diff options
Diffstat (limited to 'keyboards')
21 files changed, 1492 insertions, 0 deletions
diff --git a/keyboards/nullbitsco/nibble/README.md b/keyboards/nullbitsco/nibble/README.md new file mode 100644 index 0000000000..92825847d6 --- /dev/null +++ b/keyboards/nullbitsco/nibble/README.md @@ -0,0 +1,19 @@ +# NIBBLE + + + +A unique, tweakable 65% keyboard kit built by nullbits. [More info at nullbits.co](https://nullbits.co/nibble/) + +* Keyboard Maintainer: [Jay Greco](https://github.com/jaygreco) +* Hardware Supported: NIBBLE Rev1, Pro Micro comaptible MCUs. +* Hardware Availability: [nullbits.co](https://nullbits.co/) + +Note: If you are seeing issues with MacOS and keyboard hangs after sleep, make sure `NO_USB_STARTUP_CHECK = yes` is set in your rules.mk. + +Adds experimental "Remote Keyboard" functionality, which forwards keystrokes from an external macropad, keyboard, or numpad over UART/TRRS, removing the need for an additional USB connection. + +Make example for this keyboard (after setting up your build environment): + + make nullbitsco/nibble:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/nullbitsco/nibble/big_led.c b/keyboards/nullbitsco/nibble/big_led.c new file mode 100644 index 0000000000..eb0d0a5071 --- /dev/null +++ b/keyboards/nullbitsco/nibble/big_led.c @@ -0,0 +1,67 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "big_led.h" + +void set_big_LED_r(uint8_t mode) { + switch(mode) { + case LED_ON: + setPinOutput(BIG_LED_R_PIN); + writePin(BIG_LED_R_PIN, GPIO_STATE_HIGH); + break; + + case LED_OFF: + setPinOutput(BIG_LED_R_PIN); + writePin(BIG_LED_R_PIN, GPIO_STATE_LOW); + break; + + default: + break; + } +} + +void set_big_LED_g(uint8_t mode) { + switch(mode) { + case LED_ON: + setPinOutput(BIG_LED_G_PIN); + writePin(BIG_LED_G_PIN, GPIO_STATE_HIGH); + break; + + case LED_OFF: + setPinOutput(BIG_LED_G_PIN); + writePin(BIG_LED_G_PIN, GPIO_STATE_LOW); + break; + + default: + break; + } +} + +void set_big_LED_b(uint8_t mode) { + switch(mode) { + case LED_ON: + setPinOutput(BIG_LED_B_PIN); + writePin(BIG_LED_B_PIN, GPIO_STATE_HIGH); + break; + + case LED_OFF: + setPinOutput(BIG_LED_B_PIN); + writePin(BIG_LED_B_PIN, GPIO_STATE_LOW); + break; + + default: + break; + } +}
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/big_led.h b/keyboards/nullbitsco/nibble/big_led.h new file mode 100644 index 0000000000..113aaaf106 --- /dev/null +++ b/keyboards/nullbitsco/nibble/big_led.h @@ -0,0 +1,34 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* Optional big LED pins */ +#define BIG_LED_R_PIN D7 +#define BIG_LED_G_PIN C6 +#define BIG_LED_B_PIN D0 + +#define LED_ON 2 +#define LED_OFF 0 + +#define GPIO_STATE_LOW 0 +#define GPIO_STATE_HIGH 1 + +void + set_big_LED_r(uint8_t mode), + set_big_LED_g(uint8_t mode), + set_big_LED_b(uint8_t mode);
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/bitc_led.c b/keyboards/nullbitsco/nibble/bitc_led.c new file mode 100644 index 0000000000..60ffeea278 --- /dev/null +++ b/keyboards/nullbitsco/nibble/bitc_led.c @@ -0,0 +1,37 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "bitc_led.h" + +void set_bitc_LED(uint8_t mode) { + switch(mode) { + case LED_ON: + setPinOutput(PIN_LED); + writePin(PIN_LED, GPIO_STATE_HIGH); + break; + + case LED_DIM: + setPinInput(PIN_LED); + break; + + case LED_OFF: + setPinOutput(PIN_LED); + writePin(PIN_LED, GPIO_STATE_LOW); + break; + + default: + break; + } +}
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/bitc_led.h b/keyboards/nullbitsco/nibble/bitc_led.h new file mode 100644 index 0000000000..b3552a7d19 --- /dev/null +++ b/keyboards/nullbitsco/nibble/bitc_led.h @@ -0,0 +1,29 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define LED_ON 2 +#define LED_DIM 1 +#define LED_OFF 0 + +#define GPIO_STATE_LOW 0 +#define GPIO_STATE_HIGH 1 + +#define PIN_LED F0 + +void set_bitc_LED(uint8_t mode);
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/config.h b/keyboards/nullbitsco/nibble/config.h new file mode 100644 index 0000000000..3e0adce454 --- /dev/null +++ b/keyboards/nullbitsco/nibble/config.h @@ -0,0 +1,61 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "config_common.h" + +/* Used to set host for remote KB if VUSB detect doesn't work. */ +// #define KEYBOARD_HOST // Force host mode +// #define KEYBOARD_REMOTE // Force remote mode + +// Workaround for freezing after MacOS sleep +#define NO_USB_STARTUP_CHECK + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6E61 +#define PRODUCT_ID 0x6060 + +#define DEVICE_VER 0x0001 +#define MANUFACTURER nullbits +#define PRODUCT NIBBLE + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 +#define MATRIX_MUX_COLS 4 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 10 + +/* + * Keyboard Matrix Assignments + * The nibble uses a demultiplexer for the cols. + * to free up more IOs for awesomeness! + * See matrix.c for more details. +*/ +#define MATRIX_ROW_PINS { B1, B3, B2, B6, D4 } +#define MATRIX_COL_MUX_PINS { F4, F5, F6, F7 } +#define MATRIX_COL_PINS { } + +/* Optional SMT LED pins */ +#define RGB_DI_PIN E6 +#define RGBLED_NUM 10 +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_SLEEP + +/* Optional encoder pins */ +#define ENCODERS_PAD_A { B5 } +#define ENCODERS_PAD_B { B4 }
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/keymaps/default/keymap.c b/keyboards/nullbitsco/nibble/keymaps/default/keymap.c new file mode 100644 index 0000000000..6d453e7067 --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/default/keymap.c @@ -0,0 +1,128 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#define _MA 0 +#define _FN 1 + +enum custom_keycodes { + KC_CUST = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_MA] = LAYOUT_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD, + KC_F13, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F14, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F15, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F16, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_ansi( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_INS, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + // Send keystrokes to host keyboard, if connected (see readme) + process_record_remote_kb(keycode, record); + switch(keycode) { + case KC_CUST: //custom macro + if (record->event.pressed) { + } + break; + + case RM_1: //remote macro 1 + if (record->event.pressed) { + } + break; + + case RM_2: //remote macro 2 + if (record->event.pressed) { + } + break; + + case RM_3: //remote macro 3 + if (record->event.pressed) { + } + break; + + case RM_4: //remote macro 4 + if (record->event.pressed) { + } + break; + + } +return true; +} + +// RGB config, for changing RGB settings on non-VIA firmwares +void change_RGB(bool clockwise) { + bool shift = get_mods() & MOD_MASK_SHIFT; + bool alt = get_mods() & MOD_MASK_ALT; + bool ctrl = get_mods() & MOD_MASK_CTRL; + + if (clockwise) { + if (alt) { + rgblight_increase_hue(); + } else if (ctrl) { + rgblight_increase_val(); + } else if (shift) { + rgblight_increase_sat(); + } else { + rgblight_step(); + } + + } else { + if (alt) { + rgblight_decrease_hue(); + } else if (ctrl) { + rgblight_decrease_val(); + } else if (shift) { + rgblight_decrease_sat(); + } else { + rgblight_step_reverse(); + } + } +} + +void encoder_update_kb(uint8_t index, bool clockwise) { + if (layer_state_is(1)) { + //change RGB settings + change_RGB(clockwise); + } + else { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} + +void matrix_init_user(void) { + // Initialize remote keyboard, if connected (see readme) + matrix_init_remote_kb(); +} + +void matrix_scan_user(void) { + // Scan and parse keystrokes from remote keyboard, if connected (see readme) + matrix_scan_remote_kb(); +}
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/keymaps/iso/keymap.c b/keyboards/nullbitsco/nibble/keymaps/iso/keymap.c new file mode 100644 index 0000000000..46f246d6ee --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/iso/keymap.c @@ -0,0 +1,128 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#define _MA 0 +#define _FN 1 + +enum custom_keycodes { + KC_CUST = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_MA] = LAYOUT_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD, + KC_F13, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_F14, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_F15, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F16, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_iso( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_INS, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + // Send keystrokes to host keyboard, if connected (see readme) + process_record_remote_kb(keycode, record); + switch(keycode) { + case KC_CUST: //custom macro + if (record->event.pressed) { + } + break; + + case RM_1: //remote macro 1 + if (record->event.pressed) { + } + break; + + case RM_2: //remote macro 2 + if (record->event.pressed) { + } + break; + + case RM_3: //remote macro 3 + if (record->event.pressed) { + } + break; + + case RM_4: //remote macro 4 + if (record->event.pressed) { + } + break; + + } +return true; +} + +// RGB config, for changing RGB settings on non-VIA firmwares +void change_RGB(bool clockwise) { + bool shift = get_mods() & MOD_MASK_SHIFT; + bool alt = get_mods() & MOD_MASK_ALT; + bool ctrl = get_mods() & MOD_MASK_CTRL; + + if (clockwise) { + if (alt) { + rgblight_increase_hue(); + } else if (ctrl) { + rgblight_increase_val(); + } else if (shift) { + rgblight_increase_sat(); + } else { + rgblight_step(); + } + + } else { + if (alt) { + rgblight_decrease_hue(); + } else if (ctrl) { + rgblight_decrease_val(); + } else if (shift) { + rgblight_decrease_sat(); + } else { + rgblight_step_reverse(); + } + } +} + +void encoder_update_kb(uint8_t index, bool clockwise) { + if (layer_state_is(1)) { + //change RGB settings + change_RGB(clockwise); + } + else { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} + +void matrix_init_user(void) { + // Initialize remote keyboard, if connected (see readme) + matrix_init_remote_kb(); +} + +void matrix_scan_user(void) { + // Scan and parse keystrokes from remote keyboard, if connected (see readme) + matrix_scan_remote_kb(); +}
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/keymaps/via/config.h b/keyboards/nullbitsco/nibble/keymaps/via/config.h new file mode 100644 index 0000000000..961e2aed1a --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/via/config.h @@ -0,0 +1,21 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +// Custom config starts after VIA's EEPROM usage, +// dynamic keymaps start after this. +// Custom config Usage: +// 1 for enabled encoder modes (1 byte) +// 6 for 3x custom encoder settings, left, right, and press (18 bytes) +#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 19
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/keymaps/via/keymap.c b/keyboards/nullbitsco/nibble/keymaps/via/keymap.c new file mode 100644 index 0000000000..1e1b0c0369 --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/via/keymap.c @@ -0,0 +1,164 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "via_extras.h" + +#define _BASE 0 +#define _VIA1 1 +#define _VIA2 2 +#define _VIA3 3 + +#define KC_DISC_MUTE KC_F23 +#define KC_DISC_DEAF KC_F24 +#define NUM_CUST_KEYCODES (_NUM_CUST_KCS - SAFE_RANGE) +#define VIA_KEYCODE_RANGE 0x5F80 + +enum custom_keycodes { + PROG = SAFE_RANGE, + DISC_MUTE, + DISC_DEAF, + SUPER_ALT_TAB, + _NUM_CUST_KCS, +}; + +// Macro variables +bool is_alt_tab_active = false; +uint16_t alt_tab_timer = 0; +bool muted = false; +bool deafened = false; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_NUBS, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_F13, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F14, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F15, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F16, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_VIA1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_VIA1] = LAYOUT_all( + _______, RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_INS, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT + ), + + [_VIA2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_VIA3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; + +void map_via_keycode(uint16_t * keycode) { + if (abs(*keycode - VIA_KEYCODE_RANGE) < NUM_CUST_KEYCODES) { //make into macro? + dprintf("VIA custom keycode found, mapping to QMK keycode.\n"); + uint16_t new_keycode = (*keycode - VIA_KEYCODE_RANGE) + SAFE_RANGE; + dprintf("VIA KC: %u QMK KC: %u\n", *keycode, new_keycode); + *keycode = new_keycode; + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + map_via_keycode(&keycode); + // Send keystrokes to host keyboard, if connected (see readme) + process_record_remote_kb(keycode, record); + switch(keycode) { + case PROG: + if (record->event.pressed) { + rgblight_disable_noeeprom(); + bootloader_jump(); + } + break; + + case DISC_MUTE: + if (record->event.pressed) { + tap_code(KC_DISC_MUTE); + if (!rgblight_is_enabled()) break; + + if (muted) { + rgblight_enable_noeeprom(); + } else { + rgblight_timer_disable(); + uint8_t val = rgblight_get_val(); + rgblight_sethsv_range(255, 255, val, 0, 1); + } + muted = !muted; + } + break; + + case DISC_DEAF: + if (record->event.pressed) { + tap_code(KC_DISC_DEAF); + if (!rgblight_is_enabled()) break; + + if (deafened) { + rgblight_enable_noeeprom(); + } else { + rgblight_timer_disable(); + uint8_t val = rgblight_get_val(); + rgblight_sethsv_range(255, 255, val, 0, RGBLED_NUM-1); + } + deafened = !deafened; + } + break; + + case SUPER_ALT_TAB: + if (record->event.pressed) { + if (!is_alt_tab_active) { + is_alt_tab_active = true; + register_code(KC_LALT); + } + alt_tab_timer = timer_read(); + register_code(KC_TAB); + } else { + unregister_code(KC_TAB); + } + break; + + default: + break; + } +return true; +} + +void matrix_init_user(void) { + // Initialize remote keyboard, if connected (see readme) + matrix_init_remote_kb(); +} + +void matrix_scan_user(void) { + // Scan and parse keystrokes from remote keyboard, if connected (see readme) + matrix_scan_remote_kb(); + if (is_alt_tab_active) { + if (timer_elapsed(alt_tab_timer) > 1000) { + unregister_code(KC_LALT); + is_alt_tab_active = false; + } + } +}
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.c b/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.c new file mode 100644 index 0000000000..bdea1869c2 --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.c @@ -0,0 +1,133 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "nibble_encoder.h" + +uint8_t encoder_value = 0x20, + encoder_mode = ENC_MODE_VOLUME, + enabled_encoder_modes = 0x1F; + +uint16_t retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior) { +#ifdef DYNAMIC_KEYMAP_ENABLE + void* addr = (void*)(EEPROM_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2)); + uint16_t keycode = eeprom_read_byte(addr) << 8; + keycode |= eeprom_read_byte(addr + 1); + return keycode; +#else + return 0; +#endif +} + +void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code) { +#ifdef DYNAMIC_KEYMAP_ENABLE + void* addr = (void*)(EEPROM_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2)); + eeprom_update_byte(addr, (uint8_t)(new_code >> 8)); + eeprom_update_byte(addr + 1, (uint8_t)(new_code & 0xFF)); +#endif +} + +void pre_encoder_mode_change(void) { + dprintf("Changing encoder mode: %u\n", encoder_mode); +} + +void post_encoder_mode_change(void) { + dprintf("Encoder mode: %u\n", encoder_mode); +} + +//??? +void change_encoder_mode(bool clockwise) { + pre_encoder_mode_change(); + if(enabled_encoder_modes == 0){ + enabled_encoder_modes = 0x1F; + } + do { + if(!clockwise){ + if (encoder_mode == 0){ + encoder_mode = _NUM_ENCODER_MODES - 1; + } else{ + encoder_mode = encoder_mode - 1; + } + } else { + encoder_mode = (encoder_mode + 1) % _NUM_ENCODER_MODES; + } + } while(((1 << encoder_mode) & enabled_encoder_modes) == 0); + post_encoder_mode_change(); +} + +uint16_t handle_encoder_cw(void) { + dprintf("Encoder mode: %u\n", encoder_mode); + uint16_t mapped_code = 0; + switch(encoder_mode){ + default: + break; + case ENC_MODE_VOLUME: + mapped_code = KC_VOLU; + break; + case ENC_MODE_MEDIA: + mapped_code = KC_MEDIA_NEXT_TRACK; + break; + case ENC_MODE_SCROLL: + mapped_code = KC_WH_D; + break; + case ENC_MODE_BACKLIGHT: + mapped_code = RGB_VAI; + break; +#ifdef DYNAMIC_KEYMAP_ENABLE + case ENC_MODE_CUSTOM0: + mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_CW); + break; + case ENC_MODE_CUSTOM1: + mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_CW); + break; + case ENC_MODE_CUSTOM2: + mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_CW); + break; +#endif + } + return mapped_code; +} + +uint16_t handle_encoder_ccw(void) { + dprintf("Encoder mode: %u\n", encoder_mode); + uint16_t mapped_code = 0; + switch(encoder_mode){ + default: + break; + case ENC_MODE_VOLUME: + mapped_code = KC_VOLD; + break; + case ENC_MODE_MEDIA: + mapped_code = KC_MEDIA_PREV_TRACK; + break; + case ENC_MODE_SCROLL: + mapped_code = KC_WH_U; + break; + case ENC_MODE_BACKLIGHT: + mapped_code = RGB_VAD; + break; +#ifdef DYNAMIC_KEYMAP_ENABLE + case ENC_MODE_CUSTOM0: + mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_CCW); + break; + case ENC_MODE_CUSTOM1: + mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_CCW); + break; + case ENC_MODE_CUSTOM2: + mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_CCW); + break; +#endif + } + return mapped_code; +} diff --git a/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.h b/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.h new file mode 100644 index 0000000000..fc1e61434b --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.h @@ -0,0 +1,50 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include QMK_KEYBOARD_H +#include "eeprom.h" + +#define EEPROM_ENABLED_ENCODER_MODES (VIA_EEPROM_CUSTOM_CONFIG_ADDR) +#define EEPROM_CUSTOM_ENCODER (VIA_EEPROM_CUSTOM_CONFIG_ADDR+1) + +enum encoder_modes { + ENC_MODE_VOLUME, + ENC_MODE_MEDIA, + ENC_MODE_SCROLL, + ENC_MODE_BRIGHTNESS, + ENC_MODE_BACKLIGHT, + ENC_MODE_CUSTOM0, + ENC_MODE_CUSTOM1, + ENC_MODE_CUSTOM2, + _NUM_ENCODER_MODES, +}; + +enum custom_encoder_behavior { + ENC_CUSTOM_CW = 0, + ENC_CUSTOM_CCW, + ENC_CUSTOM_PRESS +}; + +uint16_t + retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior), + handle_encoder_cw(void), + handle_encoder_ccw(void); + +void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code), + pre_encoder_mode_change(void), + post_encoder_mode_change(void), + change_encoder_mode(bool clockwise);
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/keymaps/via/rules.mk b/keyboards/nullbitsco/nibble/keymaps/via/rules.mk new file mode 100644 index 0000000000..ee197efc02 --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/via/rules.mk @@ -0,0 +1,4 @@ +VIA_ENABLE = yes + +SRC += keymaps/via/nibble_encoder.c +SRC += keymaps/via/via_extras.c
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/keymaps/via/via_extras.c b/keyboards/nullbitsco/nibble/keymaps/via/via_extras.c new file mode 100644 index 0000000000..067296b76b --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/via/via_extras.c @@ -0,0 +1,129 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "via_extras.h" + +// Encoder Behavior +extern uint8_t encoder_value; +extern uint8_t encoder_mode; +extern uint8_t enabled_encoder_modes; + +void raw_hid_receive_kb( uint8_t *data, uint8_t length ) +{ + uint8_t *command_id = &(data[0]); + uint8_t *command_data = &(data[1]); + dprintf("raw hid recv! command_id: %u\n",*command_id); + switch ( *command_id ) + { + case id_get_keyboard_value: + { + switch( command_data[0]) + { + case id_encoder_modes: + { + command_data[1] = enabled_encoder_modes; + dprintf("[read] enabled_encoder_modes: %u\n", enabled_encoder_modes); + } + break; + + case id_encoder_custom: + { + uint8_t custom_encoder_idx = command_data[1]; + uint16_t keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CW); + command_data[2] = keycode >> 8; + command_data[3] = keycode & 0xFF; + keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CCW); + command_data[4] = keycode >> 8; + command_data[5] = keycode & 0xFF; + keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_PRESS); + command_data[6] = keycode >> 8; + command_data[7] = keycode & 0xFF; + } + break; + + default: + { + *command_id = id_unhandled; + } + break; + } + } + break; + case id_set_keyboard_value: + { + switch(command_data[0]){ + case id_encoder_modes: + { + enabled_encoder_modes = command_data[1]; + dprintf("[write] enabled_encoder_modes: %u\n", enabled_encoder_modes); + eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, enabled_encoder_modes); + } + break; + + case id_encoder_custom: + { + uint8_t custom_encoder_idx = command_data[1]; + uint8_t encoder_behavior = command_data[2]; + uint16_t keycode = (command_data[3] << 8) | command_data[4]; + set_custom_encoder_config(custom_encoder_idx, encoder_behavior, keycode); + } + break; + + default: + { + *command_id = id_unhandled; + } + break; + } + } + break; + + default: + { + // Unhandled message. + *command_id = id_unhandled; + } + break; + } +} + +void encoder_update_kb(uint8_t index, bool clockwise) { + if (layer_state_is(1)) { + change_encoder_mode(clockwise); + return; + } + uint16_t mapped_code = 0; + if (clockwise) { + mapped_code = handle_encoder_cw(); + } else { + mapped_code = handle_encoder_ccw(); + } + if(mapped_code != 0){ + tap_code16(mapped_code); + } +} + +void custom_config_load(void){ +#ifdef DYNAMIC_KEYMAP_ENABLE + enabled_encoder_modes = eeprom_read_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES); +#endif +} + +void via_init_kb(void) +{ + dprintf("VIA is enabled.\n"); + custom_config_load(); +} diff --git a/keyboards/nullbitsco/nibble/keymaps/via/via_extras.h b/keyboards/nullbitsco/nibble/keymaps/via/via_extras.h new file mode 100644 index 0000000000..83c3c13128 --- /dev/null +++ b/keyboards/nullbitsco/nibble/keymaps/via/via_extras.h @@ -0,0 +1,39 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "nibble_encoder.h" +#include "via.h" +#include "raw_hid.h" +#include "dynamic_keymap.h" +#include "tmk_core/common/eeprom.h" + +enum nibble_keyboard_value_id { + id_encoder_modes = 0x80, + id_unused_mode_1, + id_encoder_custom, + id_unused_mode_2 +}; + +// Encoder Behavior +extern uint8_t encoder_value, + encoder_mode, + enabled_encoder_modes; + +void raw_hid_receive_kb(uint8_t *data, uint8_t length), + encoder_update_kb(uint8_t index, bool clockwise), + custom_config_load(void), + via_init_kb(void);
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/matrix.c b/keyboards/nullbitsco/nibble/matrix.c new file mode 100644 index 0000000000..8ec9da2844 --- /dev/null +++ b/keyboards/nullbitsco/nibble/matrix.c @@ -0,0 +1,95 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "quantum.h" + +#define COL_SHIFTER ((uint32_t)1) + +// Column pins +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_MUX_COLS] = MATRIX_COL_MUX_PINS; + +// Internal functions + +static void init_pins(void) { + // Set cols to outputs, low + for (uint8_t pin = 0; pin < MATRIX_MUX_COLS; pin++) { + setPinOutput(col_pins[pin]); + } + + // Unselect cols + for (uint8_t bit = 0; bit < MATRIX_MUX_COLS; bit++) { + writePinLow(col_pins[bit]); + } + + // Set rows to input, pullup + for (uint8_t pin = 0; pin < MATRIX_ROWS; pin++) { + setPinInputHigh(row_pins[pin]); + } +} + +static void select_col(uint8_t col) +{ + for (uint8_t bit = 0; bit < MATRIX_MUX_COLS; bit++) { + uint8_t state = (col & (0b1 << bit)) >> bit; + writePin(col_pins[bit], state); + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) +{ + bool matrix_changed = false; + select_col(current_col); + wait_us(5); + + // Read each row sequentially + for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) + { + matrix_row_t last_row_value = current_matrix[row_index]; + + if (!readPin(row_pins[row_index])) + { + current_matrix[row_index] |= (COL_SHIFTER << current_col); + } + else + { + current_matrix[row_index] &= ~(COL_SHIFTER << current_col); + } + + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) + { + matrix_changed = true; + } + } + + return matrix_changed; +} + +// Matrix scan functions + +void matrix_init_custom(void) { + init_pins(); +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + + //Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(current_matrix, current_col); + } + + return (uint8_t)changed; +}
