diff options
Diffstat (limited to 'keyboards/treadstone48/rev1/config.h')
| -rw-r--r-- | keyboards/treadstone48/rev1/config.h | 276 |
1 files changed, 203 insertions, 73 deletions
diff --git a/keyboards/treadstone48/rev1/config.h b/keyboards/treadstone48/rev1/config.h index 09fb621545..56ffbaef01 100644 --- a/keyboards/treadstone48/rev1/config.h +++ b/keyboards/treadstone48/rev1/config.h @@ -1,6 +1,5 @@ /* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert +Copyright 2020 marksard This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -16,8 +15,9 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H +#pragma once + +#include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED @@ -27,84 +27,159 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT treadstone48 #define DESCRIPTION Symmetrical staggered 47+1 Keys Keyboard -#define PREVENT_STUCK_MODIFIERS -#define TAPPING_FORCE_HOLD -#define TAPPING_TERM 150 - -/* Use I2C or Serial */ -#define USE_I2C -#define USE_SERIAL -//#define USE_MATRIX_I2C - -/* Select hand configuration */ -#define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -// OLED support -// see ./rules.mk: OLED_ENABLE=yes or no -#ifdef OLED_ENABLE - #define SSD1306OLED -#endif - /* key matrix size */ -// Rows are doubled-up #define MATRIX_ROWS 16 -#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } - -// wiring of each half #define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } +#define UNUSED_PINS -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW -/* number of backlight levels */ +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 -/* Set 0 if debouncing isn't needed */ +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN + #ifndef RS_EXTRA_LED + #define RGBLED_NUM 12 + #define RGBLED_SPLIT {12, 0} + #else + #define RGBLED_NUM 32 + #define RGBLED_SPLIT {12, 20} + #endif + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 180 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ + /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ + #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 + /*==== use exp() and sin() ====*/ + #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 + #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE +#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE +#define LOCKING_RESYNC_ENABLE -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -// treadstone48 keyboard RGB LED support -//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no -// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes -#define RGBLED_NUM 12 - -#ifndef IOS_DEVICE_ENABLE - #define RGBLIGHT_LIMIT_VAL 180 - #define RGBLIGHT_VAL_STEP 17 -#else - #define RGBLIGHT_LIMIT_VAL 50 - #define RGBLIGHT_VAL_STEP 4 -#endif -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - -#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) -// USB_MAX_POWER_CONSUMPTION value for treadstone48 keyboard -// 120 RGBoff, OLEDoff -// 120 OLED -// 330 RGB 6 -// 300 RGB 32 -// 310 OLED & RGB 32 - #define USB_MAX_POWER_CONSUMPTION 400 -#else - // fix iPhone and iPad power adapter issue - // iOS device need lessthan 100 - #define USB_MAX_POWER_CONSUMPTION 100 -#endif +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z /* * Feature disable options @@ -112,17 +187,72 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* disable debug print */ -// #define NO_DEBUG +//#define NO_DEBUG /* disable print */ -// #define NO_PRINT +//#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION +/* disable these deprecated features by default */ +#ifndef LINK_TIME_OPTIMIZATION_ENABLE + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION +#endif +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line #endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 |