diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/ergodox_infinity/rules.mk | 44 | ||||
| -rw-r--r-- | keyboards/handwired/onekey/teensy_32/rules.mk | 44 | ||||
| -rw-r--r-- | keyboards/handwired/onekey/teensy_lc/rules.mk | 44 | ||||
| -rw-r--r-- | keyboards/infinity60/rules.mk | 36 | ||||
| -rw-r--r-- | keyboards/k_type/rules.mk | 43 | ||||
| -rw-r--r-- | keyboards/whitefox/rules.mk | 40 |
6 files changed, 27 insertions, 224 deletions
diff --git a/keyboards/ergodox_infinity/rules.mk b/keyboards/ergodox_infinity/rules.mk index 329ea8b988..31bc20454c 100644 --- a/keyboards/ergodox_infinity/rules.mk +++ b/keyboards/ergodox_infinity/rules.mk @@ -1,15 +1,5 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x +# MCU name +MCU = MK20DX256 # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ @@ -23,32 +13,6 @@ MCU_SERIES = K20x # - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader MCU_LDSCRIPT = MK20DX256BLDR8 -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity 60% -# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox -MCU_STARTUP = k20x7 - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -#BOARD = MCHCK_K20 -BOARD = PJRC_TEENSY_3_1 - -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - # Vector table for application # 0x00000000-0x00001000 area is occupied by bootlaoder.*/ # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB @@ -92,4 +56,8 @@ LED_DRIVER = is31fl3731c LED_WIDTH = 7 LED_HEIGHT = 7 +# project specific files +SRC = matrix.c \ + led.c + LAYOUTS = ergodox diff --git a/keyboards/handwired/onekey/teensy_32/rules.mk b/keyboards/handwired/onekey/teensy_32/rules.mk index 2c411c0eb6..c1b90d0d2b 100644 --- a/keyboards/handwired/onekey/teensy_32/rules.mk +++ b/keyboards/handwired/onekey/teensy_32/rules.mk @@ -1,45 +1,5 @@ -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -MCU_FAMILY = KINETIS -MCU_SERIES = K20x - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -MCU_LDSCRIPT = MK20DX256 - -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = k20x7 - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -BOARD = PJRC_TEENSY_3_1 - -# Cortex version -# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - +# MCU name +MCU = MK20DX256 # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/onekey/teensy_lc/rules.mk b/keyboards/handwired/onekey/teensy_lc/rules.mk index 32ab07d9c1..c307307252 100644 --- a/keyboards/handwired/onekey/teensy_lc/rules.mk +++ b/keyboards/handwired/onekey/teensy_lc/rules.mk @@ -1,45 +1,5 @@ -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -MCU_FAMILY = KINETIS -MCU_SERIES = KL2x - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -MCU_LDSCRIPT = MKL26Z64 - -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = kl2x - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -BOARD = PJRC_TEENSY_LC - -# Cortex version -# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 -MCU = cortex-m0plus - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 6 - +# MCU name +MCU = MKL26Z64 # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk index f93766af97..579eab0f3f 100644 --- a/keyboards/infinity60/rules.mk +++ b/keyboards/infinity60/rules.mk @@ -1,16 +1,5 @@ -# project specific files -SRC = matrix.c \ - led.c \ - led_controller.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x +# MCU name +MCU = MK20DX128 # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ @@ -23,14 +12,6 @@ MCU_SERIES = K20x # - MK20DX128BLDR4 for Infinity with Kiibohd bootloader MCU_LDSCRIPT = MK20DX128BLDR4 -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity KB -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = k20x5 - # Board: it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards # - BOARD = @@ -40,14 +21,6 @@ MCU_STARTUP = k20x5 # - MCHCK_K20 for Infinity KB BOARD = MCHCK_K20 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - # Vector table for application # 0x00000000-0x00001000 area is occupied by bootlaoder.*/ # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB @@ -72,6 +45,11 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover CUSTOM_MATRIX = yes # Custom matrix file +# project specific files +SRC = matrix.c \ + led.c \ + led_controller.c + LAYOUTS = 60_ansi_split_bs_rshift diff --git a/keyboards/k_type/rules.mk b/keyboards/k_type/rules.mk index e53f316b99..56c4c606e3 100644 --- a/keyboards/k_type/rules.mk +++ b/keyboards/k_type/rules.mk @@ -1,14 +1,5 @@ -# project specific files -SRC = matrix.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x +# MCU name +MCU = MK20DX256 # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ @@ -22,40 +13,12 @@ MCU_SERIES = K20x # - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader MCU_LDSCRIPT = MK20DX256BLDR8 -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity KB -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = k20x7 - # Board: it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB - # This board was copied from PJRC_TEENSY_3_1. The only difference should be a # hack to ensure the watchdog has started before trying to disable it. BOARD = IC_TEENSY_3_1 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootloader.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -#OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 -OPT_DEFS = - DFU_ARGS = -d 1c11:b007 DFU_SUFFIX_ARGS = -p b007 -v 1c11 @@ -75,6 +38,8 @@ NKRO_ENABLE = yes # USB Nkey Rollover CUSTOM_MATRIX = yes # Custom matrix file DEBUG_ENABLE = yes +# project specific files +SRC = matrix.c # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk index 27c3c31416..14507e9dd2 100644 --- a/keyboards/whitefox/rules.mk +++ b/keyboards/whitefox/rules.mk @@ -1,15 +1,5 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x +# MCU name +MCU = MK20DX256 # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ @@ -23,14 +13,6 @@ MCU_SERIES = K20x # - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader MCU_LDSCRIPT = MK20DX256BLDR8 -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity KB -# - k20x7 for Teensy 3.1 and 3.2 -MCU_STARTUP = k20x7 - # Board: it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards # - BOARD = @@ -40,20 +22,6 @@ MCU_STARTUP = k20x7 # - MCHCK_K20 for Infinity KB BOARD = IC_TEENSY_3_1 -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 -OPT_DEFS = - DFU_ARGS = -d 1c11:b007 DFU_SUFFIX_ARGS = -p b007 -v 1c11 @@ -75,6 +43,10 @@ BACKLIGHT_ENABLE = yes BACKLIGHT_DRIVER = custom VISUALIZER_ENABLE = yes +# project specific files +SRC = matrix.c \ + led.c + LED_DRIVER = is31fl3731c LED_WIDTH = 16 LED_HEIGHT = 5 |