diff options
Diffstat (limited to 'keyboards')
18 files changed, 236 insertions, 1239 deletions
diff --git a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.c deleted file mode 100644 index 7c09bd997c..0000000000 --- a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include "hal.h" -#include "stm32_gpio.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - extern void enter_bootloader_mode_if_requested(void); - enter_bootloader_mode_if_requested(); - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; - SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); -} diff --git a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.h deleted file mode 100644 index 173f7b6054..0000000000 --- a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.h +++ /dev/null @@ -1,923 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/* - * Setup for ST STM32F072B-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32F072B_DISCOVERY -#define BOARD_NAME "ST STM32F072B-Discovery" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F072xB - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0U -#define GPIOA_PIN1 1U -#define GPIOA_PIN2 2U -#define GPIOA_PIN3 3U -#define GPIOA_PIN4 4U -#define GPIOA_PIN5 5U -#define GPIOA_PIN6 6U -#define GPIOA_PIN7 7U -#define GPIOA_PIN8 8U -#define GPIOA_PIN9 9U -#define GPIOA_PIN10 10U -#define GPIOA_USB_DM 11U -#define GPIOA_USB_DP 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_PIN15 15U - -#define GPIOB_PIN0 0U -#define GPIOB_PIN1 1U -#define GPIOB_PIN2 2U -#define GPIOB_PIN3 3U -#define GPIOB_PIN4 4U -#define GPIOB_PIN5 5U -#define GPIOB_PIN6 6U -#define GPIOB_PIN7 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_SPI2_SCK 13U -#define GPIOB_SPI2_MISO 14U -#define GPIOB_SPI2_MOSI 15U - -#define GPIOC_MEMS_CS 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_LED_RED 6U -#define GPIOC_LED_BLUE 7U -#define GPIOC_LED_ORANGE 8U -#define GPIOC_LED_GREEN 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_OSC32_IN 14U -#define GPIOC_OSC32_OUT 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_OSC_IN 0U -#define GPIOF_OSC_OUT 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_BUTTON PAL_LINE(GPIOA, 0U) -#define LINE_USB_DM PAL_LINE(GPIOA, 11U) -#define LINE_USB_DP PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) - -#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) -#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) -#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) - -#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) -#define LINE_LED_RED PAL_LINE(GPIOC, 6U) -#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) -#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) -#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) -#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) -#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) - - - -#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) -#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - USB_DM (input floating). - * PA12 - USB_DP (input floating). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_USB_DM) | \ - PIN_MODE_INPUT(GPIOA_USB_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ - PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_USB_DM) | \ - PIN_ODR_HIGH(GPIOA_USB_DP) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ - PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0U)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - SPI2_SCK (alternate 0). - * PB14 - SPI2_MISO (alternate 0). - * PB15 - SPI2_MOSI (alternate 0). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ - PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ - PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_PIN3) | \ - PIN_OSPEED_HIGH(GPIOB_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ - PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ - PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ - PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ - PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) - -/* - * GPIOC setup: - * - * PC0 - MEMS_CS (output pushpull maximum). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - LED_RED (output pushpull maximum). - * PC7 - LED_BLUE (output pushpull maximum). - * PC8 - LED_ORANGE (output pushpull maximum). - * PC9 - LED_GREEN (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ - PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ - PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ - PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ - PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ - PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ - PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ - PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_LOW(GPIOC_LED_RED) | \ - PIN_ODR_LOW(GPIOC_LED_BLUE) | \ - PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ - PIN_ODR_LOW(GPIOC_LED_GREEN) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ - PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ - PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ - PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ - PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ - PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ - PIN_OSPEED_VERYLOW(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ - PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ - PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.mk deleted file mode 100644 index b98dcdd26c..0000000000 --- a/keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY diff --git a/keyboards/candybar/config.h b/keyboards/candybar/lefty/config.h index c153967130..c153967130 100644 --- a/keyboards/candybar/config.h +++ b/keyboards/candybar/lefty/config.h diff --git a/keyboards/candybar/info.json b/keyboards/candybar/lefty/info.json index 9cf4216aa1..1ef3dcd54a 100644 --- a/keyboards/candybar/info.json +++ b/keyboards/candybar/lefty/info.json @@ -7,13 +7,6 @@ "layouts": { "LAYOUT": { "layout": [ - {"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Del", "x":11, "y":0}, {"label":"BkSp", "x":12, "y":0}, {"label":"7", "x":13, "y":0}, {"label":"8", "x":14, "y":0}, {"label":"9", "x":15, "y":0}, {"label":"*", "x":16, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"4", "x":13, "y":1}, {"label":"5", "x":14, "y":1}, {"label":"6", "x":15, "y":1}, {"label":"-", "x":16, "y":1}, - {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"Shift", "x":10.75, "y":2, "w":1.25}, {"label":"↑", "x":12, "y":2}, {"label":"1", "x":13, "y":2}, {"label":"2", "x":14, "y":2}, {"label":"3", "x":15, "y":2}, {"label":"+", "x":16, "y":2}, - {"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"GUI", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1}, {"label":"Backspace", "x":6.5, "y":3, "w":2.25}, {"label":"Menu", "x":8.75, "y":3, "w":1.25}, {"label":"Fn", "x":10, "y":3}, {"label":"←", "x":11, "y":3}, {"label":"↓", "x":12, "y":3}, {"label":"→", "x":13, "y":3}, {"label":"0", "x":14, "y":3}, {"label":".", "x":15, "y":3}, {"label":"Enter", "x":16, "y":3}] - }, - "LAYOUT_lefty": { - "layout": [ {"label":"7", "x":0, "y":0}, {"label":"8", "x":1, "y":0}, {"label":"9", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"Esc", "x":4, "y":0}, {"label":"Q", "x":5, "y":0}, {"label":"W", "x":6, "y":0}, {"label":"E", "x":7, "y":0}, {"label":"R", "x":8, "y":0}, {"label":"T", "x":9, "y":0}, {"label":"Y", "x":10, "y":0}, {"label":"U", "x":11, "y":0}, {"label":"I", "x":12, "y":0}, {"label":"O", "x":13, "y":0}, {"label":"P", "x":14, "y":0}, {"label":"{", "x":15, "y":0}, {"label":"}", "x":16, "y":0}, {"label":"4", "x":0, "y":1}, {"label":"5", "x":1, "y":1}, {"label":"6", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"Tab", "x":4, "y":1, "w":1.25}, {"label":"A", "x":5.25, "y":1}, {"label":"S", "x":6.25, "y":1}, {"label":"D", "x":7.25, "y":1}, {"label":"F", "x":8.25, "y":1}, {"label":"G", "x":9.25, "y":1}, {"label":"H", "x":10.25, "y":1}, {"label":"J", "x":11.25, "y":1}, {"label":"K", "x":12.25, "y":1}, {"label":"L", "x":13.25, "y":1}, {"label":":", "x":14.25, "y":1}, {"label":"Enter", "x":15.25, "y":1, "w":1.75}, {"label":"1", "x":0, "y":2}, {"label":"2", "x":1, "y":2}, {"label":"3", "x":2, "y":2}, {"x":3, "y":2}, {"label":"Shift", "x":4, "y":2, "w":1.75}, {"label":"Z", "x":5.75, "y":2}, {"label":"X", "x":6.75, "y":2}, {"label":"C", "x":7.75, "y":2}, {"label":"V", "x":8.75, "y":2}, {"label":"B", "x":9.75, "y":2}, {"label":"N", "x":10.75, "y":2}, {"label":"M", "x":11.75, "y":2}, {"label":"<", "x":12.75, "y":2}, {"label":">", "x":13.75, "y":2}, {"label":"\u2191", "x":14.75, "y":2}, {"label":"Shift", "x":15.75, "y":2, "w":1.25}, diff --git a/keyboards/candybar/keymaps/lefty/keymap.c b/keyboards/candybar/lefty/keymaps/default/keymap.c index 34cb55be35..153fd99c50 100644 --- a/keyboards/candybar/keymaps/lefty/keymap.c +++ b/keyboards/candybar/lefty/keymaps/default/keymap.c @@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ -[_BL] = LAYOUT_lefty( +[_BL] = LAYOUT( KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , \ KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , \ KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , \ @@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _FL: Function Layer */ - [_FL] = LAYOUT_lefty( + [_FL] = LAYOUT( KC_P7 , KC_P8, KC_P9 , KC_VOLU, RESET , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SLCK, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NLCK, KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ diff --git a/keyboards/candybar/candybar.c b/keyboards/candybar/lefty/lefty.c index c79e536ccc..920811b833 100644 --- a/keyboards/candybar/candybar.c +++ b/keyboards/candybar/lefty/lefty.c @@ -14,7 +14,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "candybar.h" +#include "lefty.h" void matrix_init_kb(void) { matrix_init_user(); diff --git a/keyboards/candybar/candybar.h b/keyboards/candybar/lefty/lefty.h index b7a9ef4565..07af4b31bd 100644 --- a/keyboards/candybar/candybar.h +++ b/keyboards/candybar/lefty/lefty.h @@ -17,19 +17,8 @@ #pragma once #include "quantum.h" -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, k1d, k1e, k1f, k1g, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \ - k30, k31, k32, k35, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \ -) { \ - { k00, k01 , k02, k03 , k04 , k05, k06 , k07, k08, k09, k0a, k0b , k0c, k0d, k0e, k0f, k0g } , \ - { k10, k11 , k12, k13 , k14 , k15, k16 , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g } , \ - { k20, KC_NO, k22, k23 , k24 , k25, k26 , k27, k28, k29, k2a, k2b , k2c, k2d, k2e, k2f, k2g } , \ - { k30, k31 , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b , k3c, k3d, k3e, k3f, k3g } \ -} -#define LAYOUT_lefty( \ +#define LAYOUT( \ k0d, k0e, k0f, k0g, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ k1d, k1e, k1f, k1g, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \ k2d, k2e, k2f, k2g, k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ @@ -40,5 +29,3 @@ { k20, KC_NO, k22, k23 , k24 , k25, k26 , k27, k28, k29, k2a, k2b , k2c, k2d, k2e, k2f, k2g } , \ { k30, k31 , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b , k3c, k3d, k3e, k3f, k3g } \ } - -#define LAYOUT_righty LAYOUT diff --git a/keyboards/candybar/lefty/readme.md b/keyboards/candybar/lefty/readme.md new file mode 100644 index 0000000000..5954720679 --- /dev/null +++ b/keyboards/candybar/lefty/readme.md @@ -0,0 +1,15 @@ +# The Key Company Candybar + + + +The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller. + +* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/) +* Hardware Supported: TKC Candybar +* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar) + +Make example for this keyboard (after setting up your build environment): + + make candybar/lefty:default:dfu-util + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/candybar/rules.mk b/keyboards/candybar/lefty/rules.mk index 4e89dbf477..cb1b832886 100644 --- a/keyboards/candybar/rules.mk +++ b/keyboards/candybar/lefty/rules.mk @@ -1,6 +1,5 @@ # MCU name MCU = STM32F072 -BOARD = ST_STM32F072B_DISCOVERY # Build Options # comment out to disable the options. diff --git a/keyboards/candybar/readme.md b/keyboards/candybar/readme.md deleted file mode 100644 index 6e0fa02857..0000000000 --- a/keyboards/candybar/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -The Key Company Candybar -=== - - - - -The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller. - -Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/) -Hardware Supported: TKC Candybar -Hardware Availability: Via GB - - -Make example for this keyboard (after setting up your build environment): - - make candybar:default:dfu-util - -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/candybar/righty/config.h b/keyboards/candybar/righty/config.h new file mode 100644 index 0000000000..c153967130 --- /dev/null +++ b/keyboards/candybar/righty/config.h @@ -0,0 +1,115 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0006 +#define MANUFACTURER The Key Company +#define PRODUCT Candybar +#define DESCRIPTION A compact staggered 40% keyboard with attached numpad + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 17 +#define DIODE_DIRECTION COL2ROW +#define MATRIX_ROW_PINS { A8, A9, A10, A13 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 } + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +// #define WS2812_LED_N 2 +// #define RGBLED_NUM WS2812_LED_N +// #define WS2812_TIM_N 2 +// #define WS2812_TIM_CH 2 +// #define PORT_WS2812 GPIOA +// #define PIN_WS2812 1 +// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) +//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP +//#define WS2812_EXTERNAL_PULLUP diff --git a/keyboards/candybar/righty/info.json b/keyboards/candybar/righty/info.json new file mode 100644 index 0000000000..81dc4f8ec5 --- /dev/null +++ b/keyboards/candybar/righty/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "TKC Candybar", + "url": "", + "maintainer": "terrymathews", + "width": 17, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Del", "x":11, "y":0}, {"label":"BkSp", "x":12, "y":0}, {"label":"7", "x":13, "y":0}, {"label":"8", "x":14, "y":0}, {"label":"9", "x":15, "y":0}, {"label":"*", "x":16, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"4", "x":13, "y":1}, {"label":"5", "x":14, "y":1}, {"label":"6", "x":15, "y":1}, {"label":"-", "x":16, "y":1}, + {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"Shift", "x":10.75, "y":2, "w":1.25}, {"label":"↑", "x":12, "y":2}, {"label":"1", "x":13, "y":2}, {"label":"2", "x":14, "y":2}, {"label":"3", "x":15, "y":2}, {"label":"+", "x":16, "y":2}, + {"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"GUI", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1}, {"label":"Backspace", "x":6.5, "y":3, "w":2.25}, {"label":"Menu", "x":8.75, "y":3, "w":1.25}, {"label":"Fn", "x":10, "y":3}, {"label":"←", "x":11, "y":3}, {"label":"↓", "x":12, "y":3}, {"label":"→", "x":13, "y":3}, {"label":"0", "x":14, "y":3}, {"label":".", "x":15, "y":3}, {"label":"Enter", "x":16, "y":3}] + } + } +} diff --git a/keyboards/candybar/keymaps/default/keymap.c b/keyboards/candybar/righty/keymaps/default/keymap.c index 8f4cc08c74..8f4cc08c74 100644 --- a/keyboards/candybar/keymaps/default/keymap.c +++ b/keyboards/candybar/righty/keymaps/default/keymap.c diff --git a/keyboards/candybar/righty/readme.md b/keyboards/candybar/righty/readme.md new file mode 100644 index 0000000000..d3aa867303 --- /dev/null +++ b/keyboards/candybar/righty/readme.md @@ -0,0 +1,15 @@ +# The Key Company Candybar + + + +The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller. + +* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/) +* Hardware Supported: TKC Candybar +* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar) + +Make example for this keyboard (after setting up your build environment): + + make candybar/righty:default:dfu-util + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/candybar/righty/righty.c b/keyboards/candybar/righty/righty.c new file mode 100644 index 0000000000..c3b6115747 --- /dev/null +++ b/keyboards/candybar/righty/righty.c @@ -0,0 +1,17 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "righty.h" diff --git a/keyboards/candybar/righty/righty.h b/keyboards/candybar/righty/righty.h new file mode 100644 index 0000000000..67e0238839 --- /dev/null +++ b/keyboards/candybar/righty/righty.h @@ -0,0 +1,30 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "quantum.h" + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, k1d, k1e, k1f, k1g, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \ + k30, k31, k32, k35, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \ +) { \ + { k00, k01 , k02, k03 , k04 , k05, k06 , k07, k08, k09, k0a, k0b , k0c, k0d, k0e, k0f, k0g } , \ + { k10, k11 , k12, k13 , k14 , k15, k16 , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g } , \ + { k20, KC_NO, k22, k23 , k24 , k25, k26 , k27, k28, k29, k2a, k2b , k2c, k2d, k2e, k2f, k2g } , \ + { k30, k31 , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b , k3c, k3d, k3e, k3f, k3g } \ +} diff --git a/keyboards/candybar/righty/rules.mk b/keyboards/candybar/righty/rules.mk new file mode 100644 index 0000000000..cb1b832886 --- /dev/null +++ b/keyboards/candybar/righty/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = STM32F072 + +# Build Options +# comment out to disable the options. +# +# EXTRAFLAGS+=-flto +LINK_TIME_OPTIMIZATION_ENABLE = yes +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no +SERIAL_LINK_ENABLE = no + + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE |