diff options
Diffstat (limited to 'keyboards')
95 files changed, 1873 insertions, 1135 deletions
diff --git a/keyboards/ada/infinity81/config.h b/keyboards/ada/infinity81/config.h new file mode 100644 index 0000000000..1cbce84720 --- /dev/null +++ b/keyboards/ada/infinity81/config.h @@ -0,0 +1,126 @@ +// Copyright 2022 peepeetee (@peepeetee) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xADA0 +#define PRODUCT_ID 0x0081 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ada +#define PRODUCT infinity81 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B3, B2, B1, B0, F6, B7 } +#define MATRIX_COL_PINS { D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F5, F1, F4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D0 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 107 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ada/infinity81/infinity81.c b/keyboards/ada/infinity81/infinity81.c new file mode 100644 index 0000000000..7e20a1d705 --- /dev/null +++ b/keyboards/ada/infinity81/infinity81.c @@ -0,0 +1,4 @@ +// Copyright 2022 peepeetee (@peepeetee) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "infinity81.h" diff --git a/keyboards/ada/infinity81/infinity81.h b/keyboards/ada/infinity81/infinity81.h new file mode 100644 index 0000000000..199c6f3642 --- /dev/null +++ b/keyboards/ada/infinity81/infinity81.h @@ -0,0 +1,30 @@ +// Copyright 2022 peepeetee (@peepeetee) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \ + K500, K501, K502, K505, K510, K511, K512, K513, K514 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, KC_NO }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414 }, \ + { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514 } \ +} diff --git a/keyboards/ada/infinity81/info.json b/keyboards/ada/infinity81/info.json new file mode 100644 index 0000000000..71fb774721 --- /dev/null +++ b/keyboards/ada/infinity81/info.json @@ -0,0 +1,92 @@ +{ + "keyboard_name": "infinity81", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [ + { "label": "K00 (B3,D1)", "x": 0, "y": 0 }, + { "label": "K01 (B3,D2)", "x": 1.25, "y": 0 }, + { "label": "K02 (B3,D3)", "x": 2.25, "y": 0 }, + { "label": "K03 (B3,D5)", "x": 3.25, "y": 0 }, + { "label": "K04 (B3,D4)", "x": 4.25, "y": 0 }, + { "label": "K05 (B3,D6)", "x": 5.5, "y": 0 }, + { "label": "K06 (B3,D7)", "x": 6.5, "y": 0 }, + { "label": "K07 (B3,B4)", "x": 7.5, "y": 0 }, + { "label": "K08 (B3,B5)", "x": 8.5, "y": 0 }, + { "label": "K09 (B3,B6)", "x": 9.75, "y": 0 }, + { "label": "K0A (B3,C6)", "x": 10.75, "y": 0 }, + { "label": "K0B (B3,C7)", "x": 11.75, "y": 0 }, + { "label": "K0C (B3,F5)", "x": 12.75, "y": 0 }, + { "label": "K10 (B2,D1)", "x": 0, "y": 1.25 }, + { "label": "K11 (B2,D2)", "x": 1, "y": 1.25 }, + { "label": "K12 (B2,D3)", "x": 2, "y": 1.25 }, + { "label": "K13 (B2,D5)", "x": 3, "y": 1.25 }, + { "label": "K14 (B2,D4)", "x": 4, "y": 1.25 }, + { "label": "K15 (B2,D6)", "x": 5, "y": 1.25 }, + { "label": "K16 (B2,D7)", "x": 6, "y": 1.25 }, + { "label": "K17 (B2,B4)", "x": 7, "y": 1.25 }, + { "label": "K18 (B2,B5)", "x": 8, "y": 1.25 }, + { "label": "K19 (B2,B6)", "x": 9, "y": 1.25 }, + { "label": "K1A (B2,C6)", "x": 10, "y": 1.25 }, + { "label": "K1B (B2,C7)", "x": 11, "y": 1.25 }, + { "label": "K1C (B2,F5)", "x": 12, "y": 1.25 }, + { "label": "K1D (B2,F1)", "x": 13, "y": 1.25, "w": 2 }, + { "label": "K1E (B2,F4)", "x": 15, "y": 1.25 }, + { "label": "K20 (B1,D1)", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "K21 (B1,D2)", "x": 1.5, "y": 2.25 }, + { "label": "K22 (B1,D3)", "x": 2.5, "y": 2.25 }, + { "label": "K23 (B1,D5)", "x": 3.5, "y": 2.25 }, + { "label": "K24 (B1,D4)", "x": 4.5, "y": 2.25 }, + { "label": "K25 (B1,D6)", "x": 5.5, "y": 2.25 }, + { "label": "K26 (B1,D7)", "x": 6.5, "y": 2.25 }, + { "label": "K27 (B1,B4)", "x": 7.5, "y": 2.25 }, + { "label": "K28 (B1,B5)", "x": 8.5, "y": 2.25 }, + { "label": "K29 (B1,B6)", "x": 9.5, "y": 2.25 }, + { "label": "K2A (B1,C6)", "x": 10.5, "y": 2.25 }, + { "label": "K2B (B1,C7)", "x": 11.5, "y": 2.25 }, + { "label": "K2C (B1,F5)", "x": 12.5, "y": 2.25 }, + { "label": "K2D (B1,F1)", "x": 13.5, "y": 2.25, "w": 1.5 }, + { "label": "K2E (B1,F4)", "x": 15, "y": 2.25 }, + { "label": "K30 (B0,D1)", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "K31 (B0,D2)", "x": 1.75, "y": 3.25 }, + { "label": "K32 (B0,D3)", "x": 2.75, "y": 3.25 }, + { "label": "K33 (B0,D5)", "x": 3.75, "y": 3.25 }, + { "label": "K34 (B0,D4)", "x": 4.75, "y": 3.25 }, + { "label": "K35 (B0,D6)", "x": 5.75, "y": 3.25 }, + { "label": "K36 (B0,D7)", "x": 6.75, "y": 3.25 }, + { "label": "K37 (B0,B4)", "x": 7.75, "y": 3.25 }, + { "label": "K38 (B0,B5)", "x": 8.75, "y": 3.25 }, + { "label": "K39 (B0,B6)", "x": 9.75, "y": 3.25 }, + { "label": "K3A (B0,C6)", "x": 10.75, "y": 3.25 }, + { "label": "K3B (B0,C7)", "x": 11.75, "y": 3.25 }, + { "label": "K3D (B0,F1)", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "K3E (B0,F4)", "x": 15, "y": 3.25 }, + { "label": "K40 (F6,D1)", "x": 0, "y": 4.25, "w": 2.25 }, + { "label": "K41 (F6,D2)", "x": 2.25, "y": 4.25 }, + { "label": "K42 (F6,D3)", "x": 3.25, "y": 4.25 }, + { "label": "K43 (F6,D5)", "x": 4.25, "y": 4.25 }, + { "label": "K44 (F6,D4)", "x": 5.25, "y": 4.25 }, + { "label": "K45 (F6,D6)", "x": 6.25, "y": 4.25 }, + { "label": "K46 (F6,D7)", "x": 7.25, "y": 4.25 }, + { "label": "K47 (F6,B4)", "x": 8.25, "y": 4.25 }, + { "label": "K48 (F6,B5)", "x": 9.25, "y": 4.25 }, + { "label": "K49 (F6,B6)", "x": 10.25, "y": 4.25 }, + { "label": "K4A (F6,C6)", "x": 11.25, "y": 4.25 }, + { "label": "K4B (F6,C7)", "x": 12.25, "y": 4.25, "w": 1.75 }, + { "label": "K4D (F6,F1)", "x": 14, "y": 4.25 }, + { "label": "K4E (F6,F4)", "x": 15, "y": 4.25 }, + { "label": "K50 (B7,D1)", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "K51 (B7,D2)", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "K52 (B7,D3)", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "label": "K55 (B7,D6)", "x": 3.75, "y": 5.25, "w": 6.25 }, + { "label": "K5A (B7,C6)", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "K5B (B7,C7)", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "K5C (B7,F5)", "x": 13, "y": 5.25 }, + { "label": "K5D (B7,F1)", "x": 14, "y": 5.25 }, + { "label": "K5E (B7,F4)", "x": 15, "y": 5.25 } + ] + } + } + ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" +} diff --git a/keyboards/ada/infinity81/keymaps/default/keymap.c b/keyboards/ada/infinity81/keymaps/default/keymap.c new file mode 100644 index 0000000000..0a6aae93f4 --- /dev/null +++ b/keyboards/ada/infinity81/keymaps/default/keymap.c @@ -0,0 +1,23 @@ +// Copyright 2022 peepeetee (@peepeetee) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT), + [1] = LAYOUT( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/ada/infinity81/keymaps/default/readme.md b/keyboards/ada/infinity81/keymaps/default/readme.md new file mode 100644 index 0000000000..1b6598c1df --- /dev/null +++ b/keyboards/ada/infinity81/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for infinity81 diff --git a/keyboards/ada/infinity81/readme.md b/keyboards/ada/infinity81/readme.md new file mode 100644 index 0000000000..a134379ce5 --- /dev/null +++ b/keyboards/ada/infinity81/readme.md @@ -0,0 +1,27 @@ +# infinity81 + + + +A per key RGB 75% with blocker keyboard + +* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee) +* Hardware Supported: infinity81 +* Hardware Availability: no longer avaliable - future groupbuy possible + +Make example for this keyboard (after setting up your build environment): + + make ada/infinity81:default + +Flashing example for this keyboard: + + make ada/infinity81:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/ada/infinity81/rules.mk b/keyboards/ada/infinity81/rules.mk new file mode 100644 index 0000000000..3ff392a61f --- /dev/null +++ b/keyboards/ada/infinity81/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/creatkeebs/glacier/glacier.h b/keyboards/creatkeebs/glacier/glacier.h index 2dcf15fc98..3b7b1320f5 100644 --- a/keyboards/creatkeebs/glacier/glacier.h +++ b/keyboards/creatkeebs/glacier/glacier.h @@ -21,15 +21,15 @@ #define LAYOUT( \ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K315, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, \ K500, K501, K502, K505, K510, K511, K513, K514, K515, K516 \ ) { \ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 K115, K116 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 K215, K216 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO KC_NO, KC_NO }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO K415, KC_NO }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, K511, KC_NO, K513, K514 K515, K516 } \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, KC_NO, KC_NO }, \ + { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO, K415, KC_NO }, \ + { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, K511, KC_NO, K513, K514, K515, K516 } \ } diff --git a/keyboards/creatkeebs/glacier/keymaps/default/keymap.c b/keyboards/creatkeebs/glacier/keymaps/default/keymap.c index ee381e17cc..e58d790545 100644 --- a/keyboards/creatkeebs/glacier/keymaps/default/keymap.c +++ b/keyboards/creatkeebs/glacier/keymaps/default/keymap.c @@ -17,9 +17,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - - [0] = LAYOUT( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, diff --git a/keyboards/dc01/left/config.h b/keyboards/dc01/left/config.h index bc934e4a39..43883975c4 100644 --- a/keyboards/dc01/left/config.h +++ b/keyboards/dc01/left/config.h @@ -55,7 +55,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 +#define DEBOUNCE 0 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c index 084978a1fd..3eeb2586bc 100644 --- a/keyboards/dc01/left/matrix.c +++ b/keyboards/dc01/left/matrix.c @@ -411,7 +411,7 @@ static void unselect_cols(void) // Complete rows from other modules over i2c i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset) { - i2c_status_t status = i2c_start(address, 50); + i2c_status_t status = i2c_start(address, 5); if (status < 0) { goto error; } diff --git a/keyboards/evancookaudio/sleepingdinosaur/config.h b/keyboards/evancookaudio/sleepingdinosaur/config.h new file mode 100644 index 0000000000..4412e9eb60 --- /dev/null +++ b/keyboards/evancookaudio/sleepingdinosaur/config.h @@ -0,0 +1,44 @@ +/* Copyright 2022 evan cook <evan@evancook.audio> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x636F +#define PRODUCT_ID 0x0002 +#define DEVICE_VER 0x0000 +#define MANUFACTURER evancook.audio +#define PRODUCT sleepingdinosaur + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 6 + +/* key matrix pins */ + +#define MATRIX_ROW_PINS {D0, D1, D4, C6, D7} +#define MATRIX_COL_PINS {F4, F5, F6, F7, B1, B3} + +#define UNUSED_PINS {B2, B6, B7, D5, C7, F1, F0, B4, E6} + diff --git a/keyboards/evancookaudio/sleepingdinosaur/info.json b/keyboards/evancookaudio/sleepingdinosaur/info.json new file mode 100644 index 0000000000..2c21777d49 --- /dev/null +++ b/keyboards/evancookaudio/sleepingdinosaur/info.json @@ -0,0 +1,44 @@ +{ + "keyboard_name": "evancook.audio sleepingdinosaur", + "url": "https://evancook.audio/", + "maintainer": "evanmcook", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"1", "x":0, "y":0}, + {"label":"2", "x":1, "y":0}, + {"label":"3", "x":2, "y":0}, + {"label":"4", "x":3, "y":0}, + {"label":"5", "x":4, "y":0}, + {"label":"-", "x":5, "y":0}, + + {"label":"6", "x":0, "y":1}, + {"label":"7", "x":1, "y":1}, + {"label":"8", "x":2, "y":1}, + {"label":"9", "x":3, "y":1}, + {"label":"0", "x":4, "y":1}, + {"label":"R", "x":5, "y":1}, + + {"label":"/", "x":0, "y":2}, + {"label":"Q", "x":1, "y":2}, + {"label":"W", "x":2, "y":2}, + {"label":"E", "x":3, "y":2}, + {"label":"U", "x":4, "y":2}, + {"label":"V", "x":5, "y":2}, + + {"label":"Enter", "x":0, "y":3, "h":2}, + {"label":"A", "x":1, "y":3}, + {"label":"S", "x":2, "y":3}, + {"label":"D", "x":3, "y":3}, + {"label":"Space", "x":4, "y":3, "h":2}, + {"label":"O", "x":5, "y":3}, + + {"label":"Z", "x":1, "y":4}, + {"label":"X", "x":2, "y":4}, + {"label":"C", "x":3, "y":4}, + {"label":"N", "x":5, "y":4} + + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/evancookaudio/sleepingdinosaur/keymaps/default/keymap.c b/keyboards/evancookaudio/sleepingdinosaur/keymaps/default/keymap.c new file mode 100644 index 0000000000..94cbc390df --- /dev/null +++ b/keyboards/evancookaudio/sleepingdinosaur/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2022 evan cook <evan@evancook.audio> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* LAYER 0 + * ,-----------------------------------------------. + * | 1 | 2 | 3 | 4 | 5 | - | + * |-------+-------+-------|-------|-------|-------| + * | 6 | 7 | 8 | 9 | 0 | R | + * |-------+-------+-------|-------|-------|-------| + * | / | Q | W | E | U | V | + * -------+-------+-------|-------|-------|-------| + * | ENTER | A | S | D | SPACE | O | + * | |-------+-------+-------| |-------| + * | | Z | X | C | | N | + * ,-----------------------------------------------. + */ +[0] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, + KC_6, KC_7, KC_8, KC_9, KC_0, KC_R, + KC_SLSH, KC_Q, KC_W, KC_E, KC_U, KC_V, + KC_ENT, KC_A, KC_S, KC_D, KC_SPC, KC_O, + KC_Z, KC_X, KC_C, KC_N +) +}; diff --git a/keyboards/evancookaudio/sleepingdinosaur/readme.md b/keyboards/evancookaudio/sleepingdinosaur/readme.md new file mode 100644 index 0000000000..064e4981fe --- /dev/null +++ b/keyboards/evancookaudio/sleepingdinosaur/readme.md @@ -0,0 +1,17 @@ +# tenpad macropad + +A 28 button macropad, in a format that is closest to a 5x6 grid, designed by evan cook +[Default Layout](https://raw.githubusercontent.com/evanmcook/sleepingdinosaur/main/images/layouts/sleepingdinosaurdefault.jpg) + +* Keyboard Maintainer: [evan cook](https://github.com/evanmcook/) +* Hardware Supported: sleepingdinosaur Macropad PCB +* Hardware Availability: [tenpad Github](https://github.com/evanmcook/sleepingdinosaur) + +Make example for this keyboard (after setting up your build environment): + + make evancookaudio/sleepingdinosaur:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Enter the bootloader: +* **Physical reset button**: On the underside of the board, near the USB connector and microcontroller, press and hold the small button labeled reset for more than one second to enter the bootloader.
\ No newline at end of file diff --git a/keyboards/evancookaudio/sleepingdinosaur/rules.mk b/keyboards/evancookaudio/sleepingdinosaur/rules.mk new file mode 100644 index 0000000000..6cf6d9358b --- /dev/null +++ b/keyboards/evancookaudio/sleepingdinosaur/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evancookaudio/sleepingdinosaur/sleepingdinosaur.c b/keyboards/evancookaudio/sleepingdinosaur/sleepingdinosaur.c new file mode 100644 index 0000000000..814275e3f0 --- /dev/null +++ b/keyboards/evancookaudio/sleepingdinosaur/sleepingdinosaur.c @@ -0,0 +1,17 @@ +/* Copyright 2022 evan cook <evan@evancook.audio> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * +*/ +#include "sleepingdinosaur.h" diff --git a/keyboards/evancookaudio/sleepingdinosaur/sleepingdinosaur.h b/keyboards/evancookaudio/sleepingdinosaur/sleepingdinosaur.h new file mode 100644 index 0000000000..9672fca289 --- /dev/null +++ b/keyboards/evancookaudio/sleepingdinosaur/sleepingdinosaur.h @@ -0,0 +1,41 @@ +/* Copyright 2022 evan cook <evan@evancook.audio> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT(\ + k00, k01, k02, k03, k04, k05, \ + k06, k07, k08, k09, k10, k11, \ + k12, k13, k14, k15, k16, k17, \ + k18, k19, k20, k21, k22, k23, \ + k24, k25, k26, k27 \ + ) \ + { \ + {k00, k01, k02, k03, k04, k05},\ + {k06, k07, k08, k09, k10, k11},\ + {k12, k13, k14, k15, k16, k17},\ + {k18, k19, k20, k21, k22, k23},\ + {KC_NO, k24, k25, k26, KC_NO, k27},\ + } diff --git a/keyboards/helix/pico/config.h b/keyboards/helix/pico/config.h index b01fd3a001..ea2ce8c941 100644 --- a/keyboards/helix/pico/config.h +++ b/keyboards/helix/pico/config.h @@ -1,6 +1,7 @@ /* Copyright 2012 Jun Wako <wakojun@gmail.com> Copyright 2015 Jack Humbert +Copyright 2018 MakotoKurauchi This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -42,12 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define MASTER_RIGHT // #define EE_HANDS -// Helix keyboard OLED support -// see ./rules.mk: OLED_ENABLE=yes or no -#ifdef OLED_ENABLE - #define SSD1306OLED -#endif - /* key matrix size */ // Rows are doubled-up #define MATRIX_ROWS 8 @@ -114,8 +109,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for Helix keyboard -// 120 RGBoff, OLEDoff -// 120 OLED +// 120 RGBoff // 330 RGB 6 // 300 RGB 32 // 310 OLED & RGB 32 diff --git a/keyboards/helix/pico/keymaps/biacco/keymap.c b/keyboards/helix/pico/keymaps/biacco/keymap.c index a1d041c022..aa196c7e6a 100644 --- a/keyboards/helix/pico/keymaps/biacco/keymap.c +++ b/keyboards/helix/pico/keymaps/biacco/keymap.c @@ -1,24 +1,19 @@ +/* Copyright 2018 Biacco42 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. diff --git a/keyboards/helix/pico/keymaps/biacco/rules.mk b/keyboards/helix/pico/keymaps/biacco/rules.mk index 993ade2673..d971359461 100644 --- a/keyboards/helix/pico/keymaps/biacco/rules.mk +++ b/keyboards/helix/pico/keymaps/biacco/rules.mk @@ -10,10 +10,8 @@ AUDIO_ENABLE = yes # Audio output on port B5 LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) LED_ANIMATIONS = no # LED animations diff --git a/keyboards/helix/pico/keymaps/default/keymap.c b/keyboards/helix/pico/keymaps/default/keymap.c index f23ab85761..11ee30258c 100644 --- a/keyboards/helix/pico/keymaps/default/keymap.c +++ b/keyboards/helix/pico/keymaps/default/keymap.c @@ -1,24 +1,25 @@ +/* Copyright 2018 MakotoKurauchi + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - #ifdef RGBLIGHT_ENABLE //Following line allows macro to read current RGB settings extern rgblight_config_t rgblight_config; #endif -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -334,10 +335,6 @@ void matrix_init_user(void) { #ifdef RGBLIGHT_ENABLE RGB_current_mode = rgblight_config.mode; #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif } @@ -365,105 +362,3 @@ void music_scale_user(void) } #endif - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_LOWER (1<<_LOWER) -#define L_RAISE (1<<_RAISE) -#define L_ADJUST (1<<_ADJUST) -#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - - - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Default")); - break; - case L_RAISE: - matrix_write_P(matrix, PSTR("Raise")); - break; - case L_LOWER: - matrix_write_P(matrix, PSTR("Lower")); - break; - case L_ADJUST: - case L_ADJUST_TRI: - matrix_write_P(matrix, PSTR("Adjust")); - break; - default: - matrix_write(matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/helix/pico/keymaps/default/readme.md b/keyboards/helix/pico/keymaps/default/readme.md index 789097021b..a6c81651a3 100644 --- a/keyboards/helix/pico/keymaps/default/readme.md +++ b/keyboards/helix/pico/keymaps/default/readme.md @@ -96,10 +96,8 @@ see `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` ``` # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/keymaps/default/readme_jp.md b/keyboards/helix/pico/keymaps/default/readme_jp.md index 28594dafcb..73f97ad9a6 100644 --- a/keyboards/helix/pico/keymaps/default/readme_jp.md +++ b/keyboards/helix/pico/keymaps/default/readme_jp.md @@ -58,16 +58,13 @@ ## カスタマイズ -オプションの OLED をつけたり、 RGB バックライトまたは、RGB Underglow をつけた場合は、 `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。 ``` # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations @@ -89,13 +86,6 @@ rules.mk の下記の部分を編集して no を yes に変更してくださ LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) ``` -## OLEDを有効にする - -rules.mk の下記の部分を編集して no を yes に変更してください。 -``` -OLED_ENABLE = yes # OLED_ENABLE -``` - ## iPad/iPhoneサポートを有効にする。 rules.mk の下記の部分を編集して no を yes に変更してください。 diff --git a/keyboards/helix/pico/keymaps/default/rules.mk b/keyboards/helix/pico/keymaps/default/rules.mk index b50519fef5..9a29406c17 100644 --- a/keyboards/helix/pico/keymaps/default/rules.mk +++ b/keyboards/helix/pico/keymaps/default/rules.mk @@ -3,10 +3,8 @@ AUDIO_ENABLE = yes # Audio output LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/keymaps/mtei/keymap.c b/keyboards/helix/pico/keymaps/mtei/keymap.c index 728ef0eb5f..58684be497 100644 --- a/keyboards/helix/pico/keymaps/mtei/keymap.c +++ b/keyboards/helix/pico/keymaps/mtei/keymap.c @@ -1,31 +1,23 @@ +/* Copyright 2018 mtei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif -#ifdef CONSOLE_ENABLE - #include <print.h> -#endif #define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) #define kc5(a,b,c,d,e) KC_##a, KC_##b, KC_##c, KC_##d, KC_##e -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -373,10 +365,6 @@ void matrix_init_user(void) { #ifdef AUDIO_ENABLE startup_user(); #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif } @@ -404,124 +392,3 @@ void music_scale_user(void) } #endif - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); -#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_ANIMATIONS) - char buf[30]; - if(rgblight_config.enable) { - snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", - rgblight_config.mode, - rgblight_config.hue/RGBLIGHT_HUE_STEP, - rgblight_config.sat/RGBLIGHT_SAT_STEP, - rgblight_config.val/RGBLIGHT_VAL_STEP); - matrix_write(matrix, buf); - } -#endif - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - -static const char Qwerty_name[] PROGMEM = " Qwerty"; -static const char Colemak_name[] PROGMEM = " Colemak"; -static const char Dvorak_name[] PROGMEM = " Dvorak"; -static const char Eucalyn_name[] PROGMEM = " Eucalyn"; - -static const char NumL_name[] PROGMEM = ":NumL"; -static const char NumR_name[] PROGMEM = ":NumR"; -static const char Lower_name[] PROGMEM = ":Func"; -static const char Raise_name[] PROGMEM = ":Extra"; -static const char Adjust_name[] PROGMEM = ":Adjust"; - -static const char *layer_names[] = { - [_QWERTY] = Qwerty_name, - [_COLEMAK] = Colemak_name, - [_DVORAK] = Dvorak_name, - [_EUCALYN] = Eucalyn_name, - - [_NUML] = NumL_name, - [_NUMR] = NumR_name, - [_LOWER] = Lower_name, - [_RAISE] = Raise_name, - [_ADJUST] = Adjust_name -}; - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - int name_num; - uint32_t lstate; - matrix_write_P(matrix, layer_names[current_default_layer]); - matrix_write_P(matrix, PSTR("\n")); - for( lstate = layer_state, name_num = 0; - lstate && name_num < sizeof(layer_names)/sizeof(char *); - lstate >>=1, name_num++ ) { - if( (lstate & 1) != 0 ) { - if( layer_names[name_num] ) { - matrix_write_P(matrix, layer_names[name_num]); - } - } - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/helix/pico/keymaps/mtei/rules.mk b/keyboards/helix/pico/keymaps/mtei/rules.mk index 05a60f67d5..413d0519d6 100644 --- a/keyboards/helix/pico/keymaps/mtei/rules.mk +++ b/keyboards/helix/pico/keymaps/mtei/rules.mk @@ -10,10 +10,8 @@ AUDIO_ENABLE = yes # Audio output on port B5 LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/matrix.c b/keyboards/helix/pico/matrix.c deleted file mode 100644 index 039cca6dcf..0000000000 --- a/keyboards/helix/pico/matrix.c +++ /dev/null @@ -1,336 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - split_keyboard_setup(); - - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - writePinHigh(B0); - writePinHigh(D5); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_MATRIX_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - int ret=serial_update_buffers(); - if (ret ) { - if(ret==2) writePinLow(B0); - return 1; - } - writePinHigh(B0); - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - if (is_helix_master()) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[offset+i] = serial_master_buffer[i]; - } - - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - -#ifndef KEYBOARD_helix_rev1 - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C -// for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ -// i2c_slave_buffer[i] = matrix[offset+i]; -// } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_master_buffer[i] = matrix[offset+i]; - } -#endif -#endif - -#ifdef USE_MATRIX_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - writePinLow(D5); - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - writePinHigh(D5); - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/helix/pico/override_helix_options.mk-maintenance b/keyboards/helix/pico/override_helix_options.mk-maintenance new file mode 100644 index 0000000000..0ff930957e --- /dev/null +++ b/keyboards/helix/pico/override_helix_options.mk-maintenance @@ -0,0 +1,42 @@ +# +# This file is not normally used. It is used for maintenance testing purposes. +# To use it, do the following: +# +# $ cp override_helix_options.mk-maintenance override_helix_options.mk +# +$(info -------------------------) +$(info override_helix_options.mk) +$(info -------------------------) + +define HELIX_OVERRIDE_PARSE + ifeq ($(strip $1),back) + LED_BACK_ENABLE = yes + LED_UNDERGLOW_ENABLE = no + endif + ifeq ($(strip $1),under) + LED_BACK_ENABLE = no + LED_UNDERGLOW_ENABLE = yes + endif + ifneq ($(filter noled led-off led_off,$(strip $1)),) + LED_BACK_ENABLE = no + LED_UNDERGLOW_ENABLE = no + endif + ifneq ($(filter noaudio audio-off audio_off,$(strip $1)),) + AUDIO_ENABLE = no + endif + ifneq ($(filter audio audio-on audio_on,$(strip $1)),) + AUDIO_ENABLE = yes + endif + ifneq ($(filter sc split-common split_common,$(strip $1)),) + SPLIT_KEYBOARD = yes + endif + ifneq ($(filter nosc no-sc no-split-common no-split_common,$(strip $1)),) + SPLIT_KEYBOARD = no + endif + ifeq ($(strip $1),scan) + DEBUG_MATRIX_SCAN_RATE_ENABLE = yes + endif + ifeq ($(strip $1),scan-api) + DEBUG_MATRIX_SCAN_RATE_ENABLE = api + endif +endef # end of HELIX_OVERRIDE_PARSE diff --git a/keyboards/helix/pico/pico.c b/keyboards/helix/pico/pico.c index 315b35a7ae..4cd1953632 100644 --- a/keyboards/helix/pico/pico.c +++ b/keyboards/helix/pico/pico.c @@ -1,3 +1,18 @@ +/* Copyright 2018 MakotoKurauchi + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include "helix.h" // Each keymap.c should use is_keyboard_master() instead of 'is_master'. @@ -5,14 +20,6 @@ // for the old keymap.c. uint8_t is_master = false; -#ifdef SSD1306OLED -#include "ssd1306.h" - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - return process_record_gfx(keycode,record) && process_record_user(keycode, record); -} -#endif - void matrix_init_kb(void) { // Each keymap.c should use is_keyboard_master() instead of is_master. // But keep is_master for a while for backwards compatibility @@ -28,9 +35,3 @@ void keyboard_post_init_kb(void) { #endif keyboard_post_init_user(); } - -#if defined(SPLIT_KEYBOARD) && defined(SSD1306OLED) -void matrix_slave_scan_user(void) { - matrix_scan_user(); -} -#endif diff --git a/keyboards/helix/pico/pico.h b/keyboards/helix/pico/pico.h index 5fa5f72958..3e51d54d84 100644 --- a/keyboards/helix/pico/pico.h +++ b/keyboards/helix/pico/pico.h @@ -1,12 +1,22 @@ +/* Copyright 2018 MakotoKurauchi + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #pragma once #include "helix.h" -#ifndef SPLIT_KEYBOARD - extern bool is_helix_master(void); - #define is_keyboard_master() is_helix_master() -#endif - // Each keymap.c should use is_keyboard_master() instead of 'is_master', 'has_usb()'. // But keep 'is_master' for a while for backwards compatibility // for the old keymap.c. diff --git a/keyboards/helix/pico/post_rules.mk b/keyboards/helix/pico/post_rules.mk index 38573d75a5..88bb5482ba 100644 --- a/keyboards/helix/pico/post_rules.mk +++ b/keyboards/helix/pico/post_rules.mk @@ -4,90 +4,30 @@ # Post-processing rules convert keyboard-specific shortcuts (that represent # combinations of standard options) into QMK standard options. # +-include $(strip $(HELIX_TOP_DIR)/pico/override_helix_options.mk) ## File dedicated to maintenance -define HELIX_CUSTOMISE_MSG - $(info Helix Spacific Build Options) - $(info - OLED_ENABLE = $(OLED_ENABLE)) - $(info - LED_BACK_ENABLE = $(LED_BACK_ENABLE)) - $(info - LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE)) - $(info - LED_ANIMATIONS = $(LED_ANIMATIONS)) - $(info - IOS_DEVICE_ENABLE = $(IOS_DEVICE_ENABLE)) - $(info ) -endef +# Parse 'HELIX=xx,yy,zz' option +ifneq ($(strip $(HELIX)),) + # make HELIX=ios helix/pico:AKEYMAP + # make HELIX=no-ani helix/pico:AKEYMAP + # make HELIX=ios,no-ani helix/pico:AKEYMAP + define HELIX_OPTION_PARSE + # parce 'no-ani' 'ios' + $(if $(SHOW_PARCE),$(info parse .$1.)) #debug + $(if $(HELIX_OVERRIDE_PARSE),$(call HELIX_OVERRIDE_PARSE,$1)) -define HELIX_HELP_MSG - $(info Helix keyboard convenient command line option) - $(info - make HELIX=<options> helix/pico:<keymap>) - $(info - option= oled | back | under | na | no-ani) - $(info - ios | sc | split-common | scan | verbose) - $(info - ex.) - $(info - make HELIX=oled helix/pico:<keymap>) - $(info - make HELIX=back helix/pico:<keymap>) - $(info - make HELIX=under helix/pico:<keymap>) - $(info - make HELIX=back,na helix/pico:<keymap>) - $(info - make HELIX=back,ios helix/pico:<keymap>) - $(info ) -endef + ifeq ($(strip $1),ios) + IOS_DEVICE_ENABLE = yes + endif + ifneq ($(filter na no_ani no-ani,$(strip $1)),) + LED_ANIMATIONS = no + endif + endef # end of HELIX_OPTION_PARSE - ifneq ($(strip $(HELIX)),) COMMA=, - helix_option := $(subst $(COMMA), , $(HELIX)) - ifneq ($(filter help,$(helix_option)),) - $(eval $(call HELIX_HELP_MSG)) - $(error ) - endif - ifneq ($(filter oled,$(helix_option)),) - OLED_ENABLE = yes - endif - ifneq ($(filter back,$(helix_option)),) - LED_BACK_ENABLE = yes - else ifneq ($(filter under,$(helix_option)),) - LED_UNDERGLOW_ENABLE = yes - endif - ifneq ($(filter na,$(helix_option)),) - LED_ANIMATIONS = no - endif - ifneq ($(filter no_ani,$(helix_option)),) - LED_ANIMATIONS = no - endif - ifneq ($(filter no-ani,$(helix_option)),) - LED_ANIMATIONS = no - endif - ifneq ($(filter ios,$(helix_option)),) - IOS_DEVICE_ENABLE = yes - endif - ifneq ($(filter sc,$(helix_option)),) - SPLIT_KEYBOARD = yes - endif - ifneq ($(filter split-common,$(helix_option)),) - SPLIT_KEYBOARD = yes - endif - ifneq ($(filter scan,$(helix_option)),) - # use DEBUG_MATRIX_SCAN_RATE - # see docs/newbs_testing_debugging.md - OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE - CONSOLE_ENABLE = yes - SHOW_VERBOSE_INFO = yes - endif - ifneq ($(filter verbose,$(helix_option)),) - SHOW_VERBOSE_INFO = yes - endif + $(eval $(foreach A_OPTION_NAME,$(subst $(COMMA), ,$(HELIX)), \ + $(call HELIX_OPTION_PARSE,$(A_OPTION_NAME)))) SHOW_HELIX_OPTIONS = yes - endif - -ifneq ($(strip $(SPLIT_KEYBOARD)), yes) - SRC += local_drivers/serial.c - KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers - - # A workaround until #7089 is merged. - # serial.c must not be compiled with the -lto option. - # The current LIB_SRC has a side effect with the -fno-lto option, so use it. - LIB_SRC += local_drivers/serial.c - - CUSTOM_MATRIX = yes - - SRC += pico/matrix.c - SRC += pico/split_util.c endif ######## @@ -98,7 +38,6 @@ ifeq ($(strip $(LED_BACK_ENABLE)), yes) RGBLIGHT_ENABLE = yes OPT_DEFS += -DRGBLED_BACK ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) - $(eval $(call HELIX_CUSTOMISE_MSG)) $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') endif else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) @@ -113,35 +52,26 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes) OPT_DEFS += -DLED_ANIMATIONS endif -ifeq ($(strip $(OLED_ENABLE)), yes) - SRC += local_drivers/i2c.c - SRC += local_drivers/ssd1306.c - KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers - OPT_DEFS += -DOLED_ENABLE - ifeq ($(strip $(LOCAL_GLCDFONT)), yes) - OPT_DEFS += -DLOCAL_GLCDFONT - endif -endif - ifeq ($(strip $(AUDIO_ENABLE)),yes) ifeq ($(strip $(RGBLIGHT_ENABLE)),yes) LTO_ENABLE = yes endif - ifeq ($(strip $(OLED_ENABLE)),yes) - LTO_ENABLE = yes - endif endif ifneq ($(strip $(SHOW_HELIX_OPTIONS)),) - $(eval $(call HELIX_CUSTOMISE_MSG)) - ifneq ($(strip $(SHOW_VERBOSE_INFO)),) - $(info -- RGBLIGHT_ENABLE = $(RGBLIGHT_ENABLE)) - $(info -- CONSOLE_ENABLE = $(CONSOLE_ENABLE)) - $(info -- OPT_DEFS = $(OPT_DEFS)) - $(info -- SPLIT_KEYBOARD = $(SPLIT_KEYBOARD)) - $(info -- LTO_ENABLE = $(LTO_ENABLE)) - $(info ) - endif + $(info Helix Spacific Build Options) + $(info - LED_BACK_ENABLE = $(LED_BACK_ENABLE)) + $(info - LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE)) + $(info - LED_ANIMATIONS = $(LED_ANIMATIONS)) + $(info - IOS_DEVICE_ENABLE = $(IOS_DEVICE_ENABLE)) + $(info ) + $(info QMK Build Options) + $(info -- SPLIT_KEYBOARD = $(SPLIT_KEYBOARD)) + $(info -- AUDIO_ENABLE = $(AUDIO_ENABLE)) + $(info -- RGBLIGHT_ENABLE = $(RGBLIGHT_ENABLE)) + $(info -- CONSOLE_ENABLE = $(CONSOLE_ENABLE)) + $(info -- OPT_DEFS = $(OPT_DEFS)) + $(info -- LTO_ENABLE = $(LTO_ENABLE)) + $(info -- DEBUG_MATRIX_SCAN_RATE_ENABLE = $(DEBUG_MATRIX_SCAN_RATE_ENABLE)) + $(info ) endif - -OLED_ENABLE = no # disable OLED in TOP/common_features.mk diff --git a/keyboards/helix/pico/qmk_conf/rules.mk b/keyboards/helix/pico/qmk_conf/rules.mk index e2993b3f80..08ca8e094d 100644 --- a/keyboards/helix/pico/qmk_conf/rules.mk +++ b/keyboards/helix/pico/qmk_conf/rules.mk @@ -1,4 +1,2 @@ EXTRAKEY_ENABLE = yes # Audio control and System control AUDIO_ENABLE = yes # Audio output - -include $(strip $(KEYBOARD_LOCAL_FEATURES_MK)) diff --git a/keyboards/helix/pico/rules.mk b/keyboards/helix/pico/rules.mk index 12caec37ef..efa7ae4be5 100644 --- a/keyboards/helix/pico/rules.mk +++ b/keyboards/helix/pico/rules.mk @@ -1,6 +1,6 @@ +SPLIT_KEYBOARD = yes + # Helix Spacific Build Options default values -OLED_ENABLE = no # OLED_ENABLE -LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/split_util.c b/keyboards/helix/pico/split_util.c deleted file mode 100644 index c77e63f33c..0000000000 --- a/keyboards/helix/pico/split_util.c +++ /dev/null @@ -1,104 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "wait.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -#ifdef EE_HANDS -# include "eeconfig.h" -#endif - -#ifndef SPLIT_USB_TIMEOUT - #define SPLIT_USB_TIMEOUT 2500 -#endif - -volatile bool isLeftHand = true; - -bool waitForUsb(void) { - for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / 100); i++) { - // This will return true of a USB connection has been established - if (UDADDR & _BV(ADDEN)) { - return true; - } - wait_ms(100); - } - - // Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow - (USBCON &= ~(_BV(USBE) | _BV(OTGPADE))); - - return false; -} - -bool is_keyboard_left(void) { -#if defined(SPLIT_HAND_PIN) - // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand - setPinInput(SPLIT_HAND_PIN); - return readPin(SPLIT_HAND_PIN); -#elif defined(EE_HANDS) - return eeconfig_read_handedness(); -#elif defined(MASTER_RIGHT) - return !is_helix_master(); -#endif - - return is_helix_master(); -} - -bool is_helix_master(void) { - static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN; - - // only check once, as this is called often - if (usbstate == UNKNOWN) { -#if defined(SPLIT_USB_DETECT) - usbstate = waitForUsb() ? MASTER : SLAVE; -#elif defined(__AVR__) - USBCON |= (1 << OTGPADE); // enables VBUS pad - wait_us(5); - - usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS -#else - usbstate = MASTER; -#endif - } - - return (usbstate == MASTER); - } - -static void keyboard_master_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_master_init(); -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -void split_keyboard_setup(void) { - isLeftHand = is_keyboard_left(); - - if (is_helix_master()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} diff --git a/keyboards/helix/pico/split_util.h b/keyboards/helix/pico/split_util.h deleted file mode 100644 index 535949118a..0000000000 --- a/keyboards/helix/pico/split_util.h +++ /dev/null @@ -1,20 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool is_helix_master(void); - -void matrix_master_OLED_init (void); - -// stubs as this is handled by legacy code -static inline void split_pre_init(void){} -static inline void split_post_init(void){} diff --git a/keyboards/idobao/id75/v2/config.h b/keyboards/idobao/id75/v2/config.h new file mode 100644 index 0000000000..c2b64649cb --- /dev/null +++ b/keyboards/idobao/id75/v2/config.h @@ -0,0 +1,152 @@ +/* Copyright 2022 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6964 // ID +#define PRODUCT_ID 0x0075 +#define DEVICE_VER 0x0002 +#define MANUFACTURER IDOBAO +#define PRODUCT ID75 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B0, B3, C7, B6, C6 } +#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D5, D3, D2, D1, D0, D4, D6, D7, B4, B5 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#undef RGB_DI_PIN +#define RGB_DI_PIN F0 +#ifdef RGB_MATRIX_ENABLE +# define DRIVER_LED_TOTAL 85 /* 10 Bottom 75 top*/ +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define RGB_MATRIX_KEYPRESSES +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only if RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/idobao/id75/v2/info.json b/keyboards/idobao/id75/v2/info.json new file mode 100644 index 0000000000..fe24920f81 --- /dev/null +++ b/keyboards/idobao/id75/v2/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "idobao/id75/v2", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT_ortho_5x15": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}] + } + } +} diff --git a/keyboards/idobao/id75/v2/readme.md b/keyboards/idobao/id75/v2/readme.md new file mode 100644 index 0000000000..76a94ae38c --- /dev/null +++ b/keyboards/idobao/id75/v2/readme.md @@ -0,0 +1,27 @@ +# ID75 v2 + + + +A 5x15 ortholinear keyboard with hotswap sockets and north facing in switch RGB LEDs and RGB underglow + +* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee) +* Hardware Supported: ID75 v2 +* Hardware Availability: https://idobao.net/products/idobao-id75-crystal-hot-swap-keyboard-kit?