diff options
Diffstat (limited to 'keyboards/roadkit/keymaps')
23 files changed, 0 insertions, 1166 deletions
diff --git a/keyboards/roadkit/keymaps/default/config.h b/keyboards/roadkit/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/roadkit/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/default/keymap.c b/keyboards/roadkit/keymaps/default/keymap.c deleted file mode 100644 index 4ec0f6cfdc..0000000000 --- a/keyboards/roadkit/keymaps/default/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define _NP 0 - -// Macro name shortcuts -#define NUMPAD M(_NP) - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NP] = LAYOUT_numpad_4x4( /* Numpad */ - KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_P4, KC_P5, KC_P6, \ - KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_P0, KC_PDOT \ - ), -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _NP: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_NP); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/roadkit/keymaps/default/readme.md b/keyboards/roadkit/keymaps/default/readme.md deleted file mode 100644 index 5984a71d1a..0000000000 --- a/keyboards/roadkit/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for roadkit diff --git a/keyboards/roadkit/keymaps/default/rules.mk b/keyboards/roadkit/keymaps/default/rules.mk deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/roadkit/keymaps/default/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/flipphone/config.h b/keyboards/roadkit/keymaps/flipphone/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/roadkit/keymaps/flipphone/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/flipphone/keymap.c b/keyboards/roadkit/keymaps/flipphone/keymap.c deleted file mode 100644 index fed9d02706..0000000000 --- a/keyboards/roadkit/keymaps/flipphone/keymap.c +++ /dev/null @@ -1,219 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -#ifdef BACKLIGHT_ENABLE - #include "backlight.h" -#endif - -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif - -void backlight_toggle(void){ -}; - -enum roadkit_layers { - _NUMPAD, - _FPH, - _FPHNOISY, - _ADJUST, - _DYN -}; - -enum roadkit_keycodes { - NUMPAD = SAFE_RANGE, - FPH_1, - FPH_2, - FPH_3, - FPH_4, - FPH_5, - FPH_6, - FPH_7, - FPH_8, - FPH_9, - FN_0, - BACKLIT, - MACSLEEP, - DYNAMIC_MACRO_RANGE, -}; - -#include "dynamic_macro.h" - -// Fillers to make keymaps cleaner looking -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */ - KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ - KC_KP_4, KC_KP_5, KC_KP_6, \ - KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ - LT(_ADJUST, KC_KP_0), KC_KP_DOT \ - ), - [_FPH] = LAYOUT_numpad_4x4( /* Quiet T9 */ - FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ - FPH_4, FPH_5, FPH_6, \ - FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ - LT(_ADJUST, KC_SPACE), KC_KP_DOT \ - ), - [_FPHNOISY] = LAYOUT_numpad_4x4( /* Noisy T9 */ - FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ - FPH_4, FPH_5, FPH_6, \ - FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ - LT(_ADJUST, KC_SPACE), KC_KP_DOT \ - ), - [_ADJUST] = LAYOUT_numpad_4x4( /* Adjustments */ - KC_NUMLOCK, TG(_FPHNOISY), TG(_FPH), TG(_NUMPAD), \ - KC_BSPC, BACKLIT, KC_DEL, \ - MACSLEEP, _______, _______, _______, \ - _______, MO(_DYN) \ - ), - [_DYN] = LAYOUT_numpad_4x4( /* DYNAMIC MACRO */ - DYN_REC_START1, DYN_REC_START2, _______, DYN_REC_STOP, \ - _______, _______, _______, \ - DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \ - _______, _______ \ - ), -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -uint16_t fph_tap_qty = false; -uint16_t fph_keycode = 0; // stores which spacebar was used, either raise or lower... - -uint16_t get_render_keycode(uint16_t keycode, uint16_t tap_qty){ // maybe replace