diff options
Diffstat (limited to 'keyboards/wilba_tech/wt_rgb_backlight.c')
| -rw-r--r-- | keyboards/wilba_tech/wt_rgb_backlight.c | 109 |
1 files changed, 100 insertions, 9 deletions
diff --git a/keyboards/wilba_tech/wt_rgb_backlight.c b/keyboards/wilba_tech/wt_rgb_backlight.c index 221d924c4c..e2506bf3f9 100644 --- a/keyboards/wilba_tech/wt_rgb_backlight.c +++ b/keyboards/wilba_tech/wt_rgb_backlight.c @@ -21,6 +21,7 @@ defined(RGB_BACKLIGHT_KOYU) || \ defined(RGB_BACKLIGHT_HS60) || \ defined(RGB_BACKLIGHT_NK65) || \ + defined(RGB_BACKLIGHT_NEBULA12) || \ defined(RGB_BACKLIGHT_NEBULA65) || \ defined(RGB_BACKLIGHT_U80_A) || \ defined(RGB_BACKLIGHT_DAWN60) || \ @@ -44,7 +45,7 @@ #include "wt_rgb_backlight_api.h" #include "wt_rgb_backlight_keycodes.h" -#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) +#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12) #include <avr/interrupt.h> #include "drivers/avr/i2c_master.h" #else @@ -84,6 +85,8 @@ LED_TYPE g_ws2812_leds[WS2812_LED_TOTAL]; #define BACKLIGHT_LED_COUNT 108 #elif defined(RGB_BACKLIGHT_DAWN60) #define BACKLIGHT_LED_COUNT 84 //64 + 20 +#elif defined(RGB_BACKLIGHT_NEBULA12) +#define BACKLIGHT_LED_COUNT 16 #else #define BACKLIGHT_LED_COUNT 72 #endif @@ -358,6 +361,36 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {1, K_16, J_16, L_16}, //LB64 }; +#elif defined(RGB_BACKLIGHT_NEBULA12) +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +#define ISSI_ADDR_1 0x74 + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_1, C3_2, C4_2}, //A1 + {0, C1_2, C2_2, C4_3}, //A2 + {0, C1_3, C2_3, C3_3}, //A3 + {0, C1_4, C2_4, C3_4}, //A4 + {0, C1_5, C2_5, C3_5}, //A5 + {0, C1_6, C2_6, C3_6}, //A6 + {0, C1_7, C2_7, C3_7}, //A7 + {0, C1_8, C2_8, C3_8}, //A8 + {0, C9_1, C8_1, C7_1}, //A9 + {0, C9_2, C8_2, C7_2}, //A10 + {0, C9_3, C8_3, C7_3}, //A11 + {0, C9_4, C8_4, C7_4}, //A12 + {0, C9_5, C8_5, C7_5}, //A13 + {0, C9_6, C8_6, C7_6}, //A14 + {0, C9_7, C8_7, C6_6}, //A15 + {0, C9_8, C7_7, C6_7}, //A16 +}; + #elif defined(RGB_BACKLIGHT_U80_A) // U80-A prototype uses 3 ISSI drivers @@ -928,6 +961,21 @@ const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { //LA62..LB5 {221,255}, {225,255}, {229,255}, {22,255}, {12,255}, {244,255}, {234,255}, {255,255} }; + +#elif defined(RGB_BACKLIGHT_NEBULA12) +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + // A1..A16 + {0,0}, {16,0}, {32,0}, {0,16}, {16,16}, {32,16}, {0,32}, {16,32}, + {255,255}, {255,255}, {255,255}, {255,255}, + {32,48}, {16,48}, {0,48}, {32,32} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + // A1..A16 + {72,197}, {64,194}, {56,197}, {85,74}, {64,64}, {43,74}, {171,74}, {192,64}, + {255,255}, {255,255}, {255,255}, {255,255}, + {200,196}, {192,192}, {184,196}, {213,74} +}; + #elif defined(RGB_BACKLIGHT_NEBULA65) const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { // LA1..LA60 @@ -951,6 +999,7 @@ const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { //LA62..LB5 {207,255}, {213,255}, {218,255}, {35,255}, {21,255}, {19,255}, {224,255}, {32,255} }; + #elif defined(RGB_BACKLIGHT_M6_B) // M6-B is really simple: // 0 3 5 @@ -1018,7 +1067,7 @@ void map_led_to_point( uint8_t index, Point *point ) point->x = pgm_read_byte(addr); point->y = pgm_read_byte(addr+1); -#if defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_NEBULA65) +#if defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_NEBULA65) || defined(RGB_BACKLIGHT_NEBULA12) return; #endif @@ -1219,6 +1268,18 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1, 3+64-1 }, { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 48-1, 62-1, 63-1, 64-1, 56-1, 4+64-1 } }; +#elif defined(RGB_BACKLIGHT_NEBULA12) +// +// A1, A2, A3, +// A4, A5, A6, +// A7, A8, A16, +// A15, A14, A13, +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 1-1, 2-1, 3-1 }, + { 4-1, 5-1, 6-1 }, + { 7-1, 8-1, 16-1 }, + { 15-1, 14-1, 13-1 } +}; #elif defined(RGB_BACKLIGHT_M6_B) // M6-B is really simple: // 0 3 5 @@ -1263,6 +1324,9 @@ void backlight_update_pwm_buffers(void) IS31FL3733_update_pwm_buffers( ISSI_ADDR_2, 1 ); IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 ); IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); +#elif