diff options
Diffstat (limited to 'keyboards/sol')
34 files changed, 0 insertions, 3588 deletions
diff --git a/keyboards/sol/common/glcdfont.c b/keyboards/sol/common/glcdfont.c deleted file mode 100644 index 89665ba074..0000000000 --- a/keyboards/sol/common/glcdfont.c +++ /dev/null @@ -1,244 +0,0 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#ifndef FONT5X7_H -#define FONT5X7_H - -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/pgmspace.h> -#elif defined(ESP8266) - #include <pgmspace.h> -#else - #define PROGMEM -#endif - -// Standard ASCII 5x7 font - -static const unsigned char font[] PROGMEM = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, - 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, - 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, - 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, - 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, - 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, - 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, - 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, - 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, - 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, - 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, - 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, - 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, - 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, - 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, - 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, - 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, - 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, - 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, - 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, - 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, - 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, - 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, - 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, - 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, - 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, - 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, - 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, - 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, - 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, - 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, - 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, - 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, - 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, - 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, - 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, - 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, - 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, - 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, - 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, - 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, - 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, - 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, - 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, - 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, - 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, - 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, - 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, - 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, - 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, - 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, - 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, - 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, - 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, - 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, - 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, - 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, - 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, - 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, - 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, - 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, - 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, - 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, - 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, - 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, - 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, - 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, - 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, - 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, - 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, - 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, - 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, - 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, - 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, - 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, - 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, - 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, - 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, - 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, - 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, - 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, - 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, - 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, - 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, - 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, - 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, - 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, - 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, - 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, - 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, - 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, - 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, - 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, - 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, - 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, - 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, - 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, - 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, - 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, - 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, - 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, - 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, - 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, - 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, - 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, - 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, - 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, - 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, - 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, - 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, - 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, - 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, - 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, - 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, - 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, - 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, - 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, - 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, - 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, - 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, - 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, - 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, - 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, - 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, - 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, - 0x03, 0x07, 0x1F, 0x7F, 0xFF, 0xFF, - 0xFE, 0xF8, 0xF0, 0xC0, 0x20, 0xF8, - 0xFE, 0xFF, 0xFE, 0x79, 0x27, 0x1F, - 0x7F, 0xFF, 0xFF, 0xFE, 0xF8, 0xF0, - 0xC0, 0x20, 0xF8, 0xFE, 0xFF, 0xFF, - 0x7F, 0x3F, 0x3F, 0x7F, 0xFF, 0xFE, - 0xF8, 0xF0, 0xC0, 0x00, 0x00, 0x00, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xFF, 0x7F, 0x7F, 0x7F, - 0xBF, 0xBF, 0xC0, 0xC0, 0xC0, 0xE0, - 0xE0, 0xE0, 0xE0, 0xF0, 0xF0, 0xF0, - 0xF8, 0x78, 0x78, 0x7C, 0x3C, 0x3C, - 0xFE, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, - 0xBF, 0xBF, 0xDF, 0xDF, 0xEF, 0xEF, - 0x00, 0x03, 0x07, 0x1F, 0x7F, 0xFF, - 0xFF, 0xFF, 0xFE, 0xF8, 0xE0, 0xC0, - 0xE0, 0xF8, 0xFE, 0xFF, 0xFF, 0xFF, - 0x7F, 0x1F, 0x07, 0x03, 0x00, 0x00, - 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, - 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, - 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, - 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, - 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, - 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, - 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, - 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xC1, 0xF3, - 0xCF, 0xBF, 0x7F, 0xFF, 0xFF, 0xFC, - 0xFB, 0xE7, 0x81, 0x00, 0x00, 0x00, - 0x00, 0x80, 0xE3, 0xCF, 0x3F, 0xFF, - 0xFF, 0xFF, 0xFC, 0xFB, 0xE7, 0x81, - 0x00, 0x00, 0x00, 0x00, 0x81, 0xE7, - 0xFF, 0xFF, 0xFF, 0xFF, 0x3C, 0x00, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xF8, 0xF8, 0xFC, 0x7C, 0x7E, - 0x7E, 0x3E, 0xFE, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xF7, 0xF7, 0xF7, 0xFB, - 0xFB, 0x7D, 0x7D, 0x7D, 0xBE, 0xBE, - 0xBE, 0xDF, 0xDF, 0xE0, 0xE0, 0x00, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0xFC, 0xFC, 0x7C, 0x7E, 0x7E, - 0x3E, 0x3E, 0x1F, 0x1F, 0x1F, 0x0F, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, - 0xE7, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xE7, 0x81, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, - 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, - 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, - 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, - 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, - 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, - 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x60, 0x70, 0x7C, 0x7F, 0x7F, 0x7F, - 0x7F, 0x1F, 0x06, 0x01, 0x03, 0x0F, - 0x3F, 0x7F, 0x7F, 0x7E, 0x7C, 0x7C, - 0x7E, 0x7F, 0x7F, 0x7F, 0x1F, 0x06, - 0x01, 0x07, 0x0F, 0x3F, 0x7F, 0x7F, - 0x7E, 0x7C, 0x7C, 0x7E, 0x7F, 0x7F, - 0x3F, 0x0F, 0x03, 0x00, 0x00, 0x00, - 0x00, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x7D, 0x7D, 0x3D, 0x3E, - 0x1E, 0x1F, 0x1F, 0x1F, 0x0F, 0x0F, - 0x07, 0x07, 0x07, 0x03, 0x03, 0x00, - 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, - 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x00, - 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x00, 0x40, 0x70, 0x78, 0x7E, 0x7F, - 0x7F, 0x7F, 0x3F, 0x0F, 0x03, 0x01, - 0x03, 0x0F, 0x3F, 0x7F, 0x7F, 0x7F, - 0x7E, 0x78, 0x70, 0x40, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; -#endif // FONT5X7_H diff --git a/keyboards/sol/common/knob_v2.c b/keyboards/sol/common/knob_v2.c deleted file mode 100644 index f22f7c5d86..0000000000 --- a/keyboards/sol/common/knob_v2.c +++ /dev/null @@ -1,71 +0,0 @@ -#include "knob_v2.h" - -bool knob_prev_a = false; -static knob_report_t knob_report = {.dir = 0, .phase = 0}; - -void knob_init(void) { - // I use pins D1 (ISR1) & D4 for a knob. - - // Set pin mode for D4 as input. - DDRD &= ~(0UL << ENCODER_PIN_2); - - // Enable internal pull-up for D4. - // This is done by "writing" 1 to a pin that has its mode set to input. - PORTD |= (1 << ENCODER_PIN_2); - - // Enable interrupt for D1 - // For more info on the below flags see this awesome section 11.1 (pages 89-90) here: - // https://cdn-shop.adafruit.com/datasheets/atmel-7766-8-bit-avr-atmega16u4-32u4_datasheet.pdf - // Set pin mode & pull-up. - DDRD &= ~(0UL << ENCODER_PIN_1); - PORTD |= (1UL << ENCODER_PIN_1); - - // INT: 33221100 - EICRA |= 0b00010000; // 0b01 - any edge - // INT: 6 3210 - EIMSK |= 0b00000100; -} - -ISR(ENCODER_INT) { - bool a = PIND & (1 << ENCODER_PIN_1); - - if (knob_prev_a != a) { - // "A" channel has REALLY changed. - knob_report.phase = a; - knob_prev_a = a; - bool b = PIND & (1 << ENCODER_PIN_2); - if (a == b) { - // Halfway through CCW rotation (A == B) - // - // +---YOU ARE HERE (A=1, B=1) - // | +---OR HERE (A=0, B=0) - // | | - // v v - // A: _____/^^^^^\__ - // B: __/^^^^^\_____ - knob_report.dir++; - } else { - // Halfway through CW rotation (A != B) - // - // +---YOU ARE HERE (A=1, B=0) - // | +---OR HERE (A=0, B=1) - // | | - // v v - // A: _____/^^^^^\_____ - // B: ________/^^^^^\__ - knob_report.dir--; - } - } -} - -knob_report_t knob_report_read(void) { - // Return knob report. - return knob_report; -} - -void knob_report_reset(void) { - // Call this ASAP once you've processed the previous knob report. - // TODO: This should probably be called within `knob_report_read`. - knob_report.dir = 0; - knob_report.phase = 0; -} diff --git a/keyboards/sol/common/knob_v2.h b/keyboards/sol/common/knob_v2.h deleted file mode 100644 index 45196eb1a6..0000000000 --- a/keyboards/sol/common/knob_v2.h +++ /dev/null @@ -1,28 +0,0 @@ -// Rotary knob implementation - Version 2. -// Uses 2 digital pins - D2 (via interrupt) & D6. -// #include "rev1.h" -#include <avr/io.h> -#include <avr/interrupt.h> -#include <stdbool.h> - -#ifndef ENCODER_PIN_1 - #define ENCODER_PIN_1 PD2 -#endif -#ifndef ENCODER_PIN_2 - #define ENCODER_PIN_2 PD6 -#endif -#ifndef ENCODER_INT - #define ENCODER_INT INT2_vect -#endif - -typedef struct knob_report_t { - int8_t dir; // Contains number of rotations that happened - int8_t phase; // Contains 0 if last rotation happened on 90 degrees, 1 if on 270 -} knob_report_t; - -void knob_init(void); -knob_report_t knob_report_read(void); -void knob_report_reset(void); - -bool knob_prev_a; -int8_t knob_dir; diff --git a/keyboards/sol/common/ssd1306.c b/keyboards/sol/common/ssd1306.c deleted file mode 100644 index b3e55a67c2..0000000000 --- a/keyboards/sol/common/ssd1306.c +++ /dev/null @@ -1,329 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#ifndef LOCAL_GLCDFONT -#include "common/glcdfont.c" -#else -#include <helixfont.h> -#endif -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(bool rotate) { - bool success = false; - - i2c_master_init(); - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - - if(rotate){ - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); - }else{ - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); - } - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - //i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty) { - iota_gfx_flush(); - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} -#endif diff --git a/keyboards/sol/common/ssd1306.h b/keyboards/sol/common/ssd1306.h deleted file mode 100644 index 77ce7c211a..0000000000 --- a/keyboards/sol/common/ssd1306.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef SSD1306_H -#define SSD1306_H - -#include <stdbool.h> -#include <stdio.h> -#include "pincontrol.h" - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - -// Controls the SSD1306 128x32 OLED display via i2c - -#ifndef SSD1306_ADDRESS -#define SSD1306_ADDRESS 0x3C -#endif - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -struct CharacterMatrix display; - -bool iota_gfx_init(bool rotate); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -void iota_gfx_task_user(void); - -void matrix_clear(struct CharacterMatrix *matrix); -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write(struct CharacterMatrix *matrix, const char *data); -void matrix_write_P(struct CharacterMatrix *matrix, const char *data); -void matrix_render(struct CharacterMatrix *matrix); - - - -#endif diff --git a/keyboards/sol/config.h b/keyboards/sol/config.h deleted file mode 100644 index 93fd2261b1..0000000000 --- a/keyboards/sol/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - diff --git a/keyboards/sol/i2c.c b/keyboards/sol/i2c.c deleted file mode 100644 index 4bee5c6398..0000000000 --- a/keyboards/sol/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/sol/i2c.h b/keyboards/sol/i2c.h deleted file mode 100644 index 47cf6bd1b2..0000000000 --- a/keyboards/sol/i2c.