void) -{ - /* Enable PDI programming mode with the attached target */ - XPROGTarget_EnableTargetPDI(); - - /* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */ - XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET)); - XPROGTarget_SendByte(PDI_RESET_KEY); - - /* Lower direction change guard time to 32 USART bits */ - XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_CTRL)); - XPROGTarget_SendByte(0x02); - - /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */ - XPROGTarget_SendByte(PDI_CMD_KEY); - for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--) - XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]); - - /* Wait until the NVM bus becomes active */ - return XMEGANVM_WaitWhileNVMBusBusy(); -} - -/** Removes access to the target's NVM controller and physically disables the target's physical PDI interface. */ -void XMEGANVM_DisablePDI(void) -{ - XMEGANVM_WaitWhileNVMBusBusy(); - - /* Clear the RESET key in the RESET PDI register to allow the XMEGA to run - must perform this until the - * change takes effect, as in some cases it takes multiple writes (silicon bug?). - */ - do - { - /* Clear reset register */ - XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET)); - XPROGTarget_SendByte(0x00); - - /* Read back the reset register, check to see if it took effect */ - XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_RESET)); - } while (XPROGTarget_ReceiveByte() != 0x00); - - XPROGTarget_DisableTargetPDI(); -} - -/** Retrieves the CRC value of the given memory space. - * - * \param[in] CRCCommand NVM CRC command to issue to the target - * \param[out] CRCDest CRC Destination when read from the target - * - * \return Boolean \c true if the command sequence complete successfully - */ -bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, - uint32_t* const CRCDest) -{ - *CRCDest = 0; - - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* Set the NVM command to the correct CRC read command */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(CRCCommand); - - /* Set CMDEX bit in NVM CTRLA register to start the CRC generation */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); - XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); - - /* Wait until the NVM bus is ready again */ - if (!(XMEGANVM_WaitWhileNVMBusBusy())) - return false; - - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* Load the PDI pointer register with the DAT0 register start address */ - XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0); - - /* Send the REPEAT command to grab the CRC bytes */ - XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE)); - XPROGTarget_SendByte(XMEGA_CRC_LENGTH_BYTES - 1); - - /* Read in the CRC bytes from the target */ - XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE)); - for (uint8_t i = 0; i < XMEGA_CRC_LENGTH_BYTES; i++) - ((uint8_t*)CRCDest)[i] = XPROGTarget_ReceiveByte(); - - return (TimeoutTicksRemaining > 0); -} - -/** Reads memory from the target's memory spaces. - * - * \param[in] ReadAddress Start address to read from within the target's address space - * \param[out] ReadBuffer Buffer to store read data into - * \param[in] ReadSize Number of bytes to read - * - * \return Boolean \c true if the command sequence complete successfully - */ -bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, - uint8_t* ReadBuffer, - uint16_t ReadSize) -{ - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* Send the READNVM command to the NVM controller for reading of an arbitrary location */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(XMEGA_NVM_CMD_READNVM); - - if (ReadSize > 1) - { - /* Load the PDI pointer register with the start address we want to read from */ - XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); - XMEGANVM_SendAddress(ReadAddress); - - /* Send the REPEAT command with the specified number of bytes to read */ - XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE)); - XPROGTarget_SendByte(ReadSize - 1); - - /* Send a LD command with indirect access and post-increment to read out the bytes */ - XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE)); - while (ReadSize-- && TimeoutTicksRemaining) - *(ReadBuffer++) = XPROGTarget_ReceiveByte(); - } - else - { - /* Send a LDS command with the read address to read out the requested byte */ - XPROGTarget_SendByte(PDI_CMD_LDS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendAddress(ReadAddress); - *(ReadBuffer++) = XPROGTarget_ReceiveByte(); - } - - return (TimeoutTicksRemaining > 0); -} - -/** Writes byte addressed memory to the target's memory spaces. - * - * \param[in] WriteCommand Command to send to the device to write each memory byte - * \param[in] WriteAddress