_pos=1&_sid=8758d3561&_ss=r + +Make example for this keyboard (after setting up your build environment): + + make idobao/id75/v2:default + +Flashing example for this keyboard: + + make idobao/id75/v2:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/idobao/id75/v2/rules.mk b/keyboards/idobao/id75/v2/rules.mk new file mode 100644 index 0000000000..303a814c3a --- /dev/null +++ b/keyboards/idobao/id75/v2/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes # Use link time optimization + +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 + +LAYOUTS = ortho_5x15 diff --git a/keyboards/idobao/id75/v2/v2.c b/keyboards/idobao/id75/v2/v2.c new file mode 100644 index 0000000000..f65a9e3362 --- /dev/null +++ b/keyboards/idobao/id75/v2/v2.c @@ -0,0 +1,49 @@ +/* Copyright 2022 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "v2.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index +{ 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 71, 70 }, +{ 69, 68, 67, 66, 65, 64, 63, 62, 61, 60, 59, 58, 57, 56, 55 }, +{ 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, 40 }, +{ 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25 }, +{ 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10 } +}, { + // LED Index to Physical Position +{8, 12},{60, 12},{112, 12},{164, 12},{216, 12}, +{216, 60},{164, 60},{112, 60},{60, 60},{8, 60}, + + +{224, 64}, {208, 64}, {192, 64}, {176, 64}, {160, 64}, {144, 64}, {128, 64}, {112, 64}, {96, 64}, {80, 64}, {64, 64}, {48, 64}, {32, 64}, {16, 64}, {0, 64}, +{224, 48}, {208, 48}, {192, 48}, {176, 48}, {160, 48}, {144, 48}, {128, 48}, {112, 48}, {96, 48}, {80, 48}, {64, 48}, {48, 48}, {32, 48}, {16, 48}, {0, 48}, +{224, 32}, {208, 32}, {192, 32}, {176, 32}, {160, 32}, {144, 32}, {128, 32}, {112, 32}, {96, 32}, {80, 32}, {64, 32}, {48, 32}, {32, 32}, {16, 32}, {0, 32}, +{224, 16}, {208, 16}, {192, 16}, {176, 16}, {160, 16}, {144, 16}, {128, 16}, {112, 16}, {96, 16}, {80, 16}, {64, 16}, {48, 16}, {32, 16}, {16, 16}, {0, 16}, +{224, 0}, {208, 0}, {192, 0}, {176, 0}, {160, 0}, {144, 0}, {128, 0}, {112, 0}, {96, 0}, {80, 0}, {64, 0}, {48, 0}, {32, 0}, {16, 0}, {0, 0}, + +}, { + // LED Index to Flag +2,2,2,2,2,2,2,2,2,2, +4,4,4,4,4,4,4,4,4,4,4,4,4,4,4, +4,4,4,4,4,4,4,4,4,4,4,4,4,4,4, +4,4,4,4,4,4,4,4,4,4,4,4,4,4,4, +4,4,4,4,4,4,4,4,4,4,4,4,4,4,4, +4,4,4,4,4,4,4,4,4,4,4,4,4,4,4, + +} }; + +#endif diff --git a/keyboards/idobao/id75/v2/v2.h b/keyboards/idobao/id75/v2/v2.h new file mode 100644 index 0000000000..9643a1efd3 --- /dev/null +++ b/keyboards/idobao/id75/v2/v2.h @@ -0,0 +1,41 @@ +/* Copyright 2018 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_ortho_5x15( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E } \ +} diff --git a/keyboards/keebio/bdn9/keymaps/default/keymap.c b/keyboards/keebio/bdn9/keymaps/default/keymap.c index e33e94b536..1dc680a1f6 100644 --- a/keyboards/keebio/bdn9/keymaps/default/keymap.c +++ b/keyboards/keebio/bdn9/keymaps/default/keymap.c @@ -67,5 +67,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_PGUP); } } - return true; + return false; } diff --git a/keyboards/keebio/bdn9/keymaps/via/keymap.c b/keyboards/keebio/bdn9/keymaps/via/keymap.c index 7c380a4fdd..655f3e5ed4 100644 --- a/keyboards/keebio/bdn9/keymaps/via/keymap.c +++ b/keyboards/keebio/bdn9/keymaps/via/keymap.c @@ -40,28 +40,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == _LEFT) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } - else if (index == _MIDDLE) { - if (clockwise) { - tap_code(KC_DOWN); - } else { - tap_code(KC_UP); - } - } - else if (index == _RIGHT) { - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } - } - return true; -} diff --git a/keyboards/keebio/bdn9/rev1/rev1.c b/keyboards/keebio/bdn9/rev1/rev1.c index 4b32b73a0b..b1b0afc608 100644 --- a/keyboards/keebio/bdn9/rev1/rev1.c +++ b/keyboards/keebio/bdn9/rev1/rev1.c @@ -16,3 +16,29 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + else if (index == 1) { + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } + else if (index == 2) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return false; +} diff --git a/keyboards/keebio/bdn9/rev2/rev2.c b/keyboards/keebio/bdn9/rev2/rev2.c index 689abd0b1d..9c2f5169f3 100644 --- a/keyboards/keebio/bdn9/rev2/rev2.c +++ b/keyboards/keebio/bdn9/rev2/rev2.c @@ -37,3 +37,29 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + else if (index == 1) { + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } + else if (index == 2) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return false; +} diff --git a/keyboards/keebio/dsp40/keymaps/default/keymap.c b/keyboards/keebio/dsp40/keymaps/default/keymap.c index f9bf6c27c5..a4f65f5f48 100755 --- a/keyboards/keebio/dsp40/keymaps/default/keymap.c +++ b/keyboards/keebio/dsp40/keymaps/default/keymap.c @@ -113,5 +113,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_VOLD); } } - return true; + return false; } diff --git a/keyboards/keebio/dsp40/keymaps/via/keymap.c b/keyboards/keebio/dsp40/keymaps/via/keymap.c index 6575bbc8c6..f2f87663c5 100755 --- a/keyboards/keebio/dsp40/keymaps/via/keymap.c +++ b/keyboards/keebio/dsp40/keymaps/via/keymap.c @@ -63,14 +63,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } - return true; -} diff --git a/keyboards/keebio/dsp40/rev1/rev1.c b/keyboards/keebio/dsp40/rev1/rev1.c index 04c85b08d1..41187b90b6 100644 --- a/keyboards/keebio/dsp40/rev1/rev1.c +++ b/keyboards/keebio/dsp40/rev1/rev1.c @@ -24,3 +24,15 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; +} diff --git a/keyboards/keebio/foldkb/keymaps/default/keymap.c b/keyboards/keebio/foldkb/keymaps/default/keymap.c index 0a71ef4d2d..45bc1673e2 100644 --- a/keyboards/keebio/foldkb/keymaps/default/keymap.c +++ b/keyboards/keebio/foldkb/keymaps/default/keymap.c @@ -32,20 +32,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_VOLD, _______, _______, _______, _______, _______, _______, _______, KC_0, _______, _______, _______, _______ ), }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } else if (index == 1) { - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } - } - return true; -} diff --git a/keyboards/keebio/foldkb/keymaps/via/keymap.c b/keyboards/keebio/foldkb/keymaps/via/keymap.c index d3e3a95bf6..85d6912760 100644 --- a/keyboards/keebio/foldkb/keymaps/via/keymap.c +++ b/keyboards/keebio/foldkb/keymaps/via/keymap.c @@ -46,20 +46,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } else if (index == 1) { - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } - } - return true; -} diff --git a/keyboards/keebio/foldkb/rev1/rev1.c b/keyboards/keebio/foldkb/rev1/rev1.c index bab2674003..a0dfb31b52 100644 --- a/keyboards/keebio/foldkb/rev1/rev1.c +++ b/keyboards/keebio/foldkb/rev1/rev1.c @@ -24,3 +24,21 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return false; +} diff --git a/keyboards/keebio/iris/keymaps/default/keymap.c b/keyboards/keebio/iris/keymaps/default/keymap.c index e3cd532694..169e5b50c7 100644 --- a/keyboards/keebio/iris/keymaps/default/keymap.c +++ b/keyboards/keebio/iris/keymaps/default/keymap.c @@ -127,5 +127,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_PGUP); } } - return true; + return false; } diff --git a/keyboards/keebio/iris/keymaps/via/keymap.c b/keyboards/keebio/iris/keymaps/via/keymap.c index f6183f1f7d..0a71bad92b 100644 --- a/keyboards/keebio/iris/keymaps/via/keymap.c +++ b/keyboards/keebio/iris/keymaps/via/keymap.c @@ -65,21 +65,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // └────────┴────────┴────────┘ └────────┴────────┴────────┘ ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } - else if (index == 1) { - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } - } - return true; -} diff --git a/keyboards/keebio/iris/rev3/rev3.c b/keyboards/keebio/iris/rev3/rev3.c index b97b097b78..e874b9beae 100644 --- a/keyboards/keebio/iris/rev3/rev3.c +++ b/keyboards/keebio/iris/rev3/rev3.c @@ -35,3 +35,21 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return false; +} diff --git a/keyboards/keebio/iris/rev4/rev4.c b/keyboards/keebio/iris/rev4/rev4.c index de2ba26db3..36ef461cd0 100644 --- a/keyboards/keebio/iris/rev4/rev4.c +++ b/keyboards/keebio/iris/rev4/rev4.c @@ -16,3 +16,21 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return false; +} diff --git a/keyboards/keebio/iris/rev5/rev5.c b/keyboards/keebio/iris/rev5/rev5.c index a4191719c0..2a89c6923b 100644 --- a/keyboards/keebio/iris/rev5/rev5.c +++ b/keyboards/keebio/iris/rev5/rev5.c @@ -12,3 +12,21 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "rev5.