diff options
Diffstat (limited to 'lib/lufa/LUFA/DoxygenPages')
29 files changed, 4945 insertions, 0 deletions
diff --git a/lib/lufa/LUFA/DoxygenPages/BuildSystem.txt b/lib/lufa/LUFA/DoxygenPages/BuildSystem.txt new file mode 100644 index 0000000000..e0d84f0acd --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/BuildSystem.txt @@ -0,0 +1,281 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_BuildSystem The LUFA Build System + * + * \section Sec_BuildSystem_Overview Overview of the LUFA Build System + * The LUFA build system was originally an attempt at making a set of + * re-usable, modular build make files which could be referenced in a LUFA + * powered project, to minimize the amount of code required in an + * application makefile. + * + * As it turned out to be fairly generic in nature, it was split out into its + * own separate project, called DMBS (<i>Dean's Makefile Build System</i>) + * which is released into the public domain. LUFA-specific portions of the + * LUFA build system extend DMBS, and provide a universal build system for all + * LUFA projects. + * + * The latest DMBS project information and documentation can be found at: + * https://github.com/abcminiuser/dmbs + * + * DMBS is written in GNU Make, and each module is independent of one-another. + * + * LUFA now uses DMBS for its build system, with some LUFA specific extension + * modules. + * + * If you have problems building using LUFA, see \subpage Page_BuildTroubleshooting for resolution steps. + * + * \li \subpage Page_BuildModule_LUFA_SOURCES - The LUFA SOURCES extension module for DMBS + * \li \subpage Page_BuildModule_LUFA_GCC - The LUFA GCC extension module for DMBS + */ + +/** \page Page_BuildModule_LUFA_SOURCES LUFA SOURCES extension module for DMBS + * + * The LUFA SOURCES extension more for DMBS provides LUFA specific variables + * listing the various LUFA source files required to be build by a project for + * a given LUFA module. This module gives a way to reference LUFA source files + * symbolically, so that changes to the library structure do not break the + * library makefile. + * + * To use this module in your application makefile, add the following code: + * \code + * include $(LUFA_PATH)/Build/LUFA/lufa-sources.mk + * \endcode + * + * \section SSec_BuildModule_LUFA_SOURCES_Requirements Requirements + * None. + * + * \section SSec_BuildModule_LUFA_SOURCES_Targets Targets + * + * <table> + * <tr> + * <td><i>None</i></td> + * </tr> + * </table> + * + * \section SSec_BuildModule_LUFA_SOURCES_MandatoryParams Mandatory Parameters + * + * <table> + * <tr> + * <td><tt>LUFA_PATH</tt></td> + * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> + * </tr> + * <tr> + * <td><tt>ARCH</tt></td> + * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td> + * </tr> + * </table> + * + * \section SSec_BuildModule_LUFA_SOURCES_OptionalParams Optional Parameters + * + * <table> + * <tr> + * <td><i>None</i></td> + * </tr> + * </table> + * + * \section SSec_BuildModule_LUFA_SOURCES_ProvidedVariables Module Provided Variables + * + * <table> + * <tr> + * <td><tt>LUFA_SRC_USB</tt></td> + * <td>List of LUFA USB driver source files.</td> + * </tr> + * <tr> + * <td><tt>LUFA_SRC_USBCLASS</tt></td> + * <td>List of LUFA USB Class driver source files.</td> + * </tr> + * <tr> + * <td><tt>LUFA_SRC_TEMPERATURE</tt></td> + * <td>List of LUFA temperature sensor driver source files.</td> + * </tr> + * <tr> + * <td><tt>LUFA_SRC_SERIAL</tt></td> + * <td>List of LUFA Serial U(S)ART driver source files.</td> + * </tr> + * <tr> + * <td><tt>LUFA_SRC_TWI</tt></td> + * <td>List of LUFA TWI driver source files.</td> + * </tr> + * <tr> + * <td><tt>LUFA_SRC_PLATFORM</tt></td> + * <td>List of LUFA architecture specific platform management source files.</td> + * </tr> + * </table> + * + * \section SSec_BuildModule_LUFA_SOURCES_ProvidedMacros Module Provided Macros + * + * <table> + * <tr> + * <td><i>None</i></td> + * </tr> + * </table> + */ + +/** \page Page_BuildModule_LUFA_GCC LUFA GCC extension module for DMBS + * + * The LUFA GCC extension module for the standard DMBS GCC module extends the + * latter to support the compilation of LUFA powered projects. It should be + * imported into your LUFA powered project makefiles to ensure that the correct + * build settings are used for the project's configuration. + * + * To use this module in your application makefile, add the following code: + * \code + * include $(LUFA_PATH)/Build/LUFA/lufa-gcc.mk + * \endcode + * + * \section SSec_BuildModule_LUFA_GCC_Requirements Requirements + * This module should be included in your makefile *after* the DMBS GCC module. + * + * \section SSec_BuildModule_LUFA_GCC_Targets Targets + * + * <table> + * <tr> + * <td><i>None</i></td> + * </tr> + * </table> + * + * \section SSec_BuildModule_LUFA_GCC_MandatoryParams Mandatory Parameters + * + * <table> + * <tr> + * <td><tt>LUFA_PATH</tt></td> + * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> + * </tr> + * </table> + * + * \section SSec_BuildModule_LUFA_GCC_OptionalParams Optional Parameters + * + * <table> + * <tr> + * <td><tt>BOARD</tt></td> + * <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td> + * </tr> + * </table> + * + * \section SSec_BuildModule_LUFA_GCC_ProvidedVariables Module Provided Variables + * + * <table> + * <tr> + * <td><i>None</i></td> + * </tr> + * </table> + * + * \section SSec_BuildModule_LUFA_GCC_ProvidedMacros Module Provided Macros + * + * <table> + * <tr> + * <td><i>None</i></td> + * </tr> + * </table> + */ + +/** \page Page_BuildTroubleshooting Troubleshooting Information + * + * LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and + * surrounding binaries. This can sometimes lead to problems compiling + * applications if one of these features is buggy in the version of the tools + * used in a build environment. Missing utilities and incorrectly set makefile + * configuration options can also result in different errors being produced + * when compilation or other operations are attempted. The table below lists a + * set of commonly encountered errors and their resolutions. + * + * <table> + * <tr> + * <th>Problem</th> + * <th>Resolution</th> + * </tr> + * <tr> + * <td>Error "<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>" shown when compiling.</td> + * <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt> + * from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>" shown when compiling.</td> + * <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>" shown when compiling.</td> + * <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with + * GNU make or other variants of Make causing an infinitely recursive build.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>Unsupported architecture "<i>{X}</i>"</tt></b>" shown when compiling.</td> + * <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>Makefile <i>{X}</i> value not set</tt></b>" shown when compiling.</td> + * <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA + * build system modules. Define the value in your project makefile and try again.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>" shown when compiling.</td> + * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration + * option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>" shown when compiling.</td> + * <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No"). + * This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>" shown when compiling.</td> + * <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not + * recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td> + * </tr> + * <tr> + * <td>Error "<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>" shown when compiling.</td> + * <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path. + * This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>Source file does not exist: <i>{X}</i></tt></b>" shown when compiling.</td> + * <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or + * relative path given in the user project makefile is correct and try again.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>" shown when upgrading a Doxygen configuration file.</td> + * <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists + * and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration + * file.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>" shown when compiling.</td> + * <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration + * options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or + * upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>" shown when make is invoked.</td> + * <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or + * absolute path to the LUFA library core.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>" shown when compiling.</td> + * <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be + * found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt> + * parameter.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>" shown when compiling a bootloader.</td> + * <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This + * usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the + * compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>" shown when compiling.</td> + * <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the + * version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td> + * </tr> + * <tr> + * <td>Error "<b><tt>undefined reference to `<i>{X}</i>'</tt></b>" shown when compiling.</td> + * <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA + * library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_LUFA_SOURCES).</td> + * </tr> + * </table> + * + * For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp. + */ diff --git a/lib/lufa/LUFA/DoxygenPages/BuildingLinkableLibraries.txt b/lib/lufa/LUFA/DoxygenPages/BuildingLinkableLibraries.txt new file mode 100644 index 0000000000..cbbae4b8e9 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/BuildingLinkableLibraries.txt @@ -0,0 +1,23 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_BuildLibrary Building as a Linkable Library + * + * The LUFA library can be built as a proper linkable library (with the extension .a) under AVR-GCC, so that + * the library does not need to be recompiled with each revision of a user project. Instructions for creating + * a library from a given source tree can be found in the AVR-GCC user manual included in the WinAVR install + * /Docs/ directory. + * + * However, building the library is <b>not recommended</b>, as the static (compile-time) options will be + * unable to be changed without a recompilation of the LUFA code. Therefore, if the library is to be built + * from the LUFA source, it should be made to be application-specific and compiled with the static options + * that are required for each project (which should be recorded along with the library). + * + * Normal library use has the library components compiled in at the same point as the application code, as + * demonstrated in the library demos and applications. This is the preferred method, as the library is recompiled + * each time to ensure that all static options for a particular application are applied. + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/ChangeLog.txt b/lib/lufa/LUFA/DoxygenPages/ChangeLog.txt new file mode 100644 index 0000000000..aedfd3ce53 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/ChangeLog.txt @@ -0,0 +1,1653 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + + /** \page Page_ChangeLog Project Changelog + * + * \section Sec_ChangeLog170418 Version 170418 + * <b>New:</b> + * - Core: + * - Added support for the Pololu A-Star Micro board (thanks to Joh Schneider) + * - Added new \c LUFA_VERSION_RELEASE_TYPE macro to the library version header, to determine release type (thanks to NicoHood) + * + * <b>Fixed:</b> + * - Core: + * - The CALLBACK_USB_GetDescriptor() callback function into the user application erroneously had a uint8_t type for the wIndex + * parameter, instead of uint16_t (thanks to Matlo) + * - Fixed broken USE_RAM_DESCRIPTORS compile time option when the FIXED_NUM_CONFIGURATIONS compile time option is not enabled + * in a user application (thanks to Matlo) + * - Fixed missing \c va_end() calls in the HID bootloader CLI app which could cause portability issues + * - Fixed void pointer arithmetic in the \c Serial_SendData() functions for AVR8 and XMEGA architectures + * - Fixed void pointer arithmetic in the low level and class driver RNDIS demo protocol decoders + * - Fixed low level RNDIS demo incorrectly setting the RNDIS state when a null packet filter was requested + * - Fixed missing entries in several project's Atmel Studio integration files, such as driver INF files + * - Fixed invalid endpoint indexes causing memory corruption in device Clear/Set Feature standard requests (thanks to Peter Popovec) + * - Fixed incorrect serialization in USB_SetHIDReportItemInfo() function (thanks to e-chip) + * + * <b>Changed:</b> + * - Added signed alternative libUSB driver for the AVRISP-MKII clone project, to support Atmel Studio 7 (thanks to Atmel) + * - Removed no longer required LIBUSB_DRIVER_COMPAT and RESET_TOGGLES_LIBUSB_COMPAT configuration options from the AVRISP-MKII + * clone project, as the new libUSB driver works for AVRDUDE and Atmel Studio 7 under Windows + * - Replaced the LUFA build system with its (compatible) successor, DMBS (Dean's Makefile Build System) + * - Removed obsolete library TAR export and associated documentation + * - Fixed incorrect HID_DESCRIPTOR_KEYBOARD() macro definition (thanks to Eric Tang) + * + * \section Sec_ChangeLog151115 Version 151115 + * <b>New:</b> + * - Added support for the Atmel Xplained-MINI series of development kits + * - Added new PROGMEM variant send functions to the CDC class device driver (thanks to Stefan Hellermann) + * - Added new PROGMEM variant send functions to the CDC class host driver + * - Added additional Arduino Uno board definitions for the main processor reset (thanks to NicoHood) + * - Added modified DocBook transforms to generate Atmel Studio 6/7 internal help documentation (thanks to Morten Engelhardt Olsen) + * + * <b>Changed:</b> + * - Core: + * - The TWI peripheral driver's TWI_WritePacket() and TWI_ReadPacket() functions now takes a 16-bit Length rather than an 8-bit + * length, for longer transfers + * - Library Applications: + * - The CDC, DFU, Mass Storage and Printer class bootloaders will no longer run the user application if the application reset + * vector is blank (thanks to Alex Kazik) + * - The CDC, DFU and Printer class bootloaders are now compatible with the original Atmel XPLAIN and Arduino Leonardo boards + * - The CDC, DFU, Mass Storage and Printer class bootloaders are not compatible with devices with the BOOTRST fuse set and will + * exit automatically unless an external reset was the last reset cause (thanks to Alex Kazik) + * - Added missing force-inline attribute to the endianness utility functions (thanks to Stefan Hellermann) + * - Updated the DFU build system module to use updated EEPROM programming command arguments for dfu-programmer 0.6.2 or newer + * + * <b>Fixed:</b> + * - Fixed broken XMEGA serial stream driver due to missing USART base pointer parameter (thanks to William Patterson) + * - Fixed incorrect signature reported in the CDC/DFU bootloaders for the AT90USB82 (thanks to NicoHood) + * - Fixed broken RNDIS demos on Linux machines whose DHCP hosts require a Lease Time option (thanks to Stefan Hellermann) + * - Fixed broken LEDs_Disable() implementation for the Arduino Uno board (thanks to NicoHood) + * - Fixed missing bounds checks and off-by-one in the DFU bootloader signature bytes (thanks to Reuti) + * + * \section Sec_ChangeLog140928 Version 140928 + * <b>New:</b> + * - Core: + * - Updated the BUILD build system module to add a new COMPILER_PATH optional variable + * - Added Serial_IsSendReady() and Serial_IsSendComplete() functions to the Serial hardware peripheral driver + * - Added support for the Arduino Yun board (ATMEGA32U4 co-processor) + * - Added support for the Arduino Micro board (thanks to Zoltán Szőke) + * - Library Applications: + * - Added new Dual MIDI class driver device demo + * + * <b>Changed:</b> + * - Core: + * - The RNDIS device class driver now takes a user-supplied buffer and buffer length for the internal RNDIS + * message management (thanks to Peter Mc Shane) + * + * <b>Fixed:</b> + * - Core: + * - Fixed device class driver pipe configuration routines returning success with a partially constructed instance + * when a pipe configuration failed (thanks to Helge Suess) + * - Fixed incorrect XMEGA DFLL reference frequency (thanks to Martin Aakerberg) + * - Fixed possible infinite loop in the control endpoint stream write function (thanks to Clayton Knight) + * - Fixed missing HID report ID prefix on HID class driver GetReport request responses (thanks to Bert van Hall) + * - Fixed incorrect XMEGA USB controller clock division factory for non-Full Speed operation (thanks to Bert van Hall) + * - Fixed the LUFA build system to prevent incorrect code from being generated in newer toolchains when building for larger + * FLASH memory devices (thanks to demultiplexer) + * - Fixed missing parenthesis in the MIDI_EVENT() macro which could cause incorrect results (thanks to hexwab) + * - Fixed mixed capitalization of TWI in the XMEGA TWI driver causing compilation failures (thanks to Jacob Schloss) + * - Fixed broken AVR8 USART-SPI peripheral driver (thanks to Phil Zakielarz) + * - Library Applications: + * - Fixed spurious 0xFE USART byte sent in the USBtoSerial project when the baud rate is changed (thanks to Carl Kjeldsen) + * - Fixed blocking USART reads causing low throughput on slow baud rates in the USBtoSerial project (thanks to Nevada Smith) + * - Fixed USART reception overrun corrupting the internal buffers in the USBtoSerial project (thanks to Nevada Smith) + * - Fixed broken LowLevel Audio Out demo sampling frequency configuration (thanks to Torsten Duwe) + * + * \section Sec_ChangeLog140302 Version 140302 + * <b>New:</b> + * - Library Applications: + * - Added new Bulk Vendor low level device demo + * - Added new libUSB host Python and NodeJS application examples for the Class driver GenericHID demo (thanks to Laszlo Monda) + * - Added new AVR8 USB option to keep 3.3V regulator enabled (thanks to Michael Hanselmann) + * - Added new USB_STRING_DESCRIPTOR() and USB_STRING_DESCRIPTOR_ARRAY() convenience macros (thanks to Laszlo Monda) + * + * <b>Changed:</b> + * - Library Applications: + * - Refactored out USB interface IDs in the demo applications into enums (thanks to Laszlo Monda) + * - AVRISP-MKII Clone Project PDI/TPI frequency increased from 250KHz to 2MHz as it is now stable + * - Increased TPI/PDI handshake delay to 100us from 1us to support targets with high amounts of capacitance on their + * /RESET lines (thanks to Paul Duke) + * - Changed the VERSION_BCD() macro to accept the major/minor/revision values as separate parameters + * + * <b>Fixed:</b> + * - Core: + * - Fixed MIDI device class driver MIDI_Device_ReceiveEventPacket() for the XMEGA architecture + * - Library Applications: + * - Fixed incorrect signature bytes returned in the DFU bootloader + * + * \section Sec_ChangeLog130901 Version 130901 + * <b>New:</b> + * - Core: + * - Added additional MIDI command definitions to the MIDI class driver (thanks to Daniel Dreibrodt) + * - Added new CONCAT() and CONCAT_EXPANDED() convenience macros + * - Added new Printer Device Class driver + * - Added support for the XMEGA C3 Xplained board + * - Added support for the U2S board (thanks to megal0maniac) + * - Added TWI Master driver for the XMEGA architecture (thanks to Michael Janssen) + * - Library Applications: + * - Added new Printer class bootloader + * - Added new Mass Storage class bootloader + * - Added XMEGA support for class driver device demos (where applicable) + * - Added Python host application example for the Generic HID class driver device demo + * - Added Python alternative host application for the HID class bootloader + * + * <b>Changed:</b> + * - Core: + * - Updated the BUILD build system module to produce binary BIN files in addition to Intel HEX files + * - Updated the Android Accessory Class to accept version 2 protocol devices (with version 1 functionality) + * - All board drivers now implement dummy functions and constants when BOARD is set to NONE + * - Added missing LEDs to the XMEGA A3BU Xplained board LED driver (thanks to Michael Janssen) + * - Changed board Dataflash drivers to automatically configure the appropriate SPI interface for the selected board + * - Library Applications: + * - Re-added Set Control Line State request handling to the CDC class bootloader to prevent issues with the .NET serial + * class (thanks to Erik Lins) + * - TemperatureDataLogger project dummy RTC mode now tracks real time (thanks to David Lazarus) + * + * <b>Fixed:</b> + * - Core: + * - Fixed Low Speed USB devices broken when using the library HID Class driver (thanks to Michael) + * - Fixed possible register corruption in USB Host mode on AVR8 devices when ORDERED_EP_CONFIG is used (thanks to Martin Aakerberg) + * - Fixed Pipe_GetBoundEndpointAddress() returning invalid endpoint directions on AVR8 architecture devices (thanks to decerri) + * under some circumstances + * - Fixed incorrect USB device state set when a suspended LUFA device is woken while addressed but not configured (thanks to Balaji Krishnan) + * - Fixed broken USART SPI driver for the AVR8 architecture due to incorrect initialization + * - Fixed re-enumeration issue of XMEGA architecture targets (thanks to Jaroslav Jedlinsky) + * - Fixed error receiving PIMA events via the Still Image Host class driver + * - Library Applications: + * - Added handler for SCSI_CMD_START_STOP_UNIT in demos using the Mass Storage class, to prevent ejection errors on *nix systems due to an + * unknown SCSI command + * - Fixed incorrect HID report descriptor generated for 16-bit axis ranges by the HID_DESCRIPTOR_MOUSE() and HID_DESCRIPTOR_JOYSTICK() + * macros (thanks to Armory) + * - Fixed incorrect HID report descriptor generated for button multiples of 8 by the HID_DESCRIPTOR_MOUSE() and HID_DESCRIPTOR_JOYSTICK() + * macros + * - Fixed race condition in the DFU class bootloader causing failed device reprogramming in some circumstances (thanks to Luis Mendes) + * - Fixed incorrect time/date configuration data order in the TempDataLogger host application (thanks to David Lazarus) + * + * \section Sec_ChangeLog130303 Version 130303 + * <b>New:</b> + * - Core: + * - Added support for the Arduino Leonardo board + * - Added support for the Atmel UC3-A3 Xplained board + * - Added support for the Xevelabs USB2AX revision 3.1 board + * - Added support for the Dimex Stange-ISP board (thanks to Gerhard Wesser) + * - Added new \c doxygen_upgrade and \c doxygen_create targets to the DOXYGEN build system module + * - Added new Board Hardware Information board driver + * - Library Applications: + * - Added a different device serial number when the AVRISP-MKII Clone project is in libUSB compatibility mode, so that + * both the libUSB and Jungo drivers can be installed at the same time without having to use a filter driver + * + * <b>Changed:</b> + * - Core: + * - Added workaround for broken VBUS detection on AVR8 devices when a bootloader starts the application + * via a software jump without first turning off the OTG pad (thanks to Simon Inns) + * - Library Applications: + * - Increased throughput in the USBtoSerial project now that data transmission is non-blocking (thanks to Joseph Lacerte) + * - Updated bootloader makefiles to remove dependency on the \c bc command line calculator tool + * - Updated AVRISP-MKII Clone Programmer project so that the SCK clock period is saved in EEPROM (thanks to Gerhard Wesser) + * - Changed all *_SendByte() function prototypes to accept a void pointer for the input buffer (thanks to Simon Kuppers) + * + * <b>Fixed:</b> + * - Core: + * - Fixed incorrectly issuing STALL response to unsupported control request SETUP packets, rather than in the data/status stage + * - Fixed inverted LEDs_GetLEDs() function implementation for the Benito, Minimus and Arduino UNO boards + * - Fixed missing Windows 32-bit compatibility sections in the LUFA INF driver files (thanks to Christan Beharrell) + * - Fixed logic hole breaking USB operations on a USB controller with only one supported USB mode and no USB_DEVICE_ONLY or USB_HOST_ONLY + * configuration token set + * - Fixed possible rounding in the VERSION_BCD() macros for some 0.01 step increments (thanks to Oliver Zander) + * - Fixed incorrect Dataflash functionality in the USBKEY board if the driver is modified for a single Dataflash chip (thanks to Jonathan Oakley) + * - Fixed incorrect definitions of \c HID_KEYBOARD_LED_KANA, \c HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN and \c HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN_AS400 + * and added a missing definition for \c HID_KEYBOARD_SC_APPLICATION (thanks to David Monro) + * - Fixed maximum allowed keyboard key code usage of \c 0x65 rather than \c 0xFF for the \c HID_DESCRIPTOR_KEYBOARD() macro (thanks to David Monro) + * - Fixed hardware race condition that could cause failed device enumerations for AVR8 and UC3 architectures (thanks to Mike Beyhs) + * - Fixed incorrect Minimus board LED definitions (thanks to Joonas Lahtinen) + * - Fixed incorrect ordering of the linker options in the build system causing link failures in some cases + * - Fixed bug in the TWI peripheral driver for the AVR8 devices causing incorrect failure codes to be returned in some cases (thanks to Peter K) + * - Fixed swapped LED3 and LED4 masks for the Olimex-32U4 development board LED driver + * - Fixed potential NULL pointer dereference in the HID Host mode Class Driver (thanks to Pavel Kuzmin) + * - Library Applications: + * - Fixed broken RESET_TOGGLES_LIBUSB_COMPAT compile time option in the AVRISP-MKII project + * - Fixed incompatibility in the CDC class bootloader on some systems (thanks to Sylvain Munaut) + * - Fixed lengthy timeouts in the USBtoSerial project if no application on the host is consuming data (thanks to Nicolas Saugnier) + * - Fixed lengthy automatic data flushing in the CDC and MIDI device class drivers + * - Fixed incorrect LED masks for received data display in the Device GenericHID demos (thanks to Denys Berkovskyy) + * - Fixed incorrect output in the HIDReportViewer project when no device is connected (thanks to Pavel Kuzmin) + * + * \section Sec_ChangeLog120730 Version 120730 + * <b>New:</b> + * - Core: + * - Added new, revamped modular build system with new makefile templates + * - Added support for the BitWizard Multio and Big-Multio boards + * - Added support for the DorkbotPDX Duce board + * - Added support for the Olimex AVR-USB-32U4 board + * - Added support for the Olimex AVR-USB-T32U4 board + * - Added support for the Olimex AVR-ISP-MK2 board + * - Added new Endpoint_ConfigureEndpointTable() function + * - Added new Pipe_ConfigurePipeTable() function + * - Added build test to verify correct compilation of all board drivers using all driver APIs + * - Added build test to verify correct compilation of all bootloaders using all supported devices + * - Added build test to verify that there are no detectable errors in the codebase via static analysis + * - Added new JTAG_ENABLE() macro for the AVR8 architecture + * - Library Applications: + * - Modified the CDC Host demos to set a default CDC Line Encoding on enumerated devices + * - Added Dataflash operational checks and aborts to all projects using the Dataflash to ensure it is working correctly before use + * - Added new SerialToLCD user project contributed by Simon Foster + * - Added new RESET_TOGGLES_LIBUSB_COMPAT compile time option to the AVRISP-MKII clone programmer project (thanks to Robert Spitzenpfeil) + * + * <b>Changed:</b> + * - Core: + * - Android Accessory Host property strings changed from a struct of pointer to an array to prevent unaligned access on greater than 8-bit architectures + * - Audio Device Class driver changed to also require the index of the Audio Control interface within the device, for SET/GET/CUR/MIN/MAX/RES property adjustments + * - Removed variable axis support from the HID_DESCRIPTOR_JOYSTICK() macro due to OS incompatibilities, replaced with fixed 3-axis joystick report structure + * - Removed the old pseudo-scheduler from the library as it was unused and deprecated since the 090810 release + * - Endpoint indexes are now specified as full endpoint addresses within the device in device mode, rather than a logical index + * - The Endpoint_ConfigureEndpoint() function no longer takes an endpoint direction as a parameter, as this is now deduced from the specified full endpoint + * address and type + * - The Endpoint_ConfigureEndpoint() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter + * - Endpoints are now configured via instances of a new struct USB_Endpoint_Table_t in all device mode class drivers, rather than a list of endpoint parameters + * - Pipe indexes are now specified as full pipe addresses within the host in host mode, rather than a logical index + * - The Pipe_ConfigurePipe() function no longer takes an pipe token as a parameter, as this is now deduced from the specified full pipe address and type + * - The Pipe_ConfigurePipe() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter + * - Pipes are now configured via instances of a new struct USB_Pipe_Table_t in all host mode class drivers, rather than a list of pipe parameters + * - Added support for various assert and debugging macros for the UC3 devices + * - Changed MIDI event structure MIDI_EventPacket_t to use a single field for the combined virtual cable index and command ID, to prevent bitfield packing issues + * on some architectures (thanks to Darren Gibbs) + * - Changed board LED driver implementations of LEDs_ToggleLEDs() for the AVR8 architecture to use the fast PIN register toggle alternative function for speed + * - Library Applications: + * - Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target + * - Added additional bootloader API data to expose the bootloader start address and class to the DFU and CDC class bootloaders + * - Reverted AVRISP-MKII clone project watchdog based command timeout patch in favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed + * - The library bootloaders will now correctly start the user application after a watchdog-based application start, even if the /HWB line is held low externally + * during the reset phase + * - Increased endpoint polling interval for all demos and projects to 5ms, as 1ms was causing some enumeration issues on some machines (thanks to Riku Salminen) + * + * <b>Fixed:</b> + * - Core: + * - Fixed possible enumeration error if the user application selects a pipe other than the default Control pipe between the Powered and Default states of + * the host state machine + * - Fixed incorrect call to the user callback CALLBACK_Audio_Device_GetSetInterfaceProperty() in the Audio Class device driver (thanks to Tiit Ratsep) + * - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid) + * - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin) + * - Fixed inverted LED logic in the OLIMEX162 board LED driver + * - Fixed incorrect response to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock) + * - Fixed inverted LED logic in the USB2AX board LED driver + * - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by + * the stack (thanks to Jonathan Hudgins) + * - Fixed broken MIDI host driver MIDI_Host_ReceiveEventPacket() function due to not unfreezing the MIDI data IN pipe before use (thanks to Michael Brown) + * - Fixed swapped Little Endian/Big Endian endpoint and pipe write code for the UC3 devices (thanks to Andrew Chu) + * - Fixed the JTAG_DISABLE() macro clearing all other bits in MCUSR when called + * - Fixed incorrect Micropendous board LED driver LEDs_SetAllLEDs() and LEDs_ChangeLEDs() function implementations (thanks to MitchJS) + * - Fixed endianess issues in the RNDIS host class driver for UC3 devices (thanks to Andrew Chu) + * - Library Applications: + * - Fixed error in the AVRISP-MKII programmer when ISP mode is used at 64KHz (thanks to Ben R. Porter) + * - Fixed AVRISP-MKII programmer project failing to compile for the U4 chips when VTARGET_ADC_CHANNEL is defined to an invalid channel and NO_VTARGET_DETECT is + * defined (thanks to Steven Morehouse) + * - Fixed AVRISP-MKII programmer project reset line polarity inverted when the generated EEP file is loaded into the USB AVR's EEPROM and avr-dude is used + * - Fixed CDC and DFU bootloaders failing to compile when the bootloader section size is 8KB or more (thanks to Georg Glock) + * - Fixed CDC and DFU bootloaders API function offsets incorrect on some devices (thanks to Rod DeMay) + * - Fixed incorrect DFU version number reported to the host in the DFU bootloader descriptors (thanks to Georg Glock) + * - Fixed incorrect version hundredths value encoding in VERSION_BCD() macro (thanks to Georg Glock) + * - Fixed invalid configuration descriptor in the low level KeyboardMouse device demo (thanks to Jun Wako) + * - Fixed CDC and DFU bootloaders API page erase and write function failures (thanks to Martin Lambert) + * + * \section Sec_ChangeLog120219 Version 120219 + * <b>New:</b> + * - Core: + * - Added support for the XMEGA A3BU Xplained board + * - Added support for the new B series XMEGA devices + * - Added support for version 2 of the Teensy boards (thanks to Christoph Redecker) + * - Added support for the USB2AX boards, hardware revision 1-3 + * - Added new Android Accessory Host class driver + * - Added new USB_Host_GetDescriptor(), USB_Host_GetDeviceConfiguration() and USB_Host_GetInterfaceAltSetting() functions + * - Added new CALLBACK_Audio_Device_GetSetInterfaceProperty() callback to the Audio Device Class driver + * - Added new LEDs_Disable(), Buttons_Disable() and Joystick_Disable() functions to the board hardware drivers + * - Added support for the Micropendous family of boards (Arduino-like revisions 1 and 2, DIP, 32U2, A, 1, 2, 3 and 4) + * - Added INVERTED_VBUS_ENABLE_LINE and NO_AUTO_VBUS_MANAGEMENT compile time options (thanks to Opendous Inc.) + * - Added support for the Atmel XMEGA B1 Xplained board + * - Added Serial USART peripheral driver for the XMEGA architecture + * - Added Master Mode SPI USART peripheral driver for the XMEGA and AVR8 architectures + * - Added build test to verify correct compilation of as many modules as possible under as many architectures as possible under the C and C++ languages + * - Added build test to verify correct compilation of the USB driver when forced into single USB mode under as many architectures as possible + * - Library Applications: + * - Added User Application APIs to the CDC and DFU class bootloaders + * - Added INVERTED_ISP_MISO compile time option to the AVRISP-MKII clone project (thanks to Chuck Rohs) + * - Added new Android Accessory Host demo (thanks to Opendous Inc.) + * + * <b>Changed:</b> + * - Core: + * - When automatic PLL management mode is enabled on the U4 series AVR8 chips, the PLL is now configured for 48MHz and not + * a divided 96MHz, to lower power consumption and to keep the system within the datasheet specs for 3.3V operation (thanks to Scott Vitale) + * - Added Class, ClassDevice, ClassHost and ClassCommon to the internal class driver source filenames to prevent ambiguities + * - Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached device can be recovered from automatically without + * having to reset the Mass Storage interface + * - USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors) + * - Reordered board name definition indexes so that a misspelled BOARD compile option will default to BOARD_USER rather than BOARD_USBKEY + * - Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage + * - All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance + * - Library Applications: + * - Altered the Mass Storage Host LowLevel demo so that SCSI data STALLs from the attached device can be recovered from automatically without + * having to reset the Mass Storage interface + * - Updated the AVRISP-MKII Clone programmer project to be compatible with the latest version of AVR Studio (version 5.1) + * - Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent + * warnings in AVR Studio 5.1 when programming XMEGA devices + * - Allow serial strings to be generated on the older AVR8 devices which do not explicitly state they contain unique values in the datasheet, + * as this appears to be implemented in hardware + * + * <b>Fixed:</b> + * - Core: + * - Fixed ring buffer size limited to 255 elements, instead of the intended 65535 elements. + * - Fixed CDC class drivers not saving and sending all 16-bits of the control line states (thanks to Matthew Swabey) + * - Fixed race conditions in the CDC, HID and Mass Storage class drivers when processing some control requests + * - Fixed misspelled HID_KEYBOARD_MODIFIER_* macros in the HID class driver (thanks to Laszlo Monda) + * - Fixed broken AVR32 endpoint/pipe communications when ORDERED_EP_CONFIG compile time option is not enabled (thanks to Matthias Jahr) + * - Fixed broken compilation for the AVR32 devices if the NO_SOF_EVENTS compile time option was not enabled (thanks to Matthias Jahr) + * - Fixed compiler warning on GCC with \c -wundef compile flag is used (thanks to Georg Glock) + * - Fixed incorrect implementation of LEDs_ToggleLEDs() for the Adafruit-U4 board (thanks to Caroline Saliman) + * - Fixed broken compilation of LUFA under C++ compilers when the Serial peripheral module header file is included in a C++ source file + * - Fixed missing semicolon in the UC3 architecture host pipe functions + * - Fixed failed compilation for the XMEGA architecture if USB_DEVICE_ONLY us not specified + * - Fixed UC3 architecture ignoring the pipe size when Pipe_ConfigurePipe() is called + * - Library Applications: + * - Added reliability patches to the AVRISP-MKII Clone project's PDI/TPI protocols (thanks to Justin Mattair) + * - Fixed AVRISP-MKII Clone compile warning on AVR8 U4 targets even when NO_VTARGET_DETECT is enabled + * - Fixed AVRISP-MKII Clone failing to start application firmware once a TPI programming session is exited + * - Fixed DFU class bootloader not resetting the LED pins as high impedance inputs when a software jump to the user applications is requested + * - Fixed AVRISP-MKII Clone timing out on long programming commands such as programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling) + * - Fixed invalid PID value used in the TempDataLogger project host application (thanks to Anupam Pathak) + * + * \section Sec_ChangeLog111009 Version 111009 + * <b>New:</b> + * - Core: + * - Added USE_LUFA_CONFIG_HEADER compile time option to include a LUFAConfig.h header in the user director for LUFA configuration + * tokens as an alternative to tokens defined in the project makefile + * - Added new USB_Host_SetInterfaceAltSetting() convenience function for the selection of an interface's alternative setting + * - Added Audio class control request definitions + * - Added new CALLBACK_Audio_Device_GetSetEndpointProperty() callback to the Audio Device Class driver to allow for endpoint control manipulations + * such as data sample rates + * - Added support for the Audio class GET STATUS request in the Audio Device Class driver so that it is correctly ACKed when sent by the host + * - Added new EVENT_Audio_Device_StreamStartStop() event to the Audio Device Class driver to detect stream start/stop events + * - Added board driver support for the Busware TUL board + * - Added board hardware driver support for the EVK1100 board + * - Added board hardware driver support for the EVK1104 board + * - Added new Host mode Audio Class driver + * - Added new SPI_GetCurrentMode() function to the SPI peripheral driver + * - Added RingBuffer_GetFreeCount() function to the Ring Buffer driver + * - Added new HID_Host_SetIdlePeriod() function to the HID Host Class driver + * - Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device + * - Added new USB_Host_GetDeviceStatus() function to the host standard request function set + * - Added AVR USB XMEGA architecture port (currently incomplete/experimental) + * - Added new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros + * - Added new JTAG_DISABLE() macro for the AVR8 architecture + * - Added Device Qualifier standard descriptor structure definitions USB_StdDescriptor_DeviceQualifier_t and USB_Descriptor_DeviceQualifier_t + * - Library Applications: + * - Added RNDIS device mode to the Webserver project + * - Added new incomplete AndroidAccessoryHost Host LowLevel demo + * - Added new HIDReportViewer project + * - Added new MediaControl project + * - Added new AudioInputHost Host ClassDriver demo + * - Added new AudioOutputHost Host ClassDriver demo + * - Added new AudioInputHost Host LowLevel demo + * - Added new AudioOutputHost Host LowLevel demo + * - Added new "checksource" target to all library project makefiles + * - Added new VTARGET_USE_INTERNAL_REF configuration option to the AVRISP-MKII clone project (thanks to Volker Bosch) + * + * <b>Changed:</b> + * - Core: + * - Altered the definition of the USB_Audio_Descriptor_Format_t descriptor so that the user is now responsible for supplying + * the supported audio sampling rates, to allow for multiple audio interfaces with different numbers of supported rates and/or + * continuous sample rates + * - Pipe_BoundEndpointNumber() has been renamed to Pipe_GetBoundEndpointAddress(), and now returns the correct endpoint direction + * as part of the endpoint address + * - Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to, + * by changing the USB_* prefix to USB_Device_* or USB_Host_* + * - Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required + * - Altered the USB_Host_SetDeviceConfiguration() function to update the global Host state machine state and the new + * USB_Host_ConfigurationNumber global as required + * - Added endian correcting code to the library USB class drivers for multiple architecture support + * - Removed the ENDPOINT_DESCRIPTOR_DIR_* macros, replaced by ENDPOINT_DIR_* instead + * - Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT() + * - Added variable number of axis to HID_DESCRIPTOR_JOYSTICK() for multi-axis joysticks above just X and Y + * - Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device, + * and not a Pipe within the host + * - The MS_Host_ResetMSInterface() now performs a full Mass Storage reset sequence to prevent data corruption in the event of a device + * lock up or timeout (thanks to David Lyons) + * - Added endian-correction to the CDC driver's Line Encoding control request handlers. + * - Library Applications: + * - Modified the Low Level and Class Driver AudioInput and AudioOutput demos to support multiple audio sample rates + * - Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration + * instead of manual host state machine manipulations in the main application task + * - Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines + * - Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair) + * + * <b>Fixed:</b> + * - Core: + * - Large number of documentation and code comment corrections (thanks to Andrey from Microsin.ru) + * - Fixed possibility of the AVR's SPI interface being pulled out of master mode if the /SS pin is a input and pulled low (thanks + * to Andrey from Microsin.ru) + * - Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time + * option was not enabled on the AVR8s + * - Fixed lack of C++ compatibility in some internal header files causing compile errors when using LUFA in C++ projects + * - Fixed error in the pipe unordered allocation algorithm for the AVR8 devices breaking compatibility with some devices + * - Fixed USB_USBTask not being called internally in stream transfers between packets when Partial Stream Transfers are used + * - Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values + * - Fixed TWI_ReadPacket() not releasing the TWI bus on read completion + * - Fixed optimization error in the HID Parser item value USB_SetHIDReportItemInfo() and USB_GetHIDReportItemInfo() routines if the report item was + * \c NULL (which should be allowable according to the API) + * - Fixed HID Parser CALLBACK_HIDParser_FilterHIDReportItem() callback function not being passed a cacheable report item pointer + * - Fixed HID Parser's largest report size bit count not including the size of the last parsed report item + * - Fixed HID host driver's largest HID report size count corrupt when the number of report bits exceeds 255 + * - Library Applications: + * - Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2 + * - Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed + * - Fixed compile errors in the incomplete BluetoothHost demo application (thanks to Timo Lindfors) + * - Fixed incorrect Dataflash buffer use in the DataflashManager_WriteBlocks_RAM() function of several demos/projects (thanks to Jeremy Willden) + * - Fixed incorrect logging interval (always 500ms longer than requested) in the TempDataLogger project + * - Fixed incorrect buffer size check in the USBtoSerial project (thanks to Yuri A Nikiforov) + * - Fixed port state table corruption in the TCP layer of the RNDIS Ethernet device demos + * + * \section Sec_ChangeLog110528 Version 110528 + * <b>New:</b> + * - Core: + * - Added new ORDERED_EP_CONFIG compile time option to restrict endpoint/pipe configuration to ascending order + * in exchange for a smaller compiled program binary size + * - Added a new general RingBuff.h miscellaneous ring buffer library driver header + * - Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointer accesses + * - Added new GCC_MEMORY_BARRIER() macro to prevent instruction reordering across boundaries + * - Added basic driver example use code to the library documentation + * - Added new Endpoint_Null_Stream() and Pipe_Null_Stream() functions + * - Added new ADC_GET_CHANNEL_MASK() convenience macro + * - Added new HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors + * - Added new HID_DESCRIPTOR_MOUSE(), HID_DESCRIPTOR_KEYBOARD(), HID_DESCRIPTOR_JOYSTICK() and HID_DESCRIPTOR_VENDOR() macros + * for easy automatic creation of basic USB HID device reports + * - Added new MAX() and MIN() convenience macros + * - Added new Serial_SendData() function to the Serial driver + * - Added board driver support for the Sparkfun ATMEGA8U2 breakout board + * - Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus) + * - Internal restructuring for eventual multiple architecture ports + * - Added AVR32 UC3 architecture port (currently incomplete/experimental) + * - Added new architecture independent functions to enable, disable, save and restore the Global Interrupt Enable flags + * - Added new RNDIS Device Class Driver packet send and receive functions + * - Library Applications: + * - Added ability to write protect Mass Storage disk write operations from the host OS + * - Added new MIDIToneGenerator project + * - Added new KeyboardMouseMultiReport Device ClassDriver demo + * - Added new VirtualSerialMassStorage Device ClassDriver demo + * - Added HID class bootloader, compatible with a modified version of the command line Teensy loader from PJRC.com + * - Added LED flashing to the CDC and DFU class bootloaders to indicate when they are running + * + * <b>Changed:</b> + * - Core: + * - Unordered Endpoint/Pipe configuration is now allowed once again by default via the previous reconfig workaround + * - Refactored Host mode Class Driver *_Host_ConfigurePipes() routines to be more space efficient when compiled + * - Added new *_ENUMERROR_PipeConfigurationFailed error codes for the *_Host_ConfigurePipes() routines + * - The USARTStream global is now public and documented in the SerialStream module, allowing for the serial USART + * stream to be accessed via its handle rather than via the implicit stdout and stdin streams + * - The FAST_STREAM_TRANSFERS compile time option has been removed due to lack of use and low cost/benefit ratio + * - Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location + * where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction + * should be performed in one chunk) + * - The NO_STREAM_CALLBACKS compile time option has now been removed due to the new partial stream transfer feature + * - Changed over all project and demo HID report descriptors to use the new HID report item macros + * - Moved the HIDParser.c source file to the LUFA/Drivers/USB/Class/Common/ directory from the LUFA/Drivers/USB/Class/Host/ + * - Added support to the HID parser for extended USAGE items that contain the usage page as well as the usage index + * - Removed the SerialStream driver, rolled functionality into the regular Serial peripheral driver via the new + * Serial_CreateStream() and Serial_CreateBlockingStream() functions + * - Renamed the low level Serial byte send/receive functions, to be consistent with the CDC class driver byte functions + * - Altered the behaviour of the serial byte reception function so that is is non-blocking, and now returns a negative + * value if no character is received (to remain consistent with the CDC class driver byte reception routines) + * - Renamed the PRNT_Host_SendString(), CDC_Host_SendString() and CDC_Device_SendString() functions to *_SendData(), and + * added new versions of the *_SendString() routines that expect a null terminated string instead + * - Renamed all driver termination *_ShutDown() functions to the more logical name *_Disable() + * - Reduced latency for executing the Start-Of-Frame events (if enabled in the user application) + * - Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called + * - Endpoint_ResetFIFO() renamed to Endpoint_ResetEndpoint(), to be consistent with the Pipe_ResetPipe() function name + * - Implemented on-demand PLL clock generation for the U4, U6 and U7 series USB AVRs when automatic PLL mode is specified + * - F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports + * - Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of + * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures + * - Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of + * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures + * - Separated out board drivers by architecture in the library internals for better organisation + * - Library Applications: + * - Changed the XPLAINBridge software UART to use the regular timer CTC mode instead of the alternative CTC mode + * via the Input Capture register, to reduce user confusion + * - Combined page and word ISP programming mode code in the AVRISP-MKII clone project to reduce compiled size and + * increase maintainability of the code + * - Changed over library projects to use the new general ring buffer library driver module + * - Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function + * - Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition + * - Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0 + * for other uses + * - Updated the software USART code in the XPLAIN Bridge application so that the incoming bits are sampled at their mid-point + * instead of starting point, to give maximum reliability (thanks to Anton Staaf) + * + * <b>Fixed:</b> + * - Core: + * - Fixed broken USBFOO board drivers due to missing BOARD_USBFOO define + * - Fixed HID host class driver incorrectly binding to HID devices that do not have an OUT endpoint + * - Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.) + * - Fixed incorrect definition of the HID_KEYBOARD_SC_RIGHT_ARROW constant in the HID class driver (thanks to Joby Taffey) + * - Fixed incorrect endpoint initialisation order in the several device demos (thanks to Rick Drolet) + * - Fixed inverted Minimus board LEDs + * - Fixed incorrect byte ordering in the Audio_Device_WriteSample24 function (thanks to WZab) + * - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect + * error code enum (thanks to Daniel Seibert) + * - Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used + * - Fixed incorrect BUTTONS_BUTTON1 definition for the Minimus board + * - Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe) + * is found + * - Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine + * - Fixed Remote Wakeup broken on the AVRs due to the mechanism only operating when the SUSPI bit is set (thanks to Holger Steinhaus) + * - Fixed possible invalid program execution when in host mode if corrupt descriptor lengths are supplied by the attached device + * - Library Applications: + * - Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy + * - Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground + * - Fixed broken HID_REQ_GetReport request handler in the Low Level GenericHID demo + * - Fixed possible lost data in the XPLAINBridge, USBtoSerial and Benito projects when the host exceeds the packet + * timeout period on received packets as set by USB_STREAM_TIMEOUT_MS (thanks to Justin Rajewski) + * - Fixed possible programming problem in the AVRISP-MKII clone project when programming specific patterns into a target + * memory space that is only byte (not page) addressable + * - Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov) + * - Fixed programming errors in the AVRISP-MKII project when the programming packet is a round multiple of the endpoint bank + * size under avrdude (thanks to Steffan Woltjer) + * + * + * \section Sec_ChangeLog101122 Version 101122 + * <b>New:</b> + * - Core: + * - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously + * not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger) + * - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c + * - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number + * - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application + * handling of USB Start of Frame events while in USB Host mode + * - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the + * Print Host Class driver + * - Added class specific descriptor alternative struct type defines with standard USB-IF element naming + * - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory + * - Added board hardware driver support for the Adafruit U4 breakout board + * - Added board hardware driver support for the Arduino Uno development board + * - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team) + * - Added board hardware driver support for the Busware BUI development board + * - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann) + * - Added board hardware driver support for the Kernel Concepts USBFOO development board + * - Added board hardware driver support for the Linnix UDIP development board + * - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett) + * - Added board hardware driver support for the Maximus board (thanks to the PSGroove team) + * - Added board hardware driver support for the Microsin AVR-USB162 breakout board + * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team) + * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management + * tasks for each driver is called + * - Added standard keyboard HID report scan-code defines (thanks to Laszlo Monda) + * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions + * - Library Applications: + * - Added default test tone generation mode to the Device mode AudioInput demos + * - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the + * CDC class bootloader + * - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light) + * + * <b>Changed:</b> + * - Core: + * - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions + * depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing + * with basic code + * - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove + * the need for extra casting inside the callback (thanks to Jonathan Kollasch) + * - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode + * - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode + * - Renamed and moved class driver common constant definitions to make the naming scheme more uniform + * - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another + * - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for + * the given endpoint + * - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present) + * - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be separately included + * - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called + * - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library + * request handlers, not afterwards + * - Library Applications: + * - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints + * - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant + * SCSI_Codes.h file as these values are part of the MassStorage Class Driver + * - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel + * does not exist on these chips (thanks to Marco) + * - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data + * transferred as quickly as possible without any processing in between sections, so that long callbacks or event handlers will + * not break communications with the host by exceeding the maximum control request stage timeout period + * - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible + * to free up the Start of Frame flag for interrupt use in the user application + * - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany) + * - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive + * - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices + * - All LowLevel demos changed to use the constants and types defined in the USB class drivers + * - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer + * - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times + * - Changed ClassDriver MIDI demos to process all incoming events in a loop until the bank becomes empty rather than one at a time + * - Changed LowLevel MIDI demos to only clear the incoming event bank once it has become empty to support packed event packets + * + * <b>Fixed:</b> + * - Core: + * - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist + * within the supplied report of a multiple report HID device + * - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped + * in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger) + * - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev) + * - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts + * - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe + * - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode + * - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests + * - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target + * - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver + * - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set + * - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called + * - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings + * - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured + * - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green) + * - Library Applications: + * - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to + * missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger) + * - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control + * request handler + * - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value + * - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2 + * - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev) + * - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used + * - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules + * - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full + * - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor + * - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics) + * - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode + * + * + * \section Sec_ChangeLog100807 Version 100807 + * <b>New:</b> + * - Added new ADC_DisableChannel() function (thanks to Mich Davis) + * - Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to the AVRISP-MKII programmer project to set + * the VTARGET reference voltage and scale factor + * - Added new pgm_read_ptr() macro to Common.h for reading of pointers out of flash memory space + * - Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time + * - Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros + * - Added new AVRStudio 4 project files for all library demos, projects and bootloaders + * - Added ability to set the serial baud rate via the user's terminal in the XPLAINBridge project + * - Added new LUFA module variables for the different source modules in the core library makefile to simplify project makefiles + * - Added start of a new Test and Measurement class demo (thanks to Peter Lawrence) + * - Added new SPI_ORDER_* data order masks to the SPI peripheral driver + * - Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver + * - Added support for the new button/LED on the latest model USBTINY-MKII + * + * <b>Changed:</b> + * - The RingBuff library code has been replaced in the XPLAINBridge, Benito and USBtoSerial projects with an ultra lightweight + * ring buffer to help improve the reliability of the projects + * - The EEPROM stream read/write functions now use eeprom_update_byte() instead of eeprom_write_byte(), so that only + * changed bytes are written to EEPROM to preserve its lifespan + * - Changed over the AVRISP-MKII and TemperatureDataLogger projects to use eeprom_update_byte() when writing non-volatile + * parameters to EEPROM to preserve its lifespan + * - Removed unused line encoding data and control requests from the CDC Bootloader code, to save space + * - Renamed SERIAL_STREAM_ASSERT() macro to STDOUT_ASSERT() + * - The USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros have been deleted, as they are now obsolete + * - Rewrote the implementation of the SwapEndian_16() and SwapEndian_32() functions so that they compile down in most instances to + * minimal loads and stores rather than complicated shifts + * - The software UART in the XPLAINBridge has been largely altered to try to improve upon its performance and reliability + * - The USBtoSerial and Benito projects now flushes received data via a flush timer, so that several bytes can be transmitted at once + * - Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistencies between the + * behaviour of the command line tools used to perform the check on each platform + * - Internal USB driver source files renamed and moved to ease future possible architecture ports + * - All internal pseudo-function macros have been converted to true inline functions for type-safety and readability + * - Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED + * - Altered the CDC Device and Host Class drivers' receive byte routines, so that no data is indicated by the function returning a + * negative value (thanks to Andreas Paulin) + * - Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer + * + * <b>Fixed:</b> + * - Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from + * the last page of FLASH (thanks to Gerard Sexton) + * - Fixed AVRISP project not sending a full erase-and-write EEPROM command to XMEGA targets when writing to the EEPROM + * instead of the split write-only command (thanks to Tim Margush) + * - Fixed RNDISEthernet demos crashing when calculating checksums for Ethernet/TCP packets of more than ~500 bytes due to + * an overflow in the checksum calculation loop (thanks to Kevin Malec) + * - Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host + * - Fixed incorrect signature for the ATMEGA32U2 in the DFU bootloader (thanks to Axel Rohde) + * - Fixed internal device serial not being accessible on the ATMEGAXXU2 AVRs (thanks to Axel Rohde) + * - Fixed void pointer arithmetic in ConfigDescriptor.h breaking C++ compatibility (thanks to Michael Hennebry) + * - Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project + * - Fixed USB_Device_SendRemoteWakeup() not working when the USB clock was frozen during USB bus suspend (thanks to Brian Dickman) + * - Fixed occasional lockup of the AVRISP project due to the timeout extension code incorrectly extending the timeout in + * PDI and TPI programming modes infinitely + * - Fixed HID device class driver still using PrevReportINBuffer for GetReport control requests even when it has been + * set to NULL by the user application (thanks to Axel Rohde) + * - Fixed MIDI_Device_SendEventPacket() not correctly waiting for the endpoint to become ready (thanks to Robin Green) + * - Fixed Benito and USBtoSerial projects not turning off the USART before reconfiguring it, which could cause incorrect + * operation to occur (thanks to Bob Paddock) + * - Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation + * to occur (thanks to Bob Paddock) + * - Fixed software application start command broken in the DFU class bootloader when dfu-programmer is used due to application + * start address corruption + * + * + * \section Sec_ChangeLog100513 Version 100513 + * <b>New:</b> + * - Added incomplete MIDIToneGenerator project + * - Added new Relay Controller Board project (thanks to OBinou) + * - Added board hardware driver support for the Teensy, USBTINY MKII, Benito and JM-DB-U2 lines of third party USB AVR boards + * - Added new ATTR_NO_INIT variable attribute for global variables that should not be automatically cleared on startup + * - Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so that the stream functions early-abort if the bus + * is suspended before or during a transfer + * - Added new EVENT_CDC_Device_BreakSent() event and CDC_Host_SendBreak() function to the Device and Host CDC Class drivers + * - Added ReportType parameter to the HID device class driver CALLBACK_HID_Device_ProcessHIDReport() function so that FEATURE + * reports from the host to the device can be correctly processed + * - Added ReportType parameter to the HID host class driver HID_Host_SendReportByID() function so that FEATURE reports can be + * issued to the attached device + * + * <b>Changed:</b> + * - AVRISP programmer project now has a more robust timeout system + * - Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond + * - Webserver project now uses the board LEDs to indicate the current IP configuration state + * - Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable the TELNET server if desired + * - Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.) + * - Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled. + * - Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders + * and projects + * - All Class Driver Host mode demos now correctly set the board LEDs to READY once the enumeration process has completed + * - Added LIBUSB_FILTERDRV_COMPAT compile time option to the AVRISP programmer project to make the code compatible with Windows + * builds of avrdude at the expense of AVRStudio compatibility + * - Removed two-step endpoint/pipe bank clear and switch sequence for smaller, faster endpoint/pipe code + * - The USB_Init() function no longer calls sei() - the user is now responsible for enabling interrupts when they are ready + * for them to be enabled (thanks to Andrei Krainev) + * - The Audio_Device_IsSampleReceived() and Audio_Device_IsReadyForNextSample() functions are now inline, to reduce overhead + * - Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be + * selected (thanks to Steffan Woltjer) + * - Removed software PDI and TPI emulation from the AVRISP-MKII clone project as it was very buggy and slow - PDI and TPI must + * now be implemented via separate programming headers + * - The CDC class bootloader now uses a watchdog reset rather than a soft-reset when exited to ensure that all hardware is + * properly reset to their defaults + * - Device mode class driver callbacks are now fired before the control request status stage is sent to prevent the host from + * timing out if another request is immediately fired and the device has a lengthy callback routine + * - The TeensyHID bootloader has been removed, per request from Paul at PJRC + * - The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed + * LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver + * + * <b>Fixed:</b> + * - Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and the control endpoint is not properly + * selected when the ISR completes + * - Fixed AVRISP-MKII clone project not correctly issuing LOAD EXTENDED ADDRESS commands when the extended address + * boundary is crossed during programming or read back (thanks to Gerard Sexton) + * - Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled + * - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin + * - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register + * - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus + * - Fixed ADC routines not correctly returning the last result when multiple channels were read + * - Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the + * U4 series USB AVR parts + * - Fixed LowLevel MassStorage demo broken on the U2 series USB AVRs due to unsupported double-banked endpoint modes used + * - Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian) + * - Fixed incorrect definition of HID_ALIGN_DATA() causing incorrect HID report item data alignment + * - Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending + * a valid session ID to the device + * - Removed invalid dfu and flip related targets from the bootloaders - bootloaders can only be replaced with an external programmer + * - Fixed Set/Clear Feature requests directed to a non-configured endpoint not returning a stall to the host + * - Fixed HID Device Class Driver not allocating a temporary buffer when the host requests a report via the control endpoint and the + * user has set the PrevReportINBuffer driver configuration element to NULL (thanks to Lars Noschinski) + * - Fixed device state not being reset to DEVICE_STATE_Default if the host sets a 0x00 device address + * - Fixed device not stalling configuration requests before the device's address has been set + * - Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte + * read (thanks to Andrei Krainev) + * - Fixed device state not being reset back to the default state if the host sets the address to 0 + * - Fixed Set Configuration requests not being stalled until the host has set the device's address + * - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the + * HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set + * - Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other interrupts from occurring while the control endpoint + * request is being processed, causing possible lockups if a USB interrupt occurs during a transfer + * - Remove incorrect Abstract Call Management class specific descriptor from the CDC demos, bootloaders and projects + * + * + * \section Sec_ChangeLog100219 Version 100219 + * + * <b>New:</b> + * - Added TPI programming support for 6-pin ATTINY devices to the AVRISP programmer project (thanks to Tom Light) + * - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected + * to a target + * - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to + * the host as a standard Mass Storage device when inserted + * - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to + * sent or received in packed form in a single USB packet + * - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events + * - Added master mode hardware TWI driver for easy TWI peripheral control + * - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks + * as on some models, the channel number is not identical to its single-ended ADC MUX mask + * - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library + * - New BOARD value option BOARD_NONE (equivalent to not specifying BOARD) which will remove all board hardware drivers which + * do not adversely affect the code operation (currently only the LEDs driver) + * - Added keyboard modifier masks (HID_KEYBOARD_MODIFER_*) and LED report masks (KEYBOARD_LED_*) to the HID class driver and + * Keyboard demos + * - Added .5MHz recovery clock to