Address to write to within the target's address space - * \param[in] Byte Byte to write to the target - * - * \return Boolean \c true if the command sequence complete successfully - */ -bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, - const uint32_t WriteAddress, - const uint8_t Byte) -{ - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* Send the memory write command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(WriteCommand); - - /* Send new memory byte to the memory of the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendAddress(WriteAddress); - XPROGTarget_SendByte(Byte); - - return true; -} - -/** Writes page addressed memory to the target's memory spaces. - * - * \param[in] WriteBuffCommand Command to send to the device to write a byte to the memory page buffer - * \param[in] EraseBuffCommand Command to send to the device to erase the memory page buffer - * \param[in] WritePageCommand Command to send to the device to write the page buffer to the destination memory - * \param[in] PageMode Bitfield indicating what operations need to be executed on the specified page - * \param[in] WriteAddress Start address to write the page data to within the target's address space - * \param[in] WriteBuffer Buffer to source data from - * \param[in] WriteSize Number of bytes to write - * - * \return Boolean \c true if the command sequence complete successfully - */ -bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, - const uint8_t EraseBuffCommand, - const uint8_t WritePageCommand, - const uint8_t PageMode, - const uint32_t WriteAddress, - const uint8_t* WriteBuffer, - uint16_t WriteSize) -{ - if (PageMode & XPROG_PAGEMODE_ERASE) - { - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* Send the memory buffer erase command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(EraseBuffCommand); - - /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); - XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); - } - - if (WriteSize) - { - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* Send the memory buffer write command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(WriteBuffCommand); - - /* Load the PDI pointer register with the start address we want to write to */ - XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); - XMEGANVM_SendAddress(WriteAddress); - - /* Send the REPEAT command with the specified number of bytes to write */ - XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE)); - XPROGTarget_SendByte(WriteSize - 1); - - /* Send a ST command with indirect access and post-increment to write the bytes */ - XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE)); - while (WriteSize--) - XPROGTarget_SendByte(*(WriteBuffer++)); - } - - if (PageMode & XPROG_PAGEMODE_WRITE) - { - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* Send the memory write command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(WritePageCommand); - - /* Send the address of the first page location to write the memory page */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendAddress(WriteAddress); - XPROGTarget_SendByte(0x00); - } - - return true; -} - -/** Erases a specific memory space of the target. - * - * \param[in] EraseCommand NVM erase command to send to the device - * \param[in] Address Address inside the memory space to erase - * - * \return Boolean \c true if the command sequence complete successfully - */ -bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, - const uint32_t Address) -{ - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* EEPROM and Chip erasures are triggered differently to FLASH section erasures */ - if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE) - { - /* Send the memory erase command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(EraseCommand); - - /* Set CMDEX bit in NVM CTRLA register to start the erase sequence */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); - XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); - } - else if (EraseCommand == XMEGA_NVM_CMD_ERASEEEPROM) - { - /* Send the EEPROM page buffer erase command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF); - - /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); - XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); - - /* Wait until the NVM controller is no longer busy */ - if (!