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return false; +} diff --git a/keyboards/keebio/iris/rev6/config.h b/keyboards/keebio/iris/rev6/config.h index 386416f113..e26dc5fa50 100644 --- a/keyboards/keebio/iris/rev6/config.h +++ b/keyboards/keebio/iris/rev6/config.h @@ -36,10 +36,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS_RIGHT { D4, D6, D7, C7, F1, F4 } #define SPLIT_HAND_PIN D5 -#define ENCODERS_PAD_A { B2 } -#define ENCODERS_PAD_B { B3 } -#define ENCODERS_PAD_A_RIGHT { B2 } -#define ENCODERS_PAD_B_RIGHT { B3 } +#define ENCODERS_PAD_A { B3 } +#define ENCODERS_PAD_B { B2 } +#define ENCODERS_PAD_A_RIGHT { B3 } +#define ENCODERS_PAD_B_RIGHT { B2 } /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/keebio/iris/rev6/rev6.c b/keyboards/keebio/iris/rev6/rev6.c index ff9f9d25a1..152df0b2f9 100644 --- a/keyboards/keebio/iris/rev6/rev6.c +++ b/keyboards/keebio/iris/rev6/rev6.c @@ -63,3 +63,21 @@ led_config_t g_led_config = { { } }; #endif + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return false; +} diff --git a/keyboards/keebio/kbo5000/keymaps/default/keymap.c b/keyboards/keebio/kbo5000/keymaps/default/keymap.c index 0261d11915..d2881206d6 100644 --- a/keyboards/keebio/kbo5000/keymaps/default/keymap.c +++ b/keyboards/keebio/kbo5000/keymaps/default/keymap.c @@ -55,5 +55,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_UP); } } - return true; + return false; } diff --git a/keyboards/keebio/kbo5000/keymaps/via/keymap.c b/keyboards/keebio/kbo5000/keymaps/via/keymap.c index 11075faf6f..a7fd62dddb 100644 --- a/keyboards/keebio/kbo5000/keymaps/via/keymap.c +++ b/keyboards/keebio/kbo5000/keymaps/via/keymap.c @@ -34,26 +34,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == LEFT_HALF_ENC) { - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } - } else if (index == RIGHT_HALF_ENC1) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } else if (index == RIGHT_HALF_ENC2) { - if (clockwise) { - tap_code(KC_DOWN); - } else { - tap_code(KC_UP); - } - } - return true; -} diff --git a/keyboards/keebio/kbo5000/rev1/rev1.c b/keyboards/keebio/kbo5000/rev1/rev1.c index fafad9b6ab..757a8be2a1 100644 --- a/keyboards/keebio/kbo5000/rev1/rev1.c +++ b/keyboards/keebio/kbo5000/rev1/rev1.c @@ -30,3 +30,27 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 2) { + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } + return false; +} diff --git a/keyboards/keebio/quefrency/keymaps/default65/keymap.c b/keyboards/keebio/quefrency/keymaps/default65/keymap.c index 0ae9d50e20..481de2aa00 100644 --- a/keyboards/keebio/quefrency/keymaps/default65/keymap.c +++ b/keyboards/keebio/quefrency/keymaps/default65/keymap.c @@ -46,5 +46,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_VOLD); } } - return true; + return false; } diff --git a/keyboards/keebio/quefrency/keymaps/default65macro/keymap.c b/keyboards/keebio/quefrency/keymaps/default65macro/keymap.c index 86f6911779..f452232b2d 100644 --- a/keyboards/keebio/quefrency/keymaps/default65macro/keymap.c +++ b/keyboards/keebio/quefrency/keymaps/default65macro/keymap.c @@ -46,5 +46,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_VOLD); } } - return true; + return false; } diff --git a/keyboards/keebio/quefrency/keymaps/via/keymap.c b/keyboards/keebio/quefrency/keymaps/via/keymap.c index 213f7af325..5ac83ef57c 100644 --- a/keyboards/keebio/quefrency/keymaps/via/keymap.c +++ b/keyboards/keebio/quefrency/keymaps/via/keymap.c @@ -33,20 +33,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } - } else if (index == 1) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } - return true; -} diff --git a/keyboards/keebio/quefrency/rev2/rev2.c b/keyboards/keebio/quefrency/rev2/rev2.c index 69edfd415f..590c9850c2 100644 --- a/keyboards/keebio/quefrency/rev2/rev2.c +++ b/keyboards/keebio/quefrency/rev2/rev2.c @@ -30,3 +30,21 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; +} diff --git a/keyboards/keebio/quefrency/rev3/rev3.c b/keyboards/keebio/quefrency/rev3/rev3.c index 40771e2c68..0f8f964d92 100644 --- a/keyboards/keebio/quefrency/rev3/rev3.c +++ b/keyboards/keebio/quefrency/rev3/rev3.c @@ -46,3 +46,21 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; +} diff --git a/keyboards/keebio/quefrency/rev4/rev4.c b/keyboards/keebio/quefrency/rev4/rev4.c index a66d19166d..190135420f 100644 --- a/keyboards/keebio/quefrency/rev4/rev4.c +++ b/keyboards/keebio/quefrency/rev4/rev4.c @@ -15,3 +15,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "quefrency.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; +} diff --git a/keyboards/keebio/sinc/keymaps/default/keymap.c b/keyboards/keebio/sinc/keymaps/default/keymap.c index 650314295b..060bf5dc6c 100644 --- a/keyboards/keebio/sinc/keymaps/default/keymap.c +++ b/keyboards/keebio/sinc/keymaps/default/keymap.c @@ -33,5 +33,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_VOLD); } } - return true; + return false; } diff --git a/keyboards/keebio/sinc/keymaps/via/keymap.c b/keyboards/keebio/sinc/keymaps/via/keymap.c index 20cfdd79bb..225e9c07df 100644 --- a/keyboards/keebio/sinc/keymaps/via/keymap.c +++ b/keyboards/keebio/sinc/keymaps/via/keymap.c @@ -37,20 +37,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } - } else if (index == 1) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } - return true; -} diff --git a/keyboards/keebio/sinc/rev1/rev1.c b/keyboards/keebio/sinc/rev1/rev1.c index 562a245344..906b9b7d58 100644 --- a/keyboards/keebio/sinc/rev1/rev1.c +++ b/keyboards/keebio/sinc/rev1/rev1.c @@ -22,3 +22,21 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; +} diff --git a/keyboards/keebio/sinc/rev2/rev2.c b/keyboards/keebio/sinc/rev2/rev2.c index aea877d83c..47bb1e9e68 100644 --- a/keyboards/keebio/sinc/rev2/rev2.c +++ b/keyboards/keebio/sinc/rev2/rev2.c @@ -38,3 +38,21 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; +} diff --git a/keyboards/keebio/stick/keymaps/default/keymap.c b/keyboards/keebio/stick/keymaps/default/keymap.c index ea4ca3f54f..8e9b43a14a 100644 --- a/keyboards/keebio/stick/keymaps/default/keymap.c +++ b/keyboards/keebio/stick/keymaps/default/keymap.c @@ -39,5 +39,5 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_UP); } } - return true; + return false; } diff --git a/keyboards/keebio/stick/keymaps/via/keymap.c b/keyboards/keebio/stick/keymaps/via/keymap.c index 3f196dda69..752b2de054 100644 --- a/keyboards/keebio/stick/keymaps/via/keymap.c +++ b/keyboards/keebio/stick/keymaps/via/keymap.c @@ -35,21 +35,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; - -bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } - else if (index == 1) { - if (clockwise) { - tap_code(KC_DOWN); - } else { - tap_code(KC_UP); - } - } - return true; -} diff --git a/keyboards/keebio/stick/stick.c b/keyboards/keebio/stick/stick.c index 050c4eff81..c2d25f8860 100644 --- a/keyboards/keebio/stick/stick.c +++ b/keyboards/keebio/stick/stick.c @@ -48,3 +48,21 @@ void eeconfig_init_kb(void) { eeconfig_update_kb(0); eeconfig_init_user(); } + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } + return false; +} diff --git a/keyboards/kikoslab/ellora65/keymaps/default/keymap.c b/keyboards/kikoslab/ellora65/keymaps/default/keymap.c index bf18fe87de..e904026b8e 100644 --- a/keyboards/kikoslab/ellora65/keymaps/default/keymap.c +++ b/keyboards/kikoslab/ellora65/keymaps/default/keymap.c @@ -23,19 +23,21 @@ enum _layer { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_MA] = LAYOUT_all( + [_MA] = LAYOUT_all( KC_MUTE, KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, KC_F13 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSLS, KC_F14 , KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , KC_ENT , KC_INS, KC_F15 , KC_LSFT, KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP , KC_DEL, - KC_F16 , KC_LCTL, KC_LGUI, KC_LALT, MO(_FN) , KC_SPC , MO(_FN) , MO(_FN), MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT), + KC_F16 , KC_LCTL, KC_LGUI, KC_LALT, MO(_FN) , KC_SPC , MO(_FN) , MO(_FN), MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT + ), - [_FN] = LAYOUT_all( + [_FN] = LAYOUT_all( KC_DEL , KC_GRV , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_BSPC, KC_TRNS, KC_F17 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F18 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F19 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_F20 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + KC_F20 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; bool encoder_update_user(uint8_t index, bool clockwise) { @@ -197,7 +199,7 @@ static void print_status_narrow(void) { } -void oled_task_user(void) { +bool oled_task_user(void) { /* KEYBOARD PET VARIABLES START */ current_wpm = get_current_wpm(); @@ -206,7 +208,7 @@ void oled_task_user(void) { /* KEYBOARD PET VARIABLES END */ print_status_narrow(); - + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { @@ -237,4 +239,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } -#endif
\ No newline at end of file +#endif diff --git a/keyboards/kikoslab/ellora65/keymaps/via/keymap.c b/keyboards/kikoslab/ellora65/keymaps/via/keymap.c index 707abaf6ba..fbe101d3d1 100644 --- a/keyboards/kikoslab/ellora65/keymaps/via/keymap.c +++ b/keyboards/kikoslab/ellora65/keymaps/via/keymap.c @@ -17,34 +17,37 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_all( + [0] = LAYOUT_all( KC_MUTE, KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, KC_F13 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSLS, KC_F14 , KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , KC_ENT , KC_INS, KC_F15 , KC_LSFT, KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP , KC_DEL, - KC_F16 , KC_LCTL, KC_LGUI, KC_LALT, MO(1) , KC_SPC , MO(1) , MO(1) , MO(1) , KC_LEFT, KC_DOWN, KC_RGHT), + KC_F16 , KC_LCTL, KC_LGUI, KC_LALT, MO(1) , KC_SPC , MO(1) , MO(1) , MO(1) , KC_LEFT, KC_DOWN, KC_RGHT + ), - [1] = LAYOUT_all( + [1] = LAYOUT_all( KC_DEL , KC_GRV , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_BSPC, KC_TRNS, KC_F17 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F18 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F19 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_F20 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + KC_F20 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), - [2] = LAYOUT_all( + [2] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_TRNS, KC_F17 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F18 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F19 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_F20 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + KC_F20 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), - [3] = LAYOUT_all( + [3] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_TRNS, KC_F17 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F18 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F19 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_F20 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + KC_F20 , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; bool encoder_update_user(uint8_t index, bool clockwise) { @@ -206,7 +209,7 @@ static void print_status_narrow(void) { } -void oled_task_user(void) { +bool oled_task_user(void) { /* KEYBOARD PET VARIABLES START */ current_wpm = get_current_wpm(); @@ -215,7 +218,7 @@ void oled_task_user(void) { /* KEYBOARD PET VARIABLES END */ print_status_narrow(); - + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { @@ -246,4 +249,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } -#endif