the AVRISP programmer project when in ISP programming mode to correct mis-set fuses + * + * <b>Changed:</b> + * - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors + * - Renamed the AVRISP project folder to AVRISP-MKII to reduce confusion + * - Renamed the RESET_LINE_* makefile tokens in the AVRISP MKII Project to AUX_LINE_*, as they are not always used for target + * reset + * - Changed over the MassStorageKeyboard Class driver device demo to use Start of Frame events rather than a timer to keep track + * of elapsed milliseconds + * - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space + * - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's + * TDI pin to determine which mode to use + * - Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter + * + * <b>Fixed:</b> + * - Fixed AVRISP project not able to enter programming mode when ISP protocol is used + * - Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit + * - Fixed ADC_IsReadingComplete() returning an inverted result + * - Fixed blocking CDC streams not aborting when the host is disconnected + * - Fixed XPLAIN board Dataflash driver broken due to incorrect preprocessor commands + * - Fixed inverted XPLAIN LED driver output (LED turned on when it was supposed to be turned off, and vice-versa) + * - Fixed Class Driver struct interface numbers in the KeyboardMouse and VirtualSerialMouse demos (thanks to Renaud Cerrato) + * - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers + * - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders + * - Fixed Benito project not resetting the target AVR automatically when programming has completed + * - Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming + * ranges are specified (thanks to Thomas Bleeker) + * - Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two separate pipes, not one half-duplex pipe + * - Fixed Pipe_IsEndpointBound() not taking the endpoint's direction into account + * - Fixed EEPROM and FLASH ISP programming in the AVRISP project + * - Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen) + * - Fixed SerialStream driver blocking while waiting for characters to be received instead of returning EOF + * - Fixed SerialStream driver not setting stdin to the created serial stream (thanks to Mike Alexander) + * - Fixed USB_GetHIDReportSize() returning the number of bits in the specified report instead of bytes + * - Fixed AVRISP project not extending the command delay after each successful page/word/byte program + * - Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baud rates (thanks to Renaud Cerrato) + * + * + * \section Sec_ChangeLog091223 Version 091223 + * + * <b>New:</b> + * - Added activity LED indicators to the AVRISP project to indicate when the device is busy processing a command + * - The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR) + * - Added new XPLAIN USB to Serial Bridge project (thanks to John Steggall for initial proof-of-concept, David Prentice + * and Peter Danneger for revised software USART code) + * - Added new RNDIS Ethernet Host LowLevel demo + * - Added new RNDIS Ethernet Host Class Driver + * - Added new RNDIS Ethernet Host ClassDriver demo + * - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device + * - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair) + * - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different Dataflash used + * on the first revision boards compared to the one mounted on later revisions + * - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype + * - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values + * - Added new EVK527 board target + * - Added new USB_Host_GetDeviceStringDescriptor() convenience function + * - Added new LEDNotification project to the library, to give a visual LED notification on new events from the host + * - Added new NO_DEVICE_REMOTE_WAKEUP and NO_DEVICE_SELF_POWER compile time options + * + * <b>Changed:</b> + * - Removed code in the Keyboard demos to send zeroed reports between two reports with differing numbers of key codes + * as this relied on non-standard OS driver behaviour to repeat key groups + * - The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class + * driver common defines, rather than being defined in the Host mode Class driver section only + * - The USB_MODE_HOST token is now defined even when host mode is not available + * - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to + * indicate the report type to generate + * - All Class Drivers now return false or the "DeviceDisconnected" error code of their respective error enums when a function + * is called when no host/device is connected where possible + * - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to HOST_SENDCONTROL_DeviceDisconnected to be in line + * with the rest of the library error codes + * - Make MIDI device demos also turn off the on board LEDs if MIDI Note On messages are sent with a velocity of zero, + * which some devices use instead of Note Off messages (thanks to Robin Green) + * - The CDC demos are now named "VirtualSerial" instead to indicate the demos' function rather than its implemented USB class, + * to reduce confusion and to be in line with the rest of the LUFA demos + * - The SImage_Host_SendBlockHeader() and SImage_Host_ReceiveBlockHeader() Still Image Host Class driver functions are now public + * + * <b>Fixed:</b> + * - Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver + * - Fixed incorrect values for REPORT_ITEM_TYPE_* enum values causing corrupt data in the HID Host Parser + * - Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions + * - Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount + * - Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK + * - Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero + * - Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction + * - Fixed CDCHost failing on devices with bidirectional endpoints + * - Fixed USB driver failing to define the PLL prescaler mask for the ATMEGA8U2 and ATMEGA16U2 + * - Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items + * - Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a + * STALL to a GET MAX LUN request (thanks to Martin Luxen) + * - Fixed TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting + * - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow + * devices from timing out the data pipes + * - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts + * - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing + * - Fixed use of deprecated struct initializers, removed library unused parameter warnings when compiled with -Wextra enabled + * - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert) + * - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be + * used (thanks to Daniel Levy) + * - Fixed TeensyHID bootloader not enumerating to the host correctly (thanks to Clint Fisher) + * - Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott) + * - Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell) + * + * + * \section Sec_ChangeLog091122 Version 091122 + * + * <b>New:</b> + * - Added new Dual Role Keyboard/Mouse demo + * - Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when + * Report protocol is not needed + * - Added new MIDI LowLevel and ClassDriver Host demo, add new MIDI Host Class driver + * - Added new CDC/Mouse ClassDriver device demo + * - Added new Joystick Host ClassDriver and LowLevel demos + * - Added new Printer Host mode Class driver + * - Added new Printer Host mode ClassDriver demo + * - Added optional support for double banked endpoints and pipes in the Device and Host mode Class drivers + * - Added new stream creation function to the CDC Class drivers, to easily make standard I/O streams from CDC Class driver instances + * + * <b>Changed:</b> + * - Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for syntax errors in the library + * - MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs + * - Cleanups to the Device mode Mass Storage demo application SCSI routines + * - Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer + * samples to and from the device (allowing more time for sample processing and output) + * - Audio class Device mode demos now work at both 16MHz and 8MHz, rather than just at 8MHz + * - The previous USBtoSerial demo has been moved into the projects directory, as it was just a modified CDC demo + * - The Endpoint/Pipe functions now use the const qualifier on the input buffer + * - Changed the CALLBACK_HIDParser_FilterHIDReportItem() callback to pass a HID_ReportItem_t rather than just the current + * item's attributes, to expose more information on the item (including it's type, collection path, etc.) + * - Changed MouseHostWithParser demos to check that the report items have a Mouse usage collection as a parent at some point, + * to prevent Joysticks from enumerating with the demo + * - Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor(). + * - Keyboard LowLevel/ClassDriver demos now support multiple simultaneous key presses (up to 6) per report + * + * <b>Fixed:</b> + * - Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a + * device ID (thanks to Andrei Krainev) + * - Changed LUFA_VERSION_INTEGER define to use BCD values, to make comparisons easier + * - Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe) + * to send report to the attached device + * - Fixed ClassDriver AudioOutput device demo not selecting an audio output mode + * - Fixed incorrect SampleFrequencyType value in the AudioInput and AudioOutput ClassDriver demos' descriptors + * - Fixed incorrect event name rule in demo/project/bootloader makefiles + * - Fixed HID device class driver not reselecting the correct endpoint once the user callback routines have been called + * - Corrected HID descriptor in the Joystick Device demos - buttons should be placed outside the pointer collection + * - Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop + * - Fixed HID host Class driver report send/receive report broken when issued through the control pipe + * - Fixed HOST_STATE_AS_GPIOR compile time option being ignored when in host mode (thanks to David Lyons) + * - Fixed LowLevel Keyboard demo not saving the issues report only after it has been sent to the host + * - Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when given data Length is zero + * + * + * \section Sec_ChangeLog090924 Version 090924 + * + * <b>New:</b> + * - Added new host mode class drivers and matching demos to the library for rapid application development + * - Added flag to the HID report parser to indicate if a device has multiple reports + * - Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and + * USB_Device_DisableSOFEvents() macros to give bus-synchronized millisecond interrupts when in USB device mode + * - Added new Endpoint_SetEndpointDirection() macro for bidirectional endpoints + * - Added new AVRISP project, a LUFA powered clone of the Atmel AVRISP-MKII programmer + * - Added ShutDown() functions for all hardware peripheral drivers, so that peripherals can be turned off after use + * - Added new CDC_Device_Flush() command to the device mode CDC Class driver to flush Device->Host data + * - Added extra masks to the SPI driver, changed SPI_Init() so that the clock polarity and sample modes can be set + * - Added new callback to the HID report parser, so that the user application can filter only the items it is interested + * in to be stored into the HIDReportInfo structure to save RAM + * - Added support for the officially recommended external peripheral layout for the BUMBLEB board (thanks to Dave Fletcher) + * - Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen + * - Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID + * - Added new combined Mass Storage and Keyboard demo (thanks to Matthias Hullin) + * + * <b>Changed:</b> + * - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested + * HID interface within the device, not all HID interfaces + * - Added explicit attribute masks to the device mode demos' descriptors + * - Added return values to the CDC and MIDI class driver transmit functions + * - Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size + * - Added non-null function parameter pointer restrictions to USB Class drivers to improve user code reliability + * - Added new "Common" section to the class drivers, to hold all mode-independent definitions for clarity + * - Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code + * - Altered the SCSI commands in the LowLevel Mass Storage Host to save on FLASH space by reducing function calls + * - Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks + * and data validations internally, to simplify user code + * - Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles + * - The HID report parser now always processed FEATURE items - HID_ENABLE_FEATURE_PROCESSING token now has no effect + * - The HID report parser now always ignores constant-data items, HID_INCLUDE_CONSTANT_DATA_ITEMS token now has no effect + * - The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool + * - Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names + * are used in a project + * - The HID Report Parser now gives information on the total length of each report within a HID interface + * - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate USB_Descriptor_* and + * USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so both may be used + * + * <b>Fixed:</b> + * - Fixed possible lockup in the CDC device class driver, when the host sends data that is a multiple of the + * endpoint's bank + * - Fixed swapped parameters in the HID state memory copy call while processing a HID PUSH item in the HID report parser + * - Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed + * - Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered + * - Fixed USBtoSerial demos not reading in UDR1 when the USART receives data but the USB interface is not enumerated, + * causing continuous USART receive interrupts + * - Fixed misspelled event name in the Class driver USBtoSerial demo, preventing correct operation + * - Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient + * - Added hardware USART receive interrupt and software buffering to the Benito project to ensure received data is not + * missed or corrupted + * - Fixed Device mode HID Class driver always sending IN packets, even when nothing to report + * - Fixed Device mode HID Class driver not explicitly initializing the ReportSize parameter to zero before calling callback + * routine, so that ignored callbacks don't cause incorrect data to be sent + * - Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header + * - Fixed error in the PrinterHost demo preventing the full page data from being sent to the attached device (thanks to John Andrews) + * - Fixed CDC based demos and projects' INF driver files under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker) + * - Re-add in missing flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.) + * - Fix allowable F_CPU values comment in project makefiles to more accurately reflect the allowable values on the USB AVRs + * - Fixed DFU and CDC class bootloaders on the series 2 USB AVRs, corrected invalid signatures, added support for the new + * ATMEGAxx2 series 2 variant AVRs to the DFU bootloader + * - Fixed Low Level USBtoSerial demo not storing received characters (thanks to Michael Cooper) + * - Fixed MIDI Device Class driver not sending/receiving MIDI packets of the correct size (thanks to Thomas Bleeker) + * + * + * \section Sec_ChangeLog090810 Version 090810 + * + * <b>New:</b> + * - Added new device class drivers and matching demos to the library for rapid application development + * - Added new PrinterHost demo (thanks to John Andrews) + * - Added USB Missile Launcher project, submitted by Dave Fletcher + * - Added new Benito Arduino Programmer project + * - Added incomplete device and host mode demos for later enhancement + * - Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30% + * - Error status LEDs shown when device endpoint configuration fails to complete in all demos and projects + * - Added new USB_Host_SetDeviceConfiguration() convenience function for easy configuration selection of devices while in USB + * host mode + * - Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint + * - Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor + * - Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers + * - Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number, + * added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code + * - Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index + * - Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the + * device has been removed (for use when an error occurs or communications with the device have completed) + * - Added new FAST_STREAM_TRANSFERS compile time option for faster stream transfers via multiple bytes copied per stream loop + * - Added stdio stream demo code to the CDC device demos, to show how to create standard streams out of the virtual serial ports + * - Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions + * - Added new USE_FLASH_DESCRIPTORS and FIXED_NUM_CONFIGURATIONS compile time options + * - Added support for the new ATMEGA32U2, ATMEGA16U2 and ATMEGA8U2 AVR models + * - Added new USB_DeviceState variable to keep track of the current Device mode USB state + * - Added new LEDs_ToggleLEDs() function to the LEDs driver + * - Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions + * - Added new DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR compile time options + * - Added 404 Not Found errors to the webserver in the RNDIS demos to indicate invalid URLs + * + * <b>Changed:</b> + * - Deprecated pseudo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused) + * - The device-mode CALLBACK_USB_GetDescriptor() function now has an extra parameter so that the memory space in which the requested + * descriptor is located can be specified. This means that descriptors can now be located in multiple memory spaces within a device. + * - Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality + * - Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead + * - Extended USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch + * - Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, + * no need to call Dataflash_ToggleSelectedChipCS() afterwards + * - Low level API MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready + * - Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors + * - Pipe stream functions now automatically set the correct pipe token, so that bidirectional pipes can be used + * - Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling + * the existing Pipe_SetFiniteINRequests() function + * - Changed F_USB entries in project makefiles to alias to F_CPU by default, as this is the most common case + * - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished + * from one another using foreground colours + * - Internal per-device preprocessing conditions changed to per-device series rather than per-controller group for finer-grain + * internal control + * - Interrupts are no longer disabled during the processing of Control Requests on the default endpoint while in device mode + * - AudioOutput demos now always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS project option) + * - Removed SINGLE_DEVICE_CONFIGURATION compile time option in favor of the new FIXED_NUM_CONFIGURATIONS option so that the exact number + * of device configurations can be defined statically + * - Removed VBUS events, as they are already exposed to the user application via the regular device connection and disconnection events + * - Renamed and altered existing events to properly separate out Host and Device mode events + * - All demos switched over from GNU99 standards mode to C99 standards mode, to reduce the dependencies on GCC-only language extensions + * + * <b>Fixed:</b> + * - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed to fix + * bootloaders on some of the USB AVR devices where avr-libc erroneously defines RAMPZ + * - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived() + * to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while transferring data + * - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is + * cleared to prevent endpoint type corruption + * - Fixed issue opening CDC-ACM ports on hosts when the CDC device tries to send data before the host has set the line encoding + * - Fixed USB_OPT_MANUAL_PLL option being ignored during device disconnects on some models (thanks to Brian Dickman) + * - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken() + * - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.) + * - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use + * - Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command + * - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails + * - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used + * - Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected + * - Fixed Mouse/Keyboard demos not performing the correct arithmetic on the Idle period at the right times (thanks to Brian Dickman) + * - Fixed GenericHID failing HID class tests due to incorrect Logical Minimum and Logical Maximum values (thanks to Soren Greiner) + * - Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews) + * - Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits + * - Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered + * - Fixed incorrect BUTTONS_BUTTON1 for the STK526 target + * - Fixed RNDIS demos freezing when more than one connection was attempted simultaneously, causing memory corruption + * - Fixed USBtoSerial demo receiving noise from the USART due to pull-up not being enabled + * + * + * \section Sec_ChangeLog090605 Version 090605 + * + * - Fixed bug in RNDISEthernet and DualCDC demos not using the correct USB_ControlRequest structure for control request data + * - Fixed documentation showing incorrect USB mode support on the supported AVRs list + * - Fixed RNDISEthernet not working under Linux due to Linux requiring an "optional" RNDIS request which was unhandled + * - Fixed Mouse and Keyboard device demos not acting in accordance with the HID specification for idle periods (thanks to Brian Dickman) + * - Removed support for endpoint/pipe non-control interrupts; these did not act in the way users expected, and had many subtle issues + * - Fixed Device Mode not handling Set Feature and Clear Feature Chapter 9 requests that are addressed to the device (thanks to Brian Dickman) + * - Moved control endpoint interrupt handling into the library itself, enable via the new INTERRUPT_CONTROL_ENDPOINT token + * - Fixed CDCHost not clearing configured pipes and resetting configured pipes mask when a partially enumerated invalid CDC + * interface is skipped + * - Clarified the size of library tokens which accept integer values in the Compile Time Tokens page, values now use the smallest datatype + * inside the library that is able to hold their defined value to save space + * - Removed DESCRIPTOR_ADDRESS() macro as it was largely superfluous and only served to obfuscate code + * - Rewritten event system to remove all macros, to make user code clearer + * - Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley) + * - Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code + * - Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code + * - USB_IsConnected is now cleared before the USB_Disconnect() event is fired in response to VBUS being removed + * - Fixed incorrect PID value being used in the USBtoSerial project (thanks to Phill) + * - Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the + * LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preparation for the new USB class APIs + * - Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure + * - Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt + * - Fixed possible enumeration errors from spin-loops which may fail to exit if the USB connection is severed before the exit condition + * becomes true + * + * + * \section Sec_ChangeLog090510 Version 090510 + * + * - Added new GenericHIDHost demo + * - Corrections to the KeyboardHost and MouseHost demos' pipe handling to freeze and unfreeze the data pipes at the point of use + * - KeyboardHost, MouseHost and GenericHIDHost demos now save and restore the currently selected pipe inside the pipe ISR + * - Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile + * time options + * - All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected + * - Added new PIMA_DATA_SIZE() define to the Still Image Host demo + * - Add call to MassStore_WaitForDataReceived() in MassStore_GetReturnedStatus() to ensure that the CSW has been received in the + * extended MSC timeout period before continuing, to prevent long processing delays from causing the MassStore_GetReturnedStatus() + * to early-abort (thanks to Dmitry Maksimov) + * - Move StdRequestType.h, StreamCallbacks.h, USBMode.h from the LowLevel USB driver directory to the HighLevel USB driver directory, + * where they are more suited + * - Removed all binary constants and replaced with decimal or hexadecimal constants so that unpatched GCC compilers can still build the + * code without having to be itself patched and recompiled first + * - Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to + * outdated avr-libc versions. + * - Added support to the CDCHost demo for devices with multiple CDC interfaces which are not the correct ACM type preceding the desired + * ACM CDC interface + * - Fixed GenericHID demo not starting USB and HID management tasks when not using interrupt driven modes (thanks to Carl Kjeldsen) + * - Fixed RNDISEthenet demo checking the incorrect message field for packet size constraints (thanks to Jonathan Oakley) + * - Fixed WriteNextReport code in the GenericHIDHost demo using incorrect parameter types and not selecting the correct endpoint + * - Adjusted sample CTC timer calculations in the AudioOutput and AudioInput demos to match the CTC calculations in the AVR datasheet, + * and to fix instances where rounding caused the endpoint to underflow (thanks to Robin Theunis) + * - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0), so that other control type + * pipes can be used with the function + * - The USB Host management task now saves and restores the currently selected pipe before and after the task completes + * - Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev) + * - Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favor of new Endpoint_ClearIN(), Endpoint_ClearOUT(), + * Pipe_ClearIN() and Pipe_ClearOUT() macros (done to allow for the detection of packets of zero length) + * - Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API + * - Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been + * renamed to Endpoint_ClearSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the + * Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe + * bank management API + * - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG) + * - Updated library Doxygen documentation, added groups, changed documentation macro functions to real functions for clarity + * - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity + * - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway + * - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream + * - Fixed CDC and USBtoSerial demos freezing where buffers were full while still transmitting or receiving (thanks to Peter Hand) + * - Removed "Host_" section of the function names in ConfigDescriptor.h, as most of the routines can now be used in device mode on the + * device descriptor + * - Renamed functions in the HID parser to have a "USB_" prefix and the acronym "HID" in the name + * - Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman) + * - Capitalized the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and + * DSearch_Comp_Return_ErrorCodes_t enums + * - Removed "ERROR" from the enum names in the endpoint and pipe stream error code enums + * - Renamed the USB_PowerOnErrorCodes_t enum to USB_InitErrorCodes_t, renamed the POWERON_ERROR_NoUSBModeSpecified enum value to + * USB_INITERROR_NoUSBModeSpecified + * - Renamed USB_PowerOnFail event to USB_InitFailure + * - Renamed OTG.h header functions to be more consistent with the rest of the library API + * - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander) + * - USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode + * rather than having the library pass only partially read header data to the application + * - The USB_UnhandledControlPacket event has had its parameters removed, in favor of accessing the new USB_ControlRequest structure + * - The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent + * - Fixed USB_RemoteWakeupEnabled flag never being set (the REMOTE WAKEUP Set Feature request was not being handled) + * - Renamed the FEATURELESS_CONTROL_ONLY_DEVICE compile-time token to CONTROL_ONLY_DEVICE + * - Endpoint configuration is now refined to give better output when all configurations have static inputs - removed the now useless + * STATIC_ENDPOINT_CONFIGURATION compile time token + * - Fixed SPI driver init function not clearing SPI2X bit when not needed + * - Fixed PREVENT ALLOW MEDIUM REMOVAL command issuing in the MassStorageHost demo using incorrect parameters (thanks to Mike Alex) + * - Fixed MassStorageHost demo broken due to an incorrect if statement test in MassStore_GetReturnedStatus() + * - Fixed reversed signature byte ordering in the CDC bootloader (thanks to Johannes Raschke) + * - Changed PIPE_CONTROLPIPE_DEFAULT_SIZE from 8 to 64 to try to prevent problems with faulty devices which do not respect the given + * wLength value when reading in the device descriptor + * - Fixed missing semicolon in the ATAVRUSBRF01 LED board driver code (thanks to Morten Lund) + * - Changed LED board driver code to define dummy LED masks for the first four board LEDs, so that user code can be compiled for boards + * with less than four LEDs without code modifications (thanks to Morten Lund) + * - Changed HWB board driver to Buttons driver, to allow for the support of future boards with more than one mounted GPIO button + * - Serial driver now correctly calculates the baud register value when in double speed mode + * - Init function of the Serial driver is now static inline to product smaller code for the common-case of static init values + * + * + * \section Sec_ChangeLog090401 Version 090401 + * + * - Fixed MagStripe project configuration descriptor containing an unused (blank) endpoint descriptor + * - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations + * - Fixed makefile EEPROM programming targets programming FLASH data in addition to EEPROM data + * - LUFA devices now enumerate correctly with LUFA hosts + * - Fixed Configuration Descriptor search routine freezing when a comparator returned a failure + * - Removed HID report item serial dump in the MouseHostWithParser and KeyboardHostWithParser - useful only for debugging, and + * slowed down the enumeration of HID devices too much + * - Increased the number of bits per track which can be read in the MagStripe project to 8192 when compiled for the AT90USBXXX6/7 + * - Fixed KeyboardMouse demo discarding the wIndex value in the REQ_GetReport request + * - USBtoSerial demo now discards all Rx data when not connected to a USB host, rather than buffering characters for transmission + * next time the device is attached to a host. + * - Added new F_USB compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any + * clock prescaling is performed) frequency, so that the PLL prescale mask can be determined + * - Changed stream wait timeout counter to be 16-bit, so that very long timeout periods can be set for correct communications with + * badly designed hosts or devices which greatly exceed the USB specification limits + * - Mass Storage Host demo now uses a USB_STREAM_TIMEOUT_MS of two seconds to maintain compatibility with poorly designed devices + * - Function attribute ATTR_ALWAYSINLINE renamed to ATTR_ALWAYS_INLINE to match other function attribute macro naming conventions + * - Added ATTR_ALWAYS_INLINE attribute to several key inlined library components, to ensure they are inlined in all circumstances + * - Removed SetSystemClockPrescaler() macro, the clock_prescale_set() avr-libc macro has been corrected in recent avr-libc versions + * - Fixed incorrect/missing control status stage transfers on demos, bootloaders and applications (thanks to Nate Lawson) + * - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded + * to also remove parts of the Get Status chapter 9 request to further reduce code usage + * - Makefile updated to include output giving the currently selected BOARD parameter value + * - Board Dataflash driver now allows for dataflash ICs which use different shifts for setting the current page/byte address (thanks + * to Kenneth Clubb) + * - Added DataflashManager_WriteBlocks_RAM() and DataflashManager_ReadBlocks_RAM() functions to the MassStorage demo, to allow for easy + * interfacing with a FAT library for dataflash file level access + * - Corrected CDC class bootloader to fix a few bugs, changed address counter to store x2 addresses for convenience + * - Fixed typos in the SPI driver SPI_SPEED_FCPU_DIV_64 and SPI_SPEED_FCPU_DIV_128 masks (thanks to Markus Zocholl) + * - Keyboard and Mouse device demos (normal, data interrupt and fully interrupt driven) combined into unified keyboard and mouse demos + * - Keyboard and Mouse host demos (normal and data interrupt driven) combined into unified keyboard and mouse demos + * - Removed AVRISP_Programmer project due to code quality concerns + * - Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incoming data + * - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg) + * - Fixed USBTask.h not conditionally including HostChapter9.h only when USB_CAN_BE_HOST is defined (thanks to Ian Gregg) + * - Fixed incorrect ADC driver init register manipulation (thanks to Tobias) + * - Added new GenericHID device demo application + * - Fixed Still Image Host SImage_SendData() function not clearing the pipe bank after sending data + * + * + * \section Sec_ChangeLog090209 Version 090209 + * + * - PWM timer mode in AudioOut demo changed to Fast PWM for speed + * - Updated Magstripe project to work with the latest hardware revision + * - Fixed library not responding to the BCERRI flag correctly in host mode, leading to device lockups + * - Fixed library handling Get Descriptor requests when not addressed as standard requests to the device or interface (thanks to + * Nate Lawson) + * - Fixed serious data corruption issue in MassStorage demo dataflash write routine + * - Added new NO_CLEARSET_FEATURE_REQUEST compile time token + * - USB task now restores previous global interrupt state after execution, rather than forcing global interrupts to be enabled + * - Fixed USB_DeviceEnumerationComplete event firing after each configuration change, rather than once after the initial configuration + * - Added ENDPOINT_DOUBLEBANK_SUPPORTED() macros to Endpoint.h, altered ENDPOINT_MAX_SIZE() to allow user to specify endpoint + * - ENDPOINT_MAX_ENDPOINTS changed to ENDPOINT_TOTAL_ENDPOINTS, PIPE_MAX_PIPES changed to PIPE_TOTAL_PIPES + * - Endpoint and Pipe non-control stream functions now ensure endpoint or pipe is ready before reading or writing + * - Changed Teensy bootloader to use a watchdog reset when exiting rather than a software jump + * - Fixed integer promotion error in MassStorage and MassStorageHost demos, corrupting read/write transfers + * - SPI_SendByte is now SPI_TransferByte, added new SPI_SendByte and SPI_ReceiveByte functions for fast one-way transfer + * - MassStorage demo changed to use new fast one-way SPI transfers to increase throughput + * - MassStorage handling of Mass Storage Reset class request improved + * - Altered MassStorage demo dataflash block read code for speed + * - Added USB_IsSuspended global flag + * - Simplified internal Dual Mode (OTG) USB library code to reduce code size + * - Extended stream timeout period to 100ms from 50ms + * - Mass Storage Host demo commands now all return an error code from the Pipe_Stream_RW_ErrorCodes_t enum + * - Added SubErrorCode parameter to the USB_DeviceEnumerationFailed event + * - VBUS drop interrupt now disabled during the manual-to-auto VBUS delivery handoff + * - Simplified low level backend so that device/host mode initialization uses the same code paths + * - Added workaround for faulty Mass Storage devices which do not implement the required GET_MAX_LUN request + * - Removed buggy Telnet application from the RNDIS demo + * - Moved Mass Storage class requests in the Mass Storage Host demo to wrapper functions in MassStoreCommands.c + * - Fixed incorrect SCSI command size value in the Request Sense command in MassStoreCommands.c + * - Added SetProtocol request to HID class non-parser Mouse and Keyboard demos to force devices to use the correct Boot Protocol + * - Added new "dfu" and "flip" programming targets to project makefiles + * - HID_PARSE_Sucessful enum member typo corrected to HID_PARSE_Successful + * - Changed COLLECTION item structures in the HID descriptor parser to include the collection's Usage Page value + * - Serial driver now sets Tx line as output, enables pull-up on Rx line + * - Fixed smaller USB AVRs raising multiple connection and disconnection events when NO_LIMITED_CONTROLLER_CONNECT is disabled + * - Added HOST_DEVICE_SETTLE_DELAY_MS to give the host delay after a device is connected before it is enumerated + * - Fixed KeyboardHostWithParser demo linking against the wrong global variables + * - Completed doxygen documentation of remaining library bootloaders, demos and projects + * - Fixed incorrect bootloader start address in the TeensyHID bootloader + * - Added HWB button whole-disk ASCII dump functionality to MassStoreHost demo + * - Replaced printf_P(PSTR("%c"), {Variable}) calls with putchar(<Variable>) for speed and size savings + * - Serial driver now accepts baud rates over 16-bits in size, added double speed flag option + * - Fixed incorrect callback abort return value in Pipe.c + * - Added new flip-ee and dfu-ee makefile targets (courtesy of Opendous Inc.) + * - Removed reboot-on-disconnect code from the TeensyHID bootloader, caused problems on some systems + * - Fixed AudioOutput and AudioInput demos looping on the endpoint data, rather than processing a sample at a time and returning + * each time the task runs to allow for other tasks to execute + * - Added support for the Atmel ATAVRUSBRF01 board + * - Added AVRISP Programmer Project, courtesy of Opendous Inc. + * - Fixed CDC Host demo not searching through both CDC interfaces for endpoints + * - Fixed incorrect Product String descriptor length in the DFU class bootloader + * + * + * \section Sec_ChangeLog081224 Version 081224 + * + * - MyUSB name changed to LUFA, the Lightweight USB Framework for AVRs + * - Fixed Mass Storage Host demo's MassStore_SendCommand() delay in the incorrect place + * - Fixed USBtoSerial demo not calling ReconfigureUSART() after a change in the line encoding + * - Fixed infinite loop in host mode Host-to-Device control transfers with data stages + * - HID report parser now supports devices with multiple reports in one interface via Report IDs + * - Fixed RZUSBSTICK board LED driver header incorrect macro definition order causing compile errors + * - Calling USB_Init() when the USB interface is already configured now forces a complete interface reset + * and re-enumeration - fixes MyUSB DFU bootloader not switching to app code correctly when soft reset used + * - Fixed "No newline at end of file" warning when stream callbacks are enabled + * - DFU bootloader now uses fixed signature bytes per device, rather than reading them out dynamically for size + * - Added new FIXED_CONTROL_ENDPOINT_SIZE and USE_SINGLE_DEVICE_CONFIGURATION switches to statically define certain values to + * reduce compiled binary size + * - Added new NO_LIMITED_CONTROLLER_CONNECT switch to prevent the library from trying to determine bus connection + * state from the suspension and wake up events on the smaller USB AVRs + * - Added summary of all library compile time tokens to the documentation + * - Added overview of the LUFA scheduler to the documentation + * - Removed MANUAL_PLL_CONTROL compile time token, replaced with a mask for the USB_Init() Options parameter + * - CDC bootloader now uses the correct non-far or far versions of the pgm_* functions depending on if RAMPZ is defined + * - Doxygen documentation now contains documentation on all the projects, bootloaders and most demos included with the library + * - CDC bootloader now runs user application when USB disconnected rather than waiting for a hard reset + * - MouseHostWithParser and KeyboardHostWithParser now support multiple-report devices + * - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver + * - Fixed the DFU bootloader, no longer freezes up when certain files are programmed into an AVR, made reading/writing faster + * - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal + * right-handed system + * - Added stub code to the CDC and USBtoSerial demos showing how to read and set the RS-232 handshake lines - not currently used in + * the demos, but the example code and supporting defines are now in place + * - Interrupts are now disabled when processing a control request in device mode, to avoid exceeding the strict control request + * timing requirements. + * - All demos now use a central StatusUpdate() function rather than direct calls to the board LED functions, so that the demos can + * easily be altered to show different LED combinations (or do something else entirely) as the demo's status changes + * - Removed LED commands from the CDC bootloader, unused by most AVR910 programming software + * - Fixed RNDIS demo ICMP ping requests echoing back incorrect data + * - Added DHCP server code to RNDIS demo, allowing for hands-free auto configuration on any PC + * - Fixed DFU bootloader PID value for the ATMEGA16U4 AVR + * - Endpoint and Pipe configuration functions now return an error code indicating success or failure + * - USB Reset in device mode now resets and disables all device endpoints + * - Added intermediate states to the host mode state machine, reducing the USB task blocking time to no more than 1ms explicitly per + * invocation when in host mode + * - Added support for the ATMEGA32U6 microcontroller + * - Added STATIC_ENDPOINT_CONFIGURATION compile time option, enabled in the bootloaders to minimize space usage + * - Removed redundant code from the USB device GetStatus() chapter 9 processing routine + * - Added new TeensyHID bootloader, compatible with the Teensy HID protocol (http://www.pjrc.com/teensy/) + * - Versions are now numbered by release dates, rather than arbitrary major/minor revision numbers + * - USB_RemoteWakeupEnabled is now correctly set and cleared by SetFeature and ClearFeature requests from the host + * - Changed prototype of GetDescriptor, so that it now returns the descriptor size (or zero if the descriptor doesn't exist) + * rather than passing the size back to the caller through a parameter and returning a boolean + * + * + * \section Sec_ChangeLog153 Version 1.5.3 (081002) + * + * - Fixed CDC bootloader using pgmspace macros for some descriptors inappropriately + * - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS) + * - Renamed bootloader directories to remove spaces, which were causing build problems on several OSes + * - Removed serial number strings from all but the MassStore demo where it is required - users were not + * modifying the code to either omit the descriptor or use a unique serial per device causing problems + * when multiple units of the same device were plugged in at the same time + * - AudioOutput and AudioInput demos now correctly silence endpoints when not enabled by the host + * - Added KeyboardMouse demo (Keyboard and Mouse functionality combined into a single demo) + * - Added DriverStubs directory to house board level driver templates, to make MyUSB compatible custom board + * driver creation easier + * - Extended MassStorage demo to support multiple LUNs, 2 by default + * - Fixed incorrect device address mask, preventing the device from enumerating with addresses larger than 63 + * - Fixed incorrect data direction mask in the GetStatus standard request, preventing it from being handled + * - Fixed incorrect GetStatus standard request for endpoints, now returns the endpoint STALL status correctly + * - Added in new USB_RemoteWakeupEnabled and USB_CurrentlySelfPowered flags rather than using fixed values + * - Added DualCDC demo to demonstrate the use of Interface Association Descriptors + * - Added pipe NAK detection and clearing API + * - Added pipe status change (NAK, STALL, etc.) interrupt API + * - Fixed MassStorageHost demo so that it no longer freezes randomly when issuing several commands in a row + * - Host demos configuration descriptor routines now return a unique error code when the returned data does + * not have a valid configuration descriptor header + * - Added Endpoint_WaitUntilReady() and Pipe_WaitUntilReady() functions + * - Stream functions now have software timeouts, timeout period can be set by the USB_STREAM_TIMEOUT_MS token + * - All demos now pass the USB.org automated Chapter 9 device compliance tests + * - All HID demos now pass the USB.org automated HID compliance tests + * - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems + * - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks + * - Mass Storage demo Dataflash management routines changed to use the endpoint stream functions + * - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file + * - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes + * are reflected in the hardware (change was previously lost) + * + * + * \section Sec_ChangeLog152 Version 1.5.2 (080731) + * + * - Fixed SwapEndian_32() function in Common.h so that it now works correctly (wrong parameter types) + * - Updated RNDIS demo - notification endpoint is no longer blocking so that it works with faulty Linux RNDIS + * implementations (where the notification endpoint is ignored in favor of polling the control endpoint) + * - Fixed incorrect Vendor Description string return size in RNDIS demo for the OID_GEN_VENDOR_DESCRIPTION OID token + * - Added very basic TCP/IP stack and HTTP/TELNET servers to RNDIS demo + * - Fixed DFU bootloader exit causing programming software to complain about failed writes + * - Fixed DFU bootloader EEPROM programming mode wiping first flash page + * - Fixed Clear/Set Feature device standard request processing code (fixing MassStorage demo in the process) + * - Added support for the ATMEGA16U4 AVR microcontroller + * - Library license changed from LGPLv3 to MIT license + * + * + * \section Sec_ChangeLog151 Version 1.5.1 (080707) + * + * - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event + * rather than the USB_DeviceAttached event + * - HID Usage Stack now forcefully cleared after an IN/OUT/FEATURE item has been completely processed to remove + * any referenced but not created usages + * - Changed USB_INT_DisableAllInterrupts() and USB_INT_ClearAllInterrupts(), USB_Host_GetNextDescriptorOfType(), + * USB_Host_GetNextDescriptorOfTypeBefore(), USB_Host_GetNextDescriptorOfTypeAfter() to normal functions (from inline) + * - Fixed USBtoSerial demo not sending data, only receiving + * - Fixed main makefile to make all by default, fixed MagStripe directory case to prevent case-sensitive path problems + * - ConfigDescriptor functions made normal, instead of static inline + * - Pipe/Endpoint *_Ignore_* functions changed to *_Discard_*, old names still present as aliases + * - Fixed ENDPOINT_MAX_SIZE define to be correct on limited USB controller AVRs + * - Changed endpoint and pipe size translation routines to use previous IF/ELSE IF cascade code, new algorithmic + * approach was buggy and caused problems + * - Bootloaders now compile with -fno-inline-small-functions option to reduce code size + * - Audio demos now use correct endpoint sizes for full and limited controller USB AVRs, double banking in all cases + * to be in line with the specification (isochronous endpoints MUST be double banked) + * - Added Interface Association descriptor to StdDescriptors.h, based on the relevant USB2.0 ECN + * - Fixed MIDI demo, corrected Audio Streaming descriptor to follow the MIDI-specific AS structure + * - Fixed HID class demo descriptors so that the HID interface's protocol is 0x00 (required for non-boot protocol HID + * devices) to prevent problems on hosts expecting the boot protocol functions to be supported + * - Added read/write control stream functions to Endpoint.h + * - Fixed AudioOut demo not setting port pins to inputs on USB disconnect properly + * - Added RNDISEthernet demo application + * + * + * \section Sec_ChangeLog150 Version 1.5.0 (080610) + * + * - Fixed MIDI demo, now correctly waits for the endpoint to be ready between multiple note messages + * - Added CDC Host demo application + * - Added KeyboardFullInt demo application + * - Endpoint and Pipe creation routines now mask endpoint/pipe size with the size mask, to remove transaction + * size bits not required for the routines (improves compatibility with devices) + * - Fixed AudioInput demo - now correctly sends sampled audio to the host PC + * - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes + * - Shrunk round-robin scheduler code slightly via the use of struct pointers rather than array indexes + * - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser + * - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder + * - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler + * - Added Still Image Host demo application + * - The USB device task now restores the previously selected endpoint, allowing control requests to be transparently + * handled via interrupts while other endpoints are serviced through polling + * - Fixed device signature being sent in reverse order in the CDC bootloader + * - Host demos now have a separate ConfigDescriptor.c/.h file for configuration descriptor processing + * - HostWithParser demos now have a separate HIDReport.c/.h file for HID report processing and dumping + * - Removed non-mandatory commands from MassStorage demo to save space, fixed SENSE ResponseCode value + * - CDC demos now send empty packets after sending a full one to prevent buffering issues on the host + * - Updated demo descriptors to use VID/PID values donated by Atmel + * - Added DoxyGen documentation to the source files + * - Fixed Serial_IsCharReceived() definition, was previously reversed + * - Removed separate USB_Descriptor_Language_t descriptor, USB_Descriptor_String_t is used instead + * - Removed unused Device Qualifier descriptor structure + * - Renamed the USB_CreateEndpoints event to the more appropriate USB_ConfigurationChanged + * - Fixed MassStorageHost demo reading in the block data in reverse + * - Removed outdated typedefs in StdRequestType.h, superseded by the macro masks + * - Corrected OTG.h is now included when the AVR supports both Host and Device modes, for creating OTG products + * - USB_DeviceEnumerationComplete event is now also fired when in device mode and the host has finished its enumeration + * - Interrupt driven demos now properly restore previously selected endpoint when ISR is complete + * - The value of USB_HOST_TIMEOUT_MS can now be overridden in the user project makefile to a custom fixed timeout value + * - Renamed USB_Host_SOFGeneration_* macros to more friendly USB_Host_SuspendBus(), USB_Host_ResumeBus() + * and USB_Host_IsBusSuspended() + * - Renamed *_*_Is* macros to *_Is* to make all flag checking macros consistent, Pipe_SetInterruptFreq() is now + * Pipe_SetInterruptPeriod() to use the correct terminology + * - UnicodeString member of USB_Descriptor_String_t struct changed to an ordinary int array type, so that the GCC + * Unicode strings (prefixed with an L before the opening quotation mark) can be used instead of explicit arrays + * of ASCII characters + * - Fixed Endpoint/Pipes being configured incorrectly if the maximum endpoint/pipe size for the selected USB AVR + * model was given as the bank size + * - HID device demos now use a true raw array for the HID report descriptor rather than a struct wrapped array + * - Added VERSION_BCD() macro, fixed reported HID and USB version numbers in demo descriptors + * - Cleaned up GetDescriptor device chapter 9 handler function + * - Added GET_REPORT class specific request to HID demos to make them complaint to the HID class + * - Cleaned up setting of USB_IsInitialized and USB_IsConnected values to only when needed + * - Removed Atomic.c and ISRMacro.h; the library was already only compatible with recent avr-lib-c for other reasons + * - All demos and library functions now use USB standardized names for the USB data (bRequest, wLength, etc.) + * - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names + * + * + * \section Sec_ChangeLog141 Version 1.4.1 (090519) + * + * - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo + * - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly + * - Corrected version number in Version.h + * + * + * \section Sec_ChangeLog140 Version 1.4.0 (090505) + * + * - Added HID Report Parser API to the library + * - Added Mouse and Keyboard host demo applications, using the new HID report parser engine + * - Added MouseFullInt demo, which demonstrates a fully interrupt (including control requests) mouse device + * - Fixed incorrect length value in the audio control descriptor of the AudioOutput and AudioInput demos + * - Added MIDI device demo application to the library + * - Fixed problem preventing USB devices from being resumed from a suspended state + * - Added new CDC class bootloader to the library, based on the AVR109 bootloader protocol + * - Added header to each demo application indicating the mode, class, subclass, standards used and supported speed + * - Functions expecting endpoint/pipe numbers are no longer automatically masked against ENDPOINT_EPNUM_MASK or + * PIPE_PIPENUM_MASK - this should be manually added to code which requires it + * - Fixed DFU class bootloader - corrected frequency of flash page writes, greatly reducing programming time + * - Renamed AVR_HOST_GetDeviceConfigDescriptor() to USB_Host_GetDeviceConfigDescriptor() and AVR_HOST_GetNextDescriptor() + * to USB_Host_GetNextDescriptor() + * - Added new USB_Host_GetNextDescriptorOfTypeBefore() and USB_Host_GetNextDescriptorOfTypeAfter() routines + * - Moved configuration descriptor routines to MyUSB/Drivers/USB/Class/, new accompanying ConfigDescriptors.c file + * - Added new configuration descriptor comparator API for more powerful descriptor parsing, updated host demos to use the + * new comparator API + * - Fixed MassStorageHost demo capacity printout, and changed data read/write mode from little-endian to the correct + * big-endian for SCSI devices + * - Fixed macro/function naming consistency; USB_HOST is now USB_Host, USB_DEV is now USB_Device + * - Added better error reporting to host demos + * - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls + * + * + * \section Sec_ChangeLog132 Version 1.3.2 (080401) + * + * - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes + * are reflected in the hardware + * - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the + * GetLineCoding request had an incorrect RequestType mask preventing it from being processed + * - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full + * - Device control endpoint size is now determined from the device's descriptors rather than being fixed + * - Separated out SPI code into new SPI driver in AT90USBXXX driver directory + * - Bootloader now returns correct PID for the selected USB AVR model, not just the AT90USB128X PID + * - Added support for the RZUSBSTICK board + * - Bicolour driver removed in favor of generic LEDs driver + * - Added support for the ATMEGA32U4 AVR + * - Added MANUAL_PLL_CONTROL compile time option to prevent the USB library from manipulating the PLL + * + * + * \section Sec_ChangeLog131 Version 1.3.1 (080319) + * + * - Fixed USB to Serial demo - class value in the descriptors was incorrect + * - Control endpoint size changed from 64 bytes to 8 bytes to save on USB FIFO RAM and to allow low + * speed mode devices to enumerate properly + * - USB to Serial demo data endpoints changed to dual-banked 16 byte to allow the demo to work + * on USB AVRs with limited USB FIFO RAM + * - Changed demo endpoint numbers to use endpoints 3 and 4 for double banking, to allow limited + * USB device controller AVRs (AT90USB162, AT90USB82) to function correctly + * - Updated Audio Out demo to use timer 1 for AVRs lacking a timer 3 for the PWM output + * - Fixed incorrect USB_DEV_OPT_HIGHSPEED entry in the Mass Storage device demo makefile + * - Optimized Mass Storage demo for a little extra transfer speed + * - Added LED indicators to the Keyboard demo for Caps Lock, Num Lock and Scroll Lock + * - Added Endpoint_Read_Stream, Endpoint_Write_Stream, Pipe_Read_Stream and Pipe_Write_Stream functions + * (including Big and Little Endian variants) + * - Made Dataflash functions inline for speed, removed now empty Dataflash.c driver file + * - Added new SetSystemClockPrescaler() macro (thanks to Joerg Wunsch) + * - Fixed Endpoint_ClearStall() to function correctly on full USB controller AVRs (AT90USBXXX6/7) + * - Endpoint_Setup_In_Clear() and Endpoint_Setup_Out_Clear() no longer set FIFOCON, in line with the + * directives in the datasheet + * - Fixed PLL prescaler defines for all AVR models and frequencies + * - Fixed ENDPOINT_INT_IN and ENDPOINT_INT_OUT definitions + * - Added interrupt driven keyboard and mouse device demos + * - Combined USB_Device_ClearFeature and USB_Device_SetFeature requests into a single routine for code + * size savings + * - Added missing Pipe_GetCurrentPipe() macro to Pipe.h + * + * + * \section Sec_ChangeLog130 Version 1.3.0 (080307) + * + * - Unnecessary control endpoint config removed from device mode + * - Fixed device standard request interpreter accidentally processing some class-specific requests + * - Added USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS compile time options to instruct the library + * to use descriptors stored in RAM or EEPROM rather than flash memory + * - All demos now disable watchdog on startup, in case it has been enabled by fuses or the bootloader + * - USB_DEV_OPT_LOWSPEED option now works correctly + * - Added ability to set the USB options statically for a binary size reduction via the USE_STATIC_OPTIONS + * compile time define + * - USB_Init no longer takes a Mode parameter if compiled for a USB device with no host mode option, or + * if forced to a particular mode via the USB_HOST_ONLY or USB_DEVICE_ONLY compile time options + * - USB_Init no longer takes an Options parameter if options statically configured by USE_STATIC_OPTIONS + * - Endpoint_Ignore_* and Pipe_Ignore_* made smaller by making the dummy variable non-volatile so that the + * compiler can throw away the result more efficiently + * - Added in an optional GroupID value to each scheduler entry, so that groups of tasks can once again be + * controlled by the new Scheduler_SetGroupTaskMode() routine + * - Added support for AT90USB162 and AT90USB82 AVR models + * - Added support for the STK525 and STK526 boards + * - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and + * placing board drivers in {Application Directory}/Board/ + * - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power + * - Joystick defines are now in sync with the schematics - orientation will be rotated for the USBKEY + * - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register + * - Fixed data transfers to devices when in host mode + * - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to + * USB_HOST_IsDeviceFullSpeed() to be in line with the official USB speed names (to avoid confusion with + * the real high speed mode, which is unavailable on the USB AVRs) + * + * + * \section Sec_ChangeLog120 Version 1.2.0 (080204) + * + * - Added USB_DeviceEnumerationComplete event for host mode + * - Added new Scheduler_Init routine to prepare the scheduler, so that tasks can be started and + * stopped before the scheduler has been started (via Scheduler_Start) + * - Connection events in both Device and Host mode are now interrupt-driven, allowing the USB management + * task to be stopped when the USB is not connected to a host or device + * - All demos updated to stop the USB task when not in use via the appropriate USB events + * - Mass Storage Host demo application updated to function correctly with all USB flash disks + * - Mass Storage Host demo application now prints out the capacity and number of LUNs in the attached + * device, and prints the first block as hexadecimal numbers rather than ASCII characters + * - Endpoint and Pipe clearing routines now clear the Endpoint/Pipe interrupt and status flags + * - Shifted error handling code in the host enum state machine to a single block, to reduce code complexity + * - Added in DESCRIPTOR_TYPE, DESCRIPTOR_SIZE and DESCRIPTOR_CAST macros to make config descriptor processing + * clearer in USB hosts and DESCRIPTOR_ADDRESS for convenience in USB devices + * - Added in alloca macro to common.h, in case the user is using an old version of avr-lib-c missing the macro + * + * + * \section Sec_ChangeLog110 Version 1.1.0 (080125) + * + * - Fixed DCONNI interrupt being enabled accidentally after a USB reset + * - Fixed DDISCI interrupt not being disabled when a device is not connected + * - Added workaround for powerless pull-up devices causing false disconnect interrupts + * - Added USB_DeviceEnumerationFailed event for Host mode + * - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer + * pointer is passed + * - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables + * dependent on size of memory parameters passed in via the user project's makefile + * - Fixed incorrect device reset routine being called in USBTask + * - Devices which do not connect within the standard 300mS are now supported + * - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being + * started/stopped, as well as USB_InitTaskPointer(), which was breaking dual device/host USB projects + * - Changed scheduler to use the task name rather than IDs for setting the task mode, eliminating the + * need to have a task ID list + * - ID transition interrupt now raises the appropriate device/host disconnect event if device attached + * - Fixed double VBUS change (and VBUS -) event when detaching in device mode + * - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile + * - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and + * Endpoint_IsConfigured() after calling the config functions to determine success + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/CompileTimeTokens.txt b/lib/lufa/LUFA/DoxygenPages/CompileTimeTokens.txt new file mode 100644 index 0000000000..92adf0dccf --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/CompileTimeTokens.txt @@ -0,0 +1,223 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_TokenSummary Summary of Compile Tokens + * + * The following lists all the possible tokens which can be defined in a project makefile, and passed to the + * compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour, + * or remove features unused by a given application in order to save flash space. + * + * \note If the \c USE_LUFA_CONFIG_HEADER token is defined, the library will include a header file named \c LUFAConfig.h located + * in the user directory where the below compile time tokens may be defined. This allows for an alternative to makefile + * defined tokens for configuring the library. + * + * \section Sec_TokenSummary_NonUSBTokens Non USB Related Tokens + * This section describes compile tokens which affect non-USB sections of the LUFA library. + * + * \li <b>DISABLE_TERMINAL_CODES</b> - (\ref Group_Terminal) - <i>All Architectures</i> \n + * If an application contains ANSI terminal control codes listed in TerminalCodes.h, it might be desired to remove them + * at compile time for use with a terminal which is non-ANSI control code aware, without modifying the source code. If + * this token is defined, all ANSI control codes in the application code from the TerminalCodes.h header are removed from + * the source code at compile time. + * + * + * \section Sec_TokenSummary_USBClassTokens USB Class Driver Related Tokens + * This section describes compile tokens which affect USB class-specific drivers in the LUFA library. + * + * \li <b>HID_HOST_BOOT_PROTOCOL_ONLY</b> - (\ref Group_USBClassHIDHost) - <i>All Architectures</i> \n + * By default, the USB HID Host class driver is designed to work with HID devices using either the Boot or Report HID + * communication protocols. On devices where the Report protocol is not used (i.e. in applications where only basic + * Mouse or Keyboard operation is desired, using boot compatible devices), the code responsible for the Report protocol + * mode can be removed to save space in the compiled application by defining this token. When defined, it is still necessary + * to explicitly put the attached device into Boot protocol mode via a call to \ref HID_Host_SetBootProtocol(). + * + * \li <b>HID_STATETABLE_STACK_DEPTH</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This + * allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous + * state table in a compact manner. This token may be defined to a non-zero 8-bit value to give the maximum depth of the state + * table stack. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * \li <b>HID_USAGE_STACK_DEPTH</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession + * when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with + * different usages in a compact manner. This token may be defined to a non-zero 8-bit value to set the maximum depth of the + * usage stack, indicating the maximum number of USAGE items which can be stored temporarily until the next INPUT, OUTPUT + * and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * \li <b>HID_MAX_COLLECTIONS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information + * is stored separately in the processed usage structure (and referred to by the data elements in the structure) to save space. + * This token may be defined to a non-zero 8-bit value to set the maximum number of COLLECTION items which can be processed by the + * parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file + * documentation. + * + * \li <b>HID_MAX_REPORTITEMS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID + * device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which + * the report data should be interpreted by the host. This token may be defined to a non-zero 8-bit value to set the maximum number of + * data elements which can be stored in the processed HID report structure, including INPUT, OUTPUT and (if enabled) FEATURE items. + * If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed separately in the + * processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * \li <b>HID_MAX_REPORT_IDS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * HID reports may contain several report IDs, to logically distinguish grouped device data from one another - for example, a combination + * keyboard and mouse might use report IDs to separate the keyboard reports from the mouse reports. In order to determine the size of each + * report, and thus know how many bytes must be read or written, the size of each report (IN, OUT and FEATURE) must be calculated and + * stored. This token may be defined to a non-zero 8-bit value to set the maximum number of report IDs in a device which can be processed + * and their sizes calculated/stored into the resultant processed report structure. If not defined, this defaults to the value indicated in + * the HID.h file documentation. + * + * \li <b>NO_CLASS_DRIVER_AUTOFLUSH</b> - (\ref Group_USBClassDrivers) - <i>All Architectures</i> \n + * Many of the device and host mode class drivers automatically flush any data waiting to be written to an interface, when the corresponding + * USB management task is executed. This is usually desirable to ensure that any queued data is sent as soon as possible once and new data is + * constructed in the main program loop. However, if flushing is to be controlled manually by the user application via the *_Flush() commands, + * the compile time token may be defined in the application's makefile to disable automatic flushing during calls to the class driver USB + * management tasks. + * + * + * \section Sec_TokenSummary_USBTokens General USB Driver Related Tokens + * This section describes compile tokens which affect USB driver stack as a whole in the LUFA library. + * + * \li <b>ORDERED_EP_CONFIG</b> - (\ref Group_EndpointManagement , \ref Group_PipeManagement) - <i>AVR8, UC3</i> \n + * The USB AVRs do not allow for Endpoints and Pipes to be configured out of order; they <i>must</i> be configured in an ascending order to + * prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialization. This compile + * time token may be used to restrict the initialization order to ascending indexes only in exchange for a smaller compiled binary size. Use + * caution when applied to applications using the library USB Class drivers; the user application must ensure that all endpoints and pipes are + * allocated sequentially. + * + * \li <b>USE_STATIC_OPTIONS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad + * voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options + * mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing + * the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an + * Options parameter. + * + * \li <b>USB_DEVICE_ONLY</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the + * mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to + * save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which + * do not support host mode. + * + * \li <b>USB_HOST_ONLY</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models. + * + * \li <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host + * must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout + * period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead. + * + * \li <b>NO_LIMITED_CONTROLLER_CONNECT</b> - (\ref Group_Events) - <i>AVR8 Only</i> \n + * On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of + * VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be + * slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is + * required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the \ref USB_DeviceState global + * can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the user application. + * When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events. + * + * \li <b>NO_SOF_EVENTS</b> - (\ref Group_Events) - <i>All Architectures</i> \n + * By default, there exists a LUFA application event for the start of each USB frame while the USB bus is not suspended in either host or device mode. + * This event can be selectively enabled or disabled by calling the appropriate device or host mode function. When this compile time token is defined, + * the ability to receive USB Start of Frame events via the \ref EVENT_USB_Device_StartOfFrame() or \ref EVENT_USB_Host_StartOfFrame() events is removed, + * reducing the compiled program's binary size. + * + * + * \section Sec_TokenSummary_USBDeviceTokens USB Device Mode Driver Related Tokens + * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Device mode. + * + * \li <b>USE_RAM_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n + * Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one + * of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime. + * + * \li <b>USE_FLASH_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n + * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's