diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/USB/Class/Host/HIDClassHost.h')
| -rw-r--r-- | lib/lufa/LUFA/Drivers/USB/Class/Host/HIDClassHost.h | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/lib/lufa/LUFA/Drivers/USB/Class/Host/HIDClassHost.h b/lib/lufa/LUFA/Drivers/USB/Class/Host/HIDClassHost.h deleted file mode 100644 index 73b5abb1ba..0000000000 --- a/lib/lufa/LUFA/Drivers/USB/Class/Host/HIDClassHost.h +++ /dev/null @@ -1,313 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Host mode driver for the library USB HID Class driver. - * - * Host mode driver for the library USB HID Class driver. - * - * \note This file should not be included directly. It is automatically included as needed by the USB module driver - * dispatch header located in LUFA/Drivers/USB.h. - */ - -/** \ingroup Group_USBClassHID - * \defgroup Group_USBClassHIDHost HID Class Host Mode Driver - * - * \section Sec_USBClassHIDHost_Dependencies Module Source Dependencies - * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/HIDClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i> - * - * \section Sec_USBClassHIDHost_ModDescription Module Description - * Host Mode USB Class driver framework interface, for the HID USB Class driver. - * - * @{ - */ - -#ifndef __HID_CLASS_HOST_H__ -#define __HID_CLASS_HOST_H__ - - /* Includes: */ - #include "../../USB.h" - #include "../Common/HIDClassCommon.h" - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_HID_DRIVER) - #error Do not include this file directly. Include LUFA/Drivers/USB.h instead. - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Error code for some HID Host functions, indicating a logical (and not hardware) error. */ - #define HID_ERROR_LOGICAL 0x80 - - /* Type Defines: */ - /** \brief HID Class Host Mode Configuration and State Structure. - * - * Class state structure. An instance of this structure should be made within the user application, - * and passed to each of the HID class driver functions as the \c HIDInterfaceInfo parameter. This - * stores each HID interface's configuration and state information. - */ - typedef struct - { - struct - { - USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ - USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ - - uint8_t HIDInterfaceProtocol; /**< HID interface protocol value to match against if a specific - * boot subclass protocol is required, a protocol value from the - * \ref HID_Descriptor_ClassSubclassProtocol_t enum. - */ - #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY) - HID_ReportInfo_t* HIDParserData; /**< HID parser data to store the parsed HID report data, when boot protocol - * is not used. - * - * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, - * this field is unavailable. - */ - #endif - } Config; /**< Config data for the USB class interface within the device. All elements in this section - * <b>must</b> be set or the interface will fail to enumerate and operate correctly. - */ - struct - { - bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid - * after \ref HID_Host_ConfigurePipes() is called and the Host state machine is in the - * Configured state. - */ - uint8_t InterfaceNumber; /**< Interface index of the HID interface within the attached device. */ - - bool SupportsBootProtocol; /**< Indicates if the current interface instance supports the HID Boot - * Protocol when enabled via \ref HID_Host_SetBootProtocol(). - */ - bool DeviceUsesOUTPipe; /**< Indicates if the current interface instance uses a separate OUT data pipe for - * OUT reports, or if OUT reports are sent via the control pipe instead. - */ - bool UsingBootProtocol; /**< Indicates that the interface is currently initialized in Boot Protocol mode */ - uint16_t HIDReportSize; /**< Size in bytes of the HID report descriptor in the device. */ - - uint8_t LargestReportSize; /**< Largest report the device will send, in bytes. */ - } State; /**< State data for the USB class interface within the device. All elements in this section - * <b>may</b> be set to initial values, but may also be ignored to default to sane values when - * the interface is enumerated. - */ - } USB_ClassInfo_HID_Host_t; - - /* Enums: */ - /** Enum for the possible error codes returned by the \ref HID_Host_ConfigurePipes() function. */ - enum HID_Host_EnumerationFailure_ErrorCodes_t - { - HID_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */ - HID_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */ - HID_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible HID interface was not found in the device's Configuration Descriptor. */ - HID_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */ - }; - - /* Function Prototypes: */ - /** Host interface configuration routine, to configure a given HID host interface instance using the Configuration - * Descriptor read from an attached USB device. This function automatically updates the given HID Host instance's - * state values and configures the pipes required to communicate with the interface if it is found within the - * device. This should be called once after the stack has enumerated the attached device, while the host state - * machine is in the Addressed state. - * - * \attention Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call - * to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function. - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. - * - * \return A value from the \ref HID_Host_EnumerationFailure_ErrorCodes_t enum. - */ - uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, - uint16_t ConfigDescriptorSize, - void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); - - - /** Receives a HID IN report from the attached HID device, when a report has been received on the HID IN Data pipe. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \attention The destination buffer should be large enough to accommodate the largest report that the attached device - * can generate. - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * \param[in] Buffer Buffer to store the received report into. - * - * \return An error code from the \ref Pipe_Stream_RW_ErrorCodes_t enum. - */ - uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, - void* Buffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); - - #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY) - /** Receives a HID IN report from the attached device, by the report ID. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable. - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch. - * \param[in] Buffer Buffer to store the received report into. - * - * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum. - */ - uint8_t HID_Host_ReceiveReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, - const uint8_t ReportID, - void* Buffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); - #endif - - /** Sends an OUT or FEATURE report to the currently attached HID device, using the device's OUT pipe if available, - * or the device's Control pipe if not. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, the ReportID parameter is removed - * from the parameter list of this function. - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs. - * \param[in] ReportType Type of report to issue to the device, either \ref HID_REPORT_ITEM_Out or \ref HID_REPORT_ITEM_Feature. - * \param[in] Buffer Buffer containing the report to send to the attached device. - * \param[in] ReportSize Report size in bytes to send to the attached device. - * - * \return An error code from the \ref USB_Host_SendControlErrorCodes_t enum if the DeviceUsesOUTPipe flag is set in - * the interface's state structure, a value from the \ref Pipe_Stream_RW_ErrorCodes_t enum otherwise. - */ - uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, - #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY) - const uint8_t ReportID, - #endif - const uint8_t ReportType, - void* Buffer, - const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1) - #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY) - ATTR_NON_NULL_PTR_ARG(4); - #else - ATTR_NON_NULL_PTR_ARG(3); - #endif - - /** Determines if a HID IN report has been received from the attached device on the data IN pipe. - * - * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the - * call will fail. - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * - * \return Boolean \c true if a report has been received, \c false otherwise. - */ - bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - - /** Switches the attached HID device's reporting protocol over to the Boot Report protocol mode, on supported devices. - * - * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method must still be called - * to explicitly place the attached device into boot protocol mode before use. - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * - * \return \ref HID_ERROR_LOGICAL if the device does not support Boot Protocol mode, a value from the - * \ref USB_Host_SendControlErrorCodes_t enum otherwise. - */ - uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - - /** Sets the idle period for the attached HID device to the specified interval. The HID idle period determines the rate - * at which the device should send a report, when no state changes have occurred; i.e. on HID keyboards, this sets the - * hardware key repeat interval. - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * \param[in] MS Idle period as a multiple of four milliseconds, zero to disable hardware repeats - * - * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum. - */ - uint8_t HID_Host_SetIdlePeriod(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, - const uint16_t MS) ATTR_NON_NULL_PTR_ARG(1); - - #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY) - /** Switches the attached HID device's reporting protocol over to the standard Report protocol mode. This also retrieves - * and parses the device's HID report descriptor, so that the size of each report can be determined in advance. - * - * \attention Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID - * Report Parser this function references <b>must</b> be implemented in the user code. - * - * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable. - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * - * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum if an error occurs while retrieving the HID - * Report descriptor or the setting of the Report protocol, \ref HID_ERROR_LOGICAL if the HID interface does - * not have a valid \ref HID_ReportInfo_t structure set in its configuration, a mask of \ref HID_ERROR_LOGICAL - * and a value from the \ref HID_Parse_ErrorCodes_t otherwise. - */ - uint8_t HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - #endif - - /* Inline Functions: */ - /** General management task for a given Human Interface Class host class interface, required for the correct operation of - * the interface. This should be called frequently in the main program loop, before the master USB management task - * \ref USB_USBTask(). - * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - */ - static inline void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - static inline void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) - { - (void)HIDInterfaceInfo; - } - - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Function Prototypes: */ - #if defined(__INCLUDE_FROM_HID_HOST_C) - static uint8_t DCOMP_HID_Host_NextHIDInterface(void* const CurrentDescriptor) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); - static uint8_t DCOMP_HID_Host_NextHIDDescriptor(void* const CurrentDescriptor) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); - static uint8_t DCOMP_HID_Host_NextHIDInterfaceEndpoint(void* const CurrentDescriptor) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); - #endif - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - |