1 files changed, 0 insertions, 125 deletions
diff --git a/keyboards/planck/rev6/config.h b/keyboards/planck/rev6/config.h
deleted file mode 100644
index bae075de10..0000000000
--- a/keyboards/planck/rev6/config.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef REV6_CONFIG_H
-#define REV6_CONFIG_H
-
-/* USB Device descriptor parameter */
-#define PRODUCT_ID 0xA4F9
-#define DEVICE_VER 0x0006
-
-#undef MATRIX_ROWS
-#undef MATRIX_COLS
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-/* Note: These are not used for arm boards. They're here purely as documentation. */
-#undef MATRIX_ROW_PINS
-#undef MATRIX_COL_PINS
-
-#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2 }
-#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
-
-#define UNUSED_PINS
-
-#define ENCODERS_PAD_A { B12 }
-#define ENCODERS_PAD_B { B13 }
-
-#define DIP_SWITCH_PINS { B14, A15, A0, B9 }
-
-#define MUSIC_MAP
-#undef AUDIO_VOICES
-#undef AUDIO_PIN
-#define AUDIO_PIN A5
-#define AUDIO_PIN_ALT A4
-#define AUDIO_PIN_ALT_AS_NEGATIVE
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-// #define DEBOUNCE 6
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-
-/*
- * WS2812 Underglow Matrix options
- */
-#define RGB_DI_PIN A1
-#define RGBLED_NUM 9
-#define DRIVER_LED_TOTAL RGBLED_NUM
-
-#define WS2812_PWM_DRIVER PWMD2
-#define WS2812_PWM_CHANNEL 2
-#define WS2812_PWM_PAL_MODE 1
-#define WS2812_DMA_STREAM STM32_DMA1_STREAM2
-#define WS2812_DMA_CHANNEL 2
-
-#define RGB_DISABLE_WHEN_USB_SUSPENDED
-
-#endif