FLASH memory rather than RAM. + * + * \li <b>USE_EEPROM_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n + * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's EEPROM memory rather than RAM. + * + * \li <b>NO_INTERNAL_SERIAL</b> - (\ref Group_StdDescriptors) - <i>All Architectures</i> \n + * Some AVR models contain a unique serial number which can be used as the device serial number, while in device mode. This allows + * the host to uniquely identify the device regardless of if it is moved between USB ports on the same computer, allowing allocated + * resources (such as drivers, COM Port number allocations) to be preserved. This is not needed in many apps, and so the code that + * performs this task can be disabled by defining this option and passing it to the compiler via the -D switch. + * + * \li <b>FIXED_CONTROL_ENDPOINT_SIZE</b>=<i>x</i> - (\ref Group_EndpointManagement) - <i>All Architectures</i> \n + * By default, the library determines the size of the control endpoint (when in device mode) by reading the device descriptor. + * Normally this reduces the amount of configuration required for the library, allows the value to change dynamically (if + * descriptors are stored in EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this token can be + * defined to a non-zero value instead to give the size in bytes of the control endpoint, to reduce the size of the compiled + * binary. + * + * \li <b>DEVICE_STATE_AS_GPIOR</b> - (\ref Group_Device) - <i>AVR8 Only</i> \n + * One of the most frequently used global variables in the stack is the USB_DeviceState global, which indicates the current state of + * the Device State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token + * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR + * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except + * implicitly via the library APIs. + * + * \li <b>FIXED_NUM_CONFIGURATIONS</b>=<i>x</i> - (\ref Group_Device) - <i>All Architectures</i> \n + * By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces + * the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in + * EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this value may be fixed via this token in the project + * makefile to reduce the compiled size of the binary at the expense of flexibility. + * + * \li <b>CONTROL_ONLY_DEVICE</b> - (\ref Group_Device) - <i>All Architectures</i> \n + * In some limited USB device applications, there are no device endpoints other than the control endpoint; i.e. all device communication + * is through control endpoint requests. Defining this token will remove several features related to the selection and control of device + * endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided. + * + * \li <b>MAX_ENDPOINT_INDEX</b> - (\ref Group_Device) - <i>XMEGA Only</i> \n + * Defining this value to the highest index (not address - this excludes the direction flag) endpoint within the device will restrict the + * number of FIFOs created internally for the endpoint buffers, reducing the total RAM usage. + * + * \li <b>INTERRUPT_CONTROL_ENDPOINT</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * Some applications prefer to not call the USB_USBTask() management task regularly while in device mode, as it can complicate code significantly. + * Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control + * endpoint entirely via USB controller interrupts asynchronously to the user application. When defined, USB_USBTask() does not need to be called + * when in USB device mode. + * + * \li <b>NO_DEVICE_REMOTE_WAKEUP</b> - (\ref Group_Device) - <i>All Architectures</i> \n + * Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices, + * the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch. + * + * \li <b>NO_DEVICE_SELF_POWER</b> - (\ref Group_Device) - <i>All Architectures</i> \n + * USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may + * query the device to determine the current power source, via \ref USB_Device_CurrentlySelfPowered. For solely bus powered devices, this global + * and the code required to manage it may be disabled by passing this token to the library via the -D switch. + * + * + * \section Sec_TokenSummary_USBHostTokens USB Host Mode Driver Related Tokens + * + * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Host mode. + * + * \li <b>HOST_STATE_AS_GPIOR</b> - (\ref Group_Host) - <i>AVR8 Only</i> \n + * One of the most frequently used global variables in the stack is the USB_HostState global, which indicates the current state of + * the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token + * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR + * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except + * implicitly via the library APIs. + * + * \li <b>USB_HOST_TIMEOUT_MS</b>=<i>x</i> - (\ref Group_Host) - <i>All Architectures</i> \n + * When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached + * device fails to respond within the timeout period. This token may be defined to a non-zero 16-bit value to set the timeout period for + * control transfers, specified in milliseconds. If not defined, the default value specified in Host.h is used instead. + * + * \li <b>HOST_DEVICE_SETTLE_DELAY_MS</b>=<i>x</i> - (\ref Group_Host) - <i>All Architectures</i> \n + * Some devices require a delay of up to 5 seconds after they are connected to VBUS before the enumeration process can be started, or + * they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled + * back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device + * settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead. + * + * \li <b>INVERTED_VBUS_ENABLE_LINE</b> - (\ref Group_Host) - <i>All Architectures</i> \n + * If enabled, this will indicate that the USB target VBUS line polarity is inverted; i.e. it should be pulled low to enable VBUS to the + * target, and pulled high to stop the target VBUS generation. + * \n + * \attention On AVR8 architecture devices, this compile time option requires \c NO_AUTO_VBUS_MANAGEMENT to be set. + * + * \li <b>NO_AUTO_VBUS_MANAGEMENT</b> - (\ref Group_Host) - <i>All Architectures</i> \n + * Disables the automatic management of VBUS to the target, i.e. automatic shut down in the even of an overcurrent situation. When enabled, VBUS + * is enabled while the USB controller is initialized in USB Host mode. + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/CompilingApps.txt b/lib/lufa/LUFA/DoxygenPages/CompilingApps.txt new file mode 100644 index 0000000000..08f81d2ba2 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/CompilingApps.txt @@ -0,0 +1,46 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_CompilingApps Compiling the Demos, Bootloaders and Projects + * + * The following details how to compile the included LUFA demos, applications and bootloaders using AVR-GCC. + * + * \section Sec_CompilingApps_Prerequisites Prerequisites + * Before you can compile any of the LUFA library code or demos, you will need a recent distribution of avr-libc (1.6.2+) + * and the AVR-GCC (4.2+) compiler. A standard "coreutils" package for your system is also required for command line + * compilation of LUFA based applications. + * + * \subsection SSec_CompilingApps_PreqWindows Windows Prerequisites + * On Windows, you will need a copy of the latest Atmel Toolchain (<a>http://www.atmel.com/tools/ATMELAVRTOOLCHAINFORWINDOWS.aspx</a>), + * either downloaded and installed as a standalone package, or installed as part of Atmel Studio. You will need to ensure + * that the "bin" directory of the toolchain is available in your system's <b>PATH</b> environment variable. + * + * In addition, you will need to install a ported version of the ZSH or BASH *nix shells, and a standard set of *nix + * utilities such as <i>cut</i>, <i>find</i> and <i>sed</i>. These can be found in the "basic" system package of the + * of the MinGW installer (<a>http://www.mingw.org</a>). Once installed, add the "msys\1.0\bin" of the MinGW installation + * folder is added to your system's <b>PATH</b> environment variable. + * + * \subsection SSec_CompilingApps_PreqLinux Linux Prerequisites + * On Linux systems you will need to install the latest Linux distribution of the standalone Atmel Toolchain from the + * Atmel website (<a>http://www.atmel.com/tools/ATMELAVRTOOLCHAINFORLINUX.aspx</a>), or use the latest avr-libc and avr-gcc packages + * for your chosen distribution's package manager. For full device support, the Atmel standalone Toolchain package is recommended. + * + * \section Sec_CompilingApps_Compiling Compiling a LUFA Application + * Compiling the LUFA demos, applications and/or bootloaders is very simple. LUFA comes with makefile scripts for + * each individual demo, bootloader and project folder, as well as scripts in the Demos/, Bootloaders/, Projects/ + * and the LUFA root directory. Compilation of projects can be started from any of the above directories, with a build + * started from an upper directory in the directory structure executing build of all child directories under it. This + * means that while a build inside a particular demo directory will build only that particular demo, a build started from + * the /Demos/ directory will build all LUFA demo projects sequentially. + * + * To build a project from the source via the command line, the command <b>"make all"</b> should be executed from the command + * line in the directory of interest. To remove compiled files (including the binary output, all intermediately files and all + * diagnostic output files), execute <b>"make clean"</b>. Once a "make all" has been run and no errors were encountered, the + * resulting binary will be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM + * variables, the generated ".EEP" file will contain the project's EEPROM data. + * + * \see \ref Page_BuildSystem for information on the LUFA build system. + */ diff --git a/lib/lufa/LUFA/DoxygenPages/ConfiguringApps.txt b/lib/lufa/LUFA/DoxygenPages/ConfiguringApps.txt new file mode 100644 index 0000000000..15b660e927 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/ConfiguringApps.txt @@ -0,0 +1,157 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects + * + * If the target microcontroller model, architecture, clock speed, board or other settings are different from the current + * settings, they must be changed and the project recompiled from the source code before being programmed into the microcontroller. + * Most project configuration options are located in the <tt>makefile</tt> build script inside each LUFA application's folder, + * however some demo or application-specific configuration settings are located in one or more of the source files of the project. + * See each project's individual documentation for application-specific configuration values. + * + * Each project "makefile" contains all the script and configuration data required to compile each project. When opened with + * any regular basic text editor such as Notepad or WordPad (ensure that the save format is a pure ASCII text format) the + * build configuration settings may be altered. + * + * \see \ref Page_BuildSystem for information on the LUFA build system. + * + * \section Sec_ConfiguringApps_AppMakefileParams The Default Application Makefile Template + * + * Below is a copy of the default LUFA application makefile, which can be used as a template for each application. + * + * \verbinclude makefile_template + * + * Inside each makefile, a number of configuration variables are listed with the syntax "<VARIABLE NAME> = <VALUE>". For + * each application, the important standard variables which should be altered are: + * + * - <b>MCU</b>, the target processor model + * - <b>ARCH</b>, the target microcontroller architecture + * - <b>BOARD</b>, the target board hardware + * - <b>F_CPU</b>, the target CPU master clock frequency, after any prescaling + * - <b>F_USB</b>, the target raw input clock to the USB module of the processor + * - <b>OPTIMIZATION</b>, the level of optimization to compile with + * - <b>TARGET</b>, the name of the target output binary and other files + * - <b>SRC</b>, the list of source files to compile/assemble/link + * - <b>LUFA_PATH</b>, the path to the LUFA library core source code + * - <b>CC_FLAGS</b>, the common command line flags to pass to the C/C++ compiler, assembler and linker + * - <b>LD_FLAGS</b>, the command line flags to pass to the linker + * + * These values should be changed to reflect the build hardware. + * + * \subsection SSec_ConfiguringApps_MCU The MCU Parameter + * This parameter indicates the target microcontroller model for the compiled application. This should be set to the model of the target + * microcontroller (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the + * microcontroller models and architectures, as they may make use of peripherals or modes only present in some devices. + * + * For supported processor models, see \ref Page_DeviceSupport. + * + * \subsection SSec_ConfiguringApps_ARCH The ARCH Parameter + * This parameter indicates the target microcontroller architecture the library is to be compiled for. Different microcontroller + * architectures require different source files to be compiled into the final binary, and so this option must be set to the correct + * architecture for the selected platform. + * + * For supported processor architectures, see \ref Page_DeviceSupport. + * + * \subsection SSec_ConfiguringApps_BOARD The BOARD Parameter + * This parameter indicates the target board hardware for the compiled application. Some LUFA library drivers are board-specific, + * such as the LED driver, and the library needs to know the layout of the target board. If you are using one of the board models listed + * on the main library page, change this parameter to the board name in all UPPER-case. + * + * If you are not using any board-specific drivers in the LUFA library, or you are using a custom board layout, change this to read + * "USER" (no quotes) instead of a standard board name. If the USER board type is selected and the application makes use of one or more + * board-specific hardware drivers inside the LUFA library, then the appropriate stub drives files should be copied from the \c /CodeTemplates/DriverStubs/ + * directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the + * custom board's hardware. + * + * For boards with built in hardware driver support within the LUFA library, see \ref Page_DeviceSupport. + * + * \subsection SSec_ConfiguringApps_F_CPU The F_CPU Parameter + * This parameter indicates the target microcontroller's main CPU clock frequency, in Hz. This is used by many libraries (and applications) for + * timing related purposes, and should reflect the actual CPU speed after any prescaling or adjustments are performed. + * + * \subsection SSec_ConfiguringApps_F_USB The F_USB Parameter + * This parameter indicates the raw input clock frequency to the USB module within the microcontroller in Hz. This may be very different on some platforms + * to the main CPU clock or other peripheral/bus clocks. + * + * \note On AVR8 platforms, this must be equal to \c 8000000 or \c 16000000. + * + * \note On XMEGA platforms, this must be equal to a multiple of 6000000 from \c 6000000 to \c 48000000. + * + * \note On UC3 platforms, this must be equal to a multiple of 12000000 from \c 12000000 to \c 48000000. + * + * \subsection SSec_ConfiguringApps_OPTIMIZATION The OPTIMIZATION Parameter + * This parameter indicates the level of optimization to use when compiling the application. This will allow you to compile with an optimization level + * supported by GCC, from <tt>0</tt> (no optimization) to <tt>3</tt> (fastest runtime optimization) or <tt>s</tt> (smallest size). + * + * \subsection SSec_ConfiguringApps_TARGET The TARGET Parameter + * This parameter indicates the application target name, which is used as the base filename for the build binary and debugging files. This will be the + * name of the output files once linked together into the final application, ready to load into the target. + * + * \subsection SSec_ConfiguringApps_SRC The SRC Parameter + * This parameter indicates the source files used to compile the application, as a list of C (<tt>*.c</tt>), C++ (<tt>*.cpp</tt>) and Assembly (<tt>*.S</tt>) files. Note that + * all assembly files must end in a <b>capital</b> .S extension, as lowercase .s files are reserved for GCC intermediate files. + * + * \subsection SSec_ConfiguringApps_LUFA_PATH The LUFA_PATH Parameter + * As each LUFA program requires the LUFA library source code to compile correctly, the application must know where the LUFA library is located. This + * value specifies the path to the LUFA library core. This path may be relative or absolute, however note than even under Windows based systems the + * forward-slash (/) path separator must be used. + * + * \subsection SSec_ConfiguringApps_CC_FLAGS The CC_FLAGS Parameter + * This parameter lists the compiler flags passed to the C/C++ compiler, the assembler and the linker. These are used as-is directly to GCC and thus + * must match GCC's command line options as given in the GCC manual. This variable may be used to define tokens directly on the command line, enable or + * disable warnings, adjust the target-specific tuning parameters or other options. + * + * \subsection SSec_ConfiguringApps_LD_FLAGS The LD_FLAGS Parameter + * This parameter lists the linker flags passed exclusively to the linker. These are used as-is directly to GCC and thus must match GCC's command line + * linker options as given in the GCC manual. This variable may be used to create or relocate custom data sections, or enable linker specific behaviors. + * + * + * \section Sec_ExampleAppConfig Example Application Makefile Configurations + * Below is an example makefile for an AVR8 based AT90USB1287 running at 8MHz, to compile a program called "MyApplication": + * \verbatim + MCU = at90usb1287 + ARCH = AVR8 + BOARD = NONE + F_CPU = 8000000 + F_USB = $(F_CPU) + OPTIMIZATION = s + TARGET = MyApplication + SRC = MyApplication.c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) + LUFA_PATH = ../../../../LUFA + CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ + LD_FLAGS = + \endverbatim + * + * Below is an example makefile for an XMEGA based ATXMEGA128A1U running at 32MHz, to compile a program called "MyApplication": + * \verbatim + MCU = atxmega128a1u + ARCH = XMEGA + BOARD = NONE + F_CPU = 32000000 + F_USB = 48000000 + OPTIMIZATION = s + TARGET = MyApplication + SRC = MyApplication.c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) + LUFA_PATH = ../../../../LUFA + CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ + LD_FLAGS = + \endverbatim + * + * Below is an example makefile for a UC3 based AT32UC3A0512 running at 50MHz, to compile a program called "MyApplication": + * \verbatim + MCU = uc3a0512 + ARCH = UC3 + BOARD = NONE + F_CPU = 50000000 + F_USB = 48000000 + OPTIMIZATION = s + TARGET = MyApplication + SRC = MyApplication.c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) + LUFA_PATH = ../../../../LUFA + CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ + LD_FLAGS = + \endverbatim + */ diff --git a/lib/lufa/LUFA/DoxygenPages/DevelopingWithLUFA.txt b/lib/lufa/LUFA/DoxygenPages/DevelopingWithLUFA.txt new file mode 100644 index 0000000000..31b58fa2af --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/DevelopingWithLUFA.txt @@ -0,0 +1,23 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_DevelopingWithLUFA Developing With LUFA + * + * This section of the manual contains information on LUFA development, such as Getting Started information, + * information on compile-time tuning of the library and other developer-related sections. + * + * <b>Subsections:</b> + * \li \subpage Page_BuildSystem - The LUFA Buildsystem + * \li \subpage Page_TokenSummary - Summary of Compile Time Tokens + * \li \subpage Page_Migration - Migrating from an Older LUFA Version + * \li \subpage Page_VIDPID - Allocated USB VID and PID Values + * \li \subpage Page_OSDrivers - Operating System Driver Information + * \li \subpage Page_BuildLibrary - Building as a Linkable Library + * \li \subpage Page_WritingBoardDrivers - How to Write Custom Board Drivers + * \li \subpage Page_SoftwareBootloaderStart - How to jump to the bootloader in software + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/DeviceSupport.txt b/lib/lufa/LUFA/DoxygenPages/DeviceSupport.txt new file mode 100644 index 0000000000..cff2cda4b9 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/DeviceSupport.txt @@ -0,0 +1,424 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_DeviceSupport Device and Hardware Support + * + * <b>Atmel Microcontrollers:</b> + * \li \subpage Page_AVR8Support - Atmel AVR8 Support + * \li \subpage Page_UC3Support - Atmel AVR32 UC3 Support + * \li \subpage Page_XMEGASupport - Atmel XMEGA Support + */ + +/** + * \page Page_AVR8Support Atmel 8-Bit AVR (AVR8) Support + * + * \section Sec_AVR8Support_Devices Supported Microcontroller Models + * + * Currently supported AVR8 models: + * + * <table> + * <tr> + * <th width="150px">Part</th> + * <th width="150px">USB Device Mode</th> + * <th width="150px">USB Host Mode</th> + * </tr> + * <tr> + * <td>AT90USB82</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATMEGA8U2</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>AT90USB162</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATMEGA16U2</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATMEGA16U4</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATMEGA32U2</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATMEGA32U4</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>AT90USB646</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>AT90USB647</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT90USB1286</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>AT90USB1287</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * </table> + * + * \section Sec_AVR8Support_Boards Supported Atmel Boards + * Currently supported Atmel AVR8 boards (see \ref Group_BoardTypes): + * - AT90USBKEY + * - ATAVRUSBRF01 + * - EVK527 + * - RZUSBSTICK + * - STK525 + * - STK526 + * - XPLAIN (Original green board, <i>not</i> the newer blue XPLAINED family boards) + * - Xplained-MINI + * + * \section Sec_AVR8Support_ThirdParty Supported Third Party Boards + * Currently supported third-party boards (see \ref Group_BoardTypes for makefile \c BOARD constant names): + * - Adafruit U4 Breakout Board + * - Arduino Leonardo + * - Arduino Micro + * - Arduino Uno + * - Arduino Yun + * - Bitwizard Multio and Big-Multio + * - Busware BUI + * - Busware CUL V3 + * - Busware TUL + * - DorkbotPDX Duce + * - Fletchtronics Bumble-B (using manufacturer recommended peripheral layout) + * - Kernel Concepts USBFOO + * - Linnix UDIP + * - MattairTech JM-DB-U2 + * - Maximus USB + * - Micropendous Boards (Micropendous-32U2, Micropendous-1, Micropendous-2) + * - Microsin AVR-USB162 + * - Minimus USB + * - Olimex AVR-USB-162, AVR-USB-32U4 and AVR-USB-T32U4 Boards + * - Olimex AVR-ISP-MK2 + * - Paranoid Studio's US2AX (V1, V2 and V3 hardware revisions) + * - PJRC Teensy (1.x and 2.x versions) + * - Pololu A-Star Micro + * - Rikus' U2S + * - Sparkfun U2 Breakout Board + * - Stange ISP Programmer Board + * - TCNISO Blackcat USB JTAG + * - Tempusdictum Benito + * - Tom's USBTINY-MKII (all revisions and versions) + * - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers) + */ + +/** + * \page Page_UC3Support Atmel 32-Bit UC3 AVR (UC3) + * + * \warning The AVR32 UC3 device support is currently <b>experimental</b>, and is included for preview purposes only. + * + * \section Sec_UC3Support_Devices Supported Microcontroller Models + * + * Currently supported UC3 models: + * + * <table> + * <tr> + * <th width="150px">Part</th> + * <th width="150px">USB Device Mode</th> + * <th width="150px">USB Host Mode</th> + * </tr> + * <tr> + * <td>AT32UC3A364</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A364S</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A464</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A464S</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3B064</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3B164</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A0128</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A1128</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A3128</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A3128S</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A4128</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A4128S</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3B0128</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3B1128</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A0256</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A1256</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A3256</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A3256S</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A4256</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A4256S</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3B0256</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3B1256</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A0512</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3A1512</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3B0512</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * <tr> + * <td>AT32UC3B1512</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#00EE00">Yes</td> + * </tr> + * </table> + * + * \section Sec_UC3Support_Boards Supported Atmel Boards + * + * Currently supported Atmel UC3 boards (see \ref Group_BoardTypes): + * - EVK1100 + * - EVK1101 + * - EVK1104 + * - UC3-A3 Xplained + * + * \section Sec_UC3Support_ThirdParty Supported Third Party Boards + * + * Currently supported third-party boards (see \ref Group_BoardTypes for makefile \c BOARD constant names): + * - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers) + */ + +/** + * \page Page_XMEGASupport Atmel USB XMEGA AVR (XMEGA) + * + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * \section Sec_XMEGASupport_Devices Supported Microcontroller Models + * + * Currently supported XMEGA models: + * + * <table> + * <tr> + * <th width="150px">Part</th> + * <th width="150px">USB Device Mode</th> + * <th width="150px">USB Host Mode</th> + * </tr> + * <tr> + * <td>ATXMEGA16A4U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA32A4U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA64A4U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA128A4U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA64A3U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA128A3U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA192A3U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA256A3U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA256A3BU</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA128A1U</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA64B3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA128B3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA64B1</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA128B1</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA64C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA128C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA192C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA256C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA384C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA16C4</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA32C4</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * </table> + * + * \section Sec_XMEGASupport_Boards Supported Atmel Boards + * Currently supported Atmel XMEGA boards (see \ref Group_BoardTypes): + * - XMEGA A3BU Xplained + * - XMEGA B1 Xplained + * - XMEGA C3 Xplained + * + * \section Sec_XMEGASupport_ThirdParty Supported Third Party Boards + * Currently supported third-party boards (see \ref Group_BoardTypes for makefile \c BOARD constant names): + * - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers) + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/DirectorySummaries.txt b/lib/lufa/LUFA/DoxygenPages/DirectorySummaries.txt new file mode 100644 index 0000000000..87b863c28b --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/DirectorySummaries.txt @@ -0,0 +1,80 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \dir Platform + * \brief Platform specific drivers. + * + * This folder contains platform specific drivers and defines for various supported architectures. These may or may + * not be used in a LUFA application, and are provided for convenience purposes. + * + * \dir Drivers + * \brief Library hardware and software drivers. + * + * This folder contains all the library hardware and software drivers for each supported board, architecture and + * microcontroller model. + * + * \dir Drivers/Misc + * \brief Miscellaneous driver files. + * + * This folder contains drivers for aspects other than the USB interface, board hardware or microcontroller peripherals. + * + * \dir Drivers/Peripheral + * \brief Microcontroller peripheral driver files. + * + * This folder contains drivers for various low level microcontroller peripherals, usually located on the microcontroller + * die within the same physical chip. + * + * \dir Drivers/USB + * \brief USB controller peripheral driver files. + * + * This folder contains the complete LUFA USB stack and controller files, including the core driver and stack, as well + * as the USB class driver implementations. + * + * \dir Drivers/USB/Core + * \brief Core USB driver files. + * + * This folder contains the core USB stack and controller driver files, to correctly implement USB functionality on the + * target architecture and microcontroller model. This + * + * \dir Drivers/USB/Class + * \brief USB Class helper driver files. + * + * This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library, + * but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive + * development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications. + * + * \dir Drivers/USB/Class/Device + * \brief USB Device Class helper driver files. + * + * Device mode drivers for the standard USB classes. + * + * \dir Drivers/USB/Class/Host + * \brief USB Host Class helper driver files. + * + * Host mode drivers for the standard USB classes. + * + * \dir Drivers/Board + * \brief Board hardware driver files. + * + * This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from + * the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of + * hardware placed on supported boards. + * + * \dir CodeTemplates + * \brief Code templates for use in LUFA powered applications. + * + * This contains code templates for board drivers, sample LUFA project makefiles and other similar templates that can be copied into + * a LUFA powered application and modified to speed up development. + * + * \dir CodeTemplates/DriverStubs + * \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate. + * + * This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those + * directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files + * copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board, + * the corresponding LUFA board APIs will work correctly with the non-standard board hardware. + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/Donating.txt b/lib/lufa/LUFA/DoxygenPages/Donating.txt new file mode 100644 index 0000000000..68228ac944 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/Donating.txt @@ -0,0 +1,25 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_Donating Donating to Support This Project + * + * \image html Images/Author.jpg "Dean Camera, LUFA Developer" + * + * I am a software developer working on LUFA in my spare time. The development and support of this library requires + * much effort from myself, as I am the sole developer, maintainer and supporter. Please consider donating a small + * amount to support this and my future Open Source projects - All donations are <i>greatly</i> appreciated. + * + * Note that commercial entities can remove the attribution portion of the LUFA license by a one-time fee - see + * \ref Page_LicenseInfo for more details (<b>Note: Please do NOT pay this in advance through the donation link below - + * contact author for payment details.