shift with "mods" - tap_qty--; // reduce by one to match array indexes. - switch(keycode){ - case FPH_2: - {uint16_t kc[] = {KC_A, KC_B, KC_C}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_3: - {uint16_t kc[] = {KC_D, KC_E, KC_F}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_4: - {uint16_t kc[] = {KC_G, KC_H, KC_I}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_5: - {uint16_t kc[] = {KC_J, KC_K, KC_L}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_6: - {uint16_t kc[] = {KC_M, KC_N, KC_O}; - if(tap_qty % 6 > 2) - return LSFT(kc[tap_qty % 3]); - return kc[tap_qty % 3];} - break; - case FPH_7: - {uint16_t kc[] = {KC_P, KC_Q, KC_R, KC_S}; - if(tap_qty % 8 > 2) - return LSFT(kc[tap_qty % 4]); - return kc[tap_qty % 4];} - break; - case FPH_8: - {uint16_t kc[] = {KC_T, KC_U, KC_V}; - if(tap_qty % 8 > 2) - return LSFT(kc[tap_qty % 4]); - return kc[tap_qty % 4];} - break; - case FPH_9: - {uint16_t kc[] = {KC_W, KC_X, KC_Y, KC_Z}; - if(tap_qty % 8 > 2) - return LSFT(kc[tap_qty % 4]); - return kc[tap_qty % 4];} - break; - case FPH_1: - {uint16_t kc[] = {KC_COMM, LSFT(KC_SLSH), KC_EXLM, KC_AT, KC_MINS, KC_UNDS, KC_PLUS, \ - KC_SCLN, LSFT(KC_SCLN), KC_QUOT, LSFT(KC_QUOT), KC_TILD, \ - KC_PIPE, KC_BSLS, KC_HASH, LSFT(KC_4), KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, \ - KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, LSFT(KC_COMM), LSFT(KC_DOT)}; - return kc[tap_qty % 26];} - } - return KC_NO; -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (!process_record_dynamic_macro(keycode, record)) { - return false; - } - uint8_t layer; - layer = biton32(layer_state); - - switch (keycode) { - case FPH_1 ... FPH_9: - if(layer == _FPHNOISY){ - if (record->event.pressed) { - if(fph_keycode != keycode) { // key change - fph_tap_qty = 0; - fph_keycode = keycode; - } else { // same key tapped again so erase and increment. - register_code(KC_BSPC); - unregister_code(KC_BSPC); - fph_tap_qty++; - } - uint16_t render_keycode = get_render_keycode(keycode, fph_tap_qty); - // find mods? Apply mods.. - register_code(render_keycode); - unregister_code(render_keycode); - } else { - // do we need to do anything on key-release? - } - } else { // not noisy, be demure . - if (record->event.pressed) { - if(fph_keycode != keycode) { // key change, kill everything. - uint16_t render_keycode = get_render_keycode(fph_keycode, fph_tap_qty); - // find mods? Apply mods.. - register_code(render_keycode); - unregister_code(render_keycode); - fph_keycode = keycode; - fph_tap_qty = 0; - } else { // same key tapped again so increment counter silently - fph_tap_qty++; - } - } else { - // do we need to do anything on key-release? - // maybe start a timer on this one? - } - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } - return false; - break; - case MACSLEEP: - if (record->event.pressed) { - register_code(KC_RSFT); - register_code(KC_RCTL); - register_code(KC_POWER); - unregister_code(KC_POWER); - unregister_code(KC_RCTL); - unregister_code(KC_RSFT); - } - return false; - break; - } - return true; -} diff --git a/keyboards/roadkit/keymaps/flipphone/readme.md b/keyboards/roadkit/keymaps/flipphone/readme.md deleted file mode 100644 index ad630be195..0000000000 --- a/keyboards/roadkit/keymaps/flipphone/readme.md +++ /dev/null @@ -1,26 +0,0 @@ -# Flip Phone layout for Roadkit - -BEWARE, THIS DOES NOT WORK YET. - -Uses the numpad with classic cellular phone style letters assigned to the numbers. - -# LAYERS - -* Numpad - The layer that matches the caps mostly -* FPH - Base layer for text -* FPHNOISY - Text layer that outputs every character and then backspaces as they're replaced -* DYN - dynamic macro layer for recording and playing macros - -## FPH - -Poke the "2" key twice and it makes "B". - -## FPHNOISY - -Poke the "2" key twice and it makes "A"+backspace+"B" so you can see it cycle through. - -## MACROS - -May be able to record macros with the T9 layer because the "KC_*"s are only sent -at the end. Trying to do a macro with T9NOISY would probably fill up the buffer -in just a few characters. diff --git a/keyboards/roadkit/keymaps/flipphone/rules.mk b/keyboards/roadkit/keymaps/flipphone/rules.mk deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/roadkit/keymaps/flipphone/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/khord/config.h b/keyboards/roadkit/keymaps/khord/config.h deleted file mode 100644 index da6ed7189c..0000000000 --- a/keyboards/roadkit/keymaps/khord/config.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here -#define TAPPING_TERM 175 - -#ifdef BACKLIGHT_ENABLE - #define BACKLIGHT_PIN B5 - #define BACKLIGHT_LEVELS 3 - #define BACKLIGHT_ON_STATE 0 -#endif - -#endif diff --git a/keyboards/roadkit/keymaps/khord/keymap.c b/keyboards/roadkit/keymaps/khord/keymap.c deleted file mode 100644 index 9111f4f898..0000000000 --- a/keyboards/roadkit/keymaps/khord/keymap.c +++ /dev/null @@ -1,112 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -#define _NP 0 -#define _L1 1 -#define _L2 2 - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -enum custom_keycodes { - NUMPAD = SAFE_RANGE, - ADMIN, - SMSPC1, - STR192, - STR255 -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Numpad - * ,-----------------------. - * | 7 | 8 | 9 |Bksp | - * |-----`-----`-----`-----| - * | 4 | 5 | 6 | Tab | - * |-----`-----`-----`-----| - * | 1 | 2 | 3 |Enter| - * |-----`-----`-----`-----| - * | 0 |Space| . | / | - * `-----`-----`-----`-----' - * | L1 | L2 | | | Layer hold - */ - [_NP] = LAYOUT_ortho_4x4( /* Numpad */ - KC_P7, KC_P8, KC_P9, KC_BSPC, \ - KC_P4, KC_P5, KC_P6, KC_TAB, \ - KC_P1, KC_P2, KC_P3, KC_PENT, \ - LT(1, KC_P0), LT(2, KC_SPC), KC_PDOT, KC_PSLS - ), - - /* L1 - * ,-----------------------. - * |Reset| | | Del | - * |-----`-----`-----`-----| - * | Left| Down| Up |Right| - * |-----`-----`-----`-----| - * | 192.| 255 | | | - * |-----`-----`-----`-----| - * |_____| LED | . | | - * `-----`-----`-----`-----' - */ - [_L1] = LAYOUT_ortho_4x4( /* LAYER 1 */ - RESET, XXXXXXX, XXXXXXX, KC_DEL, \ - KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, \ - STR192, STR255, XXXXXXX, XXXXXXX, \ - _______, BL_STEP, _______, XXXXXXX - ), - - /* L2 - * ,-----------------------. - * | | | str | str | - * |-----`-----`-----`-----| - * | | | | | - * |-----`-----`-----`-----| - * | | | | | - * |-----`-----`-----`-----| - * | |_____| | | - * `-----`-----`-----`-----' - */ - [_L2] = LAYOUT_ortho_4x4( /* LAYER 2 */ - XXXXXXX, XXXXXXX, ADMIN, SMSPC1, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, _______, XXXXXXX, XXXXXXX - ) -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case ADMIN: - if (record->event.pressed) { - SEND_STRING("Administrator"); - } - return false; - break; - case SMSPC1: - if (record->event.pressed) { - SEND_STRING("Simspace1!"); - } - return false; - break; - case STR192: - if (record->event.pressed) { - SEND_STRING("192.168."); - } - return false; - break; - case STR255: - if (record->event.pressed) { - SEND_STRING("255"); - } - return false; - break; - } - return true; -}; diff --git a/keyboards/roadkit/keymaps/khord/rules.mk b/keyboards/roadkit/keymaps/khord/rules.mk deleted file mode 100644 index 9f3c958bd8..0000000000 --- a/keyboards/roadkit/keymaps/khord/rules.mk +++ /dev/null @@ -1,22 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = no # Enable Tap Dance functionality - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/roadkit/keymaps/mjt/config.h b/keyboards/roadkit/keymaps/mjt/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/roadkit/keymaps/mjt/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/mjt/keymap.c