diff options
Diffstat (limited to 'keyboards/westfoxtrot/aanzee/config.h')
-rw-r--r-- | keyboards/westfoxtrot/aanzee/config.h | 142 |
1 files changed, 0 insertions, 142 deletions
diff --git a/keyboards/westfoxtrot/aanzee/config.h b/keyboards/westfoxtrot/aanzee/config.h deleted file mode 100644 index 3959066b22..0000000000 --- a/keyboards/westfoxtrot/aanzee/config.h +++ /dev/null @@ -1,142 +0,0 @@ -/* -Copyright 2019 westfoxtrot - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x21FF -#define PRODUCT_ID 0xAA01 -#define DEVICE_VER 0x0001 -#define MANUFACTURER westfoxtrot -#define PRODUCT aanzee -#define DESCRIPTION QMK Firmware for the Aanzee PCB - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -// ROWS: Top to bottom, COLS: Left to right - -#define MATRIX_ROW_PINS {B4,D7,D6,D4,B3} -#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0} -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 5 - -#define RGB_DI_PIN E6 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 9 - #define RGBLIGHT_HUE_STEP 12 - #define RGBLIGHT_SAT_STEP 25 - #define RGBLIGHT_VAL_STEP 12 - #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ - #define RGBLIGHT_ANIMATIONS -/*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -#endif -#define RGBW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - - -//dynamic keymap and via support - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 - -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 -// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 675 // **** CHANGE THIS BASED ON MATRIX_ROWS & MATRIX_COLS **** -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 349 // **** CHANGE THIS BASED ON 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR **** -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 |