diff options
Diffstat (limited to 'lib/lufa/Demos/Device/Incomplete')
6 files changed, 1104 insertions, 0 deletions
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h new file mode 100644 index 0000000000..0ec4635eb0 --- /dev/null +++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h @@ -0,0 +1,126 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #elif (ARCH == ARCH_XMEGA) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH) +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define MAX_ENDPOINT_INDEX 4 +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c new file mode 100644 index 0000000000..96596c1619 --- /dev/null +++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c @@ -0,0 +1,205 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2010 Peter Lawrence (majbthrd [at] gmail [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(1,1,0), + .Class = 0x00, + .SubClass = 0x00, + .Protocol = 0x00, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, + .ProductID = 0x2065, + .ReleaseNumber = VERSION_BCD(0,0,1), + + .ManufacturerStrIndex = STRING_ID_Manufacturer, + .ProductStrIndex = STRING_ID_Product, + .SerialNumStrIndex = USE_INTERNAL_SERIAL, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 1, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .TM_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_TestAndMeasurement, + .AlternateSetting = 0x00, + + .TotalEndpoints = 3, + + .Class = 0xFE, + .SubClass = 0x03, + .Protocol = 0x01, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .TM_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = TMC_OUT_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = TMC_IO_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .TM_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = TMC_IN_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = TMC_IO_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .TM_NotificationEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = TMC_NOTIFICATION_EPADDR, + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = TMC_NOTIFICATION_EPSIZE, + .PollingIntervalMS = 0xFF + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera"); + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA TMC Demo"); + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case STRING_ID_Language: + Address = &LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case STRING_ID_Manufacturer: + Address = &ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case STRING_ID_Product: + Address = &ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} + diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h new file mode 100644 index 0000000000..628b63a503 --- /dev/null +++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h @@ -0,0 +1,104 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2010 Peter Lawrence (majbthrd [at] gmail [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include <avr/pgmspace.h> + + #include <LUFA/Drivers/USB/USB.h> + + /* Macros: */ + /** Endpoint address of the TMC notification IN endpoint. */ + #define TMC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) + + /** Endpoint address of the TMC device-to-host data IN endpoint. */ + #define TMC_IN_EPADDR (ENDPOINT_DIR_IN | 3) + + /** Endpoint address of the TMC host-to-device data OUT endpoint. */ + #define TMC_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) + + /** Size in bytes of the TMC data endpoints. */ + #define TMC_IO_EPSIZE 64 + + /** Size in bytes of the TMC notification endpoint. */ + #define TMC_NOTIFICATION_EPSIZE 8 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + + // Test and Measurement Interface + USB_Descriptor_Interface_t TM_Interface; + USB_Descriptor_Endpoint_t TM_DataOutEndpoint; + USB_Descriptor_Endpoint_t TM_DataInEndpoint; + USB_Descriptor_Endpoint_t TM_NotificationEndpoint; + } USB_Descriptor_Configuration_t; + + /** Enum for the device interface descriptor IDs within the device. Each interface descriptor + * should have a unique ID index associated with it, which can be used to refer to the + * interface from other descriptors. + */ + enum InterfaceDescriptors_t + { + INTERFACE_ID_TestAndMeasurement = 0, /**< Test and measurement interface descriptor ID */ + }; + + /** Enum for the device string descriptor IDs within the device. Each string descriptor should + * have a unique ID index associated with it, which can be used to refer to the string from + * other descriptors. + */ + enum StringDescriptors_t + { + STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ + STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ + STRING_ID_Product = 2, /**< Product string ID */ + }; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif + diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c new file mode 100644 index 0000000000..c324be2d13 --- /dev/null +++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c @@ -0,0 +1,476 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "TestAndMeasurement.h" + +/** Contains the (usually static) capabilities of the TMC device. This table is requested by the + * host upon enumeration to give it information on what features of the Test and Measurement USB + * Class the device supports. + */ +TMC_Capabilities_t Capabilities = + { + .Status = TMC_STATUS_SUCCESS, + .TMCVersion = VERSION_BCD(1.00), + + .Interface = + { + .ListenOnly = false, + .TalkOnly = false, + .PulseIndicateSupported = false, + }, + + .Device = + { + .SupportsAbortINOnMatch = false, + }, + }; + +/** Current TMC control request that is being processed */ +static uint8_t RequestInProgress = 0; + +/** Stream callback abort flag for bulk IN data */ +static bool IsTMCBulkINReset = false; + +/** Stream callback abort flag for bulk OUT data */ +static bool IsTMCBulkOUTReset = false; + +/** Last used tag value for data transfers */ +static uint8_t CurrentTransferTag = 0; + +/** Length of last data transfer, for reporting to the host in case an in-progress transfer is aborted */ +static uint16_t LastTransferLength = 0; + +/** Buffer to hold the next message to sent to the TMC host */ +static uint8_t NextResponseBuffer[64]; + +/** Indicates the length of the next response to send */ +static uint8_t NextResponseLen; + +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + SetupHardware(); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + GlobalInterruptEnable(); + + for (;;) + { + TMC_Task(); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ +#if (ARCH == ARCH_AVR8) + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); +#elif (ARCH == ARCH_XMEGA) + /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ + XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); + + /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ + XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); + XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); + + PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; +#endif + + /* Hardware Initialization */ + LEDs_Init(); + USB_Init(); +} + +/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and + * starts the library USB task to begin the enumeration and USB management process. + */ +void EVENT_USB_Device_Connect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via + * the status LEDs and stops the USB management and CDC management tasks. + */ +void EVENT_USB_Device_Disconnect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration + * of the USB device after enumeration - the device endpoints are configured and the CDC management task started. + */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + /* Setup TMC In, Out and Notification Endpoints */ + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, TMC_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1); + + /* Indicate endpoint configuration success or failure */ + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); +} + +/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to + * the device from the USB host before passing along unhandled control requests to the library for processing + * internally. + */ +void EVENT_USB_Device_ControlRequest(void) +{ + uint8_t TMCRequestStatus = TMC_STATUS_SUCCESS; + + /* Process TMC specific control requests */ + switch (USB_ControlRequest.bRequest) + { + case Req_InitiateAbortBulkOut: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT)) + { + /* Check that no split transaction is already in progress and the data transfer tag is valid */ + if (RequestInProgress != 0) + { + TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS; + } + else if (USB_ControlRequest.wValue != CurrentTransferTag) + { + TMCRequestStatus = TMC_STATUS_TRANSFER_NOT_IN_PROGRESS; + } + else + { + /* Indicate that all in-progress/pending data OUT requests should be aborted */ + IsTMCBulkOUTReset = true; + + /* Save the split request for later checking when a new request is received */ + RequestInProgress = Req_InitiateAbortBulkOut; + } + + Endpoint_ClearSETUP(); + + /* Write the request response byte */ + Endpoint_Write_8(TMCRequestStatus); + + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + + break; + case Req_CheckAbortBulkOutStatus: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT)) + { + /* Check that an ABORT BULK OUT transaction has been requested and that the request has completed */ + if (RequestInProgress != Req_InitiateAbortBulkOut) + TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS; + else if (IsTMCBulkOUTReset) + TMCRequestStatus = TMC_STATUS_PENDING; + else + RequestInProgress = 0; + + Endpoint_ClearSETUP(); + + /* Write the request response bytes */ + Endpoint_Write_8(TMCRequestStatus); + Endpoint_Write_16_LE(0); + Endpoint_Write_32_LE(LastTransferLength); + + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + + break; + case Req_InitiateAbortBulkIn: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT)) + { + /* Check that no split transaction is already in progress and the data transfer tag is valid */ + if (RequestInProgress != 0) + { + TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS; + } + else if (USB_ControlRequest.wValue != CurrentTransferTag) + { + TMCRequestStatus = TMC_STATUS_TRANSFER_NOT_IN_PROGRESS; + } + else + { + /* Indicate that all in-progress/pending data IN requests should be aborted */ + IsTMCBulkINReset = true; + + /* Save the split request for later checking when a new request is received */ + RequestInProgress = Req_InitiateAbortBulkIn; + } + + Endpoint_ClearSETUP(); + + /* Write the request response bytes */ + Endpoint_Write_8(TMCRequestStatus); + Endpoint_Write_8(CurrentTransferTag); + + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + + break; + case Req_CheckAbortBulkInStatus: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT)) + { + /* Check that an ABORT BULK IN transaction has been requested and that the request has completed */ + if (RequestInProgress != Req_InitiateAbortBulkIn) + TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS; + else if (IsTMCBulkINReset) + TMCRequestStatus = TMC_STATUS_PENDING; + else + RequestInProgress = 0; + + Endpoint_ClearSETUP(); + + /* Write the request response bytes */ + Endpoint_Write_8(TMCRequestStatus); + Endpoint_Write_16_LE(0); + Endpoint_Write_32_LE(LastTransferLength); + + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + + break; + case Req_InitiateClear: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + /* Check that no split transaction is already in progress */ + if (RequestInProgress != 0) + { + Endpoint_Write_8(TMC_STATUS_SPLIT_IN_PROGRESS); + } + else + { + /* Indicate that all in-progress/pending data IN and OUT requests should be aborted */ + IsTMCBulkINReset = true; + IsTMCBulkOUTReset = true; + + /* Save the split request for later checking when a new request is received */ + RequestInProgress = Req_InitiateClear; + } + + Endpoint_ClearSETUP(); + + /* Write the request response byte */ + Endpoint_Write_8(TMCRequestStatus); + + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + + break; + case Req_CheckClearStatus: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + /* Check that a CLEAR transaction has been requested and that the request has completed */ + if (RequestInProgress != Req_InitiateClear) + TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS; + else if (IsTMCBulkINReset || IsTMCBulkOUTReset) + TMCRequestStatus = TMC_STATUS_PENDING; + else + RequestInProgress = 0; + + Endpoint_ClearSETUP(); + + /* Write the request response bytes */ + Endpoint_Write_8(TMCRequestStatus); + Endpoint_Write_8(0); + + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + + break; + case Req_GetCapabilities: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + Endpoint_ClearSETUP(); + + /* Write the device capabilities to the control endpoint */ + Endpoint_Write_Control_Stream_LE(&Capabilities, sizeof(TMC_Capabilities_t)); + Endpoint_ClearOUT(); + } + + break; + } +} + +void ProcessSentMessage(uint8_t* const Data, const uint8_t Length) +{ + if (strncmp((char*)Data, "*IDN?", 5) == 0) + strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO"); + + NextResponseLen = strlen((char*)NextResponseBuffer); +} + +uint8_t GetNextMessage(uint8_t* const Data) +{ + strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO"); + + NextResponseLen = strlen((char*)NextResponseBuffer); +// --- + uint8_t DataLen = MIN(NextResponseLen, 64); + + strlcpy((char*)Data, (char*)NextResponseBuffer, DataLen); + + return DataLen; +} + +/** Function to manage TMC data transmission and reception to and from the host. */ +void TMC_Task(void) +{ + /* Device must be connected and configured for the task to run */ + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + TMC_MessageHeader_t MessageHeader; + uint8_t MessagePayload[128]; + + /* Try to read in a TMC message from the interface, process if one is available */ + if (ReadTMCHeader(&MessageHeader)) + { + /* Indicate busy */ + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + + switch (MessageHeader.MessageID) + { + case TMC_MESSAGEID_DEV_DEP_MSG_OUT: + LastTransferLength = 0; + while (Endpoint_Read_Stream_LE(MessagePayload, MIN(MessageHeader.TransferSize, sizeof(MessagePayload)), &LastTransferLength) == + ENDPOINT_RWSTREAM_IncompleteTransfer) + { + if (IsTMCBulkOUTReset) + break; + } + + Endpoint_ClearOUT(); + + ProcessSentMessage(MessagePayload, LastTransferLength); + break; + case TMC_MESSAGEID_DEV_DEP_MSG_IN: + Endpoint_ClearOUT(); + + MessageHeader.TransferSize = GetNextMessage(MessagePayload); + MessageHeader.MessageIDSpecific.DeviceOUT.LastMessageTransaction = true; + WriteTMCHeader(&MessageHeader); + + LastTransferLength = 0; + while (Endpoint_Write_Stream_LE(MessagePayload, MessageHeader.TransferSize, &LastTransferLength) == + ENDPOINT_RWSTREAM_IncompleteTransfer) + { + if (IsTMCBulkINReset) + break; + } + + Endpoint_ClearIN(); + break; + default: + Endpoint_StallTransaction(); + break; + } + + LEDs_SetAllLEDs(LEDMASK_USB_READY); + } + + /* All pending data has been processed - reset the data abort flags */ + IsTMCBulkINReset = false; + IsTMCBulkOUTReset = false; +} + +/** Attempts to read in the TMC message header from the TMC interface. + * + * \param[out] MessageHeader Pointer to a location where the read header (if any) should be stored + * + * \return Boolean \c true if a header was read, \c false otherwise + */ +bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader) +{ + uint16_t BytesTransferred; + uint8_t ErrorCode; + + /* Select the Data Out endpoint */ + Endpoint_SelectEndpoint(TMC_OUT_EPADDR); + + /* Abort if no command has been sent from the host */ + if (!