</b>). + * + * \htmlonly + * \image html "http://www.pledgie.com/campaigns/6927.png" + * \endhtmlonly + * <a href="http://www.lufa-lib.org/donate">Donate to this project via PayPal</a> - Thanks in Advance! + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/FutureChanges.txt b/lib/lufa/LUFA/DoxygenPages/FutureChanges.txt new file mode 100644 index 0000000000..af11863743 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/FutureChanges.txt @@ -0,0 +1,47 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + + /** \page Page_FutureChanges Future Changes + * + * Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete. + * This gives an unordered list of future changes which may be available in future releases of the library. + * If you have an item to add to this list, please contact the library author via email, the LUFA mailing list, + * or post your suggestion as an enhancement request to the project bug tracker. + * + * <b>Targeted for Future Releases:</b> + * - Code Features + * -# Add hub support when in Host mode for multiple devices + * -# Investigate virtual hubs when in device mode instead of composite devices + * -# Re-add interrupt Pipe/Endpoint support + * -# Update stream APIs to use DMA transfers on supported architectures + * -# Pull out third party libraries into a separate folder and reference them as required + * -# Add a LUFA_YIELD macro for integration into a third-party RTOS + * -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects + * -# Fix HID report parser usage support for array types + * -# Make HOST_DEVICE_SETTLE_DELAY_MS a global variable that can be changed + * -# Add MANDATORY_EVENT_FUNCTIONS compile time option + * -# Add watchdog support to the library and apps/bootloaders + * -# Limit the maximum size of control transfers + * - Testing/Verification + * -# Re-run USBIF test suite on all classes to formally verify operation + * -# Implement automated functional testing of all demos + * - Documentation/Support + * -# Add detailed overviews of how each demo works + * -# Add board overviews + * -# Write LUFA tutorials + * - Demos/Projects + * -# Add class driver support for Test and Measurement class + * -# Add class driver support for EEM class + * -# Add class driver support for ECM class + * -# Add class driver generic HID report host demo + * -# Implement flow control for USB to Serial project + * - Ports + * -# Port all demos to multiple architectures + * -# Finish USB XMEGA port + * -# Add AVR32 UC3C, UC3D and UC3L support + * -# Other (commercial) C compilers + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/GettingStarted.txt b/lib/lufa/LUFA/DoxygenPages/GettingStarted.txt new file mode 100644 index 0000000000..9ceec1e04e --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/GettingStarted.txt @@ -0,0 +1,37 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_GettingStarted Getting Started + * + * Getting started with LUFA is easy; read the content below to get on your way to your first LUFA powered application. + * + * \section Sec_DemosOverview The LUFA Demo Applications + * + * Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and + * ultimately build upon for your own projects. All the demos (where possible) come pre-configured to build and + * run correctly on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz + * master clock. This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most + * popular Atmel USB demonstration board to date. To learn how to reconfigure, recompile and program the included + * LUFA applications using different settings, see the subsections below. + * + * \section Sec_ClassOrLowLevel Class Driver and Low Level Demos + * + * Most of the included demos in the /Demos/ folder come in both ClassDriver and LowLevel varieties. If you are new + * to LUFA, it is highly recommended that you look at the ClassDriver versions first, which use the pre-made USB + * Class Drivers (\ref Group_USBClassDrivers) to simplify the use of the standard USB classes in user applications. + * These demos give a basic but easy to use interface to the USB class used in the demo application, such as HID or + * CDC. + * + * Those needing absolute control over the class implementation can look at the LowLevel demos, which implement the + * required USB class directly in the demo application using the lowest level LUFA APIs. + * + * + * <b>Subsections:</b> + * \li \subpage Page_ConfiguringApps - How to Configure the Included Demos, Projects and Bootloaders + * \li \subpage Page_CompilingApps - How to Compile the Included Demos, Projects and Bootloaders + * \li \subpage Page_ProgrammingApps - How to Program an AVR with the Included Demos, Projects and Bootloaders + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/Groups.txt b/lib/lufa/LUFA/DoxygenPages/Groups.txt new file mode 100644 index 0000000000..2dfa4209d4 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/Groups.txt @@ -0,0 +1,38 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \defgroup Group_BoardDrivers Board Drivers + * + * \brief Functions, macros, variables, enums and types related to the control of physical board hardware. + */ + +/** \defgroup Group_PeripheralDrivers On-chip Peripheral Drivers + * + * \brief Functions, macros, variables, enums and types related to the control of AVR subsystems. + */ + +/** \defgroup Group_MiscDrivers Miscellaneous Drivers + * + * \brief Miscellaneous driver Functions, macros, variables, enums and types. + */ + +/** \defgroup Group_PlatformDrivers_AVR8 AVR8 + * \ingroup Group_PlatformDrivers + * + * \brief Drivers relating to the AVR8 architecture platform, such as clock setup and interrupt management. + */ + +/** \defgroup Group_PlatformDrivers_XMEGA XMEGA + * \ingroup Group_PlatformDrivers + * + * \brief Drivers relating to the XMEGA architecture platform, such as clock setup and interrupt management. + */ + +/** \defgroup Group_PlatformDrivers_UC3 UC3 + * \ingroup Group_PlatformDrivers + * + * \brief Drivers relating to the UC3 architecture platform, such as clock setup and interrupt management. + */ diff --git a/lib/lufa/LUFA/DoxygenPages/Images/Author.jpg b/lib/lufa/LUFA/DoxygenPages/Images/Author.jpg Binary files differnew file mode 100644 index 0000000000..e8f5541a0e --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/Images/Author.jpg diff --git a/lib/lufa/LUFA/DoxygenPages/Images/LUFA.png b/lib/lufa/LUFA/DoxygenPages/Images/LUFA.png Binary files differnew file mode 100644 index 0000000000..54fa1a6643 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/Images/LUFA.png diff --git a/lib/lufa/LUFA/DoxygenPages/Images/LUFA_thumb.png b/lib/lufa/LUFA/DoxygenPages/Images/LUFA_thumb.png Binary files differnew file mode 100644 index 0000000000..efa5386778 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/Images/LUFA_thumb.png diff --git a/lib/lufa/LUFA/DoxygenPages/KnownIssues.txt b/lib/lufa/LUFA/DoxygenPages/KnownIssues.txt new file mode 100644 index 0000000000..183036c483 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/KnownIssues.txt @@ -0,0 +1,234 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + + /** \page Page_KnownIssues Known Issues + * The following are known issues present in each official LUFA release. This list should contain all known + * issues in the library. Most of these issues should be corrected in the future release - see + * \ref Page_FutureChanges for a list of planned changes in future releases. + * + * \section Sec_KnownIssues170418 Version 170418 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8/10). + * - Build System + * - No known issues. + * - Atmel Studio Integration + * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". + * - When switching boards after changing the device selection, a second conflicting \c BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the "Toolchain" tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. + * + * \section Sec_KnownIssues151115 Version 151115 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * - Atmel Studio Integration + * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". + * - When switching boards after changing the device selection, a second conflicting \c BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the "Toolchain" tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. + * + * \section Sec_KnownIssues140928 Version 140928 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * - Atmel Studio Integration + * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". + * - When switching boards after changing the device selection, a second conflicting \c BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the "Toolchain" tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. + * + * \section Sec_KnownIssues140302 Version 140302 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * - Atmel Studio Integration + * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". + * - When switching boards after changing the device selection, a second conflicting BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the Toolchain tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. + * + * \section Sec_KnownIssues130901 Version 130901 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * - Atmel Studio Integration + * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". + * - When switching boards after changing the device selection, a second conflicting BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the Toolchain tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. + * + * \section Sec_KnownIssues130303 Version 130303 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release, + * although the architecture is supported in the LUFA core library. + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * + * \section Sec_KnownIssues120730 Version 120730 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release, + * although the architecture is supported in the LUFA core library. + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/LUFAPoweredProjects.txt b/lib/lufa/LUFA/DoxygenPages/LUFAPoweredProjects.txt new file mode 100644 index 0000000000..fa94add496 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/LUFAPoweredProjects.txt @@ -0,0 +1,226 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_LUFAPoweredProjects User Projects Powered by LUFA + * + * LUFA is currently in use all around the world, in many applications both commercial and non-commercial. Below is a + * list of known public LUFA powered projects, which all use the LUFA library in some way. Feel free to visit each project's + * home page for more information on each project. + * + * If you have a project that you would like to add to this list, please contact me via the details on the main page of this + * documentation. + * + * \section Sec_BoardsUsingLUFA AVR-USB Development Boards Using LUFA + * + * The following is a list of known AVR USB development boards, which recommend using LUFA for the USB stack. Some of these + * are open design, and all are available for purchase as completed development boards suitable for project development. + * + * \li AVR-USB-162, a USBKEY-like development board for the AT90USB162: http://olimex.com/dev/avr-usb-162.html + * \li Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/wiki/benito + * \li Duce, the successor to the Benito #7: http://dorkbotpdx.org/wiki/duce + * \li JM-DB-U2, an ATMEGA32U2 development board: http://u2.mattair.net/index.html + * \li Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/ + * \li Microsin AVR-USB162 breakout board, a DIY AT90USB162 development board: http://microsin.ru/content/view/685/44/ + * \li Minimus USB, a board specially designed for PSGroove: http://www.minimususb.com/ + * \li Nanduino, a do-it-yourself AT90USB162 board: http://www.makestuff.eu/wordpress/?page_id=569 + * \li Sparkfun ATMEGA8U2 breakout board: http://www.sparkfun.com/products/10277 + * \li Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html + * \li U2DIL/U4DIL, a set of DIP layout USB AVR boards: http://www.reworld.eu/re/en/products/u2dil/ + * \li USB2AX, a tiny USB to serial converter board: http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX + * \li USBFOO 2, AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102 + * + * \section Sec_LUFAProjects Projects Using LUFA (Hobbyist) + * + * The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library + * can be incorporated into many different applications. + * + * \li Accelerometer Game Joystick: http://www.crictor.co.il/he/episodes/joystick/ + * \li Adjacent Reality Motion Tracker: http://www.adjacentreality.org/ + * \li AD9833 based USB Function Generator: http://tuomasnylund.fi/drupal6/content/ad9833-based-usb-function-generator + * \li AERY development platform for the AVR32 devices: http://www.aery32.com/ + * \li AM Radio transmitter: http://amcinnes.info/2012/uc_am_xmit/ + * \li Arcade Controller: http://fletchtronics.net/arcade-controller-made-petunia + * \li Arcade Joystick: http://jamie.lentin.co.uk/embedded/arcade-joystick/ + * \li AttoBasic AVR BASIC interpreter: http://cappels.org/dproj/AttoBasic_Home/AttoBasic_Home.html + * \li AVR USB Modem, a 3G Wireless Modem host: http://code.google.com/p/avrusbmodem/ + * \li Bicycle POV: http://www.code.google.com/p/bicycleledpov/ + * \li Bluetooth Explorerbot: http://code.google.com/p/bluetooth-explorerbot/ + * \li Bus Ninja, an AVR clone of the popular BusPirate project: http://blog.hodgepig.org/busninja/ + * \li CAMTRIG, a remote Camera Trigger device: http://code.astraw.com/projects/motmot/camtrig + * \li ChameleonMini, a smart card emulator: https://github.com/skuep/ChameleonMini + * \li CD Driver Emulator Dongle for ISO Files: http://cdemu.blogspot.com/ + * \li ChipWhisperer, a signal capture device: https://www.assembla.com/spaces/chipwhisperer/wiki/ChipWhisperer_Rev2_Capture_Hardware + * \li ClockTamer, a configurable clock generator: http://code.google.com/p/clock-tamer/ + * \li Collection of alternative Arduino Uno firmwares: http://hunt.net.nz/users/darran/ + * \li Computer controlled LED matrix (Russian): http://we.easyelectronics.ru/AVR/nebolshoy-primer-s-lufa-hidapi.html + * \li CULFW, a 868MHz RF packet encoder/decoder: http://www.koeniglich.de/culfw/culfw.html + * \li Dashkey, a custom PC keyboard controller: http://geekhack.org/showwiki.php?title=Island:19096 + * \li DIY PS3 controller emulator: https://code.google.com/p/diyps3controller/ + * \li EMuSer, a USB-RS422 adapter for E-Mu samplers: http://www.emxp.net/EMuSer.htm + * \li EQ Track, a telescope mount controller: http://sourceforge.net/projects/eqtrack/ + * \li Estick JTAG, an ARM JTAG debugger: http://code.google.com/p/estick-jtag/ + * \li "Fingerlicking Wingdinger" (WARNING: Bad language if no Javascript), a MIDI controller: http://noisybox.net/electronics/wingdinger/ + * \li Flyatar, a real-time fly tracking system: https://github.com/peterpolidoro/Flyatar + * \li FootJoy, a 22 button, 6-axis josystick with keyboard and mouse modes: https://bitbucket.org/sirbrialliance/foot-joy/ + * \li Gamecube controller to USB adapter: https://www.facebook.com/media/set/?set=a.10150202447076304.310536.688776303&l=df53851c50 + * \li Garmin GPS USB to NMEA standard serial sentence translator: http://github.com/nall/garmin-transmogrifier/tree/master + * \li Geiger Counter with USB interface: http://www.hforsten.com/i-made-a-geiger-counter.html + * \li Generic HID Device Creator: http://generichid.sourceforge.net/ + * \li Generic HID Open Source Framework: http://www.waitingforfriday.com/index.php/USB_Generic_HID_Open_Source_Framework_for_Atmel_AVR_and_Windows + * \li Ghetto Drum, a MIDI drum controller: http://noisybox.net/art/gdrum/ + * \li GPS enabled lap timer for vehicles: http://www.assembla.com/code/ironlung/subversion/nodes/trunk/LapTimer + * \li GSynth, an 8-bit sound synthesizer: https://github.com/gcielniak/GSynth + * \li Gumbi, a Python library and USB GPIO controller: https://code.google.com/p/gumbi/ + * \li Hardware Volume Control: https://github.com/davidk/hw-volume-control + * \li Hiduino, a USB-MIDI replacement firmware for the Arduino Uno: http://code.google.com/p/hiduino/ + * \li HoodLoader2, an Arduino Uno enhanced USB AVR coprocessor firmware: https://github.com/NicoHood/HoodLoader2 + * \li IBM capacitive keybord replacement controller: http://downloads.cornall.co/ibm-capsense-usb-web/ibm-capsense-usb.html + * \li Ikea RGB LED USB modification: http://slashhome.se/p/projects/id/ikea_dioder_usb/#project + * \li IR electricity meter monitor: http://sourceforge.net/projects/irmetermon/ + * \li IR Remote to Keyboard decoder: http://netzhansa.blogspot.com/2010/04/our-living-room-hi-fi-setup-needs-mp3.html + * \li Jukebox panic button: http://thinkl33t.co.uk/the-panic-button + * \li Kinesis replacement firmware: https://github.com/chrisandreae/kinesis-firmware + * \li LED Panel controller: http://projects.peterpolidoro.net/caltech/panelscontroller/panelscontroller.htm + * \li Linux Secure Storage Dongle: http://github.com/TomMD/teensy + * \li LUFA powered DDR dance mat (French): http://logicien-parfait.fr/dokuwiki/doku.php?id=projet:ddr_repair + * \li Macintosh SIMM ROM Programmer: https://code.google.com/p/mac-rom-simm-programmer/ + * \li MakeTV Episode Dispenser: http://www.youtube.com/watch?v=BkWUi18hl3g + * \li Mec64,a Commodore 64 keyboard: http://deskthority.net/workshop-f7/mec64-keyboard-t4522.html + * \li MidiMonster, a USB-to-MIDI gateway board: http://www.dorkbotpdx.org/wiki/midimonster + * \li MIDI Theremin: http://baldwisdom.com/usb-midi-controller-theremin-style-on-arduino-uno/ + * \li MIDI interface hack of a toy Guitar: http://blog.x37v.info/2011/06/26/toy-guitar-hacked-midi-conroller + * \li MiniBloq, a graphical Ardunio programming environment : http://minibloq.org/ + * \li MiXley, a port of the Teacup 3D printer firmware for the USB AVRs: http://codaset.com/michielh/mixley + * \li Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3 + * \li Moco, a native Arduino Uno MIDI replacement firmware: http://web.mac.com/kuwatay/morecat_lab./MocoLUFA.html + * \li Monash ECSE Smart Packet Radio Testbed: http://www.ecse.monash.edu.au/twiki/bin/view/WSRNLab/SmartPacketRadio + * \li Motherboard BIOS flasher: http://www.coreboot.org/InSystemFlasher + * \li Multi-button Joystick (French): http://logicien-parfait.fr/dokuwiki/doku.php?id=projet:joystick + * \li Music Playing Alarm Clock (Tutorial): http://www.instructables.com/id/Music-Playing-Alarm-Clock/ + * \li Nehebkau, Laptop Controlled Keyboard and Mouse: http://www.frank-zhao.com/cache/nehebkau.php + * \li NeroJTAG, a JTAG dongle: https://github.com/makestuff/neroJtag + * \li NES Controller USB modification: https://github.com/nfd/nes_adapter + * \li Nikon wireless camera remote control (Norwegian): http://hekta.org/~hpe1119/ + * \li Nintendo Four-Score, USB NES 4-player controller adapter: http://www.waitingforfriday.com/index.php/Nintendo_Four_Score_USB + * \li Numpad keyboard: http://tuomasnylund.fi/drupal6/content/usb-cherry-mx-numpad + * \li Opendous-JTAG, an open source ARM JTAG debugger: http://code.google.com/p/opendous-jtag/ + * \li Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/ + * \li Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm + * \li Password keyring: http://owlsan.blogspot.no/2014/06/keyring-project-version-10.html + * \li Picade alternative firmware, a retro Arcade controller/cabinet: https://github.com/rktrlng/picade_lufa + * \li PPM signal generator over USB: https://github.com/G33KatWork/USBPPM + * \li Programmable keyboard controller: http://41j.com/blog/2011/10/a-programmable-keyboard-controller/ + * \li Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/ + * \li Project Surface, a touch interface controller for Windows 8: https://code.google.com/p/project-surface/ + * \li PSGroove, a Playstation 3 Homebrew dongle: http://github.com/psgroove + * \li PS/2 to USB adapter: https://github.com/makestuff/p2ukbd + * \li RaspiFace, an Arduino platform bridge for the Raspberry Pi: http://www.raspiface.com/ + * \li Reflow oven controller: http://danstrother.com/2011/01/15/reflow-oven-controller/ + * \li RFPirate, a RF experimentation platform: https://github.com/ebuller/RF-Pirate + * \li RF Power Meter, based on the AD8307 log amp: https://sites.google.com/site/lofturj/ad8307-power-meter + * \li RF Transceiver using the MRF49XA: http://alternet.us.com/?page_id=1494 + * \li SD Card reader: http://elasticsheep.com/2010/04/teensy2-usb-mass-storage-with-an-sd-card/ + * \li SDR1, a Software Defined Radio firmware: https://code.google.com/p/sdr-mk1/ + * \li SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398 + * \li Serial Line bus analyser: http://www.pjrc.com/teensy/projects/SerialAnalyzer.html + * \li Simple USB LED Controller (SULC): https://github.com/scottbez1/sulc + * \li SNES custom FLASH ROM: http://electrifiedfoolingmachine.co/?page_id=633 + * \li Smartcard Detective: https://code.google.com/p/smartcarddetective/ + * \li SmartportVHD Apple II Mass Storage adapter: http://pcedric3.free.fr/SmartportVHD/ + * \li Single LED Matrix Display: http://guysoft.wordpress.com/2009/10/08/bumble-b/ + * \li Simple USB LED Controller: https://github.com/scottbez1/sulc + * \li Stripe Snoop, a Magnetic Card reader: http://www.ossguy.com/ss_usb/ + * \li Stylophone, with USB MIDI connectivity: http://www.waitingforfriday.com/index.php/Stylophone_Studio_5 + * \li Teensy SD Card .WAV file player: http://elasticsheep.com/2010/04/teensy2-usb-wav-player-part-1/ + * \li Touch It (Fabulously), presumably art: http://touch.it.fa.bulo.us/ly/ + * \li Touchscreen Input Device: http://capnstech.blogspot.com/2010/07/touchscreen-update.html + * \li UDFS, a BBC Micro USB disk filing system: https://github.com/makestuff/udfs + * \li Universal USB AVR Module: http://usbavr.bplaced.net/ + * \li USB2AX, a USB to Dynamixel network adapter: http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX + * \li USBPass, a USB password keeper: http://sroz.net/projects/usbpass/ + * \li USB Business Card: http://www.limpkin.fr/index.php?post/2012/09/15/My-new-business-card + * \li USB Function Generator: http://tuomasnylund.fi/drupal6/content/ad9833-based-usb-function-generator + * \li USB Infrared Receiver/Transmitter: http://vaton4.web2001.cz/ + * \li USB Interface for Playstation Portable Devices: http://forums.ps2dev.org/viewtopic.php?t=11001 + * \li USB MIDI to DMX controller: http://github.com/hanshuebner/miDiMX + * \li USB Mood Light: https://github.com/hsbp/usb_moodlight + * \li USB powered Geiger Counter: http://uhrheber.wordpress.com/2011/04/28/a-usb-powered-geiger-counter-for-the-z2-and-other-computers/ + * \li Userial, a USB to Serial converter with SPI, I2C and other protocols: http://www.tty1.net/userial/ + * \li Wii Classic Controller to USB converter: https://github.com/crazyiop/wii-classic-2-usb + * \li Wireless MIDI Guitar system: http://www.ise.pw.edu.pl/~wzab/wireless_guitar_system/ + * \li XBOX 360 Startup Sound Changer: http://www.homebrew-connection.org/change-your-xbox-360-startup-sounds-yourself/ + * \li Xnormidi, a C MIDI library: http://x37v.info/projects/xnormidi + * \li XUM1541, a Commodore 64 floppy drive to USB adapter: http://www.root.org/~nate/c64/xum1541/ + * \li Zeus, a touch screen computer for music manipulation: http://www.benbengler.com/developments_zeus.html + * + * \section Sec_LUFACommercialProjects Projects Using LUFA (Commercial) + * + * The following is a list of known commercial products using LUFA. Some of these are open source, although many are "black-box" + * solutions with no source code given. Those companies which have purchased a Commercial License to LUFA (see \ref Page_LicenseInfo) + * are not listed here unless specifically requested. + * + * \li Alphasphere, a MIDI input sphere device for music creation: http://www.alphasphere.com/ + * \li Arduino Uno and Leonardo, official Arduino boards: http://www.arduino.cc + * \li ARPS Locator: http://la3t.hamradio.no/lab//?id=tracker_en + * \li AsTeRICS assistive technologies project, HID actuator: http://www.asterics.eu + * \li BitFury, a Bitcoin ASIC miner: https://github.com/aauer1/LUFA-BitFury/tree/master/Projects/BitfuryBTC + * \li Ceberus, a MadCatz Xbox 360 arcade stick modifier: http://www.phreakmods.com/products/cerberus + * \li CFFA3000, a CompactFlash interface for the Apple II: http://www.dreher.net/CFforAppleII + * \li ChameleonMini, a RFID monitoring tool: https://github.com/emsec/ChameleonMini/wiki + * \li Digital Survey Instruments Magnetometer and Pointer: http://www.digitalsurveyinstruments.com/ + * \li FinchRobot, a robot designed for educational use: http://www.finchrobot.com/ + * \li Flysight, a GPS logger for wingsuit pilots: http://flysight.ca/ + * \li Goldilocks, an Arduino compatible clone: http://feilipu.me/2014/03/08/goldilocks-1284p-arduino-uno-clone/ + * \li HummingBird Kit, a robotics learning platform: http://www.hummingbirdkit.com/ + * \li LP1, an AVRISP-MKII Clone AVR Programmer: http://embeddedglow.com/items/LP1/LP1.php + * \li Penguino, an Arduino Board With On-Board LUFA Powered Debugger/Programmer: http://wiki.icy.com.au/PenguinoAVR + * \li PhatIO, a filesystem based I/O interface: http://www.phatio.com/ + * \li PIR-1, an IR control interface for consumer electronics: http://www.promixis.com/pir-1.php + * \li PIR-4, a USB Connected 4 port IR transmitter: http://promixis.com/pir-4.php + * \li PortPilot, a USB device charger with power meter: http://portpilot.net/ + * \li KeyGlove, an alternative input system: http://www.keyglove.net/ + * \li Many of Busware's Products: http://www.busware.de/ + * \li MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/ + * \li MIDI USB Arduino Shield: http://openpipe.cc/products/midi-usb-shield/ + * \li Norduino, a wireless Arduino: http://norduino.robomotic.com/norduino-is-now-usb-hid/ + * \li Olimex AVR-ISP-MK2, an AVRISP-MKII Clone AVR Programmer: https://www.olimex.com/dev/avr-isp-mk2.html + * \li Retrode, a USB Games Console Cartridge Reader: http://www.retrode.org + * \li RFI21.1EU UHF RFID reader: http://www.metra.cz/rfid/uhf-rfid-ctecky/rfi21-1eu-uhf-rfid-ctecka.htm + * \li SmartCardDetective, a Smart Card analysis tool: http://www.smartcarddetective.com/ + * \li TimelapsePlus, a digital camera time lapse tool: https://github.com/timelapseplus/TimelapsePlus-Firmware + * \li USBTINY-MKII, an AVRISP-MKII Clone AVR Programmer: http://tom-itx.no-ip.biz:81/~webpage/boards/USBTiny_Mkii/USBTiny_Mkii_index.php + * \li UDS18B20 USB Temperature sensor: http://toughlog.org/uds18b20/ + * \li VMeter, a USB MIDI touch strip controller: http://www.vmeter.net/ + * \li XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/ + * \li Zeptoprog, a multifunction AVR programmer: http://www.mattairtech.com/index.php/featured/zeptoprog.html + * + * \section Sec_LUFAPublications Publications Mentioning LUFA + * The following are published magazines which have either mentioned or featured the LUFA library. + * + * \li Elektor Magazine, "My First AVR-USB" by Antoine Authier (feature), January 2010 Issue + * \li Elektor Magazine, "USB is Cool/Sucks" by Jerry Jacobs and Chris Vossen (minor mention), January 2010 Issue + * \li Elektor Magazine, "20 x Open Source" by Jens Nickel, March 2010 Issue + * \li Circuit Cellar Magazine, "Advanced USB Design Debugging" by Collin O'Flynn, August 2010 Issue + * \li "Some Assembly Required: Assembly Language Programming with the AVR Microcontroller" by Timothy S. Margush + * \li Elektor Magazine, "Taming the Beast (2)" by Clemens Valens/Raymond Vermeulen, January 2014 Issue + * + * \section Sec_LUFANotableMentions Other Notable Mentions of LUFA + * The following are non-print but notable mentions of the LUFA library. + * + * \li Adafruit "Ask an Engineer", 7th November 2010 + * \li Arduino 2010 Keynote speech + * \li The Amp Hour podcast blog #11 + * \li Blackhat 2011 conference, "Exploiting USB Devices with Arduino" + * + * \section Sec_PortsAndForks Non-Official LUFA Ports and Forks + * The following are unofficial forks of the LUFA codebase, which implement different features such as support for + * additional architectures. + * + * \li NXP's official LPCOpen "LPCUSBLib" LUFA fork, for LPC devices: http://www.lpcware.com/ + * \li Kevin Mehall's LUFA port to the NXP LPC13xx: https://github.com/kevinmehall/LUFA-LPC13xx + * \li Mark Ding's port for the Silicon Labs SiM3U1xx: https://www.github.com/MarkDing/USB_CDC + * \li Mark Ding's port for the Silicon Labs EFM32 Giant Gecko: https://github.com/MarkDing/lufa-efm32 + */ diff --git a/lib/lufa/LUFA/DoxygenPages/LibraryResources.txt b/lib/lufa/LUFA/DoxygenPages/LibraryResources.txt new file mode 100644 index 0000000000..f69d4344c1 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/LibraryResources.txt @@ -0,0 +1,33 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_Resources Library Resources + * + * \section Sec_UnofficialResources Unofficial Resources + * Unofficial Russian LUFA documentation translation: http://microsin.ru/Download.cnt/doc/LUFA/ \n + * Tutorial for LUFA USB Control Transfers: http://www.avrbeginners.net/new/tutorials/usb-control-transfers-with-lufa/ + * + * \section Sec_ProjectPages LUFA Related Webpages + * Project Homepage: http://www.lufa-lib.org \n + * Commercial Licenses: http://www.lufa-lib.org/license \n + * Author's Website: http://www.fourwalledcubicle.com \n + * Development Blog: http://www.fourwalledcubicle.com/blog \n + * + * \section Sec_ProjectHelp Assistance With LUFA + * Support Mailing List: http://www.lufa-lib.org/support \n + * Author's Email: dean [at] fourwalledcubicle [dot] com \n + * + * \section Sec_InDevelopment Latest In-Development Source Code + * Issue Tracker: http://www.lufa-lib.org/tracker \n + * Public GIT Repository: http://www.lufa-lib.org/git \n + * Latest Repository Source Archive: http://www.lufa-lib.org/latest-archive \n + * Commit RSS Feed: http://www.lufa-lib.org/rss \n + * + * \section Sec_USBResources USB Resources + * USB-IF Website: http://www.usb.org \n + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/LicenseInfo.txt b/lib/lufa/LUFA/DoxygenPages/LicenseInfo.txt new file mode 100644 index 0000000000..86ed124bb2 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/LicenseInfo.txt @@ -0,0 +1,43 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_LicenseInfo Source Code License + * + * The LUFA library is currently released under the MIT license, included below. + * + * \section Sec_LicenseForHumans License Summary for Human Beings + * Everyone is free to use LUFA without payment - even in commercial applications + * where the product source code is not publicly disclosed. However, use of the + * library must be in accordance with the library license conditions. + * + * If you wish to use LUFA without payment, you <b>must</b> include a copy of the + * full license text below with your product or project - on your website, and in + * an accompanying manual or other materials for the product. As long as the entire + * license text is made available and obvious to the users of your product, you + * are free to incorporate the LUFA library into your product without special + * additional licensing. + * + * \section Sec_CommercialLicenses Commercial Licensing + * In some instances the small requirement for public disclosure of LUFA within a + * product is unwanted; in these instances a commercial license is offered up as an + * alternative to the standard LUFA license. + * + * Commercial entities can opt out of the public disclosure clause in this license + * for a one-time US$1500 payment. This provides a non-exclusive modified MIT + * licensed which allows for the free use of the LUFA library, bootloaders and + * (where the sole copyright is attributed to Dean Camera) demos without public + * disclosure within an organization, in addition to three free hours of consultation + * with the library author, and priority support. + * + * Please visit the Commercial License link on \ref Page_Resources for more information on + * ordering a commercial license for your company. + * + * \section Sec_LicenseText LUFA License Text + * + * \verbinclude License.txt + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/MainPage.txt b/lib/lufa/LUFA/DoxygenPages/MainPage.txt new file mode 100644 index 0000000000..e737c39b5a --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/MainPage.txt @@ -0,0 +1,52 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \mainpage + * + * \image html Images/LUFA.png + * <div align="center"><small><i>Logo design by <a href="http://www.studiomonsoon.com">Studio Monsoon Photography</a></i></small></div> + * \n + * <div align="center"><a href="http://www.lufa-lib.org">http://www.lufa-lib.org</a></div> + * \n + * + * <b>LUFA is donationware. For author and donation information, see \ref Page_Donating.</b> + * + * LUFA is an open-source USB library for the USB-enabled AVR microcontrollers, released under the MIT license (see \ref Page_LicenseInfo). + * It supports a large number of USB AVR models and boards (see \ref Page_DeviceSupport). It is designed to provide an easy to use, + * feature rich framework for the development of USB peripherals and hosts. + * + * LUFA focuses on the microcontroller side of USB development only; it includes no PC host USB driver development facilities - other projects + * such as the Windows Driver Development Kit, Windows USB Device Mode Framework and libusb may be of interest for developing custom OS drivers. + * While custom USB devices can be made with LUFA using such tools, the included demos all use the inbuilt OS drivers for each USB class for + * simplicity. + * + * The library is currently in a stable release, suitable for download and incorporation into user projects for + * both host and device modes. For information about the project progression, see the blog link at \ref Page_Resources. + * + * LUFA is written specifically for the free AVR-GCC compiler, and uses several GCC-only extensions to make the + * library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package, + * from the the WinAVR website (see \ref Page_Resources). + * + * The only required AVR peripherals for LUFA is the USB controller itself and interrupts - LUFA does not require the use of the + * microcontroller's timers or other hardware, leaving more hardware to the application developer. + * + * Accompanying LUFA in the download package is a set of example demo applications, plus several Bootloaders of different classes + * and open source LUFA powered projects. + * + * <b>Subsections:</b> + * \li \subpage Page_LicenseInfo - Project source license and commercial use information + * \li \subpage Page_Donating - Donating to support this project + * \li \subpage Page_DeviceSupport - Current Device and Hardware Support + * \li \subpage Page_ChangeLog - Project Changelog + * \li \subpage Page_KnownIssues - Known Issues + * \li \subpage Page_FutureChanges - Planned Changes to the Library + * \li \subpage Page_GettingStarted - Getting started with LUFA + * \li \subpage Page_DevelopingWithLUFA - Developing with LUFA + * \li \subpage Page_LUFAPoweredProjects - Other Projects Using LUFA + * \li \subpage Page_Resources - LUFA and USB Related Resources + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/MigrationInformation.txt b/lib/lufa/LUFA/DoxygenPages/MigrationInformation.txt new file mode 100644 index 0000000000..7efb312ea8 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/MigrationInformation.txt @@ -0,0 +1,717 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_Migration Migrating from Older Versions + * + * Below is migration information for updating existing projects based on previous versions of the LUFA library + * to the next version released. It does not indicate all new additions to the library in each version change, only + * areas relevant to making older projects compatible with the API changes of each new release. + * + * \section Sec_Migration170418 Version 170418 + * <b>Device Mode</b> + * - The \c CALLBACK_USB_GetDescriptor() callback function into the user application's \c wIndex parameter is now \c uint16_t, not \c uint8_t. + * + * \section Sec_Migration151115 Migrating from 140928 to 151115 + * <b>Non-USB Library Components</b> + * - The ATPROGRAM LUFA build system module now defaults to the Atmel ICE debugger tool, instead of the Atmel JTAG ICE3. + * - The \c Serial_CreateStream() and \c Serial_CreateBlockingStream() functions now require a USART base pointer for XMEGA devices as the first parameter. + * + * \section Sec_Migration140928 Migrating from 140302 to 140928 + * <b>Device Mode</b> + * - The device mode RNDIS class driver now requires a user-supplied buffer and buffer length to operate, rather + * than allocating this buffer internally. + * + * \section Sec_Migration140302 Migrating from 130901 to 140302 + * <b>USB Core</b> + * - The \c VERSION_BCD() macro has changed from accepting one floating point parameter to taking three distinct major/minor/revision integer parameters, as + * some edge cases caused incorrect parsing of the input float into the final integer BCD encoded value. + * + * <b>Non-USB Library Components</b> + * - The \c ATTR_NEVER_INLINE macro, erroneously introduced in a previous release has been removed, as it duplicates the existing \c ATTR_NO_INLINE macro. + * + * <b>Build System</b> + * - The default configuration file for Doxygen is now "doxyfile" rather than "Doxygen.conf", to conform to the Doxygen project's own default file name. + * Set \c DOXYGEN_CONF to override the new default file name. + * + * \section Sec_Migration130901 Migrating from 130303 to 130901 + * <b>Non-USB Library Components</b> + * - The Board Dataflash \c Dataflash_Init() function now automatically configures the appropriate communication interface. + * + * \section Sec_Migration130303 Migrating from 120730 to 130303 + * <b>Device Mode</b> + * - The \ref HID_KEYBOARD_LED_KANA macro was previously misspelled as \c HID_KEYBOARD_LED_KATANA, and had an incorrect value. User applications requiring this + * constant should use the new name, and remove any workarounds for the previously incorrect macro definition. + * - The \c HID_KEYBOARD_SC_EQUAL_SIGN macro has been renamed to \ref HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN, and the previous definition of + * \c HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN has been renamed \ref HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN_AS400 to conform to the definitions in the HID specification. + * + * <b>Host Mode</b> + * - The \ref HID_KEYBOARD_LED_KANA macro was previously misspelled as \c HID_KEYBOARD_LED_KATANA, and had an incorrect value. User applications requiring this + * constant should use the new name, and remove any workarounds for the previously incorrect macro definition. + * - The \c HID_KEYBOARD_SC_EQUAL_SIGN macro has been renamed to \ref HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN, and the previous definition of + * \c HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN has been renamed \ref HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN_AS400 to conform to the definitions in the HID specification. + * + * \section Sec_Migration120730 Migrating from 120219 to 120730 + * <b>Device Mode</b> + * - The device mode Audio Class driver now requires an additional configuration parameter, the Audio Control interface index. Existing applications should + * be adjusted to specify the additional configuration parameter. + * - The HID_DESCRIPTOR_JOYSTICK() macro no longer takes a variable number of axis as a parameter, due to OS incompatibilities; this macro now uses a fixed + * 3 axis of data. User applications should update their calls to this macro and their report structures