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef I2C_H -#define I2C_H - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/sol/keymaps/brianweyer/config.h b/keyboards/sol/keymaps/brianweyer/config.h deleted file mode 100755 index 87b7dd2ac0..0000000000 --- a/keyboards/sol/keymaps/brianweyer/config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define SSD1306OLED - - -// place overrides here - diff --git a/keyboards/sol/keymaps/brianweyer/keymap.c b/keyboards/sol/keymaps/brianweyer/keymap.c deleted file mode 100755 index 2259e246d2..0000000000 --- a/keyboards/sol/keymaps/brianweyer/keymap.c +++ /dev/null @@ -1,291 +0,0 @@ -#include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "common/ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum layer_number { - _QWERTY = 0, - _FN, - _ADJ -}; - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - FN, - ADJ, - RGBRST -}; - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* QWERTY - * ,------------------------------------------------. ,------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | - | | = | 6 | 7 | 8 | 9 | 0 | Bspc | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \ | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | Esc | A | S | D | F | G | | | | H | J | K | L | ; | ' | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | | | | N | M | , | . | / | Shift| - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Ctrl | Alt | FN | LGui | RGB | Spc | Del | | Bspc | Spc | Adj | LGui | FN | Alt | Ctrl | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Spc | Ent | | Ent | Spc | - * `-------------' `-------------' - */ - [_QWERTY] = LAYOUT_kc( \ - //,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+ - GRV, 1, 2, 3, 4, 5, MINS, EQL, 6, 7, 8, 9, 0, BSPC, - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - TAB, Q, W, E, R, T, LBRC, RBRC, Y, U, I, O, P, BSLS, - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - ESC, A, S, D, F, G, _______, _______, H, J, K, L, SCLN, QUOT, - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - LSPO, Z, X, C, V, B, _______, _______, N, M, COMM, DOT, SLSH, RSPC, - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - LCTL, LALT, FN, LGUI, RGB_MOD, SPC, DEL, BSPC, SPC, ADJ, LGUI, FN, LALT, LCTL, - //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------| - VOLD, VOLU, SPC, ENT, ENT, SPC, DOWN, UP - // Rotary Left |--------+--------| |--------+-----------+ Rotary Right - ), - - /* FN - * ,------------------------------------------------. ,------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | | | Up | | | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | | Left | Down | Right| | | | | Play | Next | Mute | V-Up |V-Down| | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | - * `-------------' `-------------' - */ - [_FN] = LAYOUT_kc( \ - //,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+ - F1, F2, F3, F4, F5, F6, _______, _______, F7, F8, F9, F10, F11, F12, - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - _______, _______, _______, UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - _______, _______, LEFT, DOWN, RGHT, _______, _______, _______, MPLY, MNXT, MUTE, VOLD, VOLU, _______, - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------| - VOLD, VOLU, _______, _______, _______, _______, UP, DOWN - // Rotary Left |--------+--------| |--------+-----------+ Rotary Right - ), - - /* ADJ - * ,------------------------------------------------. ,------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | Sat+ | Val+ | Hue+ |Speed+|Toggle| | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | Sat- | Val- | Hue- |Speed-|Reset | | | | |QWERTY| COLE | | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | - * `-------------' `-------------' - */ - - [_ADJ] = LAYOUT( \ - //,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+ - RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - _______, RGB_SAI, RGB_VAI, RGB_HUI, RGB_SPI, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, \ - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - _______, RGB_SAD, RGB_VAD, RGB_HUD, RGB_SPD, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, \ - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - //|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - //|--------+--------+--------+--------+--------+--+--------+--------| |--------+--------+--+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______ \ - // Rotary Left |--------+--------| |--------+--------+ Rotary Right - ) -}; - - -// define variables for reactive RGB -bool TOG_STATUS = false; -int RGB_current_mode; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case FN: - if (record->event.pressed) { - layer_on(_FN); - } else { - layer_off(_FN); - } - return false; - break; - case ADJ: - if (record->event.pressed) { - layer_on(_ADJ); - } else { - layer_off(_ADJ); - } - return false; - break; - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released - case RGBRST: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - eeconfig_update_rgblight_default(); - rgblight_enable(); - RGB_current_mode = rgblight_config.mode; - } - #endif - break; - } - return true; -} - -void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - -void matrix_scan_user(void) { - #ifdef SSD1306OLED - // led_test_init(); - iota_gfx_task(); // this is what updates the display continuously - #endif -} - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// hook point for 'led_test' keymap -// 'default' keymap's led_test_init() is empty function, do nothing -// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); -__attribute__ ((weak)) -void led_test_init(void) {} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_FN (1<<_FN) -#define L_ADJ (1<<_ADJ) -#define L_ADJ_TRI (L_ADJ|L_FN) - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); -} - - - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Laser")); - break; - case L_FN: - matrix_write_P(matrix, PSTR("Function")); - break; - case L_ADJ: - case L_ADJ_TRI: - matrix_write_P(matrix, PSTR("Adjustment")); - break; - default: - matrix_write(matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/sol/keymaps/brianweyer/rules.mk b/keyboards/sol/keymaps/brianweyer/rules.mk deleted file mode 100755 index d53ebe34dd..0000000000 --- a/keyboards/sol/keymaps/brianweyer/rules.mk +++ /dev/null @@ -1,46 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -LED_ANIMATIONS = yes # LED animations -LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) -OLED_ENABLE = yes # OLED_ENABLE (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) - -# Do not edit past here - -ifeq ($(strip $(OLED_ENABLE)), yes) - OPT_DEFS += -DOLED_ENABLE -endif - -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c -endif - -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif - -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif - -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif diff --git a/keyboards/sol/keymaps/danielhklein/config.h b/keyboards/sol/keymaps/danielhklein/config.h deleted file mode 100644 index 452cdda823..0000000000 --- a/keyboards/sol/keymaps/danielhklein/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - -// place overrides here - diff --git a/keyboards/sol/keymaps/danielhklein/keymap.c b/keyboards/sol/keymaps/danielhklein/keymap.c deleted file mode 100644 index 883b418268..0000000000 --- a/keyboards/sol/keymaps/danielhklein/keymap.c +++ /dev/null @@ -1,354 +0,0 @@ -#include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "common/ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum layer_number { - _QWERTY = 0, - _COLEMAK, - _FN, - _ADJ -}; - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - FN, - ADJ, - BACKLIT, - RGBRST -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - -// Define