diff options
Diffstat (limited to 'keyboards')
19 files changed, 170 insertions, 345 deletions
diff --git a/keyboards/s60-x-rgb/config.h b/keyboards/s60-x-rgb/config.h deleted file mode 100644 index 1b98a51d6e..0000000000 --- a/keyboards/s60-x-rgb/config.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Massdrop -#define PRODUCT S60-X RGB -#define DESCRIPTION q.m.k. keyboard firmware for S60-X RGB - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 } -#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B7 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* prevent stuck modifiers */ -#define PREVENT_STUCK_MODIFIERS - -#define RGB_DI_PIN F6 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 10 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif - -#endif
\ No newline at end of file diff --git a/keyboards/s60-x-rgb/keymaps/default/keymap.c b/keyboards/s60-x-rgb/keymaps/default/keymap.c deleted file mode 100644 index 303f07638f..0000000000 --- a/keyboards/s60-x-rgb/keymaps/default/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -#include "s60-x-rgb.h" - -/* 0: Main layer -┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ -│ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ -├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ -│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ -├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ -│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ -├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ -│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ -├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ -│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ -└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -*/ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: ANSI qwerty */ - LEGACY_KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ - CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT , \ - LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, RALT, FN0, APP, RCTL), - -/* 1: Fn layer -┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ -│GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ -├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ -│ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│ -├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ -│ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ -├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ -│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ -├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ -│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ -└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -*/ - LEGACY_KEYMAP( - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ - TRNS, TRNS, UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS, \ - TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; diff --git a/keyboards/s60-x-rgb/keymaps/default/readme.md b/keyboards/s60-x-rgb/keymaps/default/readme.md deleted file mode 100644 index 01cda9df9b..0000000000 --- a/keyboards/s60-x-rgb/keymaps/default/readme.md +++ /dev/null @@ -1,27 +0,0 @@ -### 1 Standard - ANSI -The standard keymap is the one that is pre-flashed on the S60-X. - -#### 1.0 Default layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ -#### 1.1 Fn layer - ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│ - ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│ - └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ diff --git a/keyboards/s60-x-rgb/s60-x-rgb.c b/keyboards/s60-x-rgb/s60-x-rgb.c deleted file mode 100644 index 39d3a70e86..0000000000 --- a/keyboards/s60-x-rgb/s60-x-rgb.c +++ /dev/null @@ -1 +0,0 @@ -#include "s60-x-rgb.h" diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile index 4e2a6f00fd..879e493a21 100644 --- a/keyboards/s60-x/Makefile +++ b/keyboards/s60-x/Makefile @@ -1,3 +1,5 @@ +SUBPROJECT_DEFAULT = default + ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h index ac7951c247..8e7bc78be2 100644 --- a/keyboards/s60-x/config.h +++ b/keyboards/s60-x/config.h @@ -27,138 +27,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 #define MANUFACTURER Massdrop -#define PRODUCT S60-X -#define DESCRIPTION q.m.k. keyboard firmware for S60-X /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 } -#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 } -#define UNUSED_PINS { F0 } - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ +/* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -#define NO_ACTION_ONESHOT -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION - #endif diff --git a/keyboards/s60-x/default/Makefile b/keyboards/s60-x/default/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/s60-x/default/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/s60-x/default/config.h b/keyboards/s60-x/default/config.h new file mode 100644 index 0000000000..436c6fa8b6 --- /dev/null +++ b/keyboards/s60-x/default/config.h @@ -0,0 +1,25 @@ +#ifndef DEFAULT_CONFIG_H +#define DEFAULT_CONFIG_H + +#include "../config.h" + +#define PRODUCT S60-X +#define DESCRIPTION q.m.k. keyboard firmware for S60-X + +#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 } +#define UNUSED_PINS { F0 } + +#define LOCKING_SUPPORT_ENABLE +#define LOCKING_RESYNC_ENABLE + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/s60-x/default/default.c b/keyboards/s60-x/default/default.c new file mode 100644 index 0000000000..253f5495c2 --- /dev/null +++ b/keyboards/s60-x/default/default.c @@ -0,0 +1,28 @@ +#include "default.