(XMEGANVM_WaitWhileNVMControllerBusy())) - return false; - - /* Send the EEPROM memory buffer write command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF); - - /* Load the PDI pointer register with the EEPROM page start address */ - XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); - XMEGANVM_SendAddress(Address); - - /* Send the REPEAT command with the specified number of bytes to write */ - XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE)); - XPROGTarget_SendByte(XPROG_Param_EEPageSize - 1); - - /* Send a ST command with indirect access and post-increment to tag each byte in the EEPROM page buffer */ - XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE)); - for (uint8_t PageByte = 0; PageByte < XPROG_Param_EEPageSize; PageByte++) - XPROGTarget_SendByte(0x00); - - /* Send the memory erase command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(EraseCommand); - - /* Set CMDEX bit in NVM CTRLA register to start the EEPROM erase sequence */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); - XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); - } - else - { - /* Send the memory erase command to the target */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); - XPROGTarget_SendByte(EraseCommand); - - /* Other erase modes just need us to address a byte within the target memory space */ - XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); - XMEGANVM_SendAddress(Address); - XPROGTarget_SendByte(0x00); - } - - /* Wait until the NVM bus is ready again */ - if (!(XMEGANVM_WaitWhileNVMBusBusy())) - return false; - - return true; -} - -#endif - diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h deleted file mode 100644 index 8a8c5b048a..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for XMEGANVM.c. - */ - -#ifndef _XMEGA_NVM_ -#define _XMEGA_NVM_ - - /* Includes: */ - #include <avr/io.h> - #include <avr/interrupt.h> - #include <stdbool.h> - - #include <LUFA/Common/Common.h> - - #include "XPROGProtocol.h" - #include "XPROGTarget.h" - #include "Config/AppConfig.h" - - /* Preprocessor Checks: */ - #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) - #undef ENABLE_ISP_PROTOCOL - - #if !defined(ENABLE_XPROG_PROTOCOL) - #define ENABLE_XPROG_PROTOCOL - #endif - #endif - - /* Defines: */ - #define XMEGA_CRC_LENGTH_BYTES 3 - - #define XMEGA_NVM_REG_ADDR0 0x00 - #define XMEGA_NVM_REG_ADDR1 0x01 - #define XMEGA_NVM_REG_ADDR2 0x02 - #define XMEGA_NVM_REG_DAT0 0x04 - #define XMEGA_NVM_REG_DAT1 0x05 - #define XMEGA_NVM_REG_DAT2 0x06 - #define XMEGA_NVM_REG_CMD 0x0A - #define XMEGA_NVM_REG_CTRLA 0x0B - #define XMEGA_NVM_REG_CTRLB 0x0C - #define XMEGA_NVM_REG_INTCTRL 0x0D - #define XMEGA_NVM_REG_STATUS 0x0F - #define XMEGA_NVM_REG_LOCKBITS 0x10 - - #define XMEGA_NVM_BIT_CTRLA_CMDEX (1 << 0) - - #define XMEGA_NVM_CMD_NOOP 0x00 - #define XMEGA_NVM_CMD_CHIPERASE 0x40 - #define XMEGA_NVM_CMD_READNVM 0x43 - #define XMEGA_NVM_CMD_LOADFLASHPAGEBUFF 0x23 - #define XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF 0x26 - #define XMEGA_NVM_CMD_ERASEFLASHPAGE 0x2B - #define XMEGA_NVM_CMD_WRITEFLASHPAGE 0x2E - #define XMEGA_NVM_CMD_ERASEWRITEFLASH 0x2F - #define XMEGA_NVM_CMD_FLASHCRC 0x78 - #define XMEGA_NVM_CMD_ERASEAPPSEC 0x20 - #define XMEGA_NVM_CMD_ERASEAPPSECPAGE 0x22 - #define XMEGA_NVM_CMD_WRITEAPPSECPAGE 0x24 - #define XMEGA_NVM_CMD_ERASEWRITEAPPSECPAGE 0x25 - #define XMEGA_NVM_CMD_APPCRC 0x38 - #define XMEGA_NVM_CMD_ERASEBOOTSEC 0x68 - #define XMEGA_NVM_CMD_ERASEBOOTSECPAGE 0x2A - #define XMEGA_NVM_CMD_WRITEBOOTSECPAGE 0x2C - #define XMEGA_NVM_CMD_ERASEWRITEBOOTSECPAGE 0x2D - #define XMEGA_NVM_CMD_BOOTCRC 0x39 - #define XMEGA_NVM_CMD_READUSERSIG 0x03 - #define XMEGA_NVM_CMD_ERASEUSERSIG 0x18 - #define XMEGA_NVM_CMD_WRITEUSERSIG 0x1A - #define XMEGA_NVM_CMD_READCALIBRATION 0x02 - #define XMEGA_NVM_CMD_READFUSE 0x07 - #define XMEGA_NVM_CMD_WRITEFUSE 0x4C - #define XMEGA_NVM_CMD_WRITELOCK 0x08 - #define XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF 0x33 - #define XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF 0x36 - #define XMEGA_NVM_CMD_ERASEEEPROM 0x30 - #define XMEGA_NVM_CMD_ERASEEEPROMPAGE 0x32 - #define XMEGA_NVM_CMD_WRITEEEPROMPAGE 0x34 - #define XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE 0x35 - #define XMEGA_NVM_CMD_READEEPROM 0x06 - - /* Function Prototypes: */ - bool XMEGANVM_WaitWhileNVMBusBusy(void); - bool XMEGANVM_WaitWhileNVMControllerBusy(void); - bool XMEGANVM_EnablePDI(void); - void XMEGANVM_DisablePDI(void); - bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, - uint32_t* const CRCDest); - bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, - uint8_t* ReadBuffer, - uint16_t ReadSize); - bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, - const uint32_t WriteAddress, - const uint8_t Byte); - bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, - const uint8_t EraseBuffCommand, - const uint8_t WritePageCommand, - const uint8_t PageMode, - const uint32_t WriteAddress, - const uint8_t* WriteBuffer, - uint16_t WriteSize); - bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, - const uint32_t Address); - - #if defined(INCLUDE_FROM_XMEGANVM_C) - static void XMEGANVM_SendNVMRegAddress(const uint8_t Register); - static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress); - #endif - -#endif - diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c deleted file mode 100644 index aa5503f3ff..