your non-alpha grouping in this define's LAYOUT, and all your BASE_LAYERS will share the same mod/macro columns - /* Base Layout - * ,------------------------------------------------. ,------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | - | | = | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | Tab | | | | | | [ | | ] | | | | | | Enter| - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | Caps | | | | | | { | | } | | | | | | ' | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * |Shift | | | | | | ` | | \ | | | | | |Shift | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Left | Down | Ctrl | Alt | Gui | Bspc | FN | | ADJ | Space| Gui | Alt | Ctrl | Up |Right | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | Bspc | FN | | ADJ | Space| - * `-------------' `-------------' - */ -#define BASE_LAYOUT( \ - _00, _01, _02, _03, _04, _05, _06, _07, _08, _09, \ - _10, _11, _12, _13, _14, _15, _16, _17, _18, _19, \ - _20, _21, _22, _23, _24, _25, _26, _27, _28, _29 \ -) \ -LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_TAB, _00, _01, _02, _03, _04, KC_LBRC, KC_RBRC, _05, _06, _07, _08, _09, KC_ENT, \ - KC_CAPS, _10, _11, _12, _13, _14, KC_LCBR, KC_RCBR, _15, _16, _17, _18, _19, KC_QUOT, \ - KC_LSFT, _20, _21, _22, _23, _24, KC_GRV, KC_BSLS, _25, _26, _27, _28, _29, KC_RSFT, \ - KC_LEFT, KC_DOWN, KC_LCTRL, KC_LALT, KC_LGUI, KC_BSPC, FN, ADJ, KC_SPC, KC_RGUI, KC_RALT, KC_RCTRL, KC_UP, KC_RIGHT, \ - KC_VOLU, KC_VOLD, KC_BSPC, FN, ADJ, KC_SPC, KC_VOLU, KC_VOLD \ -) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,------------------------------------------------. ,------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | Q | W | E | R | T | | | | Y | U | I | O | P | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | A | S | D | F | G | | | | H | J | K | L | ; | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | Z | X | C | V | B | | | | N | M | , | . | / | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' - */ - [_QWERTY] = BASE_LAYOUT( \ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH \ - ), - - /* Colemak - * ,------------------------------------------------. ,------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | Q | W | F | P | G | | | | J | L | U | Y | ; | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | A | R | S | T | D | | | | H | N | E | I | O | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | Z | X | C | V | B | | | | K | M | , | . | / | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `--------=----' - */ - [_COLEMAK] = BASE_LAYOUT( \ - KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, \ - KC_A, KC_R, KC_S, KC_T, KC_G, KC_K, KC_N, KC_E, KC_I, KC_O, \ - KC_Z, KC_X, KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, KC_DOT, KC_SLSH \ - ), - - - /* FN - * ,------------------------------------------------. ,------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | | | | | | | | | | PGDN | UP | PGUP | PRINT| HOME | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | | | | | | | | | | LEFT | DOWN | RIGHT|INSERT| END | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * |Shift | | | | | | | | | PLAY | MUTE | VOL- | VOL+ | LAST | NEXT | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | Gui | | | | | | | | | | | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' - */ - [_FN] = LAYOUT( \ - XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \ - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ - ), - - /* ADJ - * ,------------------------------------------------. ,------------------------------------------------. - * |RESET | F1 | F2 | F3 | F4 | F5 | F6 | | | = | / | * | - | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | | 7 | 8 | 9 | + | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | HUI | VAI | SAI | | |COLEMK| | | 4 | 5 | 6 | Enter| | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | HUD | VAD | SAD | | |QWERTY| | | 1 | 2 | 3 | Space| | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | |RGBRST|RGBTOG|RGBMOD|RGBSMD| | | | | | 0 | . | Bspc | | | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' - */ - - [_ADJ] = LAYOUT( \ - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_PEQL, KC_PSLS, KC_PAST, KC_PMNS, XXXXXXX, XXXXXXX, \ - XXXXXXX, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_P7, KC_P8, KC_P9, KC_PPLS, XXXXXXX, XXXXXXX, \ - XXXXXXX, RGB_SAD, RGB_VAI, RGB_SAI, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PENT, XXXXXXX, XXXXXXX, \ - XXXXXXX, RGB_HUD, RGB_VAD, RGB_HUI, XXXXXXX, XXXXXXX, QWERTY, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_SPC, XXXXXXX, XXXXXXX, \ - XXXXXXX, RGBRST, RGB_TOG, RGB_MOD, RGB_RMOD, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_P0, KC_PDOT, KC_BSPC, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX \ - ) -}; - -// define variables for reactive RGB -bool TOG_STATUS = false; -int RGB_current_mode; - -// Setting ADJ layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(RGB_current_mode); - #endif - layer_on(layer3); - } else { - layer_off(layer3); - } -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - //uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if(record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case FN: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(15); - #endif - } - layer_on(_FN); - } else { - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change - #endif - layer_off(_FN); - TOG_STATUS = false; - } - return false; - break; - case ADJ: - if (record->event.pressed) { - layer_on(_ADJ); - } else { - layer_off(_ADJ); - } - return false; - break; - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released - case RGBRST: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - eeconfig_update_rgblight_default(); - rgblight_enable(); - RGB_current_mode = rgblight_config.mode; - } - #endif - break; - } - return true; -} - -void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// hook point for 'led_test' keymap -// 'default' keymap's led_test_init() is empty function, do nothing -// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); -__attribute__ ((weak)) -void led_test_init(void) {} - -void matrix_scan_user(void) { - led_test_init(); - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_FN (1<<_FN) -#define L_ADJ (1<<_ADJ) - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - - - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Default")); - break; - case L_FN: - matrix_write_P(matrix, PSTR("FN")); - break; - case L_ADJ: - case L_ADJ_TRI: - matrix_write_P(matrix, PSTR("ADJ")); - break; - default: - matrix_write(matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/sol/keymaps/danielhklein/rules.mk b/keyboards/sol/keymaps/danielhklein/rules.mk deleted file mode 100644 index 199dad6fcd..0000000000 --- a/keyboards/sol/keymaps/danielhklein/rules.mk +++ /dev/null @@ -1,50 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) - -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -RGBLIGHT_ANIMATIONS = yes # LED animations -LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) - -OLED_ENABLE = no # OLED_ENABLE (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) - -# Do not edit past here - -ifeq ($(strip $(OLED_ENABLE)), yes) - OPT_DEFS += -DOLED_ENABLE -endif - -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c - -endif - -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE - -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif - -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif - -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif diff --git a/keyboards/sol/keymaps/default/config.h b/keyboards/sol/keymaps/default/config.h deleted file mode 100644 index 452cdda823..0000000000 --- a/keyboards/sol/keymaps/default/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - -// place overrides here - diff --git a/keyboards/sol/keymaps/default/keymap.c b/keyboards/sol/keymaps/default/keymap.c deleted file mode 100644 index 799507f66f..0000000000 --- a/keyboards/sol/keymaps/default/keymap.c +++ /dev/null @@ -1,362 +0,0 @@ -#include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "common/ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum layer_number { - _QWERTY = 0, - _COLEMAK, - _FN, - _ADJ -}; - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - FN, - ADJ, - BACKLIT, - RGBRST -}; - -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - - - -#define FN_ESC LT(_FN, KC_ESC) -#define FN_CAPS LT(_FN, KC_CAPS) - -// Define your non-alpha grouping in this define's LAYOUT, and all your BASE_LAYERS will share the same mod/macro columns - /* Base Layout - * ,------------------------------------------------. ,------------------------------------------------. - * | GESC | | | | | | - | | = | | | | | | BkSp | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | Tab | | | | | | [ | | ] | | | | | | \ | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * |FN(CAPS)| | | | | | ( | | ) | | | | | | ' | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * |Shift | | | | | | { | | } | | | | | |Shift | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | Space| DEL | | Enter| Space| - * `-------------' `-------------' - */ -#define BASE_LAYOUT( \ - _00, _01, _02, _03, _04, _05, _06, _07, _08, _09, \ - _10, _11, _12, _13, _14, _15, _16, _17, _18, _19, \ - _20, _21, _22, _23, _24, _25, _26, _27, _28, _29 \ -) \ -LAYOUT( \ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, _00, _01, _02, _03, _04, KC_LBRC, KC_RBRC, _05, _06, _07, _08, _09, KC_BSLS, \ - FN_CAPS, _10, _11, _12, _13, _14, KC_LPRN, KC_RPRN, _15, _16, _17, _18, _19, KC_QUOT, \ - KC_LSFT, _20, _21, _22, _23, _24, KC_LCBR, KC_RCBR, _25, _26, _27, _28, _29, KC_ENT, \ - KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJ, KC_SPC, KC_DEL, KC_ENT, KC_SPC, FN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, \ - KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \ -) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,------------------------------------------------. ,------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | Q | W | E | R | T | | | | Y | U | I | O | P | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | A | S | D | F | G | | | | H | J | K | L | ; | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | Z | X | C | V | B | | | | N | M | , | . | / | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `--------=----' - */ - [_QWERTY] = BASE_LAYOUT( \ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH \ - ), - - /* Colemak - * ,------------------------------------------------. ,------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | Q | W | F | P | G | | | | J | L | U | Y | ; | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | A | R | S | T | D | | | | H | N | E | I | O | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | Z | X | C | V | B | | | | K | M | , | . | / | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `--------=----' - */ - [_COLEMAK] = BASE_LAYOUT( \ - KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, \ - KC_A, KC_R, KC_S, KC_T, KC_G, KC_K, KC_N, KC_E, KC_I, KC_O, \ - KC_Z, KC_X, KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, KC_DOT, KC_SLSH \ - ), - - - /* FN - * ,------------------------------------------------. ,------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | PGDN | UP | PGUP | | | | | | | PGDN | UP | PGUP | PRINT| HOME | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | LEFT | DOWN | RIGHT| | | | | | | LEFT | DOWN | RIGHT|INSERT| END | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | |RGBMOD| | | | | | | PLAY | NEXT | MUTE | VOL- | VOL+ | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' - */ - [_FN] = LAYOUT( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_PSCR, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - _______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, _______, _______, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \ - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \ - KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \ - ), - - /* ADJ - * ,------------------------------------------------. ,------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | SAD | VAI | SAI | RESET| | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | HUD | VAD | HUI |RGBRST| | | | | |QWERTY|COLEMK| | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | |RGBTOG| HUI | SAI | VAI | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | |RGBMOD(| | | | | | | |RGBRMOD| HUD | SAD | VAD | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' - */ - - [_ADJ] = LAYOUT( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - _______, RGB_SAD, RGB_VAI, RGB_SAI, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \ - KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \ - ) -}; - - - -// define variables for reactive RGB -bool TOG_STATUS = false; -int RGB_current_mode; - -// Setting ADJ layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(RGB_current_mode); - #endif - layer_on(layer3); - } else { - layer_off(layer3); - } -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - //uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); - - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if(record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case FN: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(15); - #endif - } - layer_on(_FN); - } else { - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change - #endif - layer_off(_FN); - TOG_STATUS = false; - } - return false; - break; - case ADJ: - if (record->event.pressed) { - layer_on(_ADJ); - } else { - layer_off(_ADJ); - } - return false; - break; - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released - case RGBRST: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - eeconfig_update_rgblight_default(); - rgblight_enable(); - RGB_current_mode = rgblight_config.mode; - } - #endif - break; - } - return true; -} - -void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -// hook point for 'led_test' keymap -// 'default' keymap's led_test_init() is empty function, do nothing -// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); -__attribute__ ((weak)) -void led_test_init(void) {} - -void matrix_scan_user(void) { - led_test_init(); - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_FN (1<<_FN) -#define L_ADJ (1<<_ADJ) - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - - - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Default")); - break; - case L_FN: - matrix_write_P(matrix, PSTR("FN")); - break; - case L_ADJ: - case L_ADJ_TRI: - matrix_write_P(matrix, PSTR("ADJ")); - break; - default: - matrix_write(matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/sol/keymaps/default/readme.md b/keyboards/sol/keymaps/default/readme.md deleted file mode 100644 index f5f3845551..0000000000 --- a/keyboards/sol/keymaps/default/readme.md +++ /dev/null @@ -1,133 +0,0 @@ -# The Default Sol Layout -## Layout - -### Base modifier layout -``` - * ,------------------------------------------------. ,------------------------------------------------. - * | GESC | | | | | | - | | = | | | | | | BkSp | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | Tab | | | | | | [ | | ] | | | | | | \ | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * |FN(CAPS)| | | | | | ( | | ) | | | | | | ' | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * |Shift | | | | | | { | | } | | | | | |Shift | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | Space| DEL | | Enter| Space| - * `-------------' `-------------' -``` - -### Qwerty alphas -``` - * ,------------------------------------------------. ,------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | Q | W | E | R | T | | | | Y | U | I | O | P | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | A | S | D | F | G | | | | H | J | K | L | ; | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | Z | X | C | V | B | | | | N | M | , | . | / | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' -``` - -### Colemak alphas -``` - * ,------------------------------------------------. ,------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | Q | W | F | P | B | | | | J | L | U | Y | ; | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | A | R | S | T | G | | | | K | N | E | I | O | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | Z | X | C | D | V | | | | M | H | , | . | / | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' -``` - -### Function (FN) -``` - * ,------------------------------------------------. ,------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | PGDN | UP | PGUP | | | | | | | PGDN | UP | PGUP | PRINT| HOME | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | LEFT | DOWN | RIGHT| | | | | | | LEFT | DOWN | RIGHT|INSERT| END | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | |RGBMOD| | | | | | | PLAY | NEXT | MUTE | VOL- | VOL+ | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' -``` - -### Adjust (ADJ) -``` - * ,------------------------------------------------. ,------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | SAD | VAI | SAI | RESET| | | | | | | | | | | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | | HUD | VAD | HUI |RGBRST| | | | | |QWERTY|COLEMK| | | | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | | | | | | | | | |RGBTOG| HUI | SAI | VAI | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | | | |RGBMOD| | | | | | | |RGBSMOD| HUD | SAD | VAD | - * `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' - * | | | | | | - * `-------------' `-------------' -``` - -## Customize - -see `qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk` - -``` - -# Variables you can set for SOL - -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -LED_ANIMATIONS = yes # LED animations -LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) - -OLED_ENABLE = no # OLED_ENABLE (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) - - -``` -## Compile - -go to qmk top directory. -``` -$ cd qmk_firmware -``` - -build -``` -$ make sol:default -``` - -After the initial flash with AVRdudess, you should be able to flash using this: -``` -$ make sol:default:dfu -``` diff --git a/keyboards/sol/keymaps/default/rules.mk b/keyboards/sol/keymaps/default/rules.mk deleted file mode 100644 index a098cfd789..0000000000 --- a/keyboards/sol/keymaps/default/rules.mk +++ /dev/null @@ -1,50 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) - -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -RGBLIGHT_ANIMATIONS = yes # LED animations -LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) - -OLED_ENABLE = no # OLED_ENABLE (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) - -# Do not edit past here - -ifeq ($(strip $(OLED_ENABLE)), yes) - OPT_DEFS += -DOLED_ENABLE -endif - -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c - -endif - -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE - -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif - -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif - -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif
\ No newline at end of file diff --git a/keyboards/sol/keymaps/kageurufu/keymap.c b/keyboards/sol/keymaps/kageurufu/keymap.c deleted file mode 100644 index 9ea89db058..0000000000 --- a/keyboards/sol/keymaps/kageurufu/keymap.c +++ /dev/null @@ -1,79 +0,0 @@ -#include QMK_KEYBOARD_H -#include "kageurufu.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif - -extern keymap_config_t keymap_config; -extern uint8_t is_master; - -/* Base Layout - * ,------------------------------------------------. ,------------------------------------------------. - * | ` | | | | | | | | | | | | | | BkSp | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | Tab | | | | | | | | | | | | | | \ | - * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| - * | Esc | | | | | | | | | | | | | | ' | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Sft( | | | | | | | | | | | | | | Sft) | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Ctrl | Win | Win | Alt | FN | Space| RGB | | FN | FN | - | = | Down | PgUp | PgDn | - * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Space| Bksp | | Enter| Space| - * `-------------' `--------=----' - */ -#define EXPAND_LAYOUT(...) LAYOUT(__VA_ARGS__) -#define _BASE_LAYOUT( \ - _00, _01, _02, _03, _04, _05, _06, _07, _08, _09, \ - _10, _11, _12, _13, _14, _15, _16, _17, _18, _19, \ - _20, _21, _22, _23, _24, _25, _26, _27, _28, _29 \ -) \ -EXPAND_LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, RGB_MOD, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, _00, _01, _02, _03, _04, KC_LBRC, KC_RBRC, _05, _06, _07, _08, _09, KC_BSLS, \ - FN_ESC, _10, _11, _12, _13, _14, RGB_SAI, RGB_VAI, _15, _16, _17, _18, _19, KC_QUOT, \ - KC_LSPO, _20, _21, _22, _23, _24, RGB_SAD, RGB_VAD, _25, _26, _27, _28, _29, KC_RSPC, \ - KC_LCTL, KC_LGUI, KC_LGUI, KC_LALT, FN, KC_SPC, FN, FN, KC_SPC, KC_MINS, KC_EQL, KC_DOWN, KC_PGUP, KC_PGDN, \ - KC_VOLD, KC_VOLU, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, KC_VOLD, KC_VOLU \ -) -#define BASE_LAYOUT(...) _BASE_LAYOUT(__VA_ARGS__) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = BASE_LAYOUT( \ - _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, \ - _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, \ - _________________QWERTY_L3_________________, _________________QWERTY_R3_________________ \ - ), - - [_COLEMAK] = BASE_LAYOUT( \ - _________________COLEMAK_L1________________, _________________COLEMAK_R1________________, \ - _________________COLEMAK_L2________________, _________________COLEMAK_R2________________, \ - _________________COLEMAK_L3________________, _________________COLEMAK_R3________________ \ - ), - - [_COLEMAK_DH] = BASE_LAYOUT( \ - ______________COLEMAK_MOD_DH_L1____________, ______________COLEMAK_MOD_DH_R1____________, \ - ______________COLEMAK_MOD_DH_L2____________, ______________COLEMAK_MOD_DH_R2____________, \ - ______________COLEMAK_MOD_DH_L3____________, ______________COLEMAK_MOD_DH_R3____________ \ - ), - - [_FN] = EXPAND_LAYOUT( \ - ________________FUNCTION_L1________________, _______, KC_PSCR, ________________FUNCTION_R1________________, \ - ________________FUNCTION_L2________________, _______, _______, ________________FUNCTION_R2________________, \ - ________________FUNCTION_L3________________, _______, _______, ________________FUNCTION_R3________________, \ - ________________FUNCTION_L4________________, _______, _______, ________________FUNCTION_R4________________, \ - ________________FUNCTION_L5________________, ADJ, ADJ, ________________FUNCTION_R5________________, \ - KC_VOLD, KC_VOLU, _______, KC_DEL, _______, _______, KC_VOLD, KC_VOLU \ - ), - - [_ADJ] = EXPAND_LAYOUT( \ - _________________ADJUST_L1_________________, _______, _______, _________________ADJUST_R1_________________, \ - _________________ADJUST_L2_________________, _______, _______, _________________ADJUST_R2_________________, \ - _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, \ - _________________ADJUST_L4_________________, _______, _______, _________________ADJUST_R4_________________, \ - _________________ADJUST_L5_________________, _______, _______, _________________ADJUST_R5_________________, \ - KC_VOLD, KC_VOLU, _______, _______, _______, _______, KC_VOLD, KC_VOLU \ - ) -}; diff --git a/keyboards/sol/keymaps/kageurufu/rules.mk b/keyboards/sol/keymaps/kageurufu/rules.mk deleted file mode 100644 index d098168fd5..0000000000 --- a/keyboards/sol/keymaps/kageurufu/rules.mk +++ /dev/null @@ -1,46 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -LED_ANIMATIONS = yes # LED animations -LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing -ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) -OLED_ENABLE = no # OLED_ENABLE (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) - -# Do not edit past here - -ifeq ($(strip $(OLED_ENABLE)), yes) - OPT_DEFS += -DOLED_ENABLE -endif - -ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) - OPT_DEFS += -DENCODER_ENABLE_CUSTOM - SRC += common/knob_v2.c -endif - -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif - -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif - -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif diff --git a/keyboards/sol/readme.md b/keyboards/sol/readme.md deleted file mode 100644 index 65e89ff635..0000000000 --- a/keyboards/sol/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Sol - - - -Sol is a split ergonomic keyboard with ortholinear alphas and several modifier layouts. It can use up to 88 RGB LEDs, with per-key backlighting and underglow. The boards have presoldered components, including type C ports and ATmega32U4. Sol, when used with dual power supplies, is the brightest keyboard on earth. - -Keyboard Maintainer: [Legonut](https://github.com/Legonut) -Hardware Supported: Sol PCB R1.0, R1.1 -Hardware Availability: [RGBKB](https://www.rgbkb.net) - -Make example for this keyboard (after setting up your build environment): - - make sol:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sol/rev1/config.h b/keyboards/sol/rev1/config.h deleted file mode 100644 index bfdadf9f6c..0000000000 --- a/keyboards/sol/rev1/config.h +++ /dev/null @@ -1,147 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER RGBKB -#define PRODUCT Sol -#define DESCRIPTION "An RGB, split, ortho-esque keyboard" - -#define PREVENT_STUCK_MODIFIERS -#define TAPPING_FORCE_HOLD -#define TAPPING_TERM 150 - -#define USE_I2C -#define USE_SERIAL -#define USE_SERIAL_PD3 - -/* Select hand configuration */ -#define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - -// Helix keyboard OLED support -// see ./rules.mk: OLED_ENABLE=yes or no -#ifdef OLED_ENABLE - #define SSD1306OLED -#endif - -/* Select rows configuration */ -// Rows are 4 or 5 -// #define HELIX_ROWS 5 see ./rules.mk - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6} - -// wiring of each half -#define MATRIX_COLS 7 -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 } -// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#define RGB_DI_PIN B3 -#define RGBLIGHT_TIMER -//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -#define DRIVER_COUNT 2 -#define DRIVER_LED_TOTAL 70 -// #define RGB_MATRIX_KEYPRESSES -#define BACKLIGHT_PIN B7 -#define BACKLIGHT_LEVELS 5 - -#ifdef LED_MIRRORED - #define RGBLED_NUM 35 -#else - #define RGBLED_NUM 70 -#endif - -#define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950 - -#ifdef IOS_DEVICE_ENABLE - #define RGBLIGHT_LIMIT_VAL 40 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 40 -#elif RGBLIGHT_FULL_POWER - #define RGBLIGHT_LIMIT_VAL 255 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 -#else - #define RGBLIGHT_LIMIT_VAL 120 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 -#endif - -#define RGBLIGHT_VAL_STEP (RGBLIGHT_LIMIT_VAL / 10) -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - -#define RGBLIGHT_ANIMATIONS - -#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) -// USB_MAX_POWER_CONSUMPTION value for Helix keyboard -// 120 RGBoff, OLEDoff -// 120 OLED -// 330 RGB 6 -// 300 RGB 32 -// 310 OLED & RGB 32 - #define USB_MAX_POWER_CONSUMPTION 500 -#else - // fix iPhone and iPad power adapter issue - // iOS device need lessthan 100 - #define USB_MAX_POWER_CONSUMPTION 100 -#endif - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/sol/rev1/info.json b/keyboards/sol/rev1/info.json deleted file mode 100644 index 40bc01f7ff..0000000000 --- a/keyboards/sol/rev1/info.json +++ /dev/null @@ -1,91 +0,0 @@ -{ - "keyboard_name": "Sol", - "url": "", - "maintainer": "Legonut", - "width": 17, - "height": 6.5, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"L00", "x":0, "y":0, "w":1.5}, - {"label":"L01", "x":1.5, "y":0}, - {"label":"L02", "x":2.5, "y":0}, - {"label":"L03", "x":3.5, "y":0}, - {"label":"L04", "x":4.5, "y":0}, - {"label":"L05", "x":5.5, "y":0}, - {"label":"L06", "x":6.75, "y":0}, - {"label":"R06", "x":9.25, "y":0}, - {"label":"R00", "x":10.5, "y":0}, - {"label":"R01", "x":11.5, "y":0}, - {"label":"R02", "x":12.5, "y":0}, - {"label":"R03", "x":13.5, "y":0}, - {"label":"R04", "x":14.5, "y":0}, - {"label":"R05", "x":15.5, "y":0, "w":1.5}, - {"label":"L10", "x":0, "y":1, "w":1.5}, - {"label":"L11", "x":1.5, "y":1}, - {"label":"L12", "x":2.5, "y":1}, - {"label":"L13", "x":3.5, "y":1}, - {"label":"L14", "x":4.5, "y":1}, - {"label":"L15", "x":5.5, "y":1}, - {"label":"L16", "x":6.75, "y":1}, - {"label":"R16", "x":9.25, "y":1}, - {"label":"R10", "x":10.5, "y":1}, - {"label":"R11", "x":11.5, "y":1}, - {"label":"R12", "x":12.5, "y":1}, - {"label":"R13", "x":13.5, "y":1}, - {"label":"R14", "x":14.5, "y":1}, - {"label":"R15", "x":15.5, "y":1, "w":1.5}, - {"label":"L20", "x":0, "y":2, "w":1.5}, - {"label":"L21", "x":1.5, "y":2}, - {"label":"L22", "x":2.5, "y":2}, - {"label":"L23", "x":3.5, "y":2}, - {"label":"L24", "x":4.5, "y":2}, - {"label":"L25", "x":5.5, "y":2}, - {"label":"L26", "x":6.75, "y":2}, - {"label":"R26", "x":9.25, "y":2}, - {"label":"R20", "x":10.5, "y":2}, - {"label":"R21", "x":11.5, "y":2}, - {"label":"R22", "x":12.5, "y":2}, - {"label":"R23", "x":13.5, "y":2}, - {"label":"R24", "x":14.5, "y":2}, - {"label":"R25", "x":15.5, "y":2, "w":1.5}, - {"label":"L30", "x":0, "y":3, "w":1.5}, - {"label":"L31", "x":1.5, "y":3}, - {"label":"L32", "x":2.5, "y":3}, - {"label":"L33", "x":3.5, "y":3}, - {"label":"L34", "x":4.5, "y":3}, - {"label":"L35", "x":5.5, "y":3}, - {"label":"L36", "x":6.75, "y":3}, - {"label":"R36", "x":9.25, "y":3}, - {"label":"R30", "x":10.5, "y":3}, - {"label":"R31", "x":11.5, "y":3}, - {"label":"R32", "x":12.5, "y":3}, - {"label":"R33", "x":13.5, "y":3}, - {"label":"R34", "x":14.5, "y":3}, - {"label":"R35", "x":15.5, "y":3, "w":1.5}, - {"label":"L40", "x":0, "y":4, "w":1.5}, - {"label":"L41", "x":1.5, "y":4}, - {"label":"L42", "x":2.5, "y":4}, - {"label":"L43", "x":3.5, "y":4}, - {"label":"L44", "x":4.5, "y":4}, - {"label":"L45", "x":6, "y":4.5}, - {"label":"L46", "x":7, "y":4.5}, - {"label":"R46", "x":9, "y":4.5}, - {"label":"R40", "x":10, "y":4.5}, - {"label":"R41", "x":11.5, "y":4}, - {"label":"R42", "x":12.5, "y":4}, - {"label":"R43", "x":13.5, "y":4}, - {"label":"R44", "x":14.5, "y":4}, - {"label":"R45", "x":15.5, "y":4, "w":1.5}, - {"label":"Left Encoder, Counter-Clockwise", "x":2.5, "y":5.5}, - {"label":"Left Encoder, Clockwise", "x":3.5, "y":5.5}, - {"label":"L55", "x":6, "y":5.5}, - {"label":"L56", "x":7, "y":5.5}, - {"label":"R56", "x":9, "y":5.5}, - {"label":"R50", "x":10, "y":5.5}, - {"label":"Right Encoder, Counter-Clockwise", "x":12.5, "y":5.5}, - {"label":"Right Encoder, Clockwise", "x":13.5, "y":5.5} - ] - } - } -} diff --git a/keyboards/sol/rev1/matrix.c b/keyboards/sol/rev1/matrix.c deleted file mode 100644 index 804d8b9809..0000000000 --- a/keyboards/sol/rev1/matrix.c +++ /dev/null @@ -1,304 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include <drivers/avr/pro_micro.h> - -#include "serial.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#ifdef ENCODER_ENABLE_CUSTOM - #include "common/knob_v2.h" -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - #ifdef ENCODER_ENABLE_CUSTOM - knob_init(); //FOR ENCODER - #endif - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - #ifdef ENCODER_ENABLE_CUSTOM - knob_report_t knob_report = knob_report_read(); - - knob_report_reset(); - - matrix[5 + offset] &= 0b11111100; - if (knob_report.phase) { // I check for phase to avoid handling the rotation twice (on 90 and 270 degrees). - if (knob_report.dir > 0) { - matrix[5 + offset] |= 0b00000001; - } else if (knob_report.dir < 0) { - matrix[5 + offset] |= 0b00000010; - } - } - #endif - - return 1; -} - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - int ret=serial_update_buffers(); - if (ret ) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} - -uint8_t matrix_scan(void) -{ - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[offset+i] = serial_master_buffer[i]; - } - - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_master_buffer[i] = matrix[offset+i]; - } - - if( serial_transaction() ) { - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/sol/rev1/rev1.c b/keyboards/sol/rev1/rev1.c deleted file mode 100644 index 01ab577d45..0000000000 --- a/keyboards/sol/rev1/rev1.c +++ /dev/null @@ -1,15 +0,0 @@ -#include "sol.h" - - -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - //led_set_user(usb_led); -} -#endif - -void matrix_init_kb(void) { - - matrix_init_user(); -}; - diff --git a/keyboards/sol/rev1/rev1.h b/keyboards/sol/rev1/rev1.h deleted file mode 100644 index 27b5ac8966..0000000000 --- a/keyboards/sol/rev1/rev1.