b/keyboards/roadkit/keymaps/mjt/keymap.c deleted file mode 100644 index a1af5b1f28..0000000000 --- a/keyboards/roadkit/keymaps/mjt/keymap.c +++ /dev/null @@ -1,239 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -#ifdef BACKLIGHT_ENABLE - #include "backlight.h" -#endif - -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif - -void backlight_toggle(void){ -}; - -enum roadkit_layers { - _NUMPAD, - _NAVIGATION, - _EXCEL, - _ADJUST, - _DYN -}; - -enum minivan_keycodes { - NUMPAD = SAFE_RANGE, - NAVIGATION, - EXCEL, - NUMPAD_LOCK, - NAVIGATION_LOCK, - EXCEL_LOCK, - PARENS, - BRACKETS, - BRACES, - BACKLIT, - MACSLEEP, - DYNAMIC_MACRO_RANGE, -}; - -#include "dynamic_macro.h" - -// Fillers to make keymaps cleaner looking -#define _______ KC_TRNS -#define XXXXXXX KC_NO - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */ - KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ - KC_KP_4, KC_KP_5, KC_KP_6, \ - KC_KP_1, KC_KP_2, KC_KP_3, NAVIGATION, \ - EXCEL, KC_KP_DOT - ), - [_EXCEL] = LAYOUT_numpad_4x4( /* Excel related */ - KC_KP_SLASH, KC_KP_ASTERISK, KC_MINS, KC_TAB, \ - KC_QUOT, KC_KP_EQUAL, PARENS, \ - KC_DQT, BRACKETS, BRACES, _______, \ - _______, MO(_DYN) - ), - [_NAVIGATION] = LAYOUT_numpad_4x4( /* Navigation */ - KC_HOME, _______, KC_PGUP, KC_TAB, \ - KC_END, KC_UP, KC_PGDN, \ - KC_LEFT, KC_DOWN, KC_RIGHT, _______, \ - _______, MO(_DYN) - ), - [_ADJUST] = LAYOUT_numpad_4x4( /* Adjustments */ - KC_NUMLOCK, MACSLEEP, BACKLIT, _______, \ - KC_BSPC, _______, KC_DEL, \ - EXCEL_LOCK, NUMPAD_LOCK, NAVIGATION_LOCK, _______, \ - _______, _______ - ), - [_DYN] = LAYOUT_numpad_4x4( /* DYNAMIC MACRO */ - DYN_REC_START1, DYN_REC_START2, _______, _______, \ - _______, _______, _______, \ - DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \ - _______, _______ - ), -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -#ifdef AUDIO_ENABLE - -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_numpad[][2] = SONG(QWERTY_SOUND); -float tone_excel[][2] = SONG(DVORAK_SOUND); -float tone_navigation[][2] = SONG(COLEMAK_SOUND); -float tone_plover[][2] = SONG(PLOVER_SOUND); -float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); - -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool fn_tap_used = false; // sets to false when space is pressed, - // sets to true when any other key is pressed, - //when space is lifted, if another key was prssed, don't send space. -uint16_t fn_keycode = 0; // stores which spacebar was used, either raise or lower... - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (!process_record_dynamic_macro(keycode, record)) { - return false; - } - - switch (keycode) { - case NAVIGATION: // This key is enter if tapped, navigation if held - if (record->event.pressed) { - fn_keycode = NAVIGATION; // these two lines figure out if the next action is - fn_tap_used = false; - layer_on(_NAVIGATION); - update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); - } else { - layer_off(_NAVIGATION); - update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); - if(!fn_tap_used && fn_keycode == NAVIGATION ){ - register_code(KC_KP_ENTER); - unregister_code(KC_KP_ENTER); - fn_keycode = 0; - fn_tap_used = false; - } - } - return false; - break; - case EXCEL: - if (record->event.pressed) { - fn_keycode = EXCEL; - fn_tap_used = false; - layer_on(_EXCEL); - update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); - } else { - layer_off(_EXCEL); - update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); - if(!fn_tap_used && fn_keycode == EXCEL ){ - register_code(KC_KP_0); - unregister_code(KC_KP_0); - fn_keycode = 0; - fn_tap_used = false; - } - } - return false; - break; - default: - fn_tap_used = true; - break; // don't return because this just handles the spacebars. - } - // this is the normal keycode processing switch from Planck default layout. - switch (keycode) { - case NUMPAD_LOCK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_numpad, false, 0); - #endif - persistant_default_layer_set(1UL<<_NUMPAD); - } - return false; - break; - case NAVIGATION_LOCK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_navigation, false, 0); - #endif - persistant_default_layer_set(1UL<<_NAVIGATION); - } - return false; - break; - case EXCEL_LOCK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_excel, false, 0); - #endif - persistant_default_layer_set(1UL<<_EXCEL); - } - return false; - break; - case PARENS: - if (record->event.pressed) { - register_code(KC_RSFT); - register_code(KC_9); - unregister_code(KC_9); - register_code(KC_0); - unregister_code(KC_0); - register_code(KC_RSFT); - register_code(KC_LEFT); - unregister_code(KC_LEFT); - } - return false; - break; - case BRACKETS: - if (record->event.pressed) { - register_code(KC_LBRC); - unregister_code(KC_LBRC); - register_code(KC_RBRC); - unregister_code(KC_RBRC); - register_code(KC_LEFT); - unregister_code(KC_LEFT); - } - return false; - break; - case BRACES: - if (record->event.pressed) { - register_code(KC_RSFT); - register_code(KC_LBRC); - unregister_code(KC_LBRC); - register_code(KC_RBRC); - unregister_code(KC_RBRC); - unregister_code(KC_RSFT); - register_code(KC_LEFT); - unregister_code(KC_LEFT); - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } - return false; - break; - case MACSLEEP: - if (record->event.pressed) { - register_code(KC_RSFT); - register_code(KC_RCTL); - register_code(KC_POWER); - unregister_code(KC_POWER); - unregister_code(KC_RCTL); - unregister_code(KC_RSFT); - } - return false; - break; - } - return true; -} diff --git a/keyboards/roadkit/keymaps/mjt/readme.md b/keyboards/roadkit/keymaps/mjt/readme.md deleted file mode 100644 index 80c0e5240e..0000000000 --- a/keyboards/roadkit/keymaps/mjt/readme.md +++ /dev/null @@ -1,22 +0,0 @@ -# Mike's custom keymap for roadkit - -Based on the 13 key layout. - -## LAYERS - -* Numpad - The layer that matches the caps -* Excel - / * - = and () [] {} macros -* Navigation - arrow keys and home/end -* ADJUST - just like planck adjust, lets you set default layer. -* DYN - dynamic macro layer for recording and playing macros - -## MACROS - -Sadly, the dynamic macros are probably going worthless because they keys that -they record have to be pressed on this keyboard. This keyboard doesn't have -most letters... - -## LEADER KEYS - -This board would probably be better with the user of leader keys instead of -complex layers with a raise/lower setup... Something to look into for later. diff --git a/keyboards/roadkit/keymaps/mjt/rules.mk b/keyboards/roadkit/keymaps/mjt/rules.mk deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/roadkit/keymaps/mjt/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/singles/config.h b/keyboards/roadkit/keymaps/singles/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/roadkit/keymaps/singles/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/singles/keymap.c b/keyboards/roadkit/keymaps/singles/keymap.c deleted file mode 100644 index 4c246f5136..0000000000 --- a/keyboards/roadkit/keymaps/singles/keymap.c +++ /dev/null @@ -1,61 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define _NP 0 -#define _L1 1 - -// Macro name shortcuts -#define NUMPAD M(_NP) -#define LAYER1 M(_L1) - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NP] = LAYOUT_ortho_4x4( /* Numpad */ - KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ - KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, \ - KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ - KC_KP_0, KC_KP_DOT, TG(_L1), KC_BSPC - ), - [_L1] = LAYOUT_ortho_4x4( /* LAYER 1 */ - KC_NUMLOCK, _______, _______, KC_VOLU, \ - _______, KC_UP, _______, KC_VOLD, \ - KC_LEFT, KC_DOWN, KC_RIGHT, _______, \ - _______, _______, _______, _______ - ) -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _L1: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_L1); - } - break; - case _NP: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_NP); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/roadkit/keymaps/singles/readme.md b/keyboards/roadkit/keymaps/singles/readme.md deleted file mode 100644 index 48ea4a8b35..0000000000 --- a/keyboards/roadkit/keymaps/singles/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# The singles keymap for roadkit - -This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point. diff --git a/keyboards/roadkit/keymaps/singles/rules.mk b/keyboards/roadkit/keymaps/singles/rules.mk deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/roadkit/keymaps/singles/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/singlesBrent/config.h b/keyboards/roadkit/keymaps/singlesBrent/config.h deleted file mode 100644 index 57468e122a..0000000000 --- a/keyboards/roadkit/keymaps/singlesBrent/config.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here -#define TAPPING_TERM 175 - -#ifdef BACKLIGHT_ENABLE - #define BACKLIGHT_PIN B5 - #define BACKLIGHT_LEVELS 3 - #define BACKLIGHT_ON_STATE 0 -#endif - -#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/singlesBrent/keymap.c b/keyboards/roadkit/keymaps/singlesBrent/keymap.c deleted file mode 100644 index b4da80e284..0000000000 --- a/keyboards/roadkit/keymaps/singlesBrent/keymap.c +++ /dev/null @@ -1,242 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define _NP 0 -#define _L1 1 -#define _L2 2 -#define _L3 3 - -// Macro name shortcuts -#define NUMPAD M(_NP) -#define LAYER1 M(_L1) -#define LAYER2 M(_L2) -#define LAYER3 M(_L3) - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -void matrix_init_user(void) { - backlight_level(4); -} - - - -//Tap Dance Declarations - -enum { - - TD_EQUAL_NP = 0, - TD_KP_PLUS_L1, - TD_DOT_L2, - TD_0_L3 - -}; - -//Tap Dance Definitions - - - //TD equal to turn on layer NP -void _td_equal_tg_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code(KC_EQUAL); - } else if (state->count == 2) { - backlight_set(3); - layer_on(_NP); - layer_off(_L1); - layer_off(_L2); - layer_off(_L3); - } -} - -void _td_equal_tg_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code(KC_EQUAL); - } -} - - - //TD kp plus to toggle layer 1 -void _td_kp_plus_tg_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code(KC_KP_PLUS); - } else if (state->count == 2) { -// layer_invert(_L1); - backlight_set(2); - layer_on(_L1); - layer_off(_L2); - layer_off(_L3); - } -} - -void _td_kp_plus_tg_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code(KC_KP_PLUS); - } -} - - - //TD dot to toggle layer 2 -void _td_dot_tg_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code(KC_DOT); - } else if (state->count == 2) { - backlight_set(1); - layer_on(_L2); - layer_off(_L1); - layer_off(_L3); - } -} - -void _td_dot_tg_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code(KC_DOT); - } -} - - //TD 0 to toggle layer 3 -void _td_0_tg_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code(KC_0); - } else if (state->count == 2) { - backlight_set(0); - layer_on(_L3); - layer_off(_L1); - layer_off(_L2); - } -} - -void _td_0_tg_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code(KC_0); - } -} - -//TD Actions -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_EQUAL_NP] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_equal_tg_finished, _td_equal_tg_reset), - [TD_KP_PLUS_L1] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_kp_plus_tg_finished, _td_kp_plus_tg_reset), - [TD_DOT_L2] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_dot_tg_finished, _td_dot_tg_reset), - [TD_0_L3] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_0_tg_finished, _td_0_tg_reset) -}; - - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Numberpad - * ,-----------------------. - * | 7 | 8 | 9 | / | - * |-----`-----`-----`-----| - * | 4 | 5 | 6 | * | - * |-----`-----`-----`-----| - * | 1 | 2 | 3 | - | - * |-----`-----`-----`-----| - * | 0 | . | + | = | - * `-----`-----`-----`-----' - * Tapdances: - * | L3 | L2 | L1 | NP | - * `-----`-----`-----`-----' - */ - [_NP] = LAYOUT_ortho_4x4( /* Numpad */ - KC_7, KC_8, KC_9, KC_SLASH, \ - KC_4, KC_5, KC_6, KC_KP_ASTERISK, \ - KC_1, KC_2, KC_3, KC_MINUS, \ - TD(TD_0_L3), TD(TD_DOT_L2), TD(TD_KP_PLUS_L1), TD(TD_EQUAL_NP) - ), - - /* L1 - * ,-----------------------. - * | Esc |Bksp |Home |PgUp | - * |-----`-----`-----`-----| - * | Tab | Up | End |PgDn | - * |-----`-----`-----`-----| - * |Left |Down |Right|Enter| - * |-----`-----`-----`-----| - * | 0 | . | + | = | - * `-----`-----`-----`-----' - */ - [_L1] = LAYOUT_ortho_4x4( /* LAYER 1 */ - KC_ESCAPE, KC_BSPACE, KC_HOME, KC_PGUP, \ - KC_TAB, KC_UP, KC_END, KC_PGDOWN, \ - KC_LEFT, KC_DOWN, KC_RIGHT, KC_KP_ENTER, \ - _______, _______, _______, _______ - ), - - /* L2 - * ,-----------------------. - * |Sleep|LClik|RClik|VolUp| - * |-----`-----`-----`-----| - * |AltF4| F11 |WinTb|VolDn| - * |-----`-----`-----`-----| - * |PrvTk|Play |NxtTk|Mute | - * |-----`-----`-----`-----| - * | 0 | . | + | = | - * `-----`-----`-----`-----' - */ - [_L2] = LAYOUT_ortho_4x4( /* LAYER 2 */ - KC_SYSTEM_SLEEP, KC_MS_BTN1, KC_MS_BTN2, KC_AUDIO_VOL_UP, \ - LALT(KC_F4), KC_F11, LGUI(KC_TAB), KC_AUDIO_VOL_DOWN, \ - KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, \ - _______, _______, _______, _______ - ), - - /* L3 needs cut, copy, paste, undo, again (redo), find, calc, www back, www forward, F5 - * ,-----------------------. - * |WBack|WHome|WFor | F5 | - * |-----`-----`-----`-----| - * |Calc |Undo |Redo |WSrch| - * |-----`-----`-----`-----| - * | Cut |Copy |Paste|Find | - * |-----`-----`-----`-----| - * | 0 | . | + | = | - * `-----`-----`-----`-----' - */ - [_L3] = LAYOUT_ortho_4x4( /* LAYER 3 */ - KC_SYSTEM_SLEEP, KC_MS_BTN1, KC_MS_BTN2, KC_AUDIO_VOL_UP, \ - LALT(KC_F4), KC_F11, LGUI(KC_TAB), KC_AUDIO_VOL_DOWN, \ - KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, \ - _______, _______, _______, _______ - ), -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t * action_get_macro(keyrecord_t * record, uint8_t id, uint8_t opt) { - switch (id) { - case _L3: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_L3); - } - break; - case _L2: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_L2); - } - break; - case _L1: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_L1); - } - break; - case _NP: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_NP); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/roadkit/keymaps/singlesBrent/readme.md b/keyboards/roadkit/keymaps/singlesBrent/readme.md deleted file mode 100644 index 48ea4a8b35..0000000000 --- a/keyboards/roadkit/keymaps/singlesBrent/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# The singles keymap for roadkit - -This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point. diff --git a/keyboards/roadkit/keymaps/singlesBrent/rules.mk b/keyboards/roadkit/keymaps/singlesBrent/rules.mk deleted file mode 100644 index b61d6cca2c..0000000000 --- a/keyboards/roadkit/keymaps/singlesBrent/rules.mk +++ /dev/null @@ -1,22 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = yes # Enable Tap Dance functionality - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file |