\ No newline at end of file +#endif diff --git a/keyboards/redox_w/keymaps/dvorak/keymap.c b/keyboards/redox_w/keymaps/dvorak/keymap.c new file mode 100644 index 0000000000..f2c2d85f04 --- /dev/null +++ b/keyboards/redox_w/keymaps/dvorak/keymap.c @@ -0,0 +1,128 @@ +/* Copyright 2021 66f94eae(66f94eae@gmail.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layers { + _DVORAK, + _SYMB, + _QWERTY, + _ADJUST, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_DVORAK] = LAYOUT( +//┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_GESC ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 , KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_BSPC , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_TAB ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,KC_LBRC, KC_RBRC ,KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_SLSH , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LCTL ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I ,KC_MINS, KC_EQL ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_BSLS , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LSFT ,KC_SCLN ,KC_Q ,KC_J ,KC_K ,KC_X ,KC_PGUP ,KC_HOME , KC_END ,KC_PGDN ,KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,KC_RSFT , +//├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤ ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤ + KC_CAPS ,KC_APP ,KC_LALT ,KC_LGUI , LT(3,KC_MUTE), KC_SPC ,KC_INS , KC_DEL ,KC_ENT , KC_RALT , KC_LEFT ,KC_DOWN ,KC_UP ,KC_RGHT +//└────────┴────────┴────────┴────────┘ └────────┘ └────────┴────────┘ └────────┴────────┘ └────────┘ └────────┴────────┴────────┴────────┘ +), + +[_SYMB] = LAYOUT( +//┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_GESC ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 , KC_F8 ,KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_BSPC , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_TAB , KC_BTN1 ,KC_MS_U ,KC_BTN2 ,KC_WH_U ,KC_COPY ,KC_F6 , KC_F7 ,KC_COPY ,KC_P7 ,KC_P8 ,KC_P9 ,KC_MPRV ,KC_PPLS , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LCTL ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_WH_D ,KC_CUT ,KC_VOLD , KC_VOLU ,KC_CUT ,KC_P4 ,KC_P5 ,KC_P6 ,KC_MNXT ,KC_PMNS , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LSFT ,KC_WH_L ,KC_UP ,KC_WH_R ,KC_LGUI ,KC_PSTE ,KC_WH_U ,KC_SLCK , KC_NLCK ,KC_WH_D ,KC_PSTE ,KC_P1 ,KC_P2 ,KC_P3 ,KC_PEQL ,KC_PAST , +//├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤ ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤ + KC_CAPS ,KC_LEFT ,KC_DOWN ,KC_RGHT, LT(3,KC_MUTE) ,KC_SPC ,KC_ESC , KC_DEL ,KC_ENT , KC_APP , KC_P0 ,KC_PDOT ,KC_PENT ,KC_PSLS +//└────────┴────────┴────────┴────────┘ └────────┘ └────────┴────────┘ └────────┴────────┘ └────────┘ └────────┴────────┴────────┴────────┘ +), + +[_QWERTY] = LAYOUT( +//┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_GESC ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 , KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_BSPC, +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_TAB ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_MINS , KC_EQL ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LCTL ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,KC_LBRC , KC_RBRC ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,KC_QUOT , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,KC_HOME ,KC_PGUP , KC_PGDN ,KC_END ,KC_N ,KC_M ,KC_COMM ,KC_DOT ,KC_SLSH ,KC_RSFT , +//├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤ ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤ + KC_CAPS ,KC_LGUI ,KC_LALT , KC_APP ,LT(3,KC_MUTE) , KC_SPC ,KC_INS , KC_DEL ,KC_ENT , KC_APP , KC_LEFT ,KC_UP ,KC_DOWN ,KC_RGHT +//└────────┴────────┴────────┴────────┘ └────────┘ └────────┴────────┘ └────────┴────────┘ └────────┘ └────────┴────────┴────────┴────────┘ +), + +[_ADJUST] = LAYOUT( +//┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_GESC ,TO(0) ,TO(1) ,TO(2) ,KC_NO ,KC_NO , KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO , KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO , KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO , +//├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LSFT ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_RSFT , +//├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤ ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤ + KC_NO ,KC_NO ,KC_NO ,KC_LGUI ,LT(3,KC_MUTE), KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_APP ,KC_NO ,KC_NO ,KC_NO ,KC_NO +//└────────┴────────┴────────┴────────┘ └────────┘ └────────┴────────┘ └────────┴────────┘ └────────┘ └────────┴────────┴────────┴────────┘ +) + +}; + +layer_state_t layer_state_set_user(layer_state_t state) +{ + switch (get_highest_layer(state)) { + case _DVORAK: + blu_led_off; + grn_led_off; + break; + case _SYMB: + blu_led_on; + grn_led_off; + break; + case _QWERTY: + blu_led_off; + grn_led_on; + break; + case _ADJUST: + blu_led_on; + grn_led_on; + break; + default: + break; + } + return state; +} + +bool led_update_user(led_t led_state) +{ + if (led_state.caps_lock) { + red_led_on; + } else { + red_led_off; + } + if (led_state.num_lock) { + wht_led_on; + } else { + wht_led_off; + } + return false; +} diff --git a/keyboards/redox_w/keymaps/dvorak/readme.md b/keyboards/redox_w/keymaps/dvorak/readme.md new file mode 100644 index 0000000000..cdc90976a7 --- /dev/null +++ b/keyboards/redox_w/keymaps/dvorak/readme.md @@ -0,0 +1,38 @@ +### fork from default layout，and support dvorak layout[defalut layer] + +##### only use 3 layers + +``` +Keymap: 3 Layers +----------------- +stack of layers + ____________ precedence + / / | high + 31 /___________// | + : _:_:_:_:_:__ | + 3 /___________// | --- adjust + 2 /___________// | --- qwerty + 1 /___________// | --- symb + 0 /___________/ | --- dvorak[default] +``` + +defalut LED indicators + +RED --------- CAPS LOCK + +BLUE ------- SYMB layer + +GREEN----- QWERTY layer + +WHITE------ NUM LOCK *in my test case,this is inefficient on mac os* + +> BLUE and GREEN as a bit flag +> +> 0 0 + +| BLUE(0) | GREEN(0) | STATUS | DESCRIBE | +|:-------:|:--------:|:------:|:--------------------------------------------------- | +| 0 | 0 | 0 | layer 0[dvorak] is active,and blue,green led is off | +| 1 | 0 | 1 | layer1[symb] is active, and blue led is on | +| 0 | 1 | 2 | layer 2[qwerty] is active,and green led is on | +| 1 | 1 | 3 | layer 3[adjust] is active,and blue,green led is on | diff --git a/keyboards/redox_w/redox_w.c b/keyboards/redox_w/redox_w.c index 5b86344536..48ea7d3bed 100644 --- a/keyboards/redox_w/redox_w.c +++ b/keyboards/redox_w/redox_w.c @@ -1,10 +1,15 @@ #include "redox_w.h" void led_init(void) { - DDRD |= (1<<1); - PORTD |= (1<<1); - DDRF |= (1<<4) | (1<<5); - PORTF |= (1<<4) | (1<<5); + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(F4); + setPinOutput(F5); + + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(F4); + writePinHigh(F5); } diff --git a/keyboards/redox_w/redox_w.h b/keyboards/redox_w/redox_w.h index 727c3050dc..1ed42c8458 100644 --- a/keyboards/redox_w/redox_w.h +++ b/keyboards/redox_w/redox_w.h @@ -2,21 +2,20 @@ #include "quantum.h" -#define red_led_off PORTF |= (1<<5) -#define red_led_on PORTF &= ~(1<<5) -#define blu_led_off PORTF |= (1<<4) -#define blu_led_on PORTF &= ~(1<<4) -#define grn_led_off PORTD |= (1<<1) -#define grn_led_on PORTD &= ~(1<<1) +#define red_led_off writePinHigh(F5) +#define red_led_on writePinLow(F5) +#define blu_led_off writePinHigh(F4) +#define blu_led_on writePinLow(F4) +#define grn_led_off writePinHigh(D1) +#define grn_led_on writePinLow(D1) +#define wht_led_off writePinHigh(D0) +#define wht_led_on writePinLow(D0) -#define set_led_off red_led_off; grn_led_off; blu_led_off -#define set_led_red red_led_on; grn_led_off; blu_led_off -#define set_led_blue red_led_off; grn_led_off; blu_led_on -#define set_led_green red_led_off; grn_led_on; blu_led_off -#define set_led_yellow red_led_on; grn_led_on; blu_led_off -#define set_led_magenta red_led_on; grn_led_off; blu_led_on -#define set_led_cyan red_led_off; grn_led_on; blu_led_on -#define set_led_white red_led_on; grn_led_on; blu_led_on +#define set_led_off red_led_off; grn_led_off; blu_led_off; wht_led_off +#define set_led_red red_led_on; grn_led_off; blu_led_off; wht_led_off +#define set_led_blue red_led_off; grn_led_off; blu_led_on; wht_led_off +#define set_led_green red_led_off; grn_led_on; blu_led_off; wht_led_off +#define set_led_white red_led_off; grn_led_off; blu_led_off; wht_led_on // This a shortcut to help you visually see your layout. // The first section contains all of the arguements diff --git a/keyboards/takashicompany/heavy_left/config.h b/keyboards/takashicompany/heavy_left/config.h index e7f37f251c..b5a16def68 100644 --- a/keyboards/takashicompany/heavy_left/config.h +++ b/keyboards/takashicompany/heavy_left/config.h @@ -143,3 +143,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Bootmagic Lite key configuration */ //#define BOOTMAGIC_LITE_ROW 0 //#define BOOTMAGIC_LITE_COLUMN 0 + +#define EE_HANDS
\ No newline at end of file diff --git a/keyboards/takashicompany/heavy_left/keymaps/takashicompany/keymap.c b/keyboards/takashicompany/heavy_left/keymaps/takashicompany/keymap.c new file mode 100644 index 0000000000..11beb28ca0 --- /dev/null +++ b/keyboards/takashicompany/heavy_left/keymaps/takashicompany/keymap.c @@ -0,0 +1,69 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + KC_00 = USER00, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, KC_DEL, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_HOME, + KC_P4, KC_P5, KC_P6, KC_PCMM,KC_LCTL, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_END, + KC_P1, KC_P2, KC_P3, KC_PEQL, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS, KC_UP, KC_RSFT, KC_PGUP, + KC_P0, KC_00, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, LALT_T(KC_LANG2), LALT_T(KC_LANG2), LSFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1), KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, MO(3) + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_EQL, KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CAPS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_00: + if (record->event.pressed) { + SEND_STRING("00"); + } + return false; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/takashicompany/heavy_left/keymaps/takashicompany/rules.mk b/keyboards/takashicompany/heavy_left/keymaps/takashicompany/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/takashicompany/heavy_left/keymaps/takashicompany/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/takashicompany/heavy_left/rules.mk b/keyboards/takashicompany/heavy_left/rules.mk index a92a794ed6..ce3c5bfaeb 100644 --- a/keyboards/takashicompany/heavy_left/rules.mk +++ b/keyboards/takashicompany/heavy_left/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD=yes
\ No newline at end of file diff --git a/keyboards/wolf/sabre/config.h b/keyboards/wolf/sabre/config.h new file mode 100644 index 0000000000..02b897ba4f --- /dev/null +++ b/keyboards/wolf/sabre/config.h @@ -0,0 +1,61 @@ +/* +Copyright 2020 <contact@vwolf.be> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5453 // TS - ToastyStoemp +#define PRODUCT_ID 0x0055 // Sabre +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER ToastyStoemp +#define PRODUCT Sabre + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { D0, D1, F1, F0, B5, B6, C7, C6, F6, F7, F4, F5 } +#define MATRIX_COL_PINS { D2, D3, D5, D4, D6, D7, B4, B2, B1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define BACKLIGHT_PIN B7 + +#define LED_CAPS_LOCK_PIN B3 +#define LED_SCROLL_LOCK_PIN B0 + +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/wolf/sabre/info.json b/keyboards/wolf/sabre/info.json new file mode 100644 index 0000000000..3fb912fdb4 --- /dev/null +++ b/keyboards/wolf/sabre/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "Sabre", + "url": "", + "maintainer": "ToastyStoemp", + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":8.25, "y":0}, {"label":"PrtSc", "x":17.25, "y":0}, {"label":"Scroll Lock", "x":18.25, "y":0}, {"label":"Pause", "x":19.25, "y":0}, {"label":"\u00ac", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"\"", "x":2, "y":1.25}, {"label":"\u00a3", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"Insert", "x":17.25, "y":1.25}, {"label":"Home", "x":18.25, "y":1.25}, {"label":"PgUp", "x":19.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Delete", "x":17.25, "y":2.25}, {"label":"End", "x":18.25, "y":2.25}, {"label":"PgDn", "x":19.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"\u2191", "x":18.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":2.5, "y":5.25, "w":1.5}, {"label":"Alt", "x":4, "y":5.25}, {"x":5, "y":5.25, "w":2.25}, {"label":"\u2190", "x":17.25, "y":5.25}, {"label":"\u2193", "x":18.25, "y":5.25}, {"label":"\u2192", "x":19.25, "y":5.25}, {"label":"F6", "x":-7.75, "y":6.25}, {"label":"F7", "x":-6.75, "y":6.25}, {"label":"F8", "x":-5.75, "y":6.25}, {"label":"F9", "x":-4.5, "y":6.25}, {"label":"F10", "x":-3.5, "y":6.25}, {"label":"F11", "x":-2.5, "y":6.25}, {"label":"F12", "x":-1.5, "y":6.25}, {"label":"&", "x":-8.5, "y":7.5}, {"label":"*", "x":-7.5, "y":7.5}, {"label":"(", "x":-6.5, "y":7.5}, {"label":")", "x":-5.5, "y":7.5}, {"label":"_", "x":-4.5, "y":7.5}, {"label":"+", "x":-3.5, "y":7.5}, {"label":"BackSpace", "x":-2.5, "y":7.5, "w":2}, {"label":"Y", "x":-9.0, "y":8.5}, {"label":"U", "x":-8, "y":8.5}, {"label":"I", "x":-7.0, "y":8.5}, {"label":"O", "x":-6, "y":8.5}, {"label":"P", "x":-5.0, "y":8.5}, {"label":"{", "x":-4, "y":8.5}, {"label":"}", "x":-3.0, "y":8.5}, {"label":"|", "x":-2, "y":8.5, "w":1.5}, {"label":"H", "x":-8.75, "y":9.5}, {"label":"J", "x":-7.75, "y":9.5}, {"label":"K", "x":-6.75, "y":9.5}, {"label":"L", "x":-5.75, "y":9.5}, {"label":":", "x":-4.75, "y":9.5}, {"label":"@", "x":-3.75, "y":9.5}, {"label":"Enter", "x":-2.75, "y":9.5, "w":2.25}, {"label":"B", "x":-9.25, "y":10.5}, {"label":"N", "x":-8.25, "y":10.5}, {"label":"M", "x":-7.25, "y":10.5}, {"label":"<", "x":-6.25, "y":10.5}, {"label":">", "x":-5.25, "y":10.5}, {"label":"?", "x":-4.25, "y":10.5}, {"label":"Shift", "x":-3.25, "y":10.5, "w":1.75}, {"x":-1.5, "y":10.5}, {"x":-9.25, "y":11.5, "w":2.75}, {"label":"<", "x":-6.5, "y":11.5}, {"label":"Alt", "x":-5.5, "y":11.5, "w":1.5}, {"label":"Ctrl", "x":-3.0, "y":11.5, "w":1.5}] + } + } +}
\ No newline at end of file diff --git a/keyboards/wolf/sabre/keymaps/default/keymap.c b/keyboards/wolf/sabre/keymaps/default/keymap.c new file mode 100644 index 0000000000..a873ab89fb --- /dev/null +++ b/keyboards/wolf/sabre/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* +Copyright 2020 <contact@vwolf.be> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_LAYER1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_INC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC, BL_BRTG + ) +}; diff --git a/keyboards/wolf/sabre/keymaps/via/keymap.c b/keyboards/wolf/sabre/keymaps/via/keymap.c new file mode 100644 index 0000000000..6a6c35bb0e --- /dev/null +++ b/keyboards/wolf/sabre/keymaps/via/keymap.c @@ -0,0 +1,61 @@ +/* +Copyright 2020 <contact@vwolf.be> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_LAYER1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_INC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC, BL_BRTG + ), + + [_LAYER2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/wolf/sabre/keymaps/via/rules.mk b/keyboards/wolf/sabre/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/wolf/sabre/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/wolf/sabre/readme.md b/keyboards/wolf/sabre/readme.md new file mode 100644 index 0000000000..b06217d0ee --- /dev/null +++ b/keyboards/wolf/sabre/readme.md @@ -0,0 +1,21 @@ +# Sabre + +The following is the QMK Firmware for the Sabre PCB. + +The PCB features: +* QMK & VIA compatibility + +--- + +* Keyboard Maintainer: [ToastyStoemp](https://github.com/ToastyStoemp) + +Make example for this keyboard (after setting up your build environment): + + make wolf/sabre:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader Enter the bootloader in 3 ways: +* **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` diff --git a/keyboards/wolf/sabre/rules.mk b/keyboards/wolf/sabre/rules.mk new file mode 100644 index 0000000000..39ad4aa5a0 --- /dev/null +++ b/keyboards/wolf/sabre/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +BACKLIGHT_ENABLE = yes +BACKLIGHT_DRIVER = pwm
\ No newline at end of file diff --git a/keyboards/wolf/sabre/sabre.c b/keyboards/wolf/sabre/sabre.c new file mode 100644 index 0000000000..84577ef867 --- /dev/null +++ b/keyboards/wolf/sabre/sabre.c @@ -0,0 +1,14 @@ +/* +Copyright 2020 <contact@vwolf.be> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "sabre.h" diff --git a/keyboards/wolf/sabre/sabre.h b/keyboards/wolf/sabre/sabre.h new file mode 100644 index 0000000000..4580f46e93 --- /dev/null +++ b/keyboards/wolf/sabre/sabre.h @@ -0,0 +1,40 @@ +/* +Copyright 2020 <contact@vwolf.be> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +/* sabre Keymap Definitions */ +#define LAYOUT( \ + K00, K01, K11, K02, K12, K13, K04, K14, K05, K15, K06, K16, K07, K17, K08, K18, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K37, K28, K38, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K57, K48, K58, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76, \ + K80, K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K96, K88, \ + KA0, KB0, KA1, KA2, KB3, KB4, KA5, KA6, KB7, KA8, KB8 \ +) { \ + { K00, K01, K02, KC_NO, K04, K05, K06, K07, K08 }, \ + { KC_NO, K11, K12, K13, K14, K15, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, K43, K44, K45, K46, KC_NO, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, KC_NO, KC_NO }, \ + { K70, K71, K72, K73, K74, K75, K76, KC_NO, KC_NO }, \ + { K80, K81, K82, K83, K84, K85, K86, KC_NO, K88 }, \ + { K90, K91, K92, K93, K94, K95, K96, KC_NO, KC_NO }, \ + { KA0, KA1, KA2, KC_NO, KC_NO, KA5, KA6, KC_NO, KA8 }, \ + { KB0, KC_NO, KC_NO, KB3, KB4, KC_NO, KC_NO, KB7, KB8 } \ +} |