diff options
Diffstat (limited to 'keyboards/snagpad')
| -rw-r--r-- | keyboards/snagpad/config.h | 26 | ||||
| -rw-r--r-- | keyboards/snagpad/keymaps/via/keymap.c | 76 | ||||
| -rw-r--r-- | keyboards/snagpad/keymaps/via/rules.mk | 76 |
3 files changed, 176 insertions, 2 deletions
diff --git a/keyboards/snagpad/config.h b/keyboards/snagpad/config.h index a14ead67fb..03906f33f5 100644 --- a/keyboards/snagpad/config.h +++ b/keyboards/snagpad/config.h @@ -3,8 +3,8 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 +#define VENDOR_ID 0x4443 // "DC" = Don Chiou +#define PRODUCT_ID 0x5350 // "SP" = Snagpad #define DEVICE_VER 0x0001 #define MANUFACTURER Flehrad #define PRODUCT Snagpad @@ -54,3 +54,25 @@ #define RGBLIGHT_VAL_STEP 8 #endif +// Does not use WT_MONO_BACKLIGHT +// #define WT_MONO_BACKLIGHT + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 + +// EEPROM usage + +// TODO: refactor with new user EEPROM code (coming soon) +#define EEPROM_MAGIC 0x451F +#define EEPROM_MAGIC_ADDR 32 +// Bump this every time we change what we store +// This will automatically reset the EEPROM with defaults +// and avoid loading invalid data from the EEPROM +#define EEPROM_VERSION 0x08 +#define EEPROM_VERSION_ADDR 34 + +// Dynamic keymap starts after EEPROM version +#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 +// Dynamic macro starts after dynamic keymaps (35+(4*5*4*2)) = (35+160) +#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 195 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 829 +#define DYNAMIC_KEYMAP_MACRO_COUNT 16
\ No newline at end of file diff --git a/keyboards/snagpad/keymaps/via/keymap.c b/keyboards/snagpad/keymaps/via/keymap.c new file mode 100644 index 0000000000..7fa226de77 --- /dev/null +++ b/keyboards/snagpad/keymaps/via/keymap.c @@ -0,0 +1,76 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), + + LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/snagpad/keymaps/via/rules.mk b/keyboards/snagpad/keymaps/via/rules.mk new file mode 100644 index 0000000000..032d68c5e9 --- /dev/null +++ b/keyboards/snagpad/keymaps/via/rules.mk @@ -0,0 +1,76 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = caterina + +# Boot Section Size in *bytes* +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +# This is the VIA magic +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes +SRC += keyboards/wilba_tech/wt_main.c + +LAYOUTS = ortho_5x4 numpad_5x4 |