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c +++ /dev/null @@ -1,480 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices. - */ - -#define INCLUDE_FROM_XPROGPROTOCOL_C -#include "XPROGProtocol.h" - -#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) -/** Base absolute address for the target's NVM controller for PDI programming */ -uint32_t XPROG_Param_NVMBase = 0x010001C0; - -/** Size in bytes of the target's EEPROM page */ -uint16_t XPROG_Param_EEPageSize = 32; - -/** Address of the TPI device's NVMCMD register for TPI programming */ -uint8_t XPROG_Param_NVMCMDRegAddr = 0x33; - -/** Address of the TPI device's NVMCSR register for TPI programming */ -uint8_t XPROG_Param_NVMCSRRegAddr = 0x32; - -/** Currently selected XPROG programming protocol */ -uint8_t XPROG_SelectedProtocol = XPROG_PROTOCOL_PDI; - -/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI - * programming. - */ -void XPROGProtocol_SetMode(void) -{ - struct - { - uint8_t Protocol; - } SetMode_XPROG_Params; - - Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL); - - Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol; - - Endpoint_Write_8(CMD_XPROG_SETMODE); - Endpoint_Write_8((SetMode_XPROG_Params.Protocol != XPROG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED); - Endpoint_ClearIN(); -} - -/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be - * removed and processed so that the underlying XPROG command can be handled. - */ -void XPROGProtocol_Command(void) -{ - uint8_t XPROGCommand = Endpoint_Read_8(); - - switch (XPROGCommand) - { - case XPROG_CMD_ENTER_PROGMODE: - XPROGProtocol_EnterXPROGMode(); - break; - case XPROG_CMD_LEAVE_PROGMODE: - XPROGProtocol_LeaveXPROGMode(); - break; - case XPROG_CMD_ERASE: - XPROGProtocol_Erase(); - break; - case XPROG_CMD_WRITE_MEM: - XPROGProtocol_WriteMemory(); - break; - case XPROG_CMD_READ_MEM: - XPROGProtocol_ReadMemory(); - break; - case XPROG_CMD_CRC: - XPROGProtocol_ReadCRC(); - break; - case XPROG_CMD_SET_PARAM: - XPROGProtocol_SetParam(); - break; - } -} - -/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */ -static void XPROGProtocol_EnterXPROGMode(void) -{ - Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - bool NVMBusEnabled = false; - - if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) - NVMBusEnabled = XMEGANVM_EnablePDI(); - else if (XPROG_SelectedProtocol == XPROG_PROTOCOL_TPI) - NVMBusEnabled = TINYNVM_EnableTPI(); - - Endpoint_Write_8(CMD_XPROG); - Endpoint_Write_8(XPROG_CMD_ENTER_PROGMODE); - Endpoint_Write_8(NVMBusEnabled ? XPROG_ERR_OK : XPROG_ERR_FAILED); - Endpoint_ClearIN(); -} - -/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with - * the attached device. - */ -static void XPROGProtocol_LeaveXPROGMode(void) -{ - Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) - XMEGANVM_DisablePDI(); - else - TINYNVM_DisableTPI(); - - #if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL) - /* If the XCK rescue clock option is enabled, we need to restart it once the - * XPROG mode has been exited, since the XPROG protocol stops it after use. */ - ISPTarget_ConfigureRescueClock(); - #endif - - Endpoint_Write_8(CMD_XPROG); - Endpoint_Write_8(XPROG_CMD_LEAVE_PROGMODE); - Endpoint_Write_8(XPROG_ERR_OK); - Endpoint_ClearIN(); -} - -/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */ -static void XPROGProtocol_Erase(void) -{ - uint8_t ReturnStatus = XPROG_ERR_OK; - - struct - { - uint8_t MemoryType; - uint32_t Address; - } Erase_XPROG_Params; - - Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params), NULL); - Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address); - - Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - uint8_t EraseCommand; - - if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) - { - /* Determine which NVM command to send to the device depending on the memory to erase */ - switch (Erase_XPROG_Params.MemoryType) - { - case XPROG_ERASE_CHIP: - EraseCommand = XMEGA_NVM_CMD_CHIPERASE; - break; - case XPROG_ERASE_APP: - EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC; - break; - case XPROG_ERASE_BOOT: - EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC; - break; - case XPROG_ERASE_EEPROM: - EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM; - break; - case XPROG_ERASE_APP_PAGE: - EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE; - break; - case XPROG_ERASE_BOOT_PAGE: - EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE; - break; - case XPROG_ERASE_EEPROM_PAGE: - EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE; - break; - case XPROG_ERASE_USERSIG: - EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG; - break; - default: - EraseCommand = XMEGA_NVM_CMD_NOOP; - break; - } - - /* Erase the target memory, indicate timeout if occurred */ - if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) - ReturnStatus = XPROG_ERR_TIMEOUT; - } - else - { - if (Erase_XPROG_Params.MemoryType == XPROG_ERASE_CHIP) - EraseCommand = TINY_NVM_CMD_CHIPERASE; - else - EraseCommand = TINY_NVM_CMD_SECTIONERASE; - - /* Erase the target memory, indicate timeout if occurred */ - if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) - ReturnStatus = XPROG_ERR_TIMEOUT; - } - - Endpoint_Write_8(CMD_XPROG); - Endpoint_Write_8(XPROG_CMD_ERASE); - Endpoint_Write_8(ReturnStatus); - Endpoint_ClearIN(); -} - -/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */ -static void XPROGProtocol_WriteMemory(void) -{ - uint8_t ReturnStatus = XPROG_ERR_OK; - - struct - { - uint8_t MemoryType; - uint8_t PageMode; - uint32_t Address; - uint16_t Length; - uint8_t ProgData[256]; - } WriteMemory_XPROG_Params; - - Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) - - sizeof(WriteMemory_XPROG_Params).ProgData), NULL); - WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address); - WriteMemory_XPROG_Params.Length = SwapEndian_16(WriteMemory_XPROG_Params.Length); - Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NULL); - - // The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need - // to catch this and discard it before continuing on with packet processing to prevent communication issues - if (((sizeof(uint8_t) + sizeof(WriteMemory_XPROG_Params) - sizeof(WriteMemory_XPROG_Params.ProgData)) + - WriteMemory_XPROG_Params.Length) % AVRISP_DATA_EPSIZE == 0) - { - Endpoint_ClearOUT(); - Endpoint_WaitUntilReady(); - } - - Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) - { - /* Assume FLASH page programming by default, as it is the common case */ - uint8_t WriteCommand = XMEGA_NVM_CMD_WRITEFLASHPAGE; - uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF; - uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF; - bool PagedMemory = true; - - switch (WriteMemory_XPROG_Params.MemoryType) - { - case XPROG_MEM_TYPE_APPL: - WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE; - break; - case XPROG_MEM_TYPE_BOOT: - WriteCommand = XMEGA_NVM_CMD_WRITEBOOTSECPAGE; - break; - case XPROG_MEM_TYPE_EEPROM: - WriteCommand = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE; - WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF; - EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF; - break; - case XPROG_MEM_TYPE_USERSIG: - WriteCommand = XMEGA_NVM_CMD_WRITEUSERSIG; - break; - case XPROG_MEM_TYPE_FUSE: - WriteCommand = XMEGA_NVM_CMD_WRITEFUSE; - PagedMemory = false; - break; - case XPROG_MEM_TYPE_LOCKBITS: - WriteCommand = XMEGA_NVM_CMD_WRITELOCK; - PagedMemory = false; - break; - } - - /* Send the appropriate memory write commands to the device, indicate timeout if occurred */ - if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand, - WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address, - WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) || - (!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address, - WriteMemory_XPROG_Params.ProgData[0])))) - { - ReturnStatus = XPROG_ERR_TIMEOUT; - } - } - else - { - /* Send write command to the TPI device, indicate timeout if occurred */ - if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData, - WriteMemory_XPROG_Params.Length))) - { - ReturnStatus = XPROG_ERR_TIMEOUT; - } - } - - Endpoint_Write_8(CMD_XPROG); - Endpoint_Write_8(XPROG_CMD_WRITE_MEM); - Endpoint_Write_8(ReturnStatus); - Endpoint_ClearIN(); -} - -/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the - * attached device. - */ -static void XPROGProtocol_ReadMemory(void) -{ - uint8_t ReturnStatus = XPROG_ERR_OK; - - struct - { - uint8_t MemoryType; - uint32_t Address; - uint16_t Length; - } ReadMemory_XPROG_Params; - - Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NULL); - ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address); - ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length); - - Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - uint8_t ReadBuffer[256]; - - if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) - { - /* Read the PDI target's memory, indicate timeout if occurred */ - if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length))) - ReturnStatus = XPROG_ERR_TIMEOUT; - } - else - { - /* Read the TPI target's memory, indicate timeout if occurred */ - if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length))) - ReturnStatus = XPROG_ERR_TIMEOUT; - } - - Endpoint_Write_8(CMD_XPROG); - Endpoint_Write_8(XPROG_CMD_READ_MEM); - Endpoint_Write_8(ReturnStatus); - - if (ReturnStatus == XPROG_ERR_OK) - Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NULL); - - Endpoint_ClearIN(); -} - -/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the - * attached device's memory and a data set on the host. - */ -static void XPROGProtocol_ReadCRC(void) -{ - uint8_t ReturnStatus = XPROG_ERR_OK; - - struct - { - uint8_t CRCType; - } ReadCRC_XPROG_Params; - - Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL); - - Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - uint32_t MemoryCRC; - - if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) - { - uint8_t CRCCommand; - - /* Determine which NVM command to send to the device depending on the memory to CRC */ - switch (ReadCRC_XPROG_Params.CRCType) - { - case XPROG_CRC_APP: - CRCCommand = XMEGA_NVM_CMD_APPCRC; - break; - case XPROG_CRC_BOOT: - CRCCommand = XMEGA_NVM_CMD_BOOTCRC; - break; - default: - CRCCommand = XMEGA_NVM_CMD_FLASHCRC; - break; - } - - /* Perform and retrieve the memory CRC, indicate timeout if occurred */ - if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC))) - ReturnStatus = XPROG_ERR_TIMEOUT; - } - else - { - /* TPI does not support memory CRC */ - ReturnStatus = XPROG_ERR_FAILED; - } - - Endpoint_Write_8(CMD_XPROG); - Endpoint_Write_8(XPROG_CMD_CRC); - Endpoint_Write_8(ReturnStatus); - - if (ReturnStatus == XPROG_ERR_OK) - { - Endpoint_Write_8(MemoryCRC >> 16); - Endpoint_Write_16_LE(MemoryCRC & 0xFFFF); - } - - Endpoint_ClearIN(); -} - -/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the - * attached device. - */ -static void XPROGProtocol_SetParam(void) -{ - uint8_t ReturnStatus = XPROG_ERR_OK; - - uint8_t XPROGParam = Endpoint_Read_8(); - - /* Determine which parameter is being set, store the new parameter value */ - switch (XPROGParam) - { - case XPROG_PARAM_NVMBASE: - XPROG_Param_NVMBase = Endpoint_Read_32_BE(); - break; - case XPROG_PARAM_EEPPAGESIZE: - XPROG_Param_EEPageSize = Endpoint_Read_16_BE(); - break; - case XPROG_PARAM_NVMCMD_REG: - XPROG_Param_NVMCMDRegAddr = Endpoint_Read_8(); - break; - case XPROG_PARAM_NVMCSR_REG: - XPROG_Param_NVMCSRRegAddr = Endpoint_Read_8(); - break; - case XPROG_PARAM_UNKNOWN_1: - /* TODO: Undocumented parameter added in AVRStudio 5.1, purpose unknown. Must ACK and discard or - the communication with AVRStudio 5.1 will fail. - */ - Endpoint_Discard_16(); - break; - default: - ReturnStatus = XPROG_ERR_FAILED; - break; - } - - Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); - Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); - - Endpoint_Write_8(CMD_XPROG); - Endpoint_Write_8(XPROG_CMD_SET_PARAM); - Endpoint_Write_8(ReturnStatus); - Endpoint_ClearIN(); -} - -#endif - diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h deleted file mode 100644 index e35a1e4a19..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for XPROGProtocol.c. - */ - -#ifndef _XPROG_PROTOCOL_ -#define _XPROG_PROTOCOL_ - - /* Includes: */ - #include <avr/io.h> - #include <util/delay.h> - #include <stdio.h> - - #include <LUFA/Drivers/USB/USB.h> - - #include "../V2Protocol.h" - #include "XMEGANVM.h" - #include "TINYNVM.h" - #include "Config/AppConfig.h" - - /* Preprocessor Checks: */ - #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) - /* On the XPLAIN board, we only need PDI programming - for the ATXMEGA128A1 - disable ISP to prevent hardware - damage and force-enable XPROG. - */ - #undef ENABLE_ISP_PROTOCOL - - #if !defined(ENABLE_XPROG_PROTOCOL) - #define ENABLE_XPROG_PROTOCOL - #endif - #endif - - /* Macros: */ - #define XPROG_CMD_ENTER_PROGMODE 0x01 - #define XPROG_CMD_LEAVE_PROGMODE 0x02 - #define XPROG_CMD_ERASE 0x03 - #define XPROG_CMD_WRITE_MEM 0x04 - #define XPROG_CMD_READ_MEM 0x05 - #define XPROG_CMD_CRC 0x06 - #define XPROG_CMD_SET_PARAM 0x07 - - #define XPROG_MEM_TYPE_APPL 1 - #define XPROG_MEM_TYPE_BOOT 2 - #define XPROG_MEM_TYPE_EEPROM 3 - #define XPROG_MEM_TYPE_FUSE 4 - #define XPROG_MEM_TYPE_LOCKBITS 5 - #define XPROG_MEM_TYPE_USERSIG 6 - #define XPROG_MEM_TYPE_FACTORY_CALIBRATION 7 - - #define XPROG_ERASE_CHIP 1 - #define XPROG_ERASE_APP 2 - #define XPROG_ERASE_BOOT 3 - #define XPROG_ERASE_EEPROM 4 - #define XPROG_ERASE_APP_PAGE 5 - #define XPROG_ERASE_BOOT_PAGE 6 - #define XPROG_ERASE_EEPROM_PAGE 7 - #define XPROG_ERASE_USERSIG 8 - - #define XPROG_MEM_WRITE_ERASE 0 - #define XPROG_MEM_WRITE_WRITE 1 - - #define XPROG_CRC_APP 1 - #define XPROG_CRC_BOOT 2 - #define XPROG_CRC_FLASH 3 - - #define XPROG_ERR_OK 0 - #define XPROG_ERR_FAILED 1 - #define XPROG_ERR_COLLISION 2 - #define XPROG_ERR_TIMEOUT 3 - - #define XPROG_PARAM_NVMBASE 0x01 - #define XPROG_PARAM_EEPPAGESIZE 0x02 - #define XPROG_PARAM_NVMCMD_REG 0x03 - #define XPROG_PARAM_NVMCSR_REG 0x04 - #define XPROG_PARAM_UNKNOWN_1 0x05 - - #define XPROG_PROTOCOL_PDI 0x00 - #define XPROG_PROTOCOL_JTAG 0x01 - #define XPROG_PROTOCOL_TPI 0x02 - - #define XPROG_PAGEMODE_WRITE (1 << 1) - #define XPROG_PAGEMODE_ERASE (1 << 0) - - /* External Variables: */ - extern uint32_t XPROG_Param_NVMBase; - extern uint16_t XPROG_Param_EEPageSize; - extern uint8_t XPROG_Param_NVMCSRRegAddr; - extern uint8_t XPROG_Param_NVMCMDRegAddr; - - /* Function Prototypes: */ - void XPROGProtocol_SetMode(void); - void XPROGProtocol_Command(void); - - #if (defined(INCLUDE_FROM_XPROGPROTOCOL_C) && defined(ENABLE_XPROG_PROTOCOL)) - static void XPROGProtocol_EnterXPROGMode(void); - static void XPROGProtocol_LeaveXPROGMode(void); - static void XPROGProtocol_SetParam(void); - static void XPROGProtocol_Erase(void); - static void XPROGProtocol_WriteMemory(void); - static void XPROGProtocol_ReadMemory(void); - static void XPROGProtocol_ReadCRC(void); - #endif - -#endif - diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c deleted file mode 100644 index 0455329c3d..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Target-related functions for the PDI Protocol decoder. - */ - -#define INCLUDE_FROM_XPROGTARGET_C -#include "XPROGTarget.h" - -#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) - -/** Flag to indicate if the USART is currently in Tx or Rx mode. */ -bool IsSending; - -/** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */ -void XPROGTarget_EnableTargetPDI(void) -{ - IsSending = false; - - /* Set Tx and XCK as outputs, Rx as input */ - DDRD |= (1 << 5) | (1 << 3); - DDRD &= ~(1 << 2); - - /* Set DATA line high for at least 90ns to disable /RESET functionality */ - PORTD |= (1 << 3); - _delay_us(100); - - /* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */ - UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1); - UCSR1B = (1 << TXEN1); - UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); - - /* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */ - XPROGTarget_SendIdle(); - XPROGTarget_SendIdle(); -} - -/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */ -void XPROGTarget_EnableTargetTPI(void) -{ - IsSending = false; - - /* Set /RESET line low for at least 400ns to enable TPI functionality */ - AUX_LINE_DDR |= AUX_LINE_MASK; - AUX_LINE_PORT &= ~AUX_LINE_MASK; - _delay_us(100); - - /* Set Tx and XCK as outputs, Rx as input */ - DDRD |= (1 << 5) | (1 << 3); - DDRD &= ~(1 << 2); - - /* Set up the synchronous USART for TPI communications - 8 data bits, even parity, 2 stop bits */ - UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1); - UCSR1B = (1 << TXEN1); - UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); - - /* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */ - XPROGTarget_SendIdle(); - XPROGTarget_SendIdle(); -} - -/** Disables the target's PDI interface, exits programming mode and starts the target's application. */ -void XPROGTarget_DisableTargetPDI(void) -{ - /* Switch to Rx mode to ensure that all pending transmissions are complete */ - if (IsSending) - XPROGTarget_SetRxMode(); - - /* Turn off receiver and transmitter of the USART, clear settings */ - UCSR1A = ((1 << TXC1) | (1 << RXC1)); - UCSR1B = 0; - UCSR1C = 0; - - /* Tristate all pins */ - DDRD &= ~((1 << 5) | (1 << 3)); - PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2)); -} - -/** Disables the target's TPI interface, exits programming mode and starts the target's application. */ -void XPROGTarget_DisableTargetTPI(void) -{ - /* Switch to Rx mode to ensure that all pending transmissions are complete */ - if (IsSending) - XPROGTarget_SetRxMode(); - - /* Turn off receiver and transmitter of the USART, clear settings */ - UCSR1A |= (1 << TXC1) | (1 << RXC1); - UCSR1B = 0; - UCSR1C = 0; - - /* Set all USART lines as inputs, tristate */ - DDRD &= ~((1 << 5) | (1 << 3)); - PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2)); - - /* Tristate target /RESET line */ - AUX_LINE_DDR &= ~AUX_LINE_MASK; - AUX_LINE_PORT &= ~AUX_LINE_MASK; -} - -/** Sends a byte via the USART. - * - * \param[in] Byte Byte to send through the USART - */ -void XPROGTarget_SendByte(const uint8_t Byte) -{ - /* Switch to Tx mode if currently in Rx mode */ - if (!(IsSending)) - XPROGTarget_SetTxMode(); - - /* Wait until there is space in the hardware Tx buffer before writing */ - while (!