diff options
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/XPROG')
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c | 274 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h | 86 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c | 468 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h | 140 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c | 480 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h | 136 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c | 209 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h | 136 |
8 files changed, 1929 insertions, 0 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c new file mode 100644 index 0000000000..22eb7d74cb --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c @@ -0,0 +1,274 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Target-related functions for the TINY target's NVM module. + */ + +#define INCLUDE_FROM_TINYNVM_C +#include "TINYNVM.h" + +#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) + +/** Sends the given pointer address to the target's TPI pointer register */ +static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress) +{ + /* Send the given 16-bit address to the target, LSB first */ + XPROGTarget_SendByte(TPI_CMD_SSTPR | 0); + XPROGTarget_SendByte(AbsoluteAddress & 0xFF); + XPROGTarget_SendByte(TPI_CMD_SSTPR | 1); + XPROGTarget_SendByte(AbsoluteAddress >> 8); +} + +/** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written. + * + * \param[in] Address 6-bit I/O address to write to in the target's I/O memory space + */ +static void TINYNVM_SendReadNVMRegister(const uint8_t Address) +{ + /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper + * two bits of the 6-bit address are shifted left once - use function to reduce code size */ + XPROGTarget_SendByte(TPI_CMD_SIN(Address)); +} + +/** Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read. + * + * \param[in] Address 6-bit I/O address to read from in the target's I/O memory space + */ +static void TINYNVM_SendWriteNVMRegister(const uint8_t Address) +{ + /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper + * two bits of the 6-bit address are shifted left once - use function to reduce code size */ + XPROGTarget_SendByte(TPI_CMD_SOUT(Address)); +} + +/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read. + * + * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise + */ +bool TINYNVM_WaitWhileNVMBusBusy(void) +{ + /* Poll the STATUS register to check to see if NVM access has been enabled */ + for (;;) + { + /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */ + XPROGTarget_SendByte(TPI_CMD_SLDCS(TPI_REG_STATUS)); + + uint8_t StatusRegister = XPROGTarget_ReceiveByte(); + + /* We might have timed out waiting for the status register read response, check here */ + if (!(TimeoutTicksRemaining)) + return false; + + /* Check the status register read response to see if the NVM bus is enabled */ + if (StatusRegister & TPI_STATUS_NVM) + return true; + } +} + +/** Waits while the target's NVM controller is busy performing an operation, exiting if the + * timeout period expires. + * + * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise + */ +bool TINYNVM_WaitWhileNVMControllerBusy(void) +{ + /* Poll the STATUS register to check to see if NVM access has been enabled */ + for (;;) + { + /* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */ + TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr); + + uint8_t StatusRegister = XPROGTarget_ReceiveByte(); + + /* We might have timed out waiting for the status register read response, check here */ + if (!(TimeoutTicksRemaining)) + return false; + + /* Check to see if the BUSY flag is still set */ + if (!(StatusRegister & (1 << 7))) + return true; + } +} + +/** Enables the physical TPI interface on the target and enables access to the internal NVM controller. + * + * \return Boolean \c true if the TPI interface was enabled successfully, \c false otherwise + */ +bool TINYNVM_EnableTPI(void) +{ + /* Enable TPI programming mode with the attached target */ + XPROGTarget_EnableTargetTPI(); + + /* Lower direction change guard time to 32 USART bits */ + XPROGTarget_SendByte(TPI_CMD_SSTCS(TPI_REG_CTRL)); + XPROGTarget_SendByte(0x02); + + /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */ + XPROGTarget_SendByte(TPI_CMD_SKEY); + for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--) + XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]); + + /* Wait until the NVM bus becomes active */ + return TINYNVM_WaitWhileNVMBusBusy(); +} + +/** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */ +void TINYNVM_DisableTPI(void) +{ + TINYNVM_WaitWhileNVMBusBusy(); + + do + { + /* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */ + XPROGTarget_SendByte(TPI_CMD_SSTCS(TPI_REG_STATUS)); + XPROGTarget_SendByte(0x00); + + /* Read back the STATUS register, check to see if it took effect */ + XPROGTarget_SendByte(TPI_CMD_SLDCS(TPI_REG_STATUS)); + } while (XPROGTarget_ReceiveByte() != 0x00); + + XPROGTarget_DisableTargetTPI(); +} + +/** Reads memory from the target's memory spaces. + * + * \param[in] ReadAddress Start address to read from within the target's address space + * \param[out] ReadBuffer Buffer to store read data into + * \param[in] ReadSize Length of the data to read from the device + * + * \return Boolean \c true if the command sequence complete successfully + */ +bool TINYNVM_ReadMemory(const uint16_t ReadAddress, + uint8_t* ReadBuffer, + uint16_t ReadSize) +{ + /* Wait until the NVM controller is no longer busy */ + if (!(TINYNVM_WaitWhileNVMControllerBusy())) + return false; + + /* Set the NVM control register to the NO OP command for memory reading */ + TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr); + XPROGTarget_SendByte(TINY_NVM_CMD_NOOP); + + /* Send the address of the location to read from */ + TINYNVM_SendPointerAddress(ReadAddress); + + while (ReadSize-- && TimeoutTicksRemaining) + { + /* Read the byte of data from the target */ + XPROGTarget_SendByte(TPI_CMD_SLD(TPI_POINTER_INDIRECT_PI)); + *(ReadBuffer++) = XPROGTarget_ReceiveByte(); + } + + return (TimeoutTicksRemaining > 0); +} + +/** Writes word addressed memory to the target's memory spaces. + * + * \param[in] WriteAddress Start address to write to within the target's address space + * \param[in] WriteBuffer Buffer to source data from + * \param[in] WriteLength Total number of bytes to write to the device (must be an integer multiple of 2) + * + * \return Boolean \c true if the command sequence complete successfully + */ +bool TINYNVM_WriteMemory(const uint16_t WriteAddress, + uint8_t* WriteBuffer, + uint16_t WriteLength) +{ + /* Wait until the NVM controller is no longer busy */ + if (!