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/nibble.c b/keyboards/nullbitsco/nibble/nibble.c new file mode 100644 index 0000000000..409edd44a0 --- /dev/null +++ b/keyboards/nullbitsco/nibble/nibble.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "bitc_led.h" + +// Use Bit-C LED to show CAPS LOCK status +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + set_bitc_LED(led_state.caps_lock ? LED_DIM : LED_OFF); + } + return res; +} diff --git a/keyboards/nullbitsco/nibble/nibble.h b/keyboards/nullbitsco/nibble/nibble.h new file mode 100644 index 0000000000..9744ae745c --- /dev/null +++ b/keyboards/nullbitsco/nibble/nibble.h @@ -0,0 +1,63 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#define ___ KC_NO + +#include "quantum.h" +#include "remote_kb.h" + +#define LAYOUT_all( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, K2G, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, K3G, \ + K41, K42, K43, K44, K47, K4A, K4B, K4C, K4D, K4F, K4G \ +) { \ + {K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \ + {K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \ + {K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F, K2G}, \ + {K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, K3F, K3G}, \ + {K41, K42, K43, K44, ___, ___, K47, ___, ___, K4A, K4B, K4C, K4D, ___, K4F, K4G}, \ +} + +#define LAYOUT_ansi( \ + K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, K2G, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, K3G, \ + K41, K42, K43, K44, K47, K4A, K4B, K4C, K4D, K4F, K4G \ +) { \ + {___, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \ + {K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \ + {K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F, K2G}, \ + {K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, K3F, K3G}, \ + {K41, K42, K43, K44, ___, ___, K47, ___, ___, K4A, K4B, K4C, K4D, ___, K4F, K4G}, \ +} + +#define LAYOUT_iso( \ + K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1G, \ + K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K1F, K2F, K2G, \ + K31, K32, K01, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, K3G, \ + K41, K42, K43, K44, K47, K4A, K4B, K4C, K4D, K4F, K4G \ +) { \ + {K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \ + {K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \ + {K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F, K2G}, \ + {K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, K3F, K3G}, \ + {K41, K42, K43, K44, ___, ___, K47, ___, ___, K4A, K4B, K4C, K4D, ___, K4F, K4G}, \ +} diff --git a/keyboards/nullbitsco/nibble/remote_kb.c b/keyboards/nullbitsco/nibble/remote_kb.c new file mode 100644 index 0000000000..2e36f5f22e --- /dev/null +++ b/keyboards/nullbitsco/nibble/remote_kb.c @@ -0,0 +1,177 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* +Remote keyboard is an experimental feature that allows for connecting another +keyboard, macropad, numpad, or accessory without requiring an additional USB connection. +The "remote keyboard" forwards its keystrokes using UART serial over TRRS. Dynamic VUSB +detect allows the keyboard automatically switch to host or remote mode depending on +which is connected to the USB port. + +Possible functionality includes the ability to send data from the host to the remote using +a reverse link, allowing for LED sync, configuration, and more data sharing between devices. +This will require a new communication protocol, as the current one is limited. +*/ + +#include "remote_kb.h" + +uint8_t + msg[UART_MSG_LEN], + msg_idx = 0; + +bool + is_host = true; + +// Private functions + +static bool vbus_detect(void) { + #if defined(__AVR_ATmega32U4__) + //returns true if VBUS is present, false otherwise. + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(10); + return (USBSTA & (1<<VBUS)); //checks state of VBUS + #else + #error vbus_detect is not implemented for this architecure! + #endif +} + +static uint8_t chksum8(const unsigned char *buf, size_t len) { + unsigned int sum; + for (sum = 0 ; len != 0 ; len--) + sum += *(buf++); + return (uint8_t)sum; +} + +static void send_msg(uint16_t keycode, bool pressed) { + msg[IDX_PREAMBLE] = UART_PREAMBLE; + msg[IDX_KCLSB] = (keycode & 0xFF); + msg[IDX_KCMSB] = (keycode >> 8) & 0xFF; + msg[IDX_PRESSED] = pressed; + msg[IDX_CHECKSUM] = chksum8(msg, UART_MSG_LEN-1); + + for (int i=0; i<UART_MSG_LEN; i++) { + uart_putchar(msg[i]); + } +} + +static void print_message_buffer(void) { + for (int i=0; i<UART_MSG_LEN; i++) { + dprintf("msg[%u]: %u\n", i, msg[i]); + } +} + +static void process_uart(void) { + uint8_t chksum = chksum8(msg, UART_MSG_LEN-1); + if (msg[IDX_PREAMBLE] != UART_PREAMBLE || msg[IDX_CHECKSUM] != chksum) { + dprintf("UART checksum mismatch!