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef REV1_H -#define REV1_H - -#include "sol.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -//rgb led driver -#include "ws2812.h" -#endif - -#ifdef USE_I2C -#include <stddef.h> -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/interrupt.h> -#endif -#endif - -//void promicro_bootloader_jmp(bool program); -// LEL/LER/REL/RER are -// LeftEncoderLeft, LeftEncoderRight, RightEncoderLeft, and RightEncoderRight - -#define LAYOUT( \ - L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ - L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \ - LEL, LER, L55, L56, R56, R50, REL, RER \ - ) \ - { \ - { L00, L01, L02, L03, L04, L05, L06 }, \ - { L10, L11, L12, L13, L14, L15, L16 }, \ - { L20, L21, L22, L23, L24, L25, L26 }, \ - { L30, L31, L32, L33, L34, L35, L36 }, \ - { L40, L41, L42, L43, L44, L45, L46 }, \ - { LEL, LER, KC_NO, KC_NO, KC_NO, L55, L56 }, \ - { R05, R04, R03, R02, R01, R00, R06 }, \ - { R15, R14, R13, R12, R11, R10, R16 }, \ - { R25, R24, R23, R22, R21, R20, R26 }, \ - { R35, R34, R33, R32, R31, R30, R36 }, \ - { R45, R44, R43, R42, R41, R40, R46 }, \ - { REL, RER, KC_NO, KC_NO, KC_NO, R50, R56 } \ - } - -#define KC________ KC_TRNS -#define KC_RGB_MOD RGB_MOD -#define KC_FN FN -#define KC_ADJ ADJ -#define LAYOUT_kc( \ - L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ - L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \ - LEL, LER, L55, L56, R56, R50, REL, RER \ - ) \ - LAYOUT( \ - KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ - KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ - KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ - KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \ - KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, \ - KC_##LEL, KC_##LER, KC_##L55, KC_##L56, KC_##R56, KC_##R50, KC_##REL, KC_##RER \ - ) - -#endif diff --git a/keyboards/sol/rev1/rules.mk b/keyboards/sol/rev1/rules.mk deleted file mode 100644 index 99f4dd896c..0000000000 --- a/keyboards/sol/rev1/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -SRC += rev1/matrix.c \ - rev1/split_util.c diff --git a/keyboards/sol/rev1/split_util.c b/keyboards/sol/rev1/split_util.c deleted file mode 100644 index c645bbdfef..0000000000 --- a/keyboards/sol/rev1/split_util.c +++ /dev/null @@ -1,54 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "serial.h" - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - #if defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - serial_master_init(); -} - -static void keyboard_slave_setup(void) { - serial_slave_init(); -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); -} diff --git a/keyboards/sol/rev1/split_util.h b/keyboards/sol/rev1/split_util.h deleted file mode 100644 index 59b3624152..0000000000 --- a/keyboards/sol/rev1/split_util.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include <stdbool.h> -#include "eeconfig.h" - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); - -void matrix_master_OLED_init (void); - -#endif diff --git a/keyboards/sol/rules.mk b/keyboards/sol/rules.mk deleted file mode 100644 index aa18721b6c..0000000000 --- a/keyboards/sol/rules.mk +++ /dev/null @@ -1,66 +0,0 @@ -SRC += i2c.c \ - serial.c \ - common/ssd1306.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = qmk-dfu - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -CUSTOM_MATRIX = yes - -DEFAULT_FOLDER = sol/rev1 diff --git a/keyboards/sol/serial.c b/keyboards/sol/serial.c deleted file mode 100644 index 169b4b176c..0000000000 --- a/keyboards/sol/serial.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef USE_SERIAL - -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// Serial pulse period in microseconds. -#define SELECT_SERIAL_SPEED 1 -#if SELECT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #define READ_WRITE_START_ADJUST 23 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 50 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#else -#error Illegal Serial Speed -#endif - - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH 1 -#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input_with_pullup(); - - -// Enable INT3 -EIMSK |= _BV(INT3); -// Trigger on falling edge of INT3 -EICRA &= ~(_BV(ISC30) | _BV(ISC31)); - -} - -// Used by the sender to synchronize timing with the reciver. -static -void sync_recv(void) { - for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - _delay_sub_us(READ_WRITE_START_ADJUST); - for ( uint8_t i = 0; i < 8; ++i) { - serial_delay_half1(); // read the middle of pulses - byte = (byte << 1) | serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 1<<7; - while( b ) { - if(data & b) { - serial_high(); - } else { - serial_low(); - } - b >>= 1; - serial_delay(); - } - serial_low(); // sync_send() / senc_recv() need raise edge -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - serial_output(); - - // slave send phase - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_slave_buffer[i]); - checksum += serial_slave_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // slave switch to input - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 - - // slave recive phase - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_master_buffer[i] = serial_read_byte(); - checksum_computed += serial_master_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } - - sync_recv(); //weit master output to high -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH); - - // wait for the slaves response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - sei(); - return 1; - } - - // master recive phase - // if the slave is present syncronize with it - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_slave_buffer[i] = serial_read_byte(); - checksum_computed += serial_slave_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if (checksum_computed != checksum_received) { - serial_output(); - serial_high(); - sei(); - return 2; - } - - // master switch to output - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); // 3 - serial_delay_half1(); //4 - - // master send phase - uint8_t checksum = 0; - - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_master_buffer[i]); - checksum += serial_master_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // always, release the line when not in use - sync_send(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/sol/serial.h b/keyboards/sol/serial.h deleted file mode 100644 index cd6bcc76bc..0000000000 --- a/keyboards/sol/serial.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include <stdbool.h> - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD3) //SErial pin goes here, D0-D3 -#define SERIAL_PIN_INTERRUPT INT3_vect //"INT#" of your serial pin - - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/sol/sol.c b/keyboards/sol/sol.c deleted file mode 100644 index 5945cc60a4..0000000000 --- a/keyboards/sol/sol.c +++ /dev/null @@ -1 +0,0 @@ -#include "sol.h" diff --git a/keyboards/sol/sol.h b/keyboards/sol/sol.h deleted file mode 100644 index 8f451ce56b..0000000000 --- a/keyboards/sol/sol.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef SOL_H -#define SOL_H - -#include "rev1.h" -#include "quantum.h" - -#endif |