(TINYNVM_WaitWhileNVMControllerBusy())) + return false; + + /* Must have an integer number of words to write - if extra byte, word-align via a dummy high byte */ + if (WriteLength & 0x01) + WriteBuffer[WriteLength++] = 0xFF; + + /* Set the NVM control register to the WORD WRITE command for memory writing */ + TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr); + XPROGTarget_SendByte(TINY_NVM_CMD_WORDWRITE); + + /* Send the address of the location to write to */ + TINYNVM_SendPointerAddress(WriteAddress); + + while (WriteLength) + { + /* Wait until the NVM controller is no longer busy */ + if (!(TINYNVM_WaitWhileNVMControllerBusy())) + return false; + + /* Write the low byte of data to the target */ + XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT_PI)); + XPROGTarget_SendByte(*(WriteBuffer++)); + + /* Write the high byte of data to the target */ + XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT_PI)); + XPROGTarget_SendByte(*(WriteBuffer++)); + + /* Need to decrement the write length twice, since we wrote a whole two-byte word */ + WriteLength -= 2; + } + + return true; +} + +/** Erases the target's memory space. + * + * \param[in] EraseCommand NVM erase command to send to the device + * \param[in] Address Address inside the memory space to erase + * + * \return Boolean \c true if the command sequence complete successfully + */ +bool TINYNVM_EraseMemory(const uint8_t EraseCommand, + const uint16_t Address) +{ + /* Wait until the NVM controller is no longer busy */ + if (!(TINYNVM_WaitWhileNVMControllerBusy())) + return false; + + /* Set the NVM control register to the target memory erase command */ + TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr); + XPROGTarget_SendByte(EraseCommand); + + /* Write to a high byte location within the target address space to start the erase process */ + TINYNVM_SendPointerAddress(Address | 0x0001); + XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT)); + XPROGTarget_SendByte(0x00); + + /* Wait until the NVM controller is no longer busy */ + if (!(TINYNVM_WaitWhileNVMControllerBusy())) + return false; + + return true; +} + +#endif + diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h new file mode 100644 index 0000000000..61389bb455 --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h @@ -0,0 +1,86 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for TINYNVM.c. + */ + +#ifndef _TINY_NVM_ +#define _TINY_NVM_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/interrupt.h> + #include <stdbool.h> + + #include <LUFA/Common/Common.h> + + #include "XPROGProtocol.h" + #include "XPROGTarget.h" + #include "Config/AppConfig.h" + + /* Preprocessor Checks: */ + #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) + #undef ENABLE_ISP_PROTOCOL + + #if !defined(ENABLE_XPROG_PROTOCOL) + #define ENABLE_XPROG_PROTOCOL + #endif + #endif + + /* Defines: */ + #define TINY_NVM_CMD_NOOP 0x00 + #define TINY_NVM_CMD_CHIPERASE 0x10 + #define TINY_NVM_CMD_SECTIONERASE 0x14 + #define TINY_NVM_CMD_WORDWRITE 0x1D + + /* Function Prototypes: */ + bool TINYNVM_WaitWhileNVMBusBusy(void); + bool TINYNVM_WaitWhileNVMControllerBusy(void); + bool TINYNVM_EnableTPI(void); + void TINYNVM_DisableTPI(void); + bool TINYNVM_ReadMemory(const uint16_t ReadAddress, + uint8_t* ReadBuffer, + uint16_t ReadLength); + bool TINYNVM_WriteMemory(const uint16_t WriteAddress, + uint8_t* WriteBuffer, + uint16_t WriteLength); + bool TINYNVM_EraseMemory(const uint8_t EraseCommand, + const uint16_t Address); + + #if (defined(INCLUDE_FROM_TINYNVM_C) && defined(ENABLE_XPROG_PROTOCOL)) + static void TINYNVM_SendReadNVMRegister(const uint8_t Address); + static void TINYNVM_SendWriteNVMRegister(const uint8_t Address); + static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress); + #endif + +#endif + diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c new file mode 100644 index 0000000000..0208a634b7 --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c @@ -0,0 +1,468 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Target-related functions for the XMEGA target's NVM module. + */ + +#define INCLUDE_FROM_XMEGA_NVM_C +#include "XMEGANVM.h" + +#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) + +/** Sends the given 32-bit absolute address to the target. + * + * \param[in] AbsoluteAddress Absolute address to send to the target + */ +static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress) +{ + /* Send the given 32-bit address to the target, LSB first */ + XPROGTarget_SendByte(AbsoluteAddress & 0xFF); + XPROGTarget_SendByte(AbsoluteAddress >> 8); + XPROGTarget_SendByte(AbsoluteAddress >> 16); + XPROGTarget_SendByte(AbsoluteAddress >> 24); +} + +/** Sends the given NVM register address to the target. + * + * \param[in] Register NVM register whose absolute address is to be sent + */ +static void XMEGANVM_SendNVMRegAddress(const uint8_t Register) +{ + /* Determine the absolute register address from the NVM base memory address and the NVM register address */ + uint32_t Address = XPROG_Param_NVMBase | Register; + + /* Send the calculated 32-bit address to the target, LSB first */ + XMEGANVM_SendAddress(Address); +} + +/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC + * calculation. + * + * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise + */ +bool XMEGANVM_WaitWhileNVMBusBusy(void) +{ + /* Poll the STATUS register to check to see if NVM access has been enabled */ + for (;;) + { + /* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */ + XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_STATUS)); + + uint8_t StatusRegister = XPROGTarget_ReceiveByte(); + + /* We might have timed out waiting for the status register read response, check here */ + if (!