summaryrefslogtreecommitdiff
path: root/lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt')
-rw-r--r--lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt83
1 files changed, 83 insertions, 0 deletions
diff --git a/lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt b/lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt
new file mode 100644
index 0000000000..5e79a33e38
--- /dev/null
+++ b/lib/lufa/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt
@@ -0,0 +1,83 @@
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Output Host Demo
+ *
+ * \section Sec_Compat Demo Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this demo.
+ *
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ *
+ * \section Sec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Host</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Class:</b></td>
+ * <td>Audio Class</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclass:</b></td>
+ * <td>Standard Audio Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>USBIF Audio 1.0 Class Specification \n
+ * USBIF Audio 1.0 Class Terminal Types Specification \n
+ * USBIF Audio 1.0 Data Formats Specification</td>
+ * </tr>
+ * <tr>
+ * <td><b>Supported USB Speeds:</b></td>
+ * <td>Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section Sec_Description Project Description:
+ *
+ * Audio Output host demonstration application. This gives a simple reference
+ * application for implementing a USB Audio host, for USB Audio devices using
+ * the USB Audio 1.0 class profile.
+ *
+ * By default, the demo will produce a square wave test tone when the board
+ * button is pressed. If USE_TEST_TONE is not defined in the project makefile,
+ * incoming audio from the ADC channel 1 will be sampled and sent to the attached
+ * USB audio device instead.
+ *
+ * \section Sec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <th><b>Define Name:</b></th>
+ * <th><b>Location:</b></th>
+ * <th><b>Description:</b></th>
+ * </tr>
+ * <tr>
+ * <td>MIC_IN_ADC_CHANNEL</td>
+ * <td>AppConfig.h</td>
+ * <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ * </tr>
+ * <tr>
+ * <td>USE_TEST_TONE</td>
+ * <td>AppConfig.h</td>
+ * <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
+ * instead of sampling the board microphone.</td>
+ * </tr>
+ * <tr>
+ * <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
+ * <td>AppConfig.h</td>
+ * <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
+ * </tr>
+ * </table>
+ */
+