defined(RGB_BACKLIGHT_NEBULA12) + IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, 0 ); + IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_U80_A) static uint8_t driver = 0; switch ( driver ) @@ -1340,7 +1404,7 @@ void backlight_set_key_hit(uint8_t row, uint8_t column) g_any_key_hit = 0; } -#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) +#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12) // This is (F_CPU/1024) / 20 Hz // = 15625 Hz / 20 Hz // = 781 @@ -1376,6 +1440,28 @@ void backlight_timer_disable(void) { TIMSK3 &= ~_BV(OCIE3A); } +#elif defined(RGB_BACKLIGHT_NEBULA12) //STM32, use GPT with TIM3. Enable in halconf.h +static void gpt_backlight_timer_task(GPTDriver *gptp); +// Timer setup at 200Khz, callback at 10k ticks = 20Hz +static GPTConfig gpt3cfg1 = { + .frequency = 200000U, + .callback = gpt_backlight_timer_task +}; + +void backlight_timer_init(void) +{ + gptStart(&GPTD3, &gpt3cfg1); +} + +void backlight_timer_enable(void) +{ + gptStartContinuous(&GPTD3, 10000); +} + +void backlight_timer_disable(void) +{ + gptStopTimer(&GPTD3); +} #else //STM32, use GPT with TIM4. Enable in halconf.h static void gpt_backlight_timer_task(GPTDriver *gptp); // Timer setup at 200Khz, callback at 10k ticks = 20Hz @@ -1398,7 +1484,7 @@ void backlight_timer_disable(void) { gptStopTimer(&GPTD4); } -#endif //!defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) +#endif //!defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA12) void backlight_set_suspend_state(bool state) { @@ -1635,7 +1721,7 @@ void backlight_effect_cycle_all(void) for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ ) { uint16_t offset2 = g_key_hit[i]<<2; -#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) +#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12) // stabilizer LEDs use spacebar hits if ( i == 36+6 || i == 54+13 || // LC6, LD13 ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 @@ -1660,7 +1746,7 @@ void backlight_effect_cycle_left_right(void) for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ ) { uint16_t offset2 = g_key_hit[i]<<2; -#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) +#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12) // stabilizer LEDs use spacebar hits if ( i == 36+6 || i == 54+13 || // LC6, LD13 ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 @@ -1687,7 +1773,7 @@ void backlight_effect_cycle_up_down(void) for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ ) { uint16_t offset2 = g_key_hit[i]<<2; -#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) +#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_DAWN60) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12) // stabilizer LEDs use spacebar hits if ( i == 36+6 || i == 54+13 || // LC6, LD13 ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 @@ -1861,7 +1947,7 @@ void backlight_effect_indicators(void) } } -#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) +#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65) && !defined(RGB_BACKLIGHT_NEBULA65) && !defined(RGB_BACKLIGHT_NEBULA12) ISR(TIMER3_COMPA_vect) #else //STM32 interrupt static void gpt_backlight_timer_task(GPTDriver *gptp) @@ -2374,8 +2460,9 @@ void backlight_init_drivers(void) IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #else IS31FL3731_init( ISSI_ADDR_1 ); +#if !defined(RGB_BACKLIGHT_NEBULA12) IS31FL3731_init( ISSI_ADDR_2 ); - +#endif #if defined(RGB_BACKLIGHT_U80_A) IS31FL3731_init( ISSI_ADDR_3 ); #endif @@ -2461,13 +2548,17 @@ void backlight_init_drivers(void) bool enabled = !( ( index == 15+7 && !g_config.use_split_backspace ) || //other backspace ( index == 47+13 && g_config.use_7u_spacebar ) || //LD13 ( index == 47+15 && g_config.use_7u_spacebar ) ); //LD15 +#elif defined(RGB_BACKLIGHT_NEBULA12) + bool enabled = !( ( index >= 9-1 && index <= 12-1 ) ); // A9-A12 #endif // This only caches it for later IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); } // This actually updates the LED drivers IS31FL3731_update_led_control_registers( ISSI_ADDR_1, 0 ); +#if !defined(RGB_BACKLIGHT_NEBULA12) IS31FL3731_update_led_control_registers( ISSI_ADDR_2, 1 ); +#endif #if defined(RGB_BACKLIGHT_U80_A) IS31FL3731_update_led_control_registers( ISSI_ADDR_3, 2 ); #endif |