1 files changed, 100 insertions, 0 deletions
diff --git a/keyboards/yugo_m/model_m_101/config.h b/keyboards/yugo_m/model_m_101/config.h
new file mode 100644
index 0000000000..76580a60e4
--- /dev/null
+++ b/keyboards/yugo_m/model_m_101/config.h
@@ -0,0 +1,100 @@
+/*
+Copyright 2020 Nidzo Tomic <tomicn8@hotmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x8E81  // Yugo-M
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    IBM
+#define PRODUCT         Yugo-M (Model M replacement controller)
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B8, B7, B6, B5, B4, B3, A15, A14 }
+#define MATRIX_COL_PINS { A9, A8, B15, B14, B13, B12, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3 }
+#define UNUSED_PINS { A0, A1, A2, A10, A13, B9, C13, C14, C15 }
+
+
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+/* define if matrix has ghost */
+#define MATRIX_HAS_GHOST
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION