summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/snagpad/config.h26
-rw-r--r--keyboards/snagpad/keymaps/via/keymap.c76
-rw-r--r--keyboards/snagpad/keymaps/via/rules.mk76
3 files changed, 176 insertions, 2 deletions
diff --git a/keyboards/snagpad/config.h b/keyboards/snagpad/config.h
index a14ead67fb..03906f33f5 100644
--- a/keyboards/snagpad/config.h
+++ b/keyboards/snagpad/config.h
@@ -3,8 +3,8 @@
#include "config_common.h"
/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
+#define VENDOR_ID 0x4443 // "DC" = Don Chiou
+#define PRODUCT_ID 0x5350 // "SP" = Snagpad
#define DEVICE_VER 0x0001
#define MANUFACTURER Flehrad
#define PRODUCT Snagpad
@@ -54,3 +54,25 @@
#define RGBLIGHT_VAL_STEP 8
#endif
+// Does not use WT_MONO_BACKLIGHT
+// #define WT_MONO_BACKLIGHT
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*5*4*2)) = (35+160)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 195
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 829
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16 \ No newline at end of file
diff --git a/keyboards/snagpad/keymaps/via/keymap.c b/keyboards/snagpad/keymaps/via/keymap.c
new file mode 100644
index 0000000000..7fa226de77
--- /dev/null
+++ b/keyboards/snagpad/keymaps/via/keymap.c
@@ -0,0 +1,76 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ LAYOUT_ortho_5x4(
+ KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_P4, KC_P5, KC_P6, KC_PPLS,
+ KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_P0, KC_P0, KC_PDOT, KC_PENT),
+
+ LAYOUT_ortho_5x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ LAYOUT_ortho_5x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ LAYOUT_ortho_5x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+};
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+ if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+ } else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+ } else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+ } else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+ } else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_KANA)) {
+
+ } else {
+
+ }
+
+}
diff --git a/keyboards/snagpad/keymaps/via/rules.mk b/keyboards/snagpad/keymaps/via/rules.mk
new file mode 100644
index 0000000000..032d68c5e9
--- /dev/null
+++ b/keyboards/snagpad/keymaps/via/rules.mk
@@ -0,0 +1,76 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = caterina
+
+# Boot Section Size in *bytes*
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# This is the VIA magic
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+SRC += keyboards/wilba_tech/wt_main.c
+
+LAYOUTS = ortho_5x4 numpad_5x4