diff options
Diffstat (limited to 'keyboards/ymd75/README.md')
-rw-r--r-- | keyboards/ymd75/README.md | 83 |
1 files changed, 0 insertions, 83 deletions
diff --git a/keyboards/ymd75/README.md b/keyboards/ymd75/README.md deleted file mode 100644 index d1c4e95ae7..0000000000 --- a/keyboards/ymd75/README.md +++ /dev/null @@ -1,83 +0,0 @@ -YMD75 / MT84 -========================== - -This is a port of the QMK firmware for boards that are based on the -ps2avrGB firmware, like the [ps2avrGB keyboard] (https://www.keyclack.com/product/gb-ps2avrgb/), for use on the YMD75, from YMDK. YMDK sell the board and name it "YMD75", however the PCB has "MT84" printed on both sides. - -Most of the code was taken and amended from YMD96 and my port JJ50, which in itself was taken from ps2avrGB and amended by Andrew Novak. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -Hardware Supported: YMD75/MT84 with the ATmega32a chip. -Hardware Availability: The YMD75/MT84 PCB is available from YMDK on AliExpress and suchlike. - -This version by Wayne K Jones (github.com/WarmCatUK) - -## Installing and Building - -Make example for this keyboard (after setting up your build environment): - -``` -$ make ymd75:default:program -``` -It should detect the keyboard and set it to bootloader mode automatically, prior to flashing firmware. -I've found that I need to remove the previous build/file before making a new one as it doesn't overwrite it; but this might just be my personal experience. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. -In addition you may need the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `./util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `Left Control` to keep it -in the bootloader: - -``` -$ make ymd75 -$ bootloadHID -r ymd75_default.hex -``` -I dont use windows personally, but the following is from ymd96 regarding flashing the atmega32a: - -Since the YMD75/MT84 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. If anyone knows of a Linux/Mac bootflasher that works, edit this readme! -On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux or OSX you can simply use the terminal. - -Once you have those two pieces of software: -Build the keyboard with -``` -$ make ymd75:default -``` -If you make your own layout, change the `default` word to whatever your layout is. - -And flash the compiled hex file with `HIDBootFlash`. Simply put the board in flashing mode by plugging it in while holding the key below the top right key, and click `find device`. Then you can specify the .hex file and flash it to the device. - - -## Troubleshooting - -1. Try plugging the board in while pressing `Backspace` (`Key below the top right key`). This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub. -3. If you get an error such as "Resource Unavailable" when attemting to flash on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` for more info. -4. I was occasionally finding that I wasn't flashing changes that I was making to my keymap. If that happens, remove the previous build and simply force rebuild by making with: -``` -$ rm ymd75_default.hex -$ make -B ymd75:default -$ make -B ymd75:default:program -``` - - - |