(TimeoutTicksRemaining)) + return false; + + /* Check the status register read response to see if the NVM bus is enabled */ + if (StatusRegister & PDI_STATUS_NVM) + return true; + } +} + +/** Waits while the target's NVM controller is busy performing an operation, exiting if the + * timeout period expires. + * + * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise + */ +bool XMEGANVM_WaitWhileNVMControllerBusy(void) +{ + /* Preload the pointer register with the NVM STATUS register address to check the BUSY flag */ + XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS); + + /* Poll the NVM STATUS register while the NVM controller is busy */ + for (;;) + { + /* Fetch the current status value via the pointer register (without auto-increment afterwards) */ + XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT, PDI_DATASIZE_1BYTE)); + + uint8_t StatusRegister = XPROGTarget_ReceiveByte(); + + /* We might have timed out waiting for the status register read response, check here */ + if (!(TimeoutTicksRemaining)) + return false; + + /* Check to see if the BUSY flag is still set */ + if (!(StatusRegister & (1 << 7))) + return true; + } +} + +/** Enables the physical PDI interface on the target and enables access to the internal NVM controller. + * + * \return Boolean \c true if the PDI interface was enabled successfully, \c false otherwise + */ +bool XMEGANVM_EnablePDI(void) +{ + /* Enable PDI programming mode with the attached target */ + XPROGTarget_EnableTargetPDI(); + + /* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */ + XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET)); + XPROGTarget_SendByte(PDI_RESET_KEY); + + /* Lower direction change guard time to 32 USART bits */ + XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_CTRL)); + XPROGTarget_SendByte(0x02); + + /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */ + XPROGTarget_SendByte(PDI_CMD_KEY); + for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--) + XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]); + + /* Wait until the NVM bus becomes active */ + return XMEGANVM_WaitWhileNVMBusBusy(); +} + +/** Removes access to the target's NVM controller and physically disables the target's physical PDI interface. */ +void XMEGANVM_DisablePDI(void) +{ + XMEGANVM_WaitWhileNVMBusBusy(); + + /* Clear the RESET key in the RESET PDI register to allow the XMEGA to run - must perform this until the + * change takes effect, as in some cases it takes multiple writes (silicon bug?). + */ + do + { + /* Clear reset register */ + XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET)); + XPROGTarget_SendByte(0x00); + + /* Read back the reset register, check to see if it took effect */ + XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_RESET)); + } while (XPROGTarget_ReceiveByte() != 0x00); + + XPROGTarget_DisableTargetPDI(); +} + +/** Retrieves the CRC value of the given memory space. + * + * \param[in] CRCCommand NVM CRC command to issue to the target + * \param[out] CRCDest CRC Destination when read from the target + * + * \return Boolean \c true if the command sequence complete successfully + */ +bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, + uint32_t* const CRCDest) +{ + *CRCDest = 0; + + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* Set the NVM command to the correct CRC read command */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(CRCCommand); + + /* Set CMDEX bit in NVM CTRLA register to start the CRC generation */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); + XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); + + /* Wait until the NVM bus is ready again */ + if (!(XMEGANVM_WaitWhileNVMBusBusy())) + return false; + + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* Load the PDI pointer register with the DAT0 register start address */ + XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0); + + /* Send the REPEAT command to grab the CRC bytes */ + XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE)); + XPROGTarget_SendByte(XMEGA_CRC_LENGTH_BYTES - 1); + + /* Read in the CRC bytes from the target */ + XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE)); + for (uint8_t i = 0; i < XMEGA_CRC_LENGTH_BYTES; i++) + ((uint8_t*)CRCDest)[i] = XPROGTarget_ReceiveByte(); + + return (TimeoutTicksRemaining > 0); +} + +/** Reads memory from the target's memory spaces. + * + * \param[in] ReadAddress Start address to read from within the target's address space + * \param[out] ReadBuffer Buffer to store read data into + * \param[in] ReadSize Number of bytes to read + * + * \return Boolean \c true if the command sequence complete successfully + */ +bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, + uint8_t* ReadBuffer, + uint16_t ReadSize) +{ + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* Send the READNVM command to the NVM controller for reading of an arbitrary location */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(XMEGA_NVM_CMD_READNVM); + + if (ReadSize > 1) + { + /* Load the PDI pointer register with the start address we want to read from */ + XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); + XMEGANVM_SendAddress(ReadAddress); + + /* Send the REPEAT command with the specified number of bytes to read */ + XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE)); + XPROGTarget_SendByte(ReadSize - 1); + + /* Send a LD command with indirect access and post-increment to read out the bytes */ + XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE)); + while (ReadSize-- && TimeoutTicksRemaining) + *(ReadBuffer++) = XPROGTarget_ReceiveByte(); + } + else + { + /* Send a LDS command with the read address to read out the requested byte */ + XPROGTarget_SendByte(PDI_CMD_LDS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendAddress(ReadAddress); + *(ReadBuffer++) = XPROGTarget_ReceiveByte(); + } + + return (TimeoutTicksRemaining > 0); +} + +/** Writes byte addressed memory to the target's memory spaces. + * + * \param[in] WriteCommand Command to send to the device to write each memory byte + * \param[in] WriteAddress Address to write to within the target's address space + * \param[in] Byte Byte to write to the target + * + * \return Boolean \c true if the command sequence complete successfully + */ +bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, + const uint32_t WriteAddress, + const uint8_t Byte) +{ + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* Send the memory write command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(WriteCommand); + + /* Send new memory byte to the memory of the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendAddress(WriteAddress); + XPROGTarget_SendByte(Byte); + + return