summaryrefslogtreecommitdiff
path: root/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c')
-rw-r--r--lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c136
1 files changed, 0 insertions, 136 deletions
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c
deleted file mode 100644
index fe7ad84bbb..0000000000
--- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main source file for the Bulk Vendor demo. This file contains the main tasks of the demo and
- * is responsible for the initial application hardware configuration.
- */
-
-#define INCLUDE_FROM_BULKVENDOR_C
-#include "BulkVendor.h"
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- * enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
- SetupHardware();
-
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- GlobalInterruptEnable();
-
- for (;;)
- {
- USB_USBTask();
-
- uint8_t ReceivedData[VENDOR_IO_EPSIZE];
- memset(ReceivedData, 0x00, sizeof(ReceivedData));
-
- Endpoint_SelectEndpoint(VENDOR_OUT_EPADDR);
- if (Endpoint_IsOUTReceived())
- {
- Endpoint_Read_Stream_LE(ReceivedData, VENDOR_IO_EPSIZE, NULL);
- Endpoint_ClearOUT();
-
- Endpoint_SelectEndpoint(VENDOR_IN_EPADDR);
- Endpoint_Write_Stream_LE(ReceivedData, VENDOR_IO_EPSIZE, NULL);
- Endpoint_ClearIN();
- }
- }
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
- /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
- XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
- XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
- /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
- XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
- XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
- PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
- /* Hardware Initialization */
- LEDs_Init();
- USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
-void EVENT_USB_Device_Connect(void)
-{
- /* Indicate USB enumerating */
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- * the status LEDs.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
- /* Indicate USB not ready */
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- * of the USB device after enumeration - the device endpoints are configured.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
- bool ConfigSuccess = true;
-
- /* Setup Vendor Data Endpoints */
- ConfigSuccess &= Endpoint_ConfigureEndpoint(VENDOR_IN_EPADDR, EP_TYPE_BULK, VENDOR_IO_EPSIZE, 1);
- ConfigSuccess &= Endpoint_ConfigureEndpoint(VENDOR_OUT_EPADDR, EP_TYPE_BULK, VENDOR_IO_EPSIZE, 1);
-
- /* Indicate endpoint configuration success or failure */
- LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- * the device from the USB host before passing along unhandled control requests to the library for processing
- * internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
- // Process vendor specific control requests here
-}