to suit a fixed 3-axis joystick report. If a user + * application requires more than 3 axis' of data, a custom report descriptor will need to be constructed by hand. + * - The \ref Endpoint_ConfigureEndpoint() function no longer takes in masks for the banks and direction; the number of banks is now an integer argument, and + * the direction is obtained from the full endpoint address within the device. Applications calling Endpoint_ConfigureEndpoint() should update their API + * call to use a full endpoint address (including ENDPOINT_DIR_IN or ENDPOINT_DIR_OUT direction in the MSB of the endpoint address) and an integer number + * of banks. + * - All endpoint functions now operate on full endpoint addresses within the device, rather than a directionless endpoint index. Applications should update + * their API calls to use full endpoint addresses when required within the device. + * - All device mode class drivers have been updated to use a new unified endpoint description structure for all endpoints; existing applications will need + * to update their class driver struct instantiation to match the new scheme (see \ref USB_Endpoint_Table_t). + * - The \c ENDPOINT_BANKS_SUPPORTED() and \c ENDPOINT_MAX_ENDPOINT_SIZE() macros have been removed, as these do not function correctly with the new addressing + * scheme for the endpoint APIs. Please refer to the target device's datasheet for the maximum bank size of each endpoint. + * - The MIDI class driver \ref MIDI_EventPacket_t event packet no longer contains separate \c CableIndex and \c Command entries; these have been combined + * into a single \c Event element which can be constructed using the new macro \ref MIDI_EVENT(). Existing applications should use the new macro and structure + * element name. + * + * <b>Host Mode</b> + * - The Android Accessory Host class driver property strings are now a array of \c char* rather than a struct of named pointers. Existing applications + * should use C99 Designated Initializers with the property string indexes located in \ref AOA_Strings_t instead. + * - The \ref Pipe_ConfigurePipe() function no longer takes in masks for the banks and token; the number of banks is now an integer argument, and the token + * is now inferred from the full pipe address within the device, and the pipe type. Applications calling Pipe_ConfigurePipe() should update their API + * call to use a full pipe address (including PIPE_DIR_IN or PIPE_DIR_OUT direction in the MSB of the pipe address) and an integer number of banks. + * - All pipe functions now operate on full pipe addresses within the device, rather than a directionless pipe index. Applications should update their API + * calls to use full pipe addresses when required within the device. + * - All host mode class drivers have been updated to use a new unified pipe description structure for all pipes; existing applications will need to update + * their class driver struct instantiation to match the new scheme (see \ref USB_Pipe_Table_t). + * - The MIDI class driver \ref MIDI_EventPacket_t event packet no longer contains seperate \c CableIndex and \c Command entries; these have been combined + * into a single \c Event element which can be constructed using the new macro \ref MIDI_EVENT(). Existing applications should use the new macro and structure + * element name. + * - The library "LUFA/Drivers/USB/Core/ConfigDescriptor.c" source file has been renamed "LUFA/Drivers/USB/Core/ConfigDescriptors.c" as this was clashing with + * files in some low level host mode demo applications, preventing parallel project builds. If you are referencing the project source files directly instead + * of using the makefile module names, you will need to adjust your project makefile. + * + * \section Sec_Migration120219 Migrating from 111009 to 120219 + * <b>USB Core</b> + * - The HID_KEYBOARD_MODIFER_* macros in the HID class driver have been corrected to HID_KEYBOARD_MODIFIER_* (note the spelling of "modifier"). + * Existing applications should switch over to the correctly spelled macro names. + * - The names of the USB Device and USB Host class driver files have changed; a new "ClassDevice" and "ClassHost" postfix has been added to the + * respective class driver files. Projects referencing the class driver source files by filename rather than the LUFA_SRC_USBCLASS makefile + * variable should append these postfixes to the source file names. Projects including the USB class driver dispatch headers directly should either + * switch to including the main USB driver header instead, or use the updated header filenames. + * - The USB_CONFIG_ATTR_BUSPOWERED constant has been renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed. All devices must set this bit in + * the Configuration descriptor's attributes field. As all devices are assumed to be bus-powered unless stated otherwise with the + * USB_CONFIG_ATTR_SELFPOWERED flag a replacement constant for bus powered devices is not provided. + * + * <b>Device Mode</b> + * - The device mode Audio class driver now requires a new user application callback, \ref CALLBACK_Audio_Device_GetSetInterfaceProperty(). + * Existing applications must implement this new callback, however if no audio entities are defined in the audio device's descriptors, + * this function may be hard-coded to always return false for previous behaviour to be retained. + * + * \section Sec_Migration111009 Migrating from 110528 to 111009 + * <b>Non-USB Library Components</b> + * - The \c JTAG_DEBUG_ASSERT() macro has been renamed \ref JTAG_ASSERT() to be consistent with \ref STDOUT_ASSERT(). + * + * <b>USB Core</b> + * - By default, unordered Endpoint and Pipe configuration is now allowed once again, via the previous workaround of + * reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimize the compiled program + * size, the new \c ORDERED_EP_CONFIG compile time option may be defined in the project makefile to restrict the ordering + * in exchange for a smaller compiled binary size. + * - The previous \c F_CLOCK symbol, required in the project makefile, has been renamed to \c F_USB. This is due to the previous name + * being far too generic for use in future architecture ports, where multiple clock domains are used. + * + * <b>Device Mode</b> + * - The Endpoint stream functions now all require a \c BytesProcessed parameter instead of the previous callback parameter. + * This should be set to \c NULL to retain previous behaviour of the functions, or point to a location where the number of bytes + * processed in the current transaction can be stored. If the \c BytesProcessed parameter is non \c NULL, each time the endpoint + * bank becomes full and the packet is sent, the routine will exit with the new \ref ENDPOINT_RWSTREAM_IncompleteTransfer + * error code to allow the user application to determine when to send the next chunk of data. + * - The \ref CDC_Device_SendString() function now expects a null terminated string instead of an explicit length. Existing code + * should use the new \ref CDC_Device_SendData() function, or remove the length parameter from the function call. + * - The \c Endpoint_ResetFIFO() function has been renamed to \ref Endpoint_ResetEndpoint(), to make the API function names more + * consistent. Existing applications using the old function name should simply replace it with a call to the new function name. + * - The \c Endpoint_*_Byte() functions have been renamed Endpoint_*_8() to ensure they are correct across all architectures. Existing + * code using these functions should replace the previous function names with the new function names. + * - The \c Endpoint_*_Word() functions have been renamed Endpoint_*_16() to ensure they are correct across all architectures. Existing + * code using these functions should replace the previous function names with the new function names. + * - The \c Endpoint_*_DWord() functions have been renamed Endpoint_*_32() to ensure they are correct across all architectures. Existing + * code using these functions should replace the previous function names with the new function names. + * - The Device mode RNDIS class driver no longer stores the incoming and outgoing packets in the class driver instance; the user is + * now expected to manually define a storage location for the packet data. Packets must now be sent and received manually via a call + * to \ref RNDIS_Device_ReadPacket() and/or \ref RNDIS_Device_SendPacket(). + * - The definition of the Audio class \ref USB_Audio_Descriptor_Format_t has been altered, to remove the fixed singular + * audio sample rate in the descriptor definition, and to rename the \c SampleFrequencyType to the more appropriate + * \c TotalDiscreteSampleRates. Existing applications will need to add an array of \ref USB_Audio_SampleFreq_t elements + * immediately following any \ref USB_Audio_Descriptor_Format_t descriptors, and insert the appropriate sampling rates + * supported by the device, as well as rename the descriptor elements to match the updated element names. + * - The device mode Audio class driver now requires a new user application callback, \ref CALLBACK_Audio_Device_GetSetEndpointProperty(). + * Existing applications must implement this new callback, however if multiple sample rates or pitch control is not used, + * this function may be hard-coded to always return false for previous behaviour to be retained. + * - The \c USB_ConfigurationNumber, \c USB_RemoteWakeupEnabled and \c USB_CurrentlySelfPowered globals have been renamed to + * \ref USB_Device_ConfigurationNumber, \ref USB_Device_RemoteWakeupEnabled and \ref USB_Device_CurrentlySelfPowered to clearly indicate + * the USB mode they relate to. Existing applications using these variables should rename all references to the previous names. + * - The \c ENDPOINT_DESCRIPTOR_DIR_IN and \c ENDPOINT_DESCRIPTOR_DIR_OUT macros have now been replaced by \ref ENDPOINT_DIR_IN and + * \ref ENDPOINT_DIR_OUT to improve code clarity. + * - The \ref HID_DESCRIPTOR_JOYSTICK() macro now takes an additional (first) parameter indicating the number of axis in the joystick. + * + * <b>Host Mode</b> + * - The Pipe stream functions now all require a \c BytesProcessed parameter instead of the previous callback parameter. + * This should be set to \c NULL to retain previous behaviour of the functions, or point to a location where the number of bytes + * processed in the current transaction can be stored. If the BytesProcessed parameter is non \c NULL, each time the pipe + * bank becomes full and the packet is sent, the routine will exit with the new \ref PIPE_RWSTREAM_IncompleteTransfer + * error code to allow the user application to determine when to send the next chunk of data. + * - The \ref PRNT_Host_SendString() and \ref CDC_Host_SendString() functions now expect a null terminated string instead of an explicit + * length. Existing code should use the new \ref PRNT_Host_SendData() and \ref CDC_Host_SendData() functions, or remove the + * length parameter from the function call. + * - The \c Pipe_ClearErrorFlags() function has been removed, as the pipe error flags are now automatically cleared when the + * \ref Pipe_ClearError() function is called. + * - The \c Pipe_*_Byte() functions have been renamed Pipe_*_8() to ensure they are correct across all architectures. Existing code using + * these functions should replace the previous function names with the new function names. + * - The \c Pipe_*_Word() functions have been renamed Pipe_*_16() to ensure they are correct across all architectures. Existing code using + * these functions should replace the previous function names with the new function names. + * - The \c Pipe_*_DWord() functions have been renamed Pipe_*_32() to ensure they are correct across all architectures. Existing code using + * these functions should replace the previous function names with the new function names. + * - The \c USB_Host_ClearPipeStall() function has been renamed to USB_Host_ClearEndpointStall(), as it operates on a full endpoint address + * within the attached device and not a pipe within the host. Existing code using the old function name should update the function calls and + * check for correct usage. + * + * \section Sec_Migration101122 Migrating from 100807 to 101122 + * <b>USB Core</b> + * - A new USB driver source file, \c Drivers/USB/HighLevel/EndpointStream.c now exists. This source file should be added + * to all project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source + * variables. + * - A new USB driver source file, \c Drivers/USB/HighLevel/PipeStream.c now exists. This source file should be added to all + * project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables. + * - The \c EVENT_USB_InitFailure() event has been removed, as the \ref USB_Init() function will no longer fail; if not USB mode is + * specified, the controller will default to UID selection mode. + * - The USB mode specifier constants have been moved into a new enum and renamed. Existing projects should use the equivalent + * value in the new \ref USB_Modes_t enum. + * - All class driver headers are now included as part of the standard \c LUFA/Drivers/USB/USB.h master dispatch header, and should + * no longer be included separately. Class driver module source files must still be added as a separate module in the project's + * makefile if used. + * + * <b>Device Mode</b> + * - Endpoints MUST be allocated in ascending order to ensure that bank corruption does not occur. Ensure that your user application + * allocated endpoints in ascending order - or if your application uses the USB device mode class drivers, ensure that each instance's + * endpoint indexes are not overlapped with other interface's endpoints. + * - The signature for the \ref CALLBACK_USB_GetDescriptor() callback has changed, the \c void** \c const \c DescriptorAddress parameter is + * now \c const \c void** \c const \c DescriptorAddress. Existing applications should update their callback signatures to match this, and + * eliminate any casting of descriptor pointers to a non \c const pointer. + * - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation + * for each class driver for the new class specific descriptor type names. + * - The \c ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \c ENDPOINT_BANKS_SUPPORTED() and now returns the total number of + * banks supported by the given endpoint. Existing code should switch to the new naming scheme, and test that the return value of the + * macro is equal to or greater than 2 to regain the previous functionality. + * - The \c EVENT_USB_Device_UnhandledControlRequest() event is now named \ref EVENT_USB_Device_ControlRequest() and fires before (not after) + * the internal library event handlers. Existing code should rename the event handlers in the user application to match the new event + * name, and should ensure that the new execution order does not affect the application's operation. + * + * <b>Host Mode</b> + * - Pipes MUST be allocated in ascending order to ensure that bank corruption does not occur. Ensure that your user application + * allocated pipes in ascending order - or if your application uses the USB host mode class drivers, ensure that each instance's + * pipe indexes are not overlapped with other interface's pipes. + * - The \c PRNT_Host_SendData() function has been renamed to \ref PRNT_Host_SendString(). Existing applications should simply + * replace all references to the obsolete function name with the new function name. + * - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation + * for each class driver for the new class specific descriptor type names. + * - The Still Image Host class' function prefix has been changed from \c SImage_ to \c SI_, to remain consistent with the rest of the + * driver's enums, type defines and constants. + * + * \section Sec_Migration100807 Migrating from 100513 to 100807 + * + * <b>Non-USB Library Components</b> + * - The Dataflash board driver stub file has changed, as dataflash functions previously located in the internal + * Dataflash driver of the library have now been moved to the individual board files. Existing drivers can + * copy-paste the new functions from the board Dataflash stub driver. + * + * <b>USB Core</b> + * - A new USB driver source file, \c Drivers/USB/LowLevel/Device.c now exists. This source file should be added to all project + * makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables. + * - The \c Drivers/USB/LowLevel/DevChapter9.c source file has moved to \c Drivers/USB/HighLevel/DeviceStandardReq.c - this should + * be updated in all project makefiles, or the makefile should be updated to use the new module source variables. + * - The \c Drivers/USB/LowLevel/HostChapter9.h source file has moved to \c Drivers/USB/HighLevel/HostStandardReq.c - this should + * be updated in all project makefiles, or the makefile should be updated to use the new module source variables. + * - The \c Drivers/USB/LowLevel/LowLevel.c source file has moved to \c Drivers/LowLevel/USBController.c - this should be updated + * in all project makefiles, or the makefile should be updated to use the new module source variables. + * + * <b>Device Mode</b> + * - The \c USB_Device_IsRemoteWakeupSent() macro has been removed, as the remote wakeup request is now fully handled by the + * enhanced \ref USB_Device_SendRemoteWakeup() function. Existing code may now discard any checks to \c USB_Device_IsRemoteWakeupSent(). + * - The \c USB_Device_IsUSBSuspended() macro has been removed, as it is obsolete. Existing code should compare \ref USB_DeviceState + * to see if it the device is in the \ref DEVICE_STATE_Suspended state instead. + * - The \ref CDC_Device_ReceiveByte() function has changed, and now returns a signed 16-bit integer, with -1 indicating no data was + * received. This allows for more efficient coding, as a call to \ref CDC_Device_BytesReceived() is no longer needed if the exact + * number of queued bytes received is not needed. + * + * <b>Host Mode</b> + * - The \ref CDC_Host_ReceiveByte() function has changed, and now returns a signed 16-bit integer, with -1 indicating no data was + * received. This allows for more efficient coding, as a call to \ref CDC_Host_BytesReceived() is no longer needed if the exact + * number of queued bytes received is not needed. + * - The \ref CDC_Host_USBTask() now calls \ref CDC_Host_Flush() automatically, flushing any queued data to the attached device. Manual + * flushing of the interface is no longer needed if the flushes should be in sync with calls to \ref CDC_Host_USBTask(). + * + * \section Sec_Migration100513 Migrating from 100219 to 100513 + * + * <b>Non-USB Library Components</b> + * - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed + * device must respond or the function will abort. + * + * <b>Device Mode</b> + * - The \ref USB_Init() function no longer calls \c sei() to enable global interrupts, as the user application may need + * to perform other initialization before it is ready to handle global interrupts. The user application is now responsible + * for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process + * functions correctly. + * - The \c USBInterrupt.c USB driver source file has been relocated from \c LUFA/Drivers/USB/HighLevel/ to \c LUFA/Drivers/USB/LowLevel. + * Projects must update their makefile SRC values accordingly. + * - The HID Device Class driver's function signature for the \ref CALLBACK_HID_Device_ProcessHIDReport() function has been changed, to + * allow for a new \c ReportType parameter. This new parameter must be added in all user applications using the Device mode HID Class + * Driver, but may be ignored unless Host-to-Device FEATURE HID reports are used. + * + * <b>Host Mode</b> + * - The \ref USB_Init() function no longer calls \c sei() to enable global interrupts, as the user application may need + * to perform other initialization before it is ready to handle global interrupts. The user application is now responsible + * for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process + * functions correctly. + * - The \c USBInterrupt.c USB driver source file has been relocated from \c LUFA/Drivers/USB/HighLevel/ to \c LUFA/Drivers/USB/LowLevel. + * Projects must update their makefile \c SRC values accordingly. + * - The HID Host Class driver's function signature for the \ref HID_Host_SendReportByID() function has been changed, to allow for a new + * ReportType parameter. Existing calls to this function should substitute \c REPORT_ITEM_TYPE_Out as this parameter's value. + * + * \section Sec_Migration100219 Migrating from 091223 to 100219 + * + * <b>Non-USB Library Components</b> + * - Due to some ADC channels not being identical to their ADC MUX selection masks for single-ended conversions on some AVR models, + * the ADC driver now has explicit masks for each of the standard ADC channels (see \ref Group_ADC). These masks should be used + * when calling the ADC functions to ensure proper operation across all AVR models. Note that the \ref ADC_SetupChannel() function + * is an exception, and should always be called with a channel number rather than a channel mask. + * + * <b>Host Mode</b> + * - The MIDI Host Class driver send and receive routines now operate on packed events, where multiple MIDI events may be + * packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send + * pipe bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually + * flush the queued event(s) to the device by calling \ref MIDI_Host_Flush(). + * - The \ref Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address + * is set to denote IN endpoints. If the previous functionality where the direction is to be discounted is required, mask the endpoint + * address against the \ref PIPE_EPNUM_MASK token before calling \ref Pipe_IsEndpointBound(). + * + * <b>Device Mode</b> + * - The MIDI Device Class driver send and receive routines now operate on packed events, where multiple MIDI events may be + * packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send + * endpoint bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually + * flush the queued event(s) to the host by calling \ref MIDI_Device_Flush(). + * + * \section Sec_Migration091223 Migrating from 091122 to 091223 + * + * <b>Host Mode</b> + * - The Still Image Host Class driver \ref SI_Host_USBTask() and \ref SI_Host_ConfigurePipes() functions were misnamed, and are + * now named \c SImage_Host_USBTask() and \c SImage_Host_ConfigurePipes() respectively. + * - The \c HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to \ref HOST_SENDCONTROL_DeviceDisconnected to be in + * line with the rest of the library error codes. + * - The HID Parser item usages no longer contain separate minimum and maximum values, as this was a violation of the HID + * specification. Instead, the values are distributed evenly across each item as its usage value, to ensure that all items + * can be distinguished from one-another. + * + * <b>Device Mode</b> + * - The \ref CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new \c ReportType parameter to + * indicate the report type to generate. Existing applications may simply add and ignore this additional parameter. + * + * \section Sec_Migration091122 Migrating from 090924 to 091122 + * + * <b>Host Mode</b> + * - The \c HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow + * - The \ref CALLBACK_HIDParser_FilterHIDReportItem() HID Parser callback now passes a complete \ref HID_ReportItem_t to the + * user application, instead of just its attributes. + * - The \c USB_GetDeviceConfigDescriptor() function was incorrectly named and is now called \ref USB_Host_GetDeviceConfigDescriptor(). + * + * \section Sec_Migration090924 Migrating from 090810 to 090924 + * + * <b>Non-USB Library Components</b> + * - The \c ADC_Off() function has been renamed to \c ADC_ShutDown() to be consistent with the rest of the library. + * - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See + * the \ref SPI_Init() function documentation for more details + * - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a + * call to \ref SPI_Init() before using the Dataflash driver + * + * <b>Host Mode</b> + * - The \c USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to + * preallocate the largest allowable buffer, and pass the size of the buffer to the function. This allows for a single + * call to the function to retrieve, size check and validate the Configuration Descriptor rather than having the user + * application perform these intermediary steps. + * - The HID report parser now requires a mandatory callback in the user code, to filter only the items the application + * is interested in into the processed HID report item structure to save RAM. See \ref CALLBACK_HIDParser_FilterHIDReportItem(). + * - The HID report parser now always parses FEATURE and always ignores constant-data items - the \c HID_ENABLE_FEATURE_PROCESSING + * and \c HID_INCLUDE_CONSTANT_DATA_ITEMS compile time tokens now have no effect. + * - The \c USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate \c USB_Descriptor_* + * and \c USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in + * the one project. For existing projects using the standardized names, change all code to use the \c USB_StdDescriptor_* variants. + * + * <b>Device Mode</b> + * - The \c USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate \c USB_Descriptor_* + * and \c USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in + * the one project. For existing projects using the standardized names, change all code to use the \c USB_StdDescriptor_* variants. + * + * \section Sec_Migration090810 Migrating from 090605 to 090810 + * + * <b>All</b> + * - The "Simple Scheduler" has been <i>deprecated</i>, as it was little more than an abstracted loop and caused much confusion. + * User applications using the scheduler should switch to regular loops instead. The scheduler code will be removed in a future + * release. + * - The "Dynamic Memory Block Allocator" has been removed, as it was unused in (and unrelated to) the LUFA library and never + * used in user applications. + * + * <b>Non-USB Library Components</b> + * - The \c ATTR_NOINLINE function attribute macro has been renamed to \ref ATTR_NO_INLINE to be in line with the rest of the function attribute + * macro names. + * + * <b>Library Demos</b> + * - Most demos now have a corresponding Class Driver implementation, which uses the new internal library class drivers for the standard + * USB classes. This allows for more rapid device and host development, and so should be used in preference to the low level APIs where + * possible so that fixes to the class drivers propagate to all applications which use them automatically with each new LUFA release. + * + * <b>Host Mode</b> + * - The \c HIDParser.c module has moved from \c LUFA/Drivers/USB/Class/ to \c LUFA/Drivers/USB/Class/Host/. + * - The \c USB_GetDeviceConfigDescriptor() function now requires the desired configuration index within the device as its first + * parameter, to add support for multi-configuration devices. Existing code should use a configuration index of 1 to indicate the + * first configuration descriptor within the device. + * - The non-standard "Ready" host state has been removed. Existing \ref HOST_STATE_Configured code should be moved to the end of + * the existing \ref HOST_STATE_Addressed state, and the existing HOST_STATE_Ready state code should be moved to the \ref HOST_STATE_Configured + * state. + * - The \c USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_HostState explicitly to ensure the host is + * in the desired state instead. + * - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode + * events. See the \ref Group_Events page for details on the new event names and firing conditions. + * + * <b>Device Mode</b> + * - The \ref CALLBACK_USB_GetDescriptor() function now takes an extra parameter to specify the descriptor's memory space so that + * descriptors in mixed memory spaces can be used. The previous functionality can be returned by defining the \c USE_FLASH_DESCRIPTORS + * token in the project makefile to fix all descriptors into FLASH space and remove the extra function parameter. + * - The \c USB_IsSuspended global has been removed - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead. + * - The \c USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_DeviceState explicitly to ensure the device + * is in the desired state instead. + * - The VBUS events have been removed, as they are already exposed to the user via the \c USB_Connect and \c USB_Disconnect events. + * - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode + * events. See the \ref Group_Events page for details on the new event names and firing conditions. + * + * \section Sec_Migration090605 Migrating from 090510 to 090605 + * + * <b>Device Mode</b> + * - Support for non-control data endpoint interrupts has been dropped due to many issues in the implementation. All existing + * projects using interrupts on non-control endpoints should switch to polling. For control interrupts, the library can + * manage the control endpoint via interrupts automatically by compiling with the \c INTERRUPT_CONTROL_ENDPOINT token defined. + * - The \c DESCRIPTOR_ADDRESS() macro has been removed. User applications should use normal casts to obtain a descriptor's memory + * address. + * - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See + * \ref Group_Events for new API details. + * - The \c STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular + * function signatures of a function accepting no arguments and returning a \c uint8_t value. + * - The \c Event_DeviceError() event no longer exists, as its sole caller (unlinked \c USB_GetDescriptor() function) now produces a + * compilation error rather than a runtime error. The \c StdDescriptors.c file no longer exists as a result, and should be removed + * from project makefiles. + * - The \c USB_GetDescriptor() function has been renamed to \ref CALLBACK_USB_GetDescriptor() to be in line with the new \c CALLBACK_ + * function prefixes for functions which <i>must</i> be implemented in the user application. + * + * <b>Host Mode</b> + * - Support for non-control data pipe interrupts has been dropped due to many issues in the implementation. All existing + * projects using interrupts on non-control pipes should switch to polling. + * - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See + * \ref Group_Events for new API details. + * - The \c STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular + * function signatures of a function accepting no arguments and returning a \c uint8_t value. + * - The \c DESCRIPTOR_COMPARATOR() macro has been removed. User applications should replace all instances of the macro with + * regular function signatures of a function accepting a void pointer to the descriptor to test, and returning a \c uint8_t value. + * + * \section Sec_Migration090510 Migrating from 090401 to 090510 + * + * <b>All</b> + * - The \c ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all + * \c BUTTLOADTAG() elements, or download and extract \c ButtLoadTag.h header from the ButtLoad project. + * - The \c Drivers/AT90USBXXX/ directory has been renamed to \c Drivers/Peripheral/. + * - The \c Serial_Stream driver has been renamed to \c SerialStream to remain consistent with the rest of the library naming scheme. + * - The HWB driver has changed to the \c Buttons driver. See the board Buttons driver documentation for the new API. + * + * <b>Dual Role Mode</b> + * - The \c USB_PowerOnFail event has been renamed to \c USB_InitFailure. + * - The functions in \c OTG.h have been renamed to remain more consistent with the library API. See the functions in \c OTG.h for more + * details. + * + * <b>Device Mode</b> + * - The \c Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the \ref Endpoint_ClearIN(), \ref Endpoint_ClearOUT() + * macros. See \c Endpoint.h documentation for more details on the new endpoint management macros. + * - The \c Endpoint_ReadWriteAllowed() macro has been renamed to \ref Endpoint_IsReadWriteAllowed() to be more consistent with the rest of + * the API naming scheme. + * - The \c Endpoint_IsSetupINReady() and \c Endpoint_IsSetupOUTReceived() macros have been renamed to \ref Endpoint_IsINReady() and + * \ref Endpoint_IsOUTReceived() respectively. + * - The \c Endpoint_IsSetupReceived() macro has been renamed to \ref Endpoint_IsSETUPReceived(). + * - The \c Endpoint_ClearSetupReceived() macro has been renamed to \ref Endpoint_ClearSETUP(). + * - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as \c Endpoint_Read_Word()) have + * been removed for clarity. Existing projects should use the \c _LE suffix on such calls to use the explicit Little Endian versions. + * - The \c USB_UnhandledControlPacket event no longer has any parameters. User code should no longer attempt to read in the remainder of + * the Control Request header as all Control Request header data is now preloaded by the library and made available in the + * USB_ControlRequest structure. + * - The \c FEATURELESS_CONTROL_ONLY_DEVICE token has been renamed to \c CONTROL_ONLY_DEVICE. + * - The \c STATIC_ENDPOINT_CONFIGURATION is no longer applicable as the library will apply this optimization when appropriate automatically. + * - The values of the \ref Endpoint_Stream_RW_ErrorCodes_t and \ref Endpoint_ControlStream_RW_ErrorCodes_t enums have had the \c ERROR_ portion + * of their names removed. + * + * <b>Host Mode</b> + * - The \ref USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0) to allow it to be used on + * other control type pipes. Care should be taken to ensure that the Control pipe is always selected before the function is called + * in existing projects where the Control pipe is to be operated on. + * - The USB Host management task now saves and restores the currently selected pipe before and after the task runs. Projects no longer + * need to manage this manually when calling the USB management task. + * - The \c Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See + * Pipe.h documentation for more details on the new pipe management macros. + * - The \c Pipe_ReadWriteAllowed() macro has been renamed to \ref Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API + * naming scheme. + * - The \c Pipe_IsSetupINReceived() and \c Pipe_IsOutReady() macros have been renamed to \ref Pipe_IsINReceived() and \ref Pipe_IsOUTReady() + * respectively. + * - The new \ref Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous \c Pipe_ClearSetupOUT() macro. + * - The \c Pipe_IsSetupSent() macro has been renamed to \ref Pipe_IsSETUPSent(). + * - The \c Pipe_ClearSetupSent() macro is no longer applicable and should be removed. + * - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as \c Pipe_Read_Word()) have + * been removed for clarity. Existing projects should use the \c _LE suffix on such calls to use the explicit Little Endian versions. + * - The \c Host_IsResetBusDone() macro has been renamed to \c Host_IsBusResetComplete(). + * - The \c Pipe_Ignore_Word() and \c Pipe_Ignore_DWord() functions have been renamed to \c Pipe_Discard_Word() and \c Pipe_Discard_DWord() + * to remain consistent with the rest of the pipe API. + * - It is no longer needed to manually include the headers from \c LUFA/Drivers/USB/Class, as they are now included along with the rest + * of the USB headers when \c LUFA/Drivers/USB/USB.h is included. + * - Functions in the \c ConfigDescriptor.h header file no longer have \c Host_ as part of their names. + * - The \c ProcessHIDReport() has been renamed to \ref USB_ProcessHIDReport(), \c GetReportItemInfo() has been renamed to \ref USB_GetHIDReportItemInfo() + * and \c SetReportItemInfo() has been renamed to \ref USB_GetHIDReportItemInfo(). + * - The values of the \ref DSearch_Return_ErrorCodes_t and \ref DSearch_Comp_Return_ErrorCodes_t enums have had their respective \c Descriptor_Search + * and \c Descriptor_Search_Comp prefixes changed to all caps. + * - The \c USB_HostRequest