(Endpoint_IsOUTReceived())) + return false; + + /* Read in the header of the command from the host */ + BytesTransferred = 0; + while ((ErrorCode = Endpoint_Read_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) == + ENDPOINT_RWSTREAM_IncompleteTransfer) + { + if (IsTMCBulkOUTReset) + break; + } + + /* Store the new command tag value for later use */ + CurrentTransferTag = MessageHeader->Tag; + + /* Indicate if the command has been aborted or not */ + return (!(IsTMCBulkOUTReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError)); +} + +bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader) +{ + uint16_t BytesTransferred; + uint8_t ErrorCode; + + /* Set the message tag of the command header */ + MessageHeader->Tag = CurrentTransferTag; + MessageHeader->InverseTag = ~CurrentTransferTag; + + /* Select the Data In endpoint */ + Endpoint_SelectEndpoint(TMC_IN_EPADDR); + + /* Send the command header to the host */ + BytesTransferred = 0; + while ((ErrorCode = Endpoint_Write_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) == + ENDPOINT_RWSTREAM_IncompleteTransfer) + { + if (IsTMCBulkINReset) + break; + } + + /* Indicate if the command has been aborted or not */ + return (!(IsTMCBulkINReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError)); +} + diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h new file mode 100644 index 0000000000..50e865bedd --- /dev/null +++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h @@ -0,0 +1,150 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#ifndef _TESTANDMEASUREMENT_H_ +#define _TESTANDMEASUREMENT_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/wdt.h> + #include <avr/power.h> + #include <avr/interrupt.h> + + #include "Descriptors.h" + + #include <LUFA/Drivers/Board/LEDs.h> + #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> + + /* Macros: */ + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ + #define LEDMASK_USB_NOTREADY LEDS_LED1 + + /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ + #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ + #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ + #define LEDMASK_USB_BUSY LEDS_LED2 + + #define Req_InitiateAbortBulkOut 0x01 + #define Req_CheckAbortBulkOutStatus 0x02 + #define Req_InitiateAbortBulkIn 0x03 + #define Req_CheckAbortBulkInStatus 0x04 + #define Req_InitiateClear 0x05 + #define Req_CheckClearStatus 0x06 + #define Req_GetCapabilities 0x07 + #define Req_IndicatorPulse 0x40 + + #define TMC_STATUS_SUCCESS 0x01 + #define TMC_STATUS_PENDING 0x02 + #define TMC_STATUS_FAILED 0x80 + #define TMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 + #define TMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 + #define TMC_STATUS_SPLIT_IN_PROGRESS 0x83 + + #define TMC_MESSAGEID_DEV_DEP_MSG_OUT 0x01 + #define TMC_MESSAGEID_DEV_DEP_MSG_IN 0x02 + #define TMC_MESSAGEID_DEV_VENDOR_OUT 0x7E + #define TMC_MESSAGEID_DEV_VENDOR_IN 0x7F + + /* Type Defines */ + typedef struct + { + uint8_t Status; + uint8_t Reserved; + + uint16_t TMCVersion; + + struct + { + unsigned ListenOnly : 1; + unsigned TalkOnly : 1; + unsigned PulseIndicateSupported : 1; + unsigned Reserved : 5; + } Interface; + + struct + { + unsigned SupportsAbortINOnMatch : 1; + unsigned Reserved : 7; + } Device; + + uint8_t Reserved2[6]; + uint8_t Reserved3[12]; + } TMC_Capabilities_t; + + typedef struct + { + uint8_t LastMessageTransaction; + uint8_t TermChar; + uint8_t Reserved[2]; + } TMC_DevOUTMessageHeader_t; + + typedef struct + { + uint8_t LastMessageTransaction; + uint8_t Reserved[3]; + } TMC_DevINMessageHeader_t; + + typedef struct + { + uint8_t MessageID; + uint8_t Tag; + uint8_t InverseTag; + uint8_t Reserved; + uint32_t TransferSize; + + union + { + TMC_DevOUTMessageHeader_t DeviceOUT; + TMC_DevINMessageHeader_t DeviceIN; + uint32_t VendorSpecific; + } MessageIDSpecific; + } TMC_MessageHeader_t; + + /* Function Prototypes: */ + void SetupHardware(void); + void TMC_Task(void); + bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader); + bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader); + + void EVENT_USB_Device_Connect(void); + void EVENT_USB_Device_Disconnect(void); + void EVENT_USB_Device_ConfigurationChanged(void); + void EVENT_USB_Device_ControlRequest(void); + +#endif + diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile new file mode 100644 index 0000000000..e0d89ccd70 --- /dev/null +++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile @@ -0,0 +1,43 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2017. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +# Run "make help" for target help. + +MCU = at90usb1287 +ARCH = AVR8 +BOARD = USBKEY +F_CPU = 8000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = TestAndMeasurement +SRC = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) +LUFA_PATH = ../../../../LUFA +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ +LD_FLAGS = + +# Default target +all: + +# Include LUFA-specific DMBS extension modules +DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA +include $(DMBS_LUFA_PATH)/lufa-sources.mk +include $(DMBS_LUFA_PATH)/lufa-gcc.mk + +# Include common DMBS build system modules +DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/core.mk +include $(DMBS_PATH)/cppcheck.mk +include $(DMBS_PATH)/doxygen.mk +include $(DMBS_PATH)/dfu.mk +include $(DMBS_PATH)/gcc.mk +include $(DMBS_PATH)/hid.mk +include $(DMBS_PATH)/avrdude.mk +include $(DMBS_PATH)/atprogram.mk |