true; +} + +/** Writes page addressed memory to the target's memory spaces. + * + * \param[in] WriteBuffCommand Command to send to the device to write a byte to the memory page buffer + * \param[in] EraseBuffCommand Command to send to the device to erase the memory page buffer + * \param[in] WritePageCommand Command to send to the device to write the page buffer to the destination memory + * \param[in] PageMode Bitfield indicating what operations need to be executed on the specified page + * \param[in] WriteAddress Start address to write the page data to within the target's address space + * \param[in] WriteBuffer Buffer to source data from + * \param[in] WriteSize Number of bytes to write + * + * \return Boolean \c true if the command sequence complete successfully + */ +bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, + const uint8_t EraseBuffCommand, + const uint8_t WritePageCommand, + const uint8_t PageMode, + const uint32_t WriteAddress, + const uint8_t* WriteBuffer, + uint16_t WriteSize) +{ + if (PageMode & XPROG_PAGEMODE_ERASE) + { + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* Send the memory buffer erase command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(EraseBuffCommand); + + /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); + XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); + } + + if (WriteSize) + { + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* Send the memory buffer write command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(WriteBuffCommand); + + /* Load the PDI pointer register with the start address we want to write to */ + XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); + XMEGANVM_SendAddress(WriteAddress); + + /* Send the REPEAT command with the specified number of bytes to write */ + XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE)); + XPROGTarget_SendByte(WriteSize - 1); + + /* Send a ST command with indirect access and post-increment to write the bytes */ + XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE)); + while (WriteSize--) + XPROGTarget_SendByte(*(WriteBuffer++)); + } + + if (PageMode & XPROG_PAGEMODE_WRITE) + { + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* Send the memory write command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(WritePageCommand); + + /* Send the address of the first page location to write the memory page */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendAddress(WriteAddress); + XPROGTarget_SendByte(0x00); + } + + return true; +} + +/** Erases a specific memory space of the target. + * + * \param[in] EraseCommand NVM erase command to send to the device + * \param[in] Address Address inside the memory space to erase + * + * \return Boolean \c true if the command sequence complete successfully + */ +bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, + const uint32_t Address) +{ + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* EEPROM and Chip erasures are triggered differently to FLASH section erasures */ + if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE) + { + /* Send the memory erase command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(EraseCommand); + + /* Set CMDEX bit in NVM CTRLA register to start the erase sequence */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); + XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); + } + else if (EraseCommand == XMEGA_NVM_CMD_ERASEEEPROM) + { + /* Send the EEPROM page buffer erase command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF); + + /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); + XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); + + /* Wait until the NVM controller is no longer busy */ + if (!(XMEGANVM_WaitWhileNVMControllerBusy())) + return false; + + /* Send the EEPROM memory buffer write command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF); + + /* Load the PDI pointer register with the EEPROM page start address */ + XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES)); + XMEGANVM_SendAddress(Address); + + /* Send the REPEAT command with the specified number of bytes to write */ + XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE)); + XPROGTarget_SendByte(XPROG_Param_EEPageSize - 1); + + /* Send a ST command with indirect access and post-increment to tag each byte in the EEPROM page buffer */ + XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE)); + for (uint8_t PageByte = 0; PageByte < XPROG_Param_EEPageSize; PageByte++) + XPROGTarget_SendByte(0x00); + + /* Send the memory erase command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(EraseCommand); + + /* Set CMDEX bit in NVM CTRLA register to start the EEPROM erase sequence */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA); + XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX); + } + else + { + /* Send the memory erase command to the target */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD); + XPROGTarget_SendByte(EraseCommand); + + /* Other erase modes just need us to address a byte within the target memory space */ + XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE)); + XMEGANVM_SendAddress(Address); + XPROGTarget_SendByte(0x00); + } + + /* Wait until the NVM bus is ready again */ + if (!(XMEGANVM_WaitWhileNVMBusBusy())) + return false; + + return true; +} + +#endif + diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h new file mode 100644 index 0000000000..8a8c5b048a --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h @@ -0,0 +1,140 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for XMEGANVM.c. + */ + +#ifndef _XMEGA_NVM_ +#define _XMEGA_NVM_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/interrupt.h> + #include <stdbool.h> + + #include <LUFA/Common/Common.h> + + #include "XPROGProtocol.h" + #include "XPROGTarget.h" + #include "Config/AppConfig.h" + + /* Preprocessor Checks: */ + #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) + #undef ENABLE_ISP_PROTOCOL + + #if !defined(ENABLE_XPROG_PROTOCOL) + #define ENABLE_XPROG_PROTOCOL + #endif + #endif + + /* Defines: */ + #define XMEGA_CRC_LENGTH_BYTES 3 + + #define XMEGA_NVM_REG_ADDR0 0x00 + #define XMEGA_NVM_REG_ADDR1 0x01 + #define XMEGA_NVM_REG_ADDR2 0x02 + #define XMEGA_NVM_REG_DAT0 0x04 + #define XMEGA_NVM_REG_DAT1 0x05 + #define XMEGA_NVM_REG_DAT2 0x06 + #define XMEGA_NVM_REG_CMD 0x0A + #define XMEGA_NVM_REG_CTRLA 0x0B + #define XMEGA_NVM_REG_CTRLB 0x0C + #define XMEGA_NVM_REG_INTCTRL 0x0D + #define XMEGA_NVM_REG_STATUS 0x0F + #define XMEGA_NVM_REG_LOCKBITS 0x10 + + #define XMEGA_NVM_BIT_CTRLA_CMDEX (1 << 0) + + #define XMEGA_NVM_CMD_NOOP 0x00 + #define XMEGA_NVM_CMD_CHIPERASE 0x40 + #define XMEGA_NVM_CMD_READNVM 0x43 + #define XMEGA_NVM_CMD_LOADFLASHPAGEBUFF 0x23 + #define XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF 0x26 + #define XMEGA_NVM_CMD_ERASEFLASHPAGE 0x2B + #define XMEGA_NVM_CMD_WRITEFLASHPAGE 0x2E + #define XMEGA_NVM_CMD_ERASEWRITEFLASH 0x2F + #define XMEGA_NVM_CMD_FLASHCRC 0x78 + #define XMEGA_NVM_CMD_ERASEAPPSEC 0x20 + #define XMEGA_NVM_CMD_ERASEAPPSECPAGE 0x22 + #define XMEGA_NVM_CMD_WRITEAPPSECPAGE 0x24 + #define XMEGA_NVM_CMD_ERASEWRITEAPPSECPAGE 0x25 + #define XMEGA_NVM_CMD_APPCRC 0x38 + #define XMEGA_NVM_CMD_ERASEBOOTSEC 0x68 + #define XMEGA_NVM_CMD_ERASEBOOTSECPAGE 0x2A + #define XMEGA_NVM_CMD_WRITEBOOTSECPAGE 0x2C + #define XMEGA_NVM_CMD_ERASEWRITEBOOTSECPAGE 0x2D + #define XMEGA_NVM_CMD_BOOTCRC 0x39 + #define XMEGA_NVM_CMD_READUSERSIG 0x03 + #define XMEGA_NVM_CMD_ERASEUSERSIG 0x18 + #define XMEGA_NVM_CMD_WRITEUSERSIG 0x1A + #define XMEGA_NVM_CMD_READCALIBRATION 0x02 + #define XMEGA_NVM_CMD_READFUSE 0x07 + #define XMEGA_NVM_CMD_WRITEFUSE 0x4C + #define XMEGA_NVM_CMD_WRITELOCK 0x08 + #define XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF 0x33 + #define XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF 0x36 + #define XMEGA_NVM_CMD_ERASEEEPROM 0x30 + #define XMEGA_NVM_CMD_ERASEEEPROMPAGE 0x32 + #define XMEGA_NVM_CMD_WRITEEEPROMPAGE 0x34 + #define XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE 0x35 + #define XMEGA_NVM_CMD_READEEPROM 0x06 + + /* Function Prototypes: */ + bool XMEGANVM_WaitWhileNVMBusBusy(void); + bool XMEGANVM_WaitWhileNVMControllerBusy(void); + bool XMEGANVM_EnablePDI(void); + void XMEGANVM_DisablePDI(void); + bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, + uint32_t* const CRCDest); + bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, + uint8_t* ReadBuffer, + uint16_t ReadSize); + bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand, + const uint32_t WriteAddress, + const uint8_t Byte); + bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, + const uint8_t EraseBuffCommand, + const uint8_t WritePageCommand, + const uint8_t PageMode, + const uint32_t WriteAddress, + const uint8_t* WriteBuffer, + uint16_t WriteSize); + bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, + const uint32_t Address); + + #if defined(INCLUDE_FROM_XMEGANVM_C) + static void XMEGANVM_SendNVMRegAddress(const uint8_t Register); + static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress); + #endif + +#endif + diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c new file mode 100644 index 0000000000..aa5503f3ff --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c @@ -0,0 +1,480 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices. + */ + +#define INCLUDE_FROM_XPROGPROTOCOL_C +#include "XPROGProtocol.h" + +#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) +/** Base absolute address for the target's NVM controller for PDI programming */ +uint32_t XPROG_Param_NVMBase = 0x010001C0; + +/** Size in bytes of the target's EEPROM page */ +uint16_t XPROG_Param_EEPageSize = 32; + +/** Address of the TPI device's NVMCMD register for TPI programming */ +uint8_t XPROG_Param_NVMCMDRegAddr = 0x33; + +/** Address of the TPI device's NVMCSR register for TPI programming */ +uint8_t XPROG_Param_NVMCSRRegAddr = 0x32; + +/** Currently selected XPROG programming protocol */ +uint8_t XPROG_SelectedProtocol = XPROG_PROTOCOL_PDI; + +/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI + * programming. + */ +void XPROGProtocol_SetMode(void) +{ + struct + { + uint8_t Protocol; + } SetMode_XPROG_Params; + + Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL); + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol; + + Endpoint_Write_8(CMD_XPROG_SETMODE); + Endpoint_Write_8((SetMode_XPROG_Params.Protocol != XPROG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be + * removed and processed so that the underlying XPROG command can be handled. + */ +void XPROGProtocol_Command(void) +{ + uint8_t XPROGCommand = Endpoint_Read_8(); + + switch (XPROGCommand) + { + case XPROG_CMD_ENTER_PROGMODE: + XPROGProtocol_EnterXPROGMode(); + break; + case XPROG_CMD_LEAVE_PROGMODE: + XPROGProtocol_LeaveXPROGMode(); + break; + case XPROG_CMD_ERASE: + XPROGProtocol_Erase(); + break; + case XPROG_CMD_WRITE_MEM: + XPROGProtocol_WriteMemory(); + break; + case XPROG_CMD_READ_MEM: + XPROGProtocol_ReadMemory(); + break; + case XPROG_CMD_CRC: + XPROGProtocol_ReadCRC(); + break; + case XPROG_CMD_SET_PARAM: + XPROGProtocol_SetParam(); + break; + } +} + +/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */ +static void XPROGProtocol_EnterXPROGMode(void) +{ + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + bool NVMBusEnabled = false; + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + NVMBusEnabled = XMEGANVM_EnablePDI(); + else if (XPROG_SelectedProtocol == XPROG_PROTOCOL_TPI) + NVMBusEnabled = TINYNVM_EnableTPI(); + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_ENTER_PROGMODE); + Endpoint_Write_8(NVMBusEnabled ? XPROG_ERR_OK : XPROG_ERR_FAILED); + Endpoint_ClearIN(); +} + +/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with + * the attached device. + */ +static void XPROGProtocol_LeaveXPROGMode(void) +{ + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + XMEGANVM_DisablePDI(); + else + TINYNVM_DisableTPI(); + + #if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL) + /* If the XCK rescue clock option is enabled, we need to restart it once the + * XPROG mode has been exited, since the XPROG protocol stops it after use. */ + ISPTarget_ConfigureRescueClock(); + #endif + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_LEAVE_PROGMODE); + Endpoint_Write_8(XPROG_ERR_OK); + Endpoint_ClearIN(); +} + +/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */ +static void XPROGProtocol_Erase(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + struct + { + uint8_t MemoryType; + uint32_t Address; + } Erase_XPROG_Params; + + Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params), NULL); + Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address); + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t