diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/chimera_ortho_plus/chimera_ortho_plus.c | 23 | ||||
| -rw-r--r-- | keyboards/chimera_ortho_plus/chimera_ortho_plus.h | 38 | ||||
| -rw-r--r-- | keyboards/chimera_ortho_plus/config.h | 76 | ||||
| -rw-r--r-- | keyboards/chimera_ortho_plus/info.json | 65 | ||||
| -rw-r--r-- | keyboards/chimera_ortho_plus/keymaps/default/config.h | 5 | ||||
| -rw-r--r-- | keyboards/chimera_ortho_plus/keymaps/default/keymap.c | 185 | ||||
| -rw-r--r-- | keyboards/chimera_ortho_plus/matrix.c | 154 | ||||
| -rw-r--r-- | keyboards/chimera_ortho_plus/readme.md | 15 | ||||
| -rw-r--r-- | keyboards/chimera_ortho_plus/rules.mk | 37 |
9 files changed, 598 insertions, 0 deletions
diff --git a/keyboards/chimera_ortho_plus/chimera_ortho_plus.c b/keyboards/chimera_ortho_plus/chimera_ortho_plus.c new file mode 100644 index 0000000000..1972f2a9c3 --- /dev/null +++ b/keyboards/chimera_ortho_plus/chimera_ortho_plus.c @@ -0,0 +1,23 @@ +#include "chimera_ortho_plus.h" + +void uart_init(void) { + SERIAL_UART_INIT(); +} + +void led_init(void) { + setPinOutput(D1); + setPinOutput(F4); + setPinOutput(F5); + writePinHigh(D1); + writePinHigh(F4); + writePinHigh(F5); +} + + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + uart_init(); + led_init(); +} diff --git a/keyboards/chimera_ortho_plus/chimera_ortho_plus.h b/keyboards/chimera_ortho_plus/chimera_ortho_plus.h new file mode 100644 index 0000000000..f75dc61057 --- /dev/null +++ b/keyboards/chimera_ortho_plus/chimera_ortho_plus.h @@ -0,0 +1,38 @@ +#pragma once + +#include "quantum.h" + +#define red_led_off PORTF |= (1<<5) +#define red_led_on PORTF &= ~(1<<5) +#define blu_led_off PORTF |= (1<<4) +#define blu_led_on PORTF &= ~(1<<4) +#define grn_led_off PORTD |= (1<<1) +#define grn_led_on PORTD &= ~(1<<1) + +#define set_led_off red_led_off; grn_led_off; blu_led_off +#define set_led_red red_led_on; grn_led_off; blu_led_off +#define set_led_blue red_led_off; grn_led_off; blu_led_on +#define set_led_green red_led_off; grn_led_on; blu_led_off +#define set_led_yellow red_led_on; grn_led_on; blu_led_off +#define set_led_magenta red_led_on; grn_led_off; blu_led_on +#define set_led_cyan red_led_off; grn_led_on; blu_led_on +#define set_led_white red_led_on; grn_led_on; blu_led_on + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \ + k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \ + k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \ + k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \ + k48, k49, k50, k51 \ +) \ +{ \ + { k03, k40, k26, k15, k28, k01, k42, k31, k20, k33, k08, k10 }, \ + { k00, k37, k14, k27, k16, k36, k47, k19, k32, k21, k46, k11 }, \ + { k12, k25, k02, k39, k17, k49, k50, k18, k44, k09, k34, k23 }, \ + { k24, k13, k38, k04, k05, k48, k51, k06, k07, k45, k22, k35 }, \ + { k29, k41, KC_NO, KC_NO, KC_NO, KC_NO, k30, k43, KC_NO, KC_NO, KC_NO, KC_NO } \ +} diff --git a/keyboards/chimera_ortho_plus/config.h b/keyboards/chimera_ortho_plus/config.h new file mode 100644 index 0000000000..d47c1a7640 --- /dev/null +++ b/keyboards/chimera_ortho_plus/config.h @@ -0,0 +1,76 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xDE1D +#define DEVICE_VER 0x0001 +#define MANUFACTURER unknown +#define PRODUCT Chimera Ortho Plus +#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ortho Plus + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 12 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +#define ONESHOT_TIMEOUT 500 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +//UART settings for communication with the RF microcontroller +#define SERIAL_UART_BAUD 1000000 +#define SERIAL_UART_DATA UDR1 +#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) +#define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX and RX */ \ + UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + } while(0) diff --git a/keyboards/chimera_ortho_plus/info.json b/keyboards/chimera_ortho_plus/info.json new file mode 100644 index 0000000000..7c892c4419 --- /dev/null +++ b/keyboards/chimera_ortho_plus/info.json @@ -0,0 +1,65 @@ +{ + "keyboard_name": "Chimera Ortho Plus", + "keyboard_folder": "chimera_ortho_plus", + "maintainer": "qmk", + "width": 13.5, + "height": 6, + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "{", "x": 0, "y": 0}, + {"label": "1", "x": 1, "y": 0}, + {"label": "2", "x": 2, "y": 0}, + {"label": "3", "x": 3, "y": 0}, + {"label": "4", "x": 4, "y": 0}, + {"label": "5", "x": 5, "y": 0}, + {"label": "6", "x": 7.5, "y": 0}, + {"label": "7", "x": 8.5, "y": 0}, + {"label": "8", "x": 9.5, "y": 0}, + {"label": "9", "x": 10.5, "y": 0}, + {"label": "0", "x": 11.5, "y": 0}, + {"label": "}", "x": 12.5, "y": 0}, + {"label": "Esc", "x": 0, "y": 1}, + {"label": "Q", "x": 1, "y": 1}, + {"label": "W", "x": 2, "y": 1}, + {"label": "E", "x": 3, "y": 1}, + {"label": "R", "x": 4, "y": 1}, + {"label": "T", "x": 5, "y": 1}, + {"label": "Y", "x": 7.5, "y": 1}, + {"label": "U", "x": 8.5, "y": 1}, + {"label": "I", "x": 9.5, "y": 1}, + {"label": "O", "x": 10.5, "y": 1}, + {"label": "P", "x": 11.5, "y": 1}, + {"label": "\"", "x": 12.5, "y": 1}, + {"label": "Tab", "x": 0, "y": 2}, + {"label": "A", "x": 1, "y": 2}, + {"label": "S", "x": 2, "y": 2}, + {"label": "D", "x": 3, "y": 2}, + {"label": "F", "x": 4, "y": 2}, + {"label": "G", "x": 5, "y": 2}, + {"label": "H", "x": 7.5, "y": 2}, + {"label": "J", "x": 8.5, "y": 2}, + {"label": "K", "x": 9.5, "y": 2}, + {"label": "L", "x": 10.5, "y": 2}, + {"label": ";", "x": 11.5, "y": 2}, + {"label": "Enter", "x": 12.5, "y": 2}, + {"label": "(", "x": 0, "y": 3}, + {"label": "Z", "x": 1, "y": 3}, + {"label": "X", "x": 2, "y": 3}, + {"label": "C", "x": 3, "y": 3}, + {"label": "V", "x": 4, "y": 3}, + {"label": "B", "x": 5, "y": 3}, + {"label": "N", "x": 7.5, "y": 3}, + {"label": "M", "x": 8.5, "y": 3}, + {"label": ",", "x": 9.5, "y": 3}, + {"label": ".", "x": 10.5, "y": 3}, + {"label": "/", "x": 11.5, "y": 3}, + {"label": ")", "x": 12.5, "y": 3}, + {"label": "Num Layer", "x": 4, "y": 4}, + {"label": "Back Space", "x": 5, "y": 4}, + {"label": "Space", "x": 7.5, "y": 4}, + {"label": "Symbol Layer", "x": 8.5, "y": 4} + ] + } + } +} diff --git a/keyboards/chimera_ortho_plus/keymaps/default/config.h b/keyboards/chimera_ortho_plus/keymaps/default/config.h new file mode 100644 index 0000000000..bdfd4db80f --- /dev/null +++ b/keyboards/chimera_ortho_plus/keymaps/default/config.h @@ -0,0 +1,5 @@ +#pragma once + +// place overrides here +#define LONGPRESS_DELAY 150 +//#define LAYER_TOGGLE_DELAY 300 diff --git a/keyboards/chimera_ortho_plus/keymaps/default/keymap.c b/keyboards/chimera_ortho_plus/keymaps/default/keymap.c new file mode 100644 index 0000000000..9b45037701 --- /dev/null +++ b/keyboards/chimera_ortho_plus/keymaps/default/keymap.c @@ -0,0 +1,185 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum chimera_ortho_plus_layers { + _QWERTY, + _CAPS, + _NUMPAD, + _SYMBOLS, + _MACROS, + _NAV +}; + +#define KC_NMPD TG(_NUMPAD) +#define KC_SYMB TG(_SYMBOLS) +#define KC_SPFN LT(_NAV,KC_4) +#define KC_SCTL MT(MOD_LCTL, KC_2) +#define KC_SCTR MT(MOD_LCTL, KC_9) +#define KC_SPLT MT(MOD_LALT, KC_3) +#define KC_SPRT MT(MOD_LALT, KC_8) +#define KC_GBRC MT(MOD_RGUI, KC_7) +#define KC_GQOT MT(MOD_LGUI, KC_QUOT) +#define KC_MESC LT(_MACROS, KC_ESC) +#define KC_CAD LALT(LCTL(KC_DEL)) + +enum custom_keycodes { + KC_INCL = SAFE_RANGE, + KC_PULL, + KC_PUSH, + KC_SCAP, + KC_SCOF +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( + //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + KC_LBRC, KC_1 ,KC_SCTL,KC_SPLT,KC_SPFN, KC_5 , KC_6 ,KC_GBRC,KC_SPRT,KC_SCTR, KC_0 ,KC_RBRC, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_MESC, KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_QUOT, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_ENT , + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_LSPO, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSPC, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_NMPD,KC_BSPC, KC_SPC ,KC_SYMB + //|-------------------------------+-------+-------| |-------+-------+-------------------------------| + ), + + [_CAPS] = LAYOUT( + //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + _______,KC_UNDS,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,KC_COLN,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_SCOF,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_SCOF, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______, _______,_______ + //|-------------------------------+-------+-------| |-------+-------+-------------------------------| + ), + + [_NUMPAD] = LAYOUT( + //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,KC_MINS,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,KC_COLN,_______,_______,_______, _______, KC_7 , KC_8 , KC_9 ,KC_ASTR,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,KC_DOT ,_______,_______,_______, _______, KC_4 , KC_5 , KC_6 ,KC_PLUS,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______, KC_1 , KC_2 , KC_3 ,KC_SLSH,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______, _______, KC_0 + //|-------------------------------+-------+-------/ |-------+-------+-------------------------------| + ), + + [_SYMBOLS] = LAYOUT( + //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSLS, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_TILD,KC_EQL ,KC_UNDS,KC_LCBR,KC_RCBR,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , KC_GRV ,KC_PLUS,KC_MINS,KC_LBRC,KC_RBRC,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_PIPE,_______, _______,_______ + //|-------------------------------+-------+-------| |-------+-------+-------------------------------| + ), + + [_MACROS] = LAYOUT( + //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + _______,_______,_______,_______,_______,_______, _______ ,_______,_______,_______,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______ ,_______,KC_INCL,_______,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,KC_CAD ,_______,_______, _______ ,_______,_______,_______,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_SCAP,_______,_______,_______,_______,_______, _______ ,_______,KC_PULL,KC_PUSH,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______, _______,_______ + //|-------------------------------+-------+-------| |-------+-------+-------------------------------| + ), + + [_NAV] = LAYOUT( + //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,KC_PGUP, KC_UP ,KC_PGDN,KC_PSCR,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,KC_DEL , _______,_______ + //|-------------------------------+-------+-------| |-------+-------+-------------------------------| + ) +}; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + /* include some kind of library or header */ + case KC_INCL: + if (record->event.pressed) { + SEND_STRING("#include <>" SS_TAP(X_LEFT)); + } + return false; + case KC_PULL: + if (record->event.pressed) { + SEND_STRING("git pull\n"); + } + return false; + case KC_PUSH: + if (record->event.pressed){ + SEND_STRING("git push\n"); + } + return false; + case KC_SCAP: + if (record->event.pressed){ + layer_on(_CAPS); + tap_code(KC_CAPS); + } + return false; + case KC_SCOF: + if (record->event.pressed){ + layer_off(_CAPS); + tap_code(KC_CAPS); + } + return false; + } + return true; +}; + + +void matrix_scan_user(void) { + uint8_t layer = get_highest_layer(layer_state); + + switch (layer) { + case _QWERTY: + set_led_green; + break; + case _CAPS: + set_led_white; + break; + case _NUMPAD: + set_led_blue; + break; + case _SYMBOLS: + set_led_red; + break; + case _MACROS: + set_led_cyan; + break; + case _NAV: + set_led_magenta; + break; + default: + set_led_green; + break; + } +}; diff --git a/keyboards/chimera_ortho_plus/matrix.c b/keyboards/chimera_ortho_plus/matrix.c new file mode 100644 index 0000000000..ed6eac2b09 --- /dev/null +++ b/keyboards/chimera_ortho_plus/matrix.c @@ -0,0 +1,154 @@ +/* +Copyright 2012 Jun Wako +Copyright 2014 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#if defined(__AVR__) +#include <avr/io.h> +#endif +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "timer.h" + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#elif (MATRIX_COLS <= 16) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop16(matrix[i]) +# define ROW_SHIFTER ((uint16_t)1) +#elif (MATRIX_COLS <= 32) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop32(matrix[i]) +# define ROW_SHIFTER ((uint32_t)1) +#endif + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) { + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) { + return MATRIX_COLS; +} + +void matrix_init(void) { + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) +{ + SERIAL_UART_INIT(); + + uint32_t timeout = 0; + + //the s character requests the RF slave to send the matrix + SERIAL_UART_DATA = 's'; + + //trust the external keystates entirely, erase the last data + uint8_t uart_data[14] = {0}; + + //there are 10 bytes corresponding to 10 columns, and an end byte + for (uint8_t i = 0; i < 14; i++) { + //wait for the serial data, timeout if it's been too long + //this only happened in testing with a loose wire, but does no + //harm to leave it in here + while(!SERIAL_UART_RXD_PRESENT){ + timeout++; + if (timeout > 10000){ + break; + } + } + uart_data[i] = SERIAL_UART_DATA; + } + + //check for the end packet, the key state bytes use the LSBs, so 0xE0 + //will only show up here if the correct bytes were recieved + if (uart_data[10] == 0xE0) + { + //shifting and transferring the keystates to the QMK matrix variable + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; + } + } + + + matrix_scan_quantum(); + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print_matrix_header(); + + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + print_matrix_row(row); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += matrix_bitpop(i); + } + return count; +} diff --git a/keyboards/chimera_ortho_plus/readme.md b/keyboards/chimera_ortho_plus/readme.md new file mode 100644 index 0000000000..ad4cb9d392 --- /dev/null +++ b/keyboards/chimera_ortho_plus/readme.md @@ -0,0 +1,15 @@ +# Chimera Ortho+ + + + +A split wireless 50% ortholinear keyboard. + +* Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle) +* Hardware Supported: Chimera Ortho+ PCB, WaveShare core nRF51822 +* Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ortho_plus/gerbers) + +Make example for this keyboard (after setting up your build environment): + + make chimera_ortho_plus:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/chimera_ortho_plus/rules.mk b/keyboards/chimera_ortho_plus/rules.mk new file mode 100644 index 0000000000..9ee7e4f653 --- /dev/null +++ b/keyboards/chimera_ortho_plus/rules.mk @@ -0,0 +1,37 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +UNICODE_ENABLE = yes +CUSTOM_MATRIX = yes + +# project specific files +SRC = matrix.c |