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/s60-x/default/default.h b/keyboards/s60-x/default/default.h new file mode 100644 index 0000000000..86233ef7e0 --- /dev/null +++ b/keyboards/s60-x/default/default.h @@ -0,0 +1,69 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> +Copyright 2015 Vin�cius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com> +Copyright 2016 Felix Uhl <ifreilicht@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef DEFAULT_H +#define DEFAULT_H + +#include "quantum.h" + +#ifdef __INTELLISENSE__ +#define PROGMEM +#include "../config.h" +#endif + +/* S60-X keymap definition macro +* K31 is the extra key next to short left ISO shift +* K2C is the moved key next to enter on ISO boards +* K3C is the extra key next to short right JIS shift +* K0D is extra key from split backspace +* K3E is extra key from HHKB-style split right shift +*/ + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO } \ +} + +/*This special definition is used for S60-X keymaps that were ported from TMK + * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended + */ +#define LEGACY_KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/s60-x/default/rules.mk b/keyboards/s60-x/default/rules.mk new file mode 100644 index 0000000000..b8ff762607 --- /dev/null +++ b/keyboards/s60-x/default/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE ?= no
\ No newline at end of file diff --git a/keyboards/s60-x-rgb/keymaps/dbroqua/keymap.c b/keyboards/s60-x/keymaps/dbroqua/keymap.c index 210e284622..940119e52f 100644 --- a/keyboards/s60-x-rgb/keymaps/dbroqua/keymap.c +++ b/keyboards/s60-x/keymaps/dbroqua/keymap.c @@ -1,4 +1,4 @@ -#include "s60-x-rgb.h" +#include "s60-x.h" #define _DEFAULT 0 #define _FN 1 diff --git a/keyboards/s60-x-rgb/Makefile b/keyboards/s60-x/rgb/Makefile index 57b2ef62e5..bd09e5885d 100644 --- a/keyboards/s60-x-rgb/Makefile +++ b/keyboards/s60-x/rgb/Makefile @@ -1,3 +1,3 @@ ifndef MAKEFILE_INCLUDED - include ../../Makefile + include ../../../Makefile endif diff --git a/keyboards/s60-x/rgb/config.h b/keyboards/s60-x/rgb/config.h new file mode 100644 index 0000000000..26b246e573 --- /dev/null +++ b/keyboards/s60-x/rgb/config.h @@ -0,0 +1,31 @@ +#ifndef RBG_CONFIG_H +#define RBG_CONFIG_H + +#include "../config.h" + +#define PRODUCT S60-X-RGB +#define DESCRIPTION q.m.k. keyboard firmware for S60-X RGB + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 } + +/* number of backlight levels */ +#define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + +#define RGB_DI_PIN F6 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 10 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif
\ No newline at end of file diff --git a/keyboards/s60-x/rgb/rgb.c b/keyboards/s60-x/rgb/rgb.c new file mode 100644 index 0000000000..0117e14ae5 --- /dev/null +++ b/keyboards/s60-x/rgb/rgb.c @@ -0,0 +1 @@ +#include "rgb.h" diff --git a/keyboards/s60-x-rgb/s60-x-rgb.h b/keyboards/s60-x/rgb/rgb.h index cb7a5f567f..cb7a5f567f 100644 --- a/keyboards/s60-x-rgb/s60-x-rgb.h +++ b/keyboards/s60-x/rgb/rgb.h diff --git a/keyboards/s60-x-rgb/rules.mk b/keyboards/s60-x/rgb/rules.mk index c303af4bcc..c303af4bcc 100644 --- a/keyboards/s60-x-rgb/rules.mk +++ b/keyboards/s60-x/rgb/rules.mk diff --git a/keyboards/s60-x/s60-x.c b/keyboards/s60-x/s60-x.c index 417358140c..f031dd770d 100644 --- a/keyboards/s60-x/s60-x.c +++ b/keyboards/s60-x/s60-x.c @@ -1,28 +1 @@ -#include "s60-x.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} +#include "s60-x.h"
\ No newline at end of file diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h index 29a2a27b22..5bf8cfcefa 100644 --- a/keyboards/s60-x/s60-x.h +++ b/keyboards/s60-x/s60-x.h @@ -1,69 +1,13 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> -Copyright 2015 Vincius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com> -Copyright 2016 Felix Uhl <ifreilicht@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - #ifndef S60X_H #define S60X_H -#include "quantum.h" - -#ifdef __INTELLISENSE__ -#define PROGMEM -#include "config.h" +#ifdef SUBPROJECT_default + #include "default.h" +#endif +#ifdef SUBPROJECT_rgb + #include "rgb.h" #endif -/* S60-X keymap definition macro -* K31 is the extra key next to short left ISO shift -* K2C is the moved key next to enter on ISO boards -* K3C is the extra key next to short right JIS shift -* K0D is extra key from split backspace -* K3E is extra key from HHKB-style split right shift -*/ - -#define KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO } \ -} - -/*This special definition is used for S60-X keymaps that were ported from TMK - * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended - */ -#define LEGACY_KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO } \ -} +#include "quantum.h" #endif |