EraseCommand; + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + { + /* Determine which NVM command to send to the device depending on the memory to erase */ + switch (Erase_XPROG_Params.MemoryType) + { + case XPROG_ERASE_CHIP: + EraseCommand = XMEGA_NVM_CMD_CHIPERASE; + break; + case XPROG_ERASE_APP: + EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC; + break; + case XPROG_ERASE_BOOT: + EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC; + break; + case XPROG_ERASE_EEPROM: + EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM; + break; + case XPROG_ERASE_APP_PAGE: + EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE; + break; + case XPROG_ERASE_BOOT_PAGE: + EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE; + break; + case XPROG_ERASE_EEPROM_PAGE: + EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE; + break; + case XPROG_ERASE_USERSIG: + EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG; + break; + default: + EraseCommand = XMEGA_NVM_CMD_NOOP; + break; + } + + /* Erase the target memory, indicate timeout if occurred */ + if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + else + { + if (Erase_XPROG_Params.MemoryType == XPROG_ERASE_CHIP) + EraseCommand = TINY_NVM_CMD_CHIPERASE; + else + EraseCommand = TINY_NVM_CMD_SECTIONERASE; + + /* Erase the target memory, indicate timeout if occurred */ + if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_ERASE); + Endpoint_Write_8(ReturnStatus); + Endpoint_ClearIN(); +} + +/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */ +static void XPROGProtocol_WriteMemory(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + struct + { + uint8_t MemoryType; + uint8_t PageMode; + uint32_t Address; + uint16_t Length; + uint8_t ProgData[256]; + } WriteMemory_XPROG_Params; + + Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) - + sizeof(WriteMemory_XPROG_Params).ProgData), NULL); + WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address); + WriteMemory_XPROG_Params.Length = SwapEndian_16(WriteMemory_XPROG_Params.Length); + Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NULL); + + // The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need + // to catch this and discard it before continuing on with packet processing to prevent communication issues + if (((sizeof(uint8_t) + sizeof(WriteMemory_XPROG_Params) - sizeof(WriteMemory_XPROG_Params.ProgData)) + + WriteMemory_XPROG_Params.Length) % AVRISP_DATA_EPSIZE == 0) + { + Endpoint_ClearOUT(); + Endpoint_WaitUntilReady(); + } + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + { + /* Assume FLASH page programming by default, as it is the common case */ + uint8_t WriteCommand = XMEGA_NVM_CMD_WRITEFLASHPAGE; + uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF; + uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF; + bool PagedMemory = true; + + switch (WriteMemory_XPROG_Params.MemoryType) + { + case XPROG_MEM_TYPE_APPL: + WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE; + break; + case XPROG_MEM_TYPE_BOOT: + WriteCommand = XMEGA_NVM_CMD_WRITEBOOTSECPAGE; + break; + case XPROG_MEM_TYPE_EEPROM: + WriteCommand = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE; + WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF; + EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF; + break; + case XPROG_MEM_TYPE_USERSIG: + WriteCommand = XMEGA_NVM_CMD_WRITEUSERSIG; + break; + case XPROG_MEM_TYPE_FUSE: + WriteCommand = XMEGA_NVM_CMD_WRITEFUSE; + PagedMemory = false; + break; + case XPROG_MEM_TYPE_LOCKBITS: + WriteCommand = XMEGA_NVM_CMD_WRITELOCK; + PagedMemory = false; + break; + } + + /* Send the appropriate memory write commands to the device, indicate timeout if occurred */ + if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand, + WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address, + WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) || + (!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address, + WriteMemory_XPROG_Params.ProgData[0])))) + { + ReturnStatus = XPROG_ERR_TIMEOUT; + } + } + else + { + /* Send write command to the TPI device, indicate timeout if occurred */ + if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData, + WriteMemory_XPROG_Params.Length))) + { + ReturnStatus = XPROG_ERR_TIMEOUT; + } + } + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_WRITE_MEM); + Endpoint_Write_8(ReturnStatus); + Endpoint_ClearIN(); +} + +/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the + * attached device. + */ +static void XPROGProtocol_ReadMemory(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + struct + { + uint8_t MemoryType; + uint32_t Address; + uint16_t Length; + } ReadMemory_XPROG_Params; + + Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NULL); + ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address); + ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length); + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ReadBuffer[256]; + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + { + /* Read the PDI target's memory, indicate timeout if occurred */ + if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + else + { + /* Read the TPI target's memory, indicate timeout if occurred */ + if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_READ_MEM); + Endpoint_Write_8(ReturnStatus); + + if (ReturnStatus == XPROG_ERR_OK) + Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NULL); + + Endpoint_ClearIN(); +} + +/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the + * attached device's memory and a data set on the host. + */ +static void XPROGProtocol_ReadCRC(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + struct + { + uint8_t CRCType; + } ReadCRC_XPROG_Params; + + Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL); + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint32_t MemoryCRC; + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + { + uint8_t CRCCommand; + + /* Determine which NVM command to send to the device depending on the memory to CRC */ + switch (ReadCRC_XPROG_Params.CRCType) + { + case XPROG_CRC_APP: + CRCCommand = XMEGA_NVM_CMD_APPCRC; + break; + case XPROG_CRC_BOOT: + CRCCommand = XMEGA_NVM_CMD_BOOTCRC; + break; + default: + CRCCommand = XMEGA_NVM_CMD_FLASHCRC; + break; + } + + /* Perform and retrieve the memory CRC, indicate timeout if occurred */ + if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + else + { + /* TPI does not support memory CRC */ + ReturnStatus = XPROG_ERR_FAILED; + } + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_CRC); + Endpoint_Write_8(ReturnStatus); + + if (ReturnStatus == XPROG_ERR_OK) + { + Endpoint_Write_8(MemoryCRC >> 16); + Endpoint_Write_16_LE(MemoryCRC & 0xFFFF); + } + + Endpoint_ClearIN(); +} + +/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the + * attached device. + */ +static void XPROGProtocol_SetParam(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + uint8_t XPROGParam = Endpoint_Read_8(); + + /* Determine which parameter is being set, store the new parameter value */ + switch (XPROGParam) + { + case XPROG_PARAM_NVMBASE: + XPROG_Param_NVMBase = Endpoint_Read_32_BE(); + break; + case XPROG_PARAM_EEPPAGESIZE: + XPROG_Param_EEPageSize = Endpoint_Read_16_BE(); + break; + case XPROG_PARAM_NVMCMD_REG: + XPROG_Param_NVMCMDRegAddr = Endpoint_Read_8(); + break; + case XPROG_PARAM_NVMCSR_REG: + XPROG_Param_NVMCSRRegAddr = Endpoint_Read_8(); + break; + case XPROG_PARAM_UNKNOWN_1: + /* TODO: Undocumented parameter added in AVRStudio 5.1, purpose unknown. Must ACK and discard or + the communication with AVRStudio 5.1 will fail. + */ + Endpoint_Discard_16(); + break; + default: + ReturnStatus = XPROG_ERR_FAILED; + break; + } + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_SET_PARAM); + Endpoint_Write_8(ReturnStatus); + Endpoint_ClearIN(); +} + +#endif + diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h new file mode 100644 index 0000000000..e35a1e4a19 --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h @@ -0,0 +1,136 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for XPROGProtocol.c. + */ + +#ifndef _XPROG_PROTOCOL_ +#define _XPROG_PROTOCOL_ + + /* Includes: */ + #include <avr/io.h> + #include <util/delay.h> + #include <stdio.h> + + #include <LUFA/Drivers/USB/USB.h> + + #include "../V2Protocol.h" + #include "XMEGANVM.h" + #include "TINYNVM.h" + #include "Config/AppConfig.h" + + /* Preprocessor Checks: */ + #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) + /* On the XPLAIN board, we only need PDI programming + for the ATXMEGA128A1 - disable ISP to prevent hardware + damage and force-enable XPROG. + */ + #undef ENABLE_ISP_PROTOCOL + + #if !defined(ENABLE_XPROG_PROTOCOL) + #define ENABLE_XPROG_PROTOCOL + #endif + #endif + + /* Macros: */ + #define XPROG_CMD_ENTER_PROGMODE 0x01 + #define XPROG_CMD_LEAVE_PROGMODE 0x02 + #define XPROG_CMD_ERASE 0x03 + #define XPROG_CMD_WRITE_MEM 0x04 + #define XPROG_CMD_READ_MEM 0x05 + #define XPROG_CMD_CRC 0x06 + #define XPROG_CMD_SET_PARAM 0x07 + + #define XPROG_MEM_TYPE_APPL 1 + #define XPROG_MEM_TYPE_BOOT 2 + #define XPROG_MEM_TYPE_EEPROM 3 + #define XPROG_MEM_TYPE_FUSE 4 + #define XPROG_MEM_TYPE_LOCKBITS 5 + #define XPROG_MEM_TYPE_USERSIG 6 + #define XPROG_MEM_TYPE_FACTORY_CALIBRATION 7 + + #define XPROG_ERASE_CHIP 1 + #define XPROG_ERASE_APP 2 + #define XPROG_ERASE_BOOT 3 + #define XPROG_ERASE_EEPROM 4 + #define XPROG_ERASE_APP_PAGE 5 + #define XPROG_ERASE_BOOT_PAGE 6 + #define XPROG_ERASE_EEPROM_PAGE 7 + #define XPROG_ERASE_USERSIG 8 + + #define XPROG_MEM_WRITE_ERASE 0 + #define XPROG_MEM_WRITE_WRITE 1 + + #define XPROG_CRC_APP 1 + #define XPROG_CRC_BOOT 2 + #define XPROG_CRC_FLASH 3 + + #define XPROG_ERR_OK 0 + #define XPROG_ERR_FAILED 1 + #define XPROG_ERR_COLLISION 2 + #define XPROG_ERR_TIMEOUT 3 + + #define XPROG_PARAM_NVMBASE 0x01 + #define XPROG_PARAM_EEPPAGESIZE 0x02 + #define XPROG_PARAM_NVMCMD_REG 0x03 + #define XPROG_PARAM_NVMCSR_REG 0x04 + #define XPROG_PARAM_UNKNOWN_1 0x05 + + #define XPROG_PROTOCOL_PDI 0x00 + #define XPROG_PROTOCOL_JTAG 0x01 + #define XPROG_PROTOCOL_TPI 0x02 + + #define XPROG_PAGEMODE_WRITE (1 << 1) + #define XPROG_PAGEMODE_ERASE (1 << 0) + + /* External Variables: */ + extern uint32_t XPROG_Param_NVMBase; + extern uint16_t XPROG_Param_EEPageSize; + extern uint8_t XPROG_Param_NVMCSRRegAddr; + extern uint8_t XPROG_Param_NVMCMDRegAddr; + + /* Function Prototypes: */ + void XPROGProtocol_SetMode(void); + void XPROGProtocol_Command(void); + + #if (defined(INCLUDE_FROM_XPROGPROTOCOL_C) && defined(ENABLE_XPROG_PROTOCOL)) + static void XPROGProtocol_EnterXPROGMode(void); + static void XPROGProtocol_LeaveXPROGMode(void); + static void XPROGProtocol_SetParam(void); + static void XPROGProtocol_Erase(void); + static void XPROGProtocol_WriteMemory(void); + static void XPROGProtocol_ReadMemory(void); + static void XPROGProtocol_ReadCRC(void); + #endif + +#endif + diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c new file mode 100644 index 0000000000..0455329c3d --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c @@ -0,0 +1,209 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Target-related functions for the PDI Protocol decoder. + */ + +#define INCLUDE_FROM_XPROGTARGET_C +#include "XPROGTarget.h" + +#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) + +/** Flag to indicate if the USART is currently in Tx or Rx mode. */ +bool IsSending; + +/** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */ +void XPROGTarget_EnableTargetPDI(void) +{ + IsSending = false; + + /* Set Tx and XCK as outputs, Rx as input */ + DDRD |= (1 << 5) | (1 << 3); + DDRD &= ~(1 << 2); + + /* Set DATA line high for at least 90ns to disable /RESET functionality */ + PORTD |= (1 << 3); + _delay_us(100); + + /* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */ + UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1); + UCSR1B = (1 << TXEN1); + UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); + + /* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */ + XPROGTarget_SendIdle(); + XPROGTarget_SendIdle(); +} + +/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */ +void XPROGTarget_EnableTargetTPI(void) +{ + IsSending = false; + + /* Set /RESET line low for at least 400ns to enable TPI functionality */ + AUX_LINE_DDR |= AUX_LINE_MASK; + AUX_LINE_PORT &= ~AUX_LINE_MASK; + _delay_us(100); + + /* Set Tx and XCK as outputs, Rx as input */ + DDRD |= (1 << 5) | (1 << 3); + DDRD &= ~(1 << 2); + + /* Set up the synchronous USART for TPI communications - 8 data bits, even parity, 2 stop bits */ + UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1); + UCSR1B = (1 << TXEN1); + UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); + + /* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */ + XPROGTarget_SendIdle(); + XPROGTarget_SendIdle(); +} + +/** Disables the target's PDI interface, exits programming mode and starts the target's application. */ +void XPROGTarget_DisableTargetPDI(void) +{ + /* Switch to Rx mode to ensure that all pending transmissions are complete */ + if (IsSending) + XPROGTarget_SetRxMode(); + + /* Turn off receiver and transmitter of the USART, clear settings */ + UCSR1A = ((1 << TXC1) | (1 << RXC1)); + UCSR1B = 0; + UCSR1C = 0; + + /* Tristate all pins */ + DDRD &= ~((1 << 5) | (1 << 3)); + PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2)); +} + +/** Disables the target's TPI interface, exits programming mode and starts the target's application. */ +void XPROGTarget_DisableTargetTPI(void) +{ + /* Switch to Rx mode to ensure that all pending transmissions are complete */ + if (IsSending) + XPROGTarget_SetRxMode(); + + /* Turn off receiver and transmitter of the USART, clear settings */ + UCSR1A |= (1 << TXC1) | (1 << RXC1); + UCSR1B = 0; + UCSR1C = 0; + + /* Set all USART lines as inputs, tristate */ + DDRD &= ~((1 << 5) | (1 << 3)); + PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2)); + + /* Tristate target /RESET line */ + AUX_LINE_DDR &= ~AUX_LINE_MASK; + AUX_LINE_PORT &= ~AUX_LINE_MASK; +} + +/** Sends a byte via the USART. + * + * \param[in] Byte Byte to send through the USART + */ +void XPROGTarget_SendByte(const uint8_t Byte) +{ + /* Switch to Tx mode if currently in Rx mode */ + if (!(IsSending)) + XPROGTarget_SetTxMode(); + + /* Wait until there is space in the hardware Tx buffer before writing */ + while (!(UCSR1A & (1 << UDRE1))); + UCSR1A |= (1 << TXC1); + UDR1 = Byte; +} + +/** Receives a byte via the hardware USART, blocking until data is received or timeout expired. + * + * \return Received byte from the USART + */ +uint8_t XPROGTarget_ReceiveByte(void) +{ + /* Switch to Rx mode if currently in Tx mode */ + if (IsSending) + XPROGTarget_SetRxMode(); + + /* Wait until a byte has been received before reading */ + while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining); + + return UDR1; +} + +/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */ +void XPROGTarget_SendIdle(void) +{ + /* Switch to Tx mode if currently in Rx mode */ + if (!(IsSending)) + XPROGTarget_SetTxMode(); + + /* Need to do nothing for a full frame to send an IDLE */ + for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++) + { + /* Wait for a full cycle of the clock */ + while (PIND & (1 << 5)); + while (!(PIND & (1 << 5))); + while (PIND & (1 << 5)); + } +} + +static void XPROGTarget_SetTxMode(void) +{ + /* Wait for a full cycle of the clock */ + while (PIND & (1 << 5)); + while (!(PIND & (1 << 5))); + while (PIND & (1 << 5)); + + PORTD |= (1 << 3); + DDRD |= (1 << 3); + + UCSR1B &= ~(1 << RXEN1); + UCSR1B |= (1 << TXEN1); + + IsSending = true; +} + +static void XPROGTarget_SetRxMode(void) +{ + while (!(UCSR1A & (1 << TXC1))); + UCSR1A |= (1 << TXC1); + + UCSR1B &= ~(1 << TXEN1); + UCSR1B |= (1 << RXEN1); + + DDRD &= ~(1 << 3); + PORTD &= ~(1 << 3); + + IsSending = false; +} + +#endif + diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h new file mode 100644 index 0000000000..1341384f2f --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h @@ -0,0 +1,136 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for XPROGTarget.c. + */ + +#ifndef _XPROG_TARGET_ +#define _XPROG_TARGET_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/interrupt.h> + #include <stdbool.h> + + #include <LUFA/Common/Common.h> + + #include "../V2Protocol.h" + #include "XPROGProtocol.h" + #include "Config/AppConfig.h" + + /* Preprocessor Checks: */ + #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) + #undef ENABLE_ISP_PROTOCOL + + #if !defined(ENABLE_XPROG_PROTOCOL) + #define ENABLE_XPROG_PROTOCOL + #endif + #endif + + /** Serial carrier TPI/PDI speed in Hz, when hardware TPI/PDI mode is used. */ + #define XPROG_HARDWARE_SPEED 2000000 + + /** Total number of bits in a single USART frame. */ + #define BITS_IN_USART_FRAME 12 + + /** \name PDI Related Constants + * @{ + */ + #define PDI_CMD_LDS(AddressSize, DataSize) (0x00 | ( AddressSize << 2) | DataSize) + #define PDI_CMD_LD(PointerAccess, DataSize) (0x20 | (PointerAccess << 2) | DataSize) + #define PDI_CMD_STS(AddressSize, DataSize) (0x40 | ( AddressSize << 2) | DataSize) + #define PDI_CMD_ST(PointerAccess, DataSize) (0x60 | (PointerAccess << 2) | DataSize) + #define PDI_CMD_LDCS(PDIReg) (0x80 | PDIReg) + #define PDI_CMD_REPEAT(DataSize) (0xA0 | DataSize) + #define PDI_CMD_STCS(PDIReg) (0xC0 | PDIReg) + #define PDI_CMD_KEY 0xE0 + + #define PDI_REG_STATUS 0 + #define PDI_REG_RESET 1 + #define PDI_REG_CTRL 2 + + #define PDI_STATUS_NVM (1 << 1) + + #define PDI_RESET_KEY 0x59 + #define PDI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF} + + #define PDI_DATASIZE_1BYTE 0 + #define PDI_DATASIZE_2BYTES 1 + #define PDI_DATASIZE_3BYTES 2 + #define PDI_DATASIZE_4BYTES 3 + + #define PDI_POINTER_INDIRECT 0 + #define PDI_POINTER_INDIRECT_PI 1 + #define PDI_POINTER_DIRECT 2 + /** @} */ + + /** \name TPI Related Constants + * @{ + */ + #define TPI_CMD_SLD(PointerAccess) (0x20 | PointerAccess) + #define TPI_CMD_SST(PointerAccess) (0x60 | PointerAccess) + #define TPI_CMD_SSTPR 0x68 + #define TPI_CMD_SIN(Address) (0x10 | ((Address & 0x30) << 1) | (Address & 0x0F)) + #define TPI_CMD_SOUT(Address) (0x90 | ((Address & 0x30) << 1) | (Address & 0x0F)) + #define TPI_CMD_SLDCS(TPIReg) (0x80 | TPIReg) + #define TPI_CMD_SSTCS(TPIReg) (0xC0 | TPIReg) + #define TPI_CMD_SKEY 0xE0 + + #define TPI_REG_STATUS 0x00 + #define TPI_REG_CTRL 0x02 + #define TPI_REG_ID 0x0F + + #define TPI_STATUS_NVM (1 << 1) + + #define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF} + + #define TPI_POINTER_INDIRECT 0 + #define TPI_POINTER_INDIRECT_PI 4 + /** @} */ + + /* Function Prototypes: */ + void XPROGTarget_EnableTargetPDI(void); + void XPROGTarget_EnableTargetTPI(void); + void XPROGTarget_DisableTargetPDI(void); + void XPROGTarget_DisableTargetTPI(void); + void XPROGTarget_SendByte(const uint8_t Byte); + uint8_t XPROGTarget_ReceiveByte(void); + void XPROGTarget_SendIdle(void); + bool XPROGTarget_WaitWhileNVMBusBusy(void); + + #if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL)) + static void XPROGTarget_SetTxMode(void); + static void XPROGTarget_SetRxMode(void); + #endif + +#endif + |