global has been renamed to \ref USB_ControlRequest, and is used in Device mode also. The \c USB_Host_Request_Header_t + * structure type has been renamed to \ref USB_Request_Header_t. + * - The values of the \ref Pipe_Stream_RW_ErrorCodes_t enum have had the \c ERROR_ portion of their names removed. + * + * \section Sec_Migration090401 Migrating from 090209 to 090401 + * + * <b>All</b> + * - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant \c F_USB, + * defined in the project makefile and passed to the compiler via the -D switch. + * - The makefile EEPROM programming targets for FLIP and dfu-programmer no longer program in the FLASH data in addition to the + * EEPROM data into the device. If both are to be programmed, both the EEPROM and FLASH programming targets must be called. + * - As the avr-libc macro has been corrected in recent avr-libc distributions, the \c SetSystemClockPrescaler() macro has been removed. + * Include \c <avr/power.h> and call \c clock_prescale_set(clock_div_1); instead on recent avr-libc distributions. + * + * <b>Library Demos</b> + * - The USBtoSerial demo now discards all data when not connected to a host, rather than buffering it for later transmission. + * + * <b>Non-USB Library Components</b> + * - The \c ATTR_ALWAYSINLINE function attribute macro has been renamed to \ref ATTR_ALWAYS_INLINE. + * - Custom board Dataflash drivers now require the implementation of \ref Dataflash_SelectChipFromPage() and \ref Dataflash_SendAddressBytes(). + * + * <b>Device Mode</b> + * - The \c NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to \c FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded + * to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the + * \c NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the \c FEATURELESS_CONTROL_ONLY_DEVICE token with no further + * modifications required. + * + * \section Sec_Migration090209 Migrating from 081217 to 090209 + * + * <b>Device Mode</b> + * - The \c ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of \c ENDPOINT_TOTAL_ENDPOINTS. + * - The \c USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user + * makefile if desired to restore the previous 50ms timeout. + * + * <b>Host Mode</b> + * - The \c PIPE_MAX_ENDPOINTS constant has been renamed to the more appropriate name of \c PIPE_TOTAL_ENDPOINTS. + * - The \c USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user + * makefile if desired to restore the previous 50ms timeout. + * - The \c USB_DeviceEnumerationFailed event now contains a second \c SubErrorCode parameter, giving the error code of the function + * which failed. + * - The \c HID_PARSE_Sucessful enum member constant name has been corrected to \ref HID_PARSE_Successful. + * + * <b>Non-USB Library Components</b> + * - The previous \c SPI_SendByte() functionality is now located in \ref SPI_TransferByte(). \ref SPI_SendByte() now discards the return byte + * for speed, to compliment the new \ref SPI_ReceiveByte() function. If bidirectional SPI transfers are required, calls to \ref SPI_SendByte() + * should be changed to \ref SPI_TransferByte(). + * - The serial driver now sets the Tx line as an output explicitly, and enables the pull-up of the Rx line. + * - The \ref Serial_Init() and \c SerialStream_Init() functions now take a second \c DoubleSpeed parameter, which indicates if the USART + * should be initialized in double speed mode - useful in some circumstances for attaining baud rates not usually possible at the given AVR + * clock speed. + * + * \section Sec_Migration171208 Migrating from V1.5.3 to 081217 + * + * <b>All</b> + * - The MyUSB project name has been changed to LUFA (Lightweight Framework for USB AVRs). All references to MyUSB, including macro names, + * have been changed to LUFA. + * + * <b>Library Demos</b> + * - The ReconfigureUSART() routine in the USBtoSerial demo was not being called after new line encoding + * parameters were set by the host. Projects built on the USBtoSerial code should update to the latest version. + * - The HID Parser now supports multiple report (on a single endpoint) HID devices. The MouseHostWithParser and + * KeyboardHostWithPaser demos use the updated API functions to function correctly on such devices. Projects + * built on either "WithParser" demo should update to the latest code. + * - The RNDIS demo TCP stack has been modified so that connections can be properly closed. It is still not + * recommended that the MyUSB RNDIS demo TCP/IP stack be used for anything other than demonstration purposes, + * as it is neither a full nor a standards compliant implementation. + * + * <b>Non-USB Library Components</b> + * - The Serial_IsCharReceived() macro has been changed to the correct spelling of Serial_IsCharReceived() in Serial.h. + * + * <b>Device Mode</b> + * - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask + * to be used in the Options parameter of the USB_Init() function. + * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is + * currently initialized. + * - Interrupts are now disabled when processing control requests, to avoid problems with interrupts causing the library + * or user request processing code to exceed the strict USB timing requirements on control transfers. + * - The USB Reset event now resets and disables all device endpoints. If user code depends on endpoints remaining configured + * after a Reset event, it should be altered to explicitly re-initialize all user endpoints. + * - The prototype for the GetDescriptor function has been changed, as the return value was redundant. The function now + * returns the size of the descriptor, rather than passing it back via a parameter, or returns NO_DESCRIPTOR if the specified + * descriptor does not exist. + * - The NO_DESCRIPTOR_STRING macro has been renamed NO_DESCRIPTOR, and is now also used as a possible return value for the + * GetDescriptor function. + * + * <b>Host Mode</b> + * - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask + * to be used in the Options parameter of the USB_Init() function. + * - The HID report parser now supports multiple Report IDs. The HID report parser GetReportItemInfo() and + * SetReportItemInfo() routines now return a boolean, set if the requested report item was located in the + * current report. If sending a report to a multi-report device, the first byte of the report is automatically + * set to the report ID of the given report item. + * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is + * currently initialized. + * + * \section Sec_Migration152 Migrating from V1.5.2 to V1.5.3 + * + * <b>Library Demos</b> + * - Previously, all demos contained a serial number string descriptor, filled with all zeros. A serial number + * string is required in Mass Storage devices, or devices which are to retain settings when moved between + * ports on a machine. As people were not changing the serial number value, this was causing conflicts and so + * the serial number descriptor has been removed from all but the Mass Storage demo, which requires it. + * - The AudioOut and AudioIn demos did not previously silence their endpoints when the host has deactivated + * them. Projects built upon either demo should upgrade to the latest code. + * - The FEATURE_ENDPOINT macro has been renamed FEATURE_ENDPOINT_HALT, and is now correctly documented. + * - The MassStoreHost demo contained errors which caused it to lock up randomly on certain devices. Projects built + * on the MassStoreDemo code should update to the latest version. + * - The Interrupt type endpoint in the CDC based demos previously had a polling interval of 0x02, which caused + * problems on some Linux systems. This has been changed to 0xFF, projects built on the CDC demos should upgrade + * to the latest code. + * - The HID keyboard and mouse demos were not previously boot mode compatible. To enable boot mode support, projects + * built on the keyboard or mouse demos (or derivatives) should upgrade to the latest code. + * - The Mass Storage demo was not previously standards compliant. Projects built on the Mass Storage demo should + * upgrade to the latest code. + * - The USART was not being reconfigured after the host sent new encoding settings in the USBtoSerial demo. This was + * previously discovered and fixed, but the change was lost. Projects built on the USBtoSerial demo should update + * to the latest code. + * + * <b>Device Mode</b> + * - The endpoint non-control stream functions now have a default timeout of 50ms between packets in the stream. + * If this timeout is exceeded, the function returns the new ENDPOINT_RWSTREAM_ERROR_Timeout error value. The + * timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired + * timeout duration in ms. + * - Rather than returning fixed values, the flags indicating if the device has Remote Wakeup currently enabled + * and/or is self-powered are now accessed and set through the new USB_RemoteWakeupEnabled and + * USB_CurrentlySelfPowered macros. See the DevChapter9.h documentation for more details. + * - All endpoint stream functions now require an extra Callback function parameter. Existing code may be updated + * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing + * the token NO_STREAM_CALLBACKS to the compiler using the -D switch. + * + * <b>Host Mode</b> + * - The pipe non-control stream functions now have a default timeout of 50ms between packets in the stream. + * If this timeout is exceeded, the function returns the new PIPE_RWSTREAM_ERROR_Timeout error value. The + * timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired + * timeout duration in ms. + * - CollectionPath_t has been renamed to HID_CollectionPath_t to be more in line with the other HID parser structures. + * - All pipe stream functions now require an extra Callback function parameter. Existing code may be updated + * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing + * the token NO_STREAM_CALLBACKS to the compiler using the -D switch. + * + * \section Sec_Migration151 Migrating from V1.5.1 to V1.5.2 + * + * <b>Library Demos</b> + * - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations + * of the RNDIS specification, which had non-standard behaviour. Projects built upon the demo should upgrade + * to the latest code. + * - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where + * possible any existing devices upgrade to the latest bootloader code. + * + * \section Sec_Migration150 Migrating from V1.5.0 to V1.5.1 + * + * <b>Library Demos</b> + * - The USBtoSerial demo was broken in the 1.5.0 release, due to incorrect register polling in place of the + * global "Transmitting" flag. The change has been reverted in this release. Projects built upon the demo + * should upgrade to the latest code. + * - The HID class demos did not implement the mandatory GetReport HID class request. Projects built upon the HID + * demos should upgrade to the latest code. + * - The HID class demos incorrectly reported themselves as boot-protocol enabled HID devices in their descriptors. + * Projects built upon the HID demos should upgrade to the latest code. + * - The MIDI device demo had incorrect AudioStreaming interface descriptors. Projects built upon the MIDI demo + * should upgrade to the latest code. + * - The AudioOut demo did not correctly tristate the speaker pins when USB was disconnected, wasting power. + * Projects built upon the AudioOut demo should upgrade to the latest code. + * + * \section Sec_Migration141 Migrating from V1.4.1 to V1.5.0 + * + * <b>Library Demos</b> + * - Previous versions of the library demos had incorrectly encoded BCD version numbers in the descriptors. To + * avoid such mistakes in the future, the VERSION_BCD macro has been added to StdDescriptors.h. Existing + * projects should at least manually correct the BCD version numbers, or preferably update the descriptors to + * encode the version number in BCD format using the new macro. + * - The mandatory GetReport class-specific request was accidentally omitted from previous versions of the demos + * based on the Human Interface Device (HID) class. This has been corrected, and any user projects based on the + * HID demos should also be updated accordingly. + * - The CDC demos now correctly send an empty packet directly after a full packet, to end the transmission. + * Failure to do this on projects which always or frequently send full packets will cause buffering issues on + * the host OS. All CDC user projects are advised to update their transmission routines in the same manner as + * the library CDC demos. + * - The previous interrupt-driven Endpoint/Pipe demos did not properly save and restore the currently selected + * Endpoint/Pipe when the ISR fired. This has been corrected - user projects based on the interrupt driven + * demos should also update to properly save and restore the selected Endpoint/Pipe. + * + * <b>Non-USB Library Components</b> + * - The Atomic.h and ISRMacro.h header files in MyUSB/Common have been removed, as the library is now only + * compatible with avr-libc library versions newer than the time before the functionality of the deleted + * headers was available. + * + * <b>Device Mode</b> + * - The GetDescriptor function (see StdDescriptors.h) now has a new prototype, with altered parameter names and + * functions. Existing projects will need to update the GetDescriptor implementation to reflect the new API. + * The previously split Type and Index parameters are now passed as the original wValue parameter to the + * function, to make way for the USB specification wIndex parameter which is <i>not</i> the same as the + * previous Index parameter. + * - The USB_UnhandledControlPacket event (see Events.h) now has new parameter names, to be in line with the + * official USB specification. Existing code will need to be altered to use the new parameter names. + * - The USB_CreateEndpoints event (see Events.h) has been renamed to USB_ConfigurationChanged, which is more + * appropriate. It fires in an identical manner to the previously named event, thus the only change to be made + * is the event name itself in the user project. + * - The USB_Descriptor_Language_t structure no longer exists in StdDescriptors.h, as this was a + * pseudo-descriptor modeled on the string descriptor. It is replaced by the true USB_Descriptor_String_t type + * descriptor as indicated in the USB specification, thus all device code must be updated accordingly. + * - The names of several Endpoint macros have been changed to be more consistent with the rest of the library, + * with no implementation changes. This means that existing code can be altered to use the new macro names + * with no other considerations required. See Endpoint.h for the new macro names. + * - The previous version of the MassStorage demo had an incorrect value in the SCSI_Request_Sense_Response_t + * structure named SenseData in SCSI.c which caused some problems with some hosts. User projects based on this + * demo should correct the structure value to maintain compatibility across multiple OS platforms. + * - By default, the descriptor structures use the official USB specification names for the elements. Previous + * versions of the library used non-standard (but more verbose) names, which are still usable in the current + * and future releases when the correct compile time option is enabled. See the StdDescriptors.h file + * documentation for more details. + * + * <b>Host Mode</b> + * - The USB_Host_Request_Header_t structure in HostChapter9.h (used for issuing control requests) has had its + * members renamed to the official USB specification names for requests. Existing code will need to be updated + * to use the new names. + * - The names of several Pipe macros have been changed to be more consistent with the rest of the library, + * with no implementation changes. This means that existing code can be altered to use the new macro names + * with no other considerations required. See Pipe.h for the new macro names. + * - By default, the descriptor structures use the official USB specification names for the elements. Previous + * versions of the library used non-standard (but more verbose) names, which are still usable in the current + * and future releases when the correct compile time option is enabled. See the StdDescriptors.h file + * documentation for more details. + * - The names of the macros in Host.h for controlling the SOF generation have been renamed, see the Host.h + * module documentation for the new macro names. + * + * <b>Dual Role Mode</b> + * - The OTG.h header file has been corrected so that the macros now perform their stated functions. Any existing + * projects using custom headers to fix the broken OTG header should now be altered to once again use the OTG + * header inside the library. + * - The USB_DeviceEnumerationComplete event (see Events.h) now also fires in Device mode, when the host has + * finished enumerating the device. Projects relying on the event only firing in Host mode should be updated + * so that the event action only occurs when the USB_Mode global is set to USB_MODE_HOST. + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/OSDrivers.txt b/lib/lufa/LUFA/DoxygenPages/OSDrivers.txt new file mode 100644 index 0000000000..4823c5b089 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/OSDrivers.txt @@ -0,0 +1,111 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_OSDrivers Operating System Drivers + * + * Most of the USB classes supported by LUFA are also supported natively in + * most operating systems, without extra drivers being required. However, in + * some cases, a driver file is required in order for the device to enumerate + * and function correctly. + * + * \section Sec_OSClassSupport Operating System USB Class Support + * The table below lists the supported LUFA USB classes, and their associated + * <i>native</i> support on modern operating systems. + * + * <table> + * <tr> + * <th width="200px">USB Class</th> + * <th width="150px">Android</th> + * <th width="150px">Windows</th> + * <th width="150px">Linux</th> + * <th width="150px">OS X</th> + * </tr> + * <tr> + * <td>Android Open Accessory</td> + * <td>2.3.4+</td> + * <td>N/A</td> + * <td>N/A</td> + * <td>N/A</td> + * </tr> + * <tr> + * <td>Audio 1.0</td> + * <td>N/A</td> + * <td>XP+</td> + * <td>2.6.?+</td> + * <td>10.?+</td> + * </tr> + * <tr> + * <td>CDC-ACM</td> + * <td>N/A</td> + * <td>XP+</td> + * <td>2.6.?+</td> + * <td>10.?+</td> + * </tr> + * <tr> + * <td>HID</td> + * <td>3.?+</td> + * <td>XP+</td> + * <td>2.6.?+</td> + * <td>10.?+</td> + * </tr> + * <tr> + * <td>MIDI</td> + * <td>N/A</td> + * <td>XP+</td> + * <td>2.6.?+</td> + * <td>10.?+</td> + * </tr> + * <tr> + * <td>Mass Storage</td> + * <td>N/A</td> + * <td>XP+</td> + * <td>2.6.?+</td> + * <td>10.?+</td> + * </tr> + * <tr> + * <td>Printer</td> + * <td>N/A</td> + * <td>XP+</td> + * <td>2.6.?+</td> + * <td>10.?+</td> + * </tr> + * <tr> + * <td>RNDIS</td> + * <td>N/A</td> + * <td>XP+</td> + * <td>2.6.?+</td> + * <td>N/A</td> + * </tr> + * <tr> + * <td>Still Image</td> + * <td>N/A</td> + * <td>XP+</td> + * <td>2.6.?+</td> + * <td>10.?+</td> + * </tr> + * </table> + * + * \section Sec_WinINFTemplates Windows INF Drivers + * Windows uses INF driver files to associate a USB device of a specific class, + * VID/PID ID pair, Windows Compatibility ID or other characteristic to a kernel + * driver. In most cases these files are build into the operating system, and + * no special user action or driver files are required for a device using a + * standard USB class to enumerate. However, for some classes, a specific INF + * driver must be created and given to the operating system for the device to + * enumerate. + * + * Those USB classes requiring a custom INF driver file in Windows are listed + * below, along with a basic INF template for each class. + * + * \subsection SSec_WinINF_CDC Windows CDC INF Template + * This template is required for all CDC-ACM devices on Windows XP or newer. + * \verbinclude "WindowsINF/LUFA CDC-ACM.inf" + * + * \subsection SSec_WinINF_RNDIS Windows RNDIS INF Template + * This template is required for all RNDIS devices on Windows XP or newer. + * \verbinclude "WindowsINF/LUFA RNDIS.inf" + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/ProgrammingApps.txt b/lib/lufa/LUFA/DoxygenPages/ProgrammingApps.txt new file mode 100644 index 0000000000..653b4ad04b --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/ProgrammingApps.txt @@ -0,0 +1,27 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_ProgrammingApps Programming an Application into a USB AVR + * + * Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your + * application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the + * reprogramming of an AVR device must be performed using a special piece of programming hardware, through one of the + * supported AVR programming protocols - ISP, HVSP, HVPP, JTAG, dW or PDI. This can be done through a custom programmer, + * a third party programmer, or an official Atmel AVR tool - for more information, see the <a>atmel.com</a> website. + * + * Alternatively, you can use the bootloader. From the Atmel factory, each USB AVR comes preloaded with the Atmel + * DFU (Device Firmware Update) class bootloader, a small piece of AVR firmware which allows the remainder of the + * AVR to be programmed through a non-standard interface such as the serial USART port, SPI, or (in this case) USB. + * Bootloaders have the advantage of not requiring any special hardware for programming, and cannot usually be erased + * or broken without an external programming device. They have disadvantages however; they cannot change the fuses of + * the AVR (special configuration settings that control the operation of the chip itself) and a small portion of the + * AVR's FLASH program memory must be reserved to contain the bootloader firmware, and thus cannot be used by the + * loaded application. + * + * If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation. + * Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible) + * alternative exists called "dfu-programmer". + */ diff --git a/lib/lufa/LUFA/DoxygenPages/SoftwareBootloaderJump.txt b/lib/lufa/LUFA/DoxygenPages/SoftwareBootloaderJump.txt new file mode 100644 index 0000000000..f8c2523d7b --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/SoftwareBootloaderJump.txt @@ -0,0 +1,71 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_SoftwareBootloaderStart Entering the Bootloader via Software + * + * A common requirement of many applications is the ability to jump to the programmed bootloader of a chip + * on demand, via the code's firmware (i.e. not as a result of any physical user interaction with the + * hardware). This might be required because the device does not have any physical user input, or simply + * just to streamline the device upgrade process on the host PC. + * + * The following C code snippets may be used to enter the bootloader upon request by the user application. + * By using the watchdog to physically reset the controller, it is ensured that all system hardware is + * completely reset to their defaults before the bootloader is run. This is important; since bootloaders + * are written to occupy a very limited space, they usually make assumptions about the register states based + * on the default values after a hard-reset of the chip. + * + * \section Sec_SoftareBootAVR8 AVR8 Architecture + * The following software bootloader jump code is written for the AVR8 architecture. + * + * \code + * #include <avr/wdt.h> + * #include <avr/io.h> + * #include <util/delay.h> + * + * #include <LUFA/Common/Common.h> + * #include <LUFA/Drivers/USB/USB.h> + * + * uint32_t Boot_Key ATTR_NO_INIT; + * + * #define MAGIC_BOOT_KEY 0xBADCAFE5 + * #define BOOTLOADER_START_ADDRESS ((FLASH_SIZE_BYTES - BOOTLOADER_SEC_SIZE_BYTES) >> 1) + * + * void Bootloader_Jump_Check(void) ATTR_INIT_SECTION(3); + * void Bootloader_Jump_Check(void) + * { + * // If the reset source was the bootloader and the key is correct, clear it and jump to the bootloader + * if ((MCUSR & (1 << WDRF)) && (Boot_Key == MAGIC_BOOT_KEY)) + * { + * Boot_Key = 0; + * ((void (*)(void))BOOTLOADER_START_ADDRESS)(); + * } + * } + * + * void Jump_To_Bootloader(void) + * { + * // If USB is used, detach from the bus and reset it + * USB_Disable(); + * + * // Disable all interrupts + * cli(); + * + * // Wait two seconds for the USB detachment to register on the host + * Delay_MS(2000); + * + * // Set the bootloader key to the magic value and force a reset + * Boot_Key = MAGIC_BOOT_KEY; + * wdt_enable(WDTO_250MS); + * for (;;); + * } + * \endcode + * + * Note that the bootloader magic key can be any arbitrary value. The <em>FLASH_SIZE_BYTES</em> and + * <em>BOOTLOADER_SEC_SIZE_BYTES</em> tokens should be replaced with the total flash size of the AVR + * in bytes, and the allocated size of the bootloader section for the target AVR. + * + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/Style/Footer.htm b/lib/lufa/LUFA/DoxygenPages/Style/Footer.htm new file mode 100644 index 0000000000..a72c5bdd24 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/Style/Footer.htm @@ -0,0 +1,35 @@ +<!--BEGIN GENERATE_TREEVIEW--> + <div id="nav-path" class="navpath"><!-- id is needed for treeview function! --> + <ul> + <li class="footer" style="float:left !important;"> + $generatedby + <a href="http://www.doxygen.org/index.html"> + <img class="footer" src="$relpath$doxygen.png" alt="doxygen"/> + </a> + $doxygenversion + </li> + + <li class="footer"> + <a href="http://www.lufa-lib.org" title="LUFA Project Page">LUFA Project Page</a> | <a href="http://www.lufa-lib.org/support" title="LUFA Support List">Support Mailing List</a> | <a href="http://www.lufa-lib.org/donate" title="Donate to Support LUFA">Donate</a> | <a href="http://www.fourwalledcubicle.com" title="Four Walled Cubicle Website">Four Walled Cubicle</a> - LUFA, the Lightweight USB Framework for AVRs + </li> + </ul> + </div> +<!--END GENERATE_TREEVIEW--> +<!--BEGIN !GENERATE_TREEVIEW--> + <hr class="footer"/> + <div class="footer"> + <span style="float: left;"> + $generatedby + <a href="http://www.doxygen.org/index.html"> + <img class="footer" src="$relpath$doxygen.png" alt="doxygen"/> + </a> + $doxygenversion + </span> + + <span style="margin-right: 20px; float: right;"> + <a href="http://www.lufa-lib.org" title="LUFA Project Page">LUFA Project Page</a> | <a href="http://www.lufa-lib.org/support" title="LUFA Support List">Support Mailing List</a> | <a href="http://www.lufa-lib.org/donate" title="Donate to Support LUFA">Donate</a> | <a href="http://www.fourwalledcubicle.com" title="Four Walled Cubicle Website">Four Walled Cubicle</a> - LUFA, the Lightweight USB Framework for AVRs + </span> + </div> +<!--END !GENERATE_TREEVIEW--> + </body> +</html>
\ No newline at end of file diff --git a/lib/lufa/LUFA/DoxygenPages/Style/Style.css b/lib/lufa/LUFA/DoxygenPages/Style/Style.css new file mode 100644 index 0000000000..933215546f --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/Style/Style.css @@ -0,0 +1,93 @@ +/* ============================= */ +/* Page Header Formattings */ +/* ============================= */ +#titlearea { + background-color:#E1E7F4; + background-image:url('nav_f.png'); + background-repeat:repeat-x; + color:#20335A; + font-weight:bold; + text-shadow:0 1px 1px rgba(255, 255, 255, 0.9); +} + +#projectlogo { + padding-left: 10px; +} + +/* ============================= */ +/* General Text Formattings */ +/* ============================= */ +body,table,div,p,dl { + font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif; + font-size:13px; + line-height:1.3; +} + +div.header, div.contents p { + padding-left:12px; +} + +/* ============================= */ +/* API Documentation Formattings */ +/* ============================= */ +div.contents table.memberdecls, .paramname { + font-family:Consolas, Monaco, courier, sans-serif; + font-size:105%; + padding-right:20px; +} + +/* ============================= */ +/* HTML Heading Formattings */ +/* ============================= */ +h1, h2, h3, h4 { + font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif; +} + +h1 { + font-size:25px; + margin-bottom:10px; +} + +h2 { + color:#42657B; + font-size:17px; +} + +h3 { + font-size:15px; +} + +h4 { + font-size:13px; +} + +/* ============================= */ +/* Code Snippet Formattings */ +/* ============================= */ +span.keyword { + color:#008000; +} + +span.keywordtype { + color:#604020; +} + +span.keywordflow { + color:#e08000; +} + +span.comment { + color:#008000; +} + +span.preprocessor { + color:#806020; +} + +span.stringliteral { + color:#002080; +} + +span.charliteral { + color:#008080; +} diff --git a/lib/lufa/LUFA/DoxygenPages/VIDAndPIDValues.txt b/lib/lufa/LUFA/DoxygenPages/VIDAndPIDValues.txt new file mode 100644 index 0000000000..8b17220445 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/VIDAndPIDValues.txt @@ -0,0 +1,199 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_VIDPID VID and PID values + * + * \section Sec_VIDPID_Allocations VID and PID Allocations + * The LUFA library uses VID/PID combinations generously donated by Atmel. The following VID/PID combinations + * are used within the LUFA demos, and thus may be re-used by derivations of each demo. Free PID values may be + * used by future LUFA demo projects. + * + * <b>These VID/PID values should not be used in commercial designs under any circumstances.</b> Private projects + * may use the following values freely, but must accept any collisions due to other LUFA derived private projects + * sharing identical values. It is suggested that private projects using interfaces compatible with existing + * demos share the same VID/PID value. + * + * <table> + * <tr> + * <th>VID</th> + * <th>PID</th> + * <th>Usage</th> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2040</td> + * <td>Test VID/PID (See \ref Sec_Test_VIDPID)</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2041</td> + * <td>Mouse Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2042</td> + * <td>Keyboard Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2043</td> + * <td>Joystick Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2044</td> + * <td>CDC Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2045</td> + * <td>Mass Storage Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2046</td> + * <td>Audio Output Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2047</td> + * <td>Audio Input Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2048</td> + * <td>MIDI Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2049</td> + * <td>MagStripe Project</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x204A</td> + * <td>CDC Class Bootloader</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x204B</td> + * <td>USB to Serial Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x204C</td> + * <td>RNDIS Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x204D</td> + * <td>Combined Keyboard and Mouse Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x204E</td> + * <td>Dual CDC Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td> + * 0x204F + * </td> + * <td>Generic HID Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2060</td> + * <td>Benito Programmer Project</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2061</td> + * <td>Combined Mass Storage and Keyboard Demo</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2062</td> + * <td>Combined CDC and Mouse Demo</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2063</td> + * <td>Mass Storage/HID Interface Datalogger Project</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2064</td> + * <td>Interfaceless Control-Only LUFA Devices</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2065</td> + * <td>Test and Measurement Demo</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td> + * 0x2066 + * </td> + * <td>Multiple Report Keyboard/Mouse HID Demo</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2067</td> + * <td>HID Class Bootloader</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x2068</td> + * <td>Virtual Serial/Mass Storage Demo</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td> + * 0x2069 + * </td> + * <td>Webserver Project</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x206A</td> + * <td>Media Control Project</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x206B</td> + * <td>Printer Class Bootloader</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x206C</td> + * <td>Bulk Vendor Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x206D</td> + * <td>Dual MIDI Demo Application</td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x206E</td> + * <td><i>Currently Unallocated</i></td> + * </tr> + * <tr> + * <td>0x03EB</td> + * <td>0x206F</td> + * <td><i>Currently Unallocated</i></td> + * </tr> + * </table> + * + * \section Sec_Test_VIDPID The Test VID/PID Combination + * For use in testing of LUFA powered devices during development only, by non-commercial entities. + * All devices must accept collisions on this VID/PID range (from other in-development LUFA devices) + * to be resolved by using a unique release number in the Device Descriptor. No devices using this + * VID/PID combination may be released to the general public. + */ + diff --git a/lib/lufa/LUFA/DoxygenPages/WritingBoardDrivers.txt b/lib/lufa/LUFA/DoxygenPages/WritingBoardDrivers.txt new file mode 100644 index 0000000000..b2ff07e666 --- /dev/null +++ b/lib/lufa/LUFA/DoxygenPages/WritingBoardDrivers.txt @@ -0,0 +1,47 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_WritingBoardDrivers Writing LUFA Board Drivers + * + * LUFA ships with several basic pre-made board drivers, to control hardware present on the supported board + * hardware - such as Dataflash ICs, LEDs, Joysticks, or other hardware peripherals. When compiling an application + * which makes use of one or more board drivers located in <i>LUFA/Drivers/Board</i>, you must also indicate which + * board hardware you are using in your project makefile. This is done by defining the <tt>BOARD</tt> macro using + * the <tt>-D</tt> switch passed to the compiler, with a constant of <tt>BOARD_{Name}</tt>. For example, + * <tt>-DBOARD=BOARD_USBKEY</tt> instructs the compiler to use the USBKEY board hardware drivers. + * + * If your application does not use <i>any</i> board level drivers, you can omit the definition of the <tt>BOARD</tt> + * macro. However, some users may wish to write their own custom board hardware drivers which are to remain compatible + * with the LUFA hardware API. To do this, the <tt>BOARD</tt> macro should be defined to the value <tt>BOARD_USER</tt>. + * This indicates that the board level drivers should be located in a folder named "Board" located inside the + * application's folder. + * + * When used, the driver stub files located in the <tt>LUFA/CodeTemplates/DriverStubs</tt> folder should be copied to + * the user application's <tt>Board/</tt> directory, and filled out to include the values and code needed to control + * the custom board hardware. Once done, the existing LUFA board level APIs (accessed in the regular + * <tt>LUFA/Drivers/Board/</tt> folder) will redirect to the user board drivers, maintaining code compatibility and + * allowing for a different board to be selected through the project makefile with no code changes. + * + * \section Sec_BoardTemplates Board Driver Templates + * + * The templates for each board driver are reproduced below. + * + * \subsection SSec_BoardTemplates_Board Template for USER <Board/Board.h> + * \include "DriverStubs/Board.h" + * + * \subsection SSec_BoardTemplates_Buttons Template for USER <Board/Buttons.h> + * \include "DriverStubs/Buttons.h" + * + * \subsection SSec_BoardTemplates_Dataflash Template for USER <Board/Dataflash.h> + * \include "DriverStubs/Dataflash.h" + * + * \subsection SSec_BoardTemplates_Joystick Template for USER <Board/Joystick.h> + * \include "DriverStubs/Joystick.h" + * + * \subsection SSec_BoardTemplates_LEDs Template for USER <Board/LEDs.h> + * \include "DriverStubs/LEDs.h" + */ + |
