diff options
Diffstat (limited to 'keyboards/ploopyco/adns5050.c')
| -rw-r--r-- | keyboards/ploopyco/adns5050.c | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/keyboards/ploopyco/adns5050.c b/keyboards/ploopyco/adns5050.c new file mode 100644 index 0000000000..fcf2f213e4 --- /dev/null +++ b/keyboards/ploopyco/adns5050.c @@ -0,0 +1,197 @@ +/* Copyright 2021 Colin Lam (Ploopy Corporation) + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> + * Copyright 2019 Sunjun Kim + * Copyright 2019 Hiroyuki Okada + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include "adns5050.h" +#include "quantum.h" +#include "wait.h" + +#ifdef CONSOLE_ENABLE +# include "print.h" +#endif + +#ifndef OPTIC_ROTATED +# define OPTIC_ROTATED false +#endif + +// Definitions for the ADNS serial line. +// These really ought to be defined in your config.h, but defaults are +// here if you're really lazy. +#ifndef ADNS_SCLK_PIN +# define ADNS_SCLK_PIN B7 +#endif + +#ifndef ADNS_SDIO_PIN +# define ADNS_SDIO_PIN C6 +#endif + +#ifndef ADNS_CS_PIN +# define ADNS_CS_PIN B4 +#endif + +#ifdef CONSOLE_ENABLE +void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); } +#endif + +// Initialize the ADNS serial pins. +void adns_init(void) { + setPinOutput(ADNS_SCLK_PIN); + setPinOutput(ADNS_SDIO_PIN); + setPinOutput(ADNS_CS_PIN); +} + +// Perform a synchronization with the ADNS. +// Just as with the serial protocol, this is used by the slave to send a +// synchronization signal to the master. +void adns_sync(void) { + writePinLow(ADNS_CS_PIN); + wait_us(1); + writePinHigh(ADNS_CS_PIN); +} + +void adns_cs_select(void) { + writePinLow(ADNS_CS_PIN); +} + +void adns_cs_deselect(void) { + writePinHigh(ADNS_CS_PIN); +} + +uint8_t adns_serial_read(void) { + setPinInput(ADNS_SDIO_PIN); + uint8_t byte = 0; + + for (uint8_t i = 0; i < 8; ++i) { + writePinLow(ADNS_SCLK_PIN); + wait_us(1); + + byte = (byte << 1) | readPin(ADNS_SDIO_PIN); + + writePinHigh(ADNS_SCLK_PIN); + wait_us(1); + } + + return byte; +} + +void adns_serial_write(uint8_t data) { + setPinOutput(ADNS_SDIO_PIN); + + for (int8_t b = 7; b >= 0; b--) { + writePinLow(ADNS_SCLK_PIN); + + if (data & (1 << b)) + writePinHigh(ADNS_SDIO_PIN); + else + writePinLow(ADNS_SDIO_PIN); + + wait_us(2); + + writePinHigh(ADNS_SCLK_PIN); + } + + // tSWR. See page 15 of the ADNS spec sheet. + // Technically, this is only necessary if the next operation is an SDIO + // read. This is not guaranteed to be the case, but we're being lazy. + wait_us(4); + + // Note that tSWW is never necessary. All write operations require at + // least 32us, which exceeds tSWW, so there's never a need to wait for it. +} + +// Read a byte of data from a register on the ADNS. +// Don't forget to use the register map (as defined in the header file). +uint8_t adns_read_reg(uint8_t reg_addr) { + adns_cs_select(); + + adns_serial_write(reg_addr); + + // We don't need a minimum tSRAD here. That's because a 4ms wait time is + // already included in adns_serial_write(), so we're good. + // See page 10 and 15 of the ADNS spec sheet. + //wait_us(4); + + uint8_t byte = adns_serial_read(); + + // tSRW & tSRR. See page 15 of the ADNS spec sheet. + // Technically, this is only necessary if the next operation is an SDIO + // read or write. This is not guaranteed to be the case. + // Honestly, this wait could probably be removed. + wait_us(1); + + adns_cs_deselect(); + + return byte; +} + +void adns_write_reg(uint8_t reg_addr, uint8_t data) { + adns_cs_select(); + adns_serial_write(reg_addr); + adns_serial_write(data); + adns_cs_deselect(); +} + +report_adns_t adns_read_burst(void) { + adns_cs_select(); + + report_adns_t data; + data.dx = 0; + data.dy = 0; + + adns_serial_write(REG_MOTION_BURST); + + // We don't need a minimum tSRAD here. That's because a 4ms wait time is + // already included in adns_serial_write(), so we're good. + // See page 10 and 15 of the ADNS spec sheet. + //wait_us(4); + + uint8_t x = adns_serial_read(); + uint8_t y = adns_serial_read(); + + // Burst mode returns a bunch of other shit that we don't really need. + // Setting CS to high ends burst mode early. + adns_cs_deselect(); + + data.dx = convert_twoscomp(x); + data.dy = convert_twoscomp(y); + + return data; +} + +// Convert a two's complement byte from an unsigned data type into a signed +// data type. +int8_t convert_twoscomp(uint8_t data) { + if ((data & 0x80) == 0x80) + return -128 + (data & 0x7F); + else + return data; +} + +// Don't forget to use the definitions for CPI in the header file. +void adns_set_cpi(uint8_t cpi) { + adns_write_reg(REG_MOUSE_CONTROL2, cpi); +} + +bool adns_check_signature(void) { + uint8_t pid = adns_read_reg(REG_PRODUCT_ID); + uint8_t rid = adns_read_reg(REG_REVISION_ID); + uint8_t pid2 = adns_read_reg(REG_PRODUCT_ID2); + + return (pid == 0x12 && rid == 0x01 && pid2 == 0x26); +} |