\n"); + print_message_buffer(); + dprintf("calc checksum: %u\n", chksum); + } else { + uint16_t keycode = (uint16_t)msg[IDX_KCLSB] | ((uint16_t)msg[IDX_KCMSB] << 8); + bool pressed = (bool)msg[IDX_PRESSED]; + if (IS_RM_KC(keycode)) { + keyrecord_t record; + record.event.pressed = pressed; + if (pressed) dprintf("Remote macro: press [%u]\n", keycode); + else dprintf("Remote macro: release [%u]\n", keycode); + process_record_user(keycode, &record); + } else { + if (pressed) { + dprintf("Remote: press [%u]\n", keycode); + register_code(keycode); + } else { + dprintf("Remote: release [%u]\n", keycode); + unregister_code(keycode); + } + } + } +} + +static void get_msg(void) { + while (uart_available()) { + msg[msg_idx] = uart_getchar(); + dprintf("idx: %u, recv: %u\n", msg_idx, msg[msg_idx]); + if (msg_idx == 0 && (msg[msg_idx] != UART_PREAMBLE)) { + dprintf("Byte sync error!\n"); + msg_idx = 0; + } else if (msg_idx == (UART_MSG_LEN-1)) { + process_uart(); + msg_idx = 0; + } else { + msg_idx++; + } + } +} + +static void handle_host_incoming(void) { + get_msg(); +} + +static void handle_host_outgoing(void) { + // for future reverse link use +} + +static void handle_remote_incoming(void) { + // for future reverse link use +} + +static void handle_remote_outgoing(uint16_t keycode, keyrecord_t *record) { + if (IS_HID_KC(keycode) || IS_RM_KC(keycode)) { + dprintf("Remote: send [%u]\n", keycode); + send_msg(keycode, record->event.pressed); + } +} + +// Public functions + +void matrix_init_remote_kb(void) { + uart_init(SERIAL_UART_BAUD); + is_host = vbus_detect(); +} + +void process_record_remote_kb(uint16_t keycode, keyrecord_t *record) { + #if defined (KEYBOARD_HOST) + handle_host_outgoing(); + + #elif defined(KEYBOARD_REMOTE) + handle_remote_outgoing(keycode, record); + + #else //auto check with VBUS + if (is_host) { + handle_host_outgoing(); + } + else { + handle_remote_outgoing(keycode, record); + } + #endif +} + +void matrix_scan_remote_kb(void) { + #if defined(KEYBOARD_HOST) + handle_host_incoming(); + + #elif defined (KEYBOARD_REMOTE) + handle_remote_incoming(); + + #else //auto check with VBUS + if (is_host) { + handle_host_incoming(); + } + else { + handle_remote_incoming(); + } + #endif +} diff --git a/keyboards/nullbitsco/nibble/remote_kb.h b/keyboards/nullbitsco/nibble/remote_kb.h new file mode 100644 index 0000000000..e2b24655b5 --- /dev/null +++ b/keyboards/nullbitsco/nibble/remote_kb.h @@ -0,0 +1,53 @@ +/* Copyright 2020 Jay Greco + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#include "tmk_core/common/uart.h" + +#define SERIAL_UART_BAUD 153600 //low error rate for 32u4 @ 16MHz + +#define UART_PREAMBLE 0x69 +#define UART_MSG_LEN 5 +#define UART_NULL 0 + +#define IDX_PREAMBLE 0 +#define IDX_KCLSB 1 +#define IDX_KCMSB 2 +#define IDX_PRESSED 3 +#define IDX_CHECKSUM 4 + +#define IS_HID_KC(x) ((x > 0) && (x < 0xFF)) +#define IS_RM_KC(x) ((x >= RM_BASE) && (x <= 0xFFFF)) + +#define RM_BASE 0xFFFF-16 +enum remote_macros { + RM_1 = RM_BASE, + RM_2, RM_3, + RM_4, RM_5, + RM_6, RM_7, + RM_8, RM_9, + RM_10, RM_11, + RM_12, RM_13, + RM_14, RM_15, +}; + + +// Public functions +void + matrix_init_remote_kb(void), + process_record_remote_kb(uint16_t keycode, keyrecord_t *record), + matrix_scan_remote_kb(void);
\ No newline at end of file diff --git a/keyboards/nullbitsco/nibble/rules.mk b/keyboards/nullbitsco/nibble/rules.mk new file mode 100644 index 0000000000..683e290866 --- /dev/null +++ b/keyboards/nullbitsco/nibble/rules.mk @@ -0,0 +1,35 @@ +# MCU name +MCU = atmega32u4 + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +ENCODER_ENABLE = yes # Use rotary encoder +LTO_ENABLE = yes # Link-time optimization +CUSTOM_MATRIX = lite # Lite custom matrix + +# Project specific files +SRC += matrix.c \ + bitc_led.c \ + big_led.c \ + remote_kb.c \ + tmk_core/common/uart.c |