(UCSR1A & (1 << UDRE1))); - UCSR1A |= (1 << TXC1); - UDR1 = Byte; -} - -/** Receives a byte via the hardware USART, blocking until data is received or timeout expired. - * - * \return Received byte from the USART - */ -uint8_t XPROGTarget_ReceiveByte(void) -{ - /* Switch to Rx mode if currently in Tx mode */ - if (IsSending) - XPROGTarget_SetRxMode(); - - /* Wait until a byte has been received before reading */ - while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining); - - return UDR1; -} - -/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */ -void XPROGTarget_SendIdle(void) -{ - /* Switch to Tx mode if currently in Rx mode */ - if (!(IsSending)) - XPROGTarget_SetTxMode(); - - /* Need to do nothing for a full frame to send an IDLE */ - for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++) - { - /* Wait for a full cycle of the clock */ - while (PIND & (1 << 5)); - while (!(PIND & (1 << 5))); - while (PIND & (1 << 5)); - } -} - -static void XPROGTarget_SetTxMode(void) -{ - /* Wait for a full cycle of the clock */ - while (PIND & (1 << 5)); - while (!(PIND & (1 << 5))); - while (PIND & (1 << 5)); - - PORTD |= (1 << 3); - DDRD |= (1 << 3); - - UCSR1B &= ~(1 << RXEN1); - UCSR1B |= (1 << TXEN1); - - IsSending = true; -} - -static void XPROGTarget_SetRxMode(void) -{ - while (!(UCSR1A & (1 << TXC1))); - UCSR1A |= (1 << TXC1); - - UCSR1B &= ~(1 << TXEN1); - UCSR1B |= (1 << RXEN1); - - DDRD &= ~(1 << 3); - PORTD &= ~(1 << 3); - - IsSending = false; -} - -#endif - diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h deleted file mode 100644 index 1341384f2f..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for XPROGTarget.c. - */ - -#ifndef _XPROG_TARGET_ -#define _XPROG_TARGET_ - - /* Includes: */ - #include <avr/io.h> - #include <avr/interrupt.h> - #include <stdbool.h> - - #include <LUFA/Common/Common.h> - - #include "../V2Protocol.h" - #include "XPROGProtocol.h" - #include "Config/AppConfig.h" - - /* Preprocessor Checks: */ - #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) - #undef ENABLE_ISP_PROTOCOL - - #if !defined(ENABLE_XPROG_PROTOCOL) - #define ENABLE_XPROG_PROTOCOL - #endif - #endif - - /** Serial carrier TPI/PDI speed in Hz, when hardware TPI/PDI mode is used. */ - #define XPROG_HARDWARE_SPEED 2000000 - - /** Total number of bits in a single USART frame. */ - #define BITS_IN_USART_FRAME 12 - - /** \name PDI Related Constants - * @{ - */ - #define PDI_CMD_LDS(AddressSize, DataSize) (0x00 | ( AddressSize << 2) | DataSize) - #define PDI_CMD_LD(PointerAccess, DataSize) (0x20 | (PointerAccess << 2) | DataSize) - #define PDI_CMD_STS(AddressSize, DataSize) (0x40 | ( AddressSize << 2) | DataSize) - #define PDI_CMD_ST(PointerAccess, DataSize) (0x60 | (PointerAccess << 2) | DataSize) - #define PDI_CMD_LDCS(PDIReg) (0x80 | PDIReg) - #define PDI_CMD_REPEAT(DataSize) (0xA0 | DataSize) - #define PDI_CMD_STCS(PDIReg) (0xC0 | PDIReg) - #define PDI_CMD_KEY 0xE0 - - #define PDI_REG_STATUS 0 - #define PDI_REG_RESET 1 - #define PDI_REG_CTRL 2 - - #define PDI_STATUS_NVM (1 << 1) - - #define PDI_RESET_KEY 0x59 - #define PDI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF} - - #define PDI_DATASIZE_1BYTE 0 - #define PDI_DATASIZE_2BYTES 1 - #define PDI_DATASIZE_3BYTES 2 - #define PDI_DATASIZE_4BYTES 3 - - #define PDI_POINTER_INDIRECT 0 - #define PDI_POINTER_INDIRECT_PI 1 - #define PDI_POINTER_DIRECT 2 - /** @} */ - - /** \name TPI Related Constants - * @{ - */ - #define TPI_CMD_SLD(PointerAccess) (0x20 | PointerAccess) - #define TPI_CMD_SST(PointerAccess) (0x60 | PointerAccess) - #define TPI_CMD_SSTPR 0x68 - #define TPI_CMD_SIN(Address) (0x10 | ((Address & 0x30) << 1) | (Address & 0x0F)) - #define TPI_CMD_SOUT(Address) (0x90 | ((Address & 0x30) << 1) | (Address & 0x0F)) - #define TPI_CMD_SLDCS(TPIReg) (0x80 | TPIReg) - #define TPI_CMD_SSTCS(TPIReg) (0xC0 | TPIReg) - #define TPI_CMD_SKEY 0xE0 - - #define TPI_REG_STATUS 0x00 - #define TPI_REG_CTRL 0x02 - #define TPI_REG_ID 0x0F - - #define TPI_STATUS_NVM (1 << 1) - - #define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF} - - #define TPI_POINTER_INDIRECT 0 - #define TPI_POINTER_INDIRECT_PI 4 - /** @} */ - - /* Function Prototypes: */ - void XPROGTarget_EnableTargetPDI(void); - void XPROGTarget_EnableTargetTPI(void); - void XPROGTarget_DisableTargetPDI(void); - void XPROGTarget_DisableTargetTPI(void); - void XPROGTarget_SendByte(const uint8_t Byte); - uint8_t XPROGTarget_ReceiveByte(void); - void XPROGTarget_SendIdle(void); - bool XPROGTarget_WaitWhileNVMBusBusy(void); - - #if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL)) - static void XPROGTarget_SetTxMode(void); - static void XPROGTarget_SetRxMode(void); - #endif - -#endif - |