diff options
Diffstat (limited to 'keyboards/omnikey_blackheart')
| -rw-r--r-- | keyboards/omnikey_blackheart/config.h | 60 | ||||
| -rw-r--r-- | keyboards/omnikey_blackheart/keymaps/default/keymap.c | 48 | ||||
| -rw-r--r-- | keyboards/omnikey_blackheart/omnikey_blackheart.c | 1 | ||||
| -rw-r--r-- | keyboards/omnikey_blackheart/omnikey_blackheart.h | 22 | ||||
| -rw-r--r-- | keyboards/omnikey_blackheart/readme.md | 14 | ||||
| -rw-r--r-- | keyboards/omnikey_blackheart/rules.mk | 56 |
6 files changed, 201 insertions, 0 deletions
diff --git a/keyboards/omnikey_blackheart/config.h b/keyboards/omnikey_blackheart/config.h new file mode 100644 index 0000000000..14b4a5f172 --- /dev/null +++ b/keyboards/omnikey_blackheart/config.h @@ -0,0 +1,60 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER blindassassin111 +#define PRODUCT Omnikey Blackheart PCB +#define DESCRIPTION Teensy++ Board for Omnikey keyboards + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 23 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3, D4 } +#define MATRIX_COL_PINS { C2, C3, C4, C7, C1, C0, E1, E0, D7, F7, F6, F5, F4, F3, F2, F1, F0, E6, E7, B0, B1, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 0 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* force n-key rollover*/ +#define FORCE_NKRO + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif
\ No newline at end of file diff --git a/keyboards/omnikey_blackheart/keymaps/default/keymap.c b/keyboards/omnikey_blackheart/keymaps/default/keymap.c new file mode 100644 index 0000000000..9dff862e87 --- /dev/null +++ b/keyboards/omnikey_blackheart/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +#include "omnikey_blackheart.h" + +// Fillers to make layering more clear +#define ______ KC_TRNS +#define XXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = KEYMAP(\ + KC_F11 , KC_F12 , KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_PSCR , KC_SLCK , KC_PAUS , + KC_F1 , KC_F2 , KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS , KC_EQL , KC_BSPC , KC_INS , KC_HOME , KC_PGUP , KC_NLCK , KC_PSLS, KC_PAST, KC_PMNS, + KC_F3 , KC_F4 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC , KC_RBRC , KC_BSLS , KC_DEL , KC_END , KC_PGDN , KC_P7 , KC_P8 , KC_P9 , KC_PPLS, + KC_F5 , KC_F6 , KC_CAPS , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_QUOT , KC_ENT , XXXXXX , XXXXXX , XXXXXX , KC_P4 , KC_P5 , KC_P6 , KC_EQL, + KC_F7 , KC_F8 , KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_RSFT , MO(1) , XXXXXX , KC_UP , XXXXXX , KC_P1 , KC_P2 , KC_P3 , KC_PENT, + KC_F9 , KC_F10 , KC_LCTL , KC_LGUI , KC_LALT , XXXXXX , KC_SPC , KC_RALT , KC_RGUI , KC_RCTL , XXXXXX , KC_LEFT , KC_DOWN , KC_RIGHT, KC_P0 , KC_PDOT + ), + + [1] = KEYMAP(\ + KC_F11 , KC_F12 , KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_PSCR , KC_SLCK , KC_PAUS , + KC_F1 , KC_F2 , RESET , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS , KC_EQL , KC_BSPC , KC_INS , KC_HOME , KC_PGUP , KC_NLCK , KC_PSLS, KC_PAST, KC_PMNS, + KC_F3 , KC_F4 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC , KC_RBRC , KC_BSLS , KC_DEL , KC_END , KC_PGDN , KC_P7 , KC_P8 , KC_P9 , KC_PPLS, + KC_F5 , KC_F6 , KC_CAPS , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_QUOT , KC_ENT , XXXXXX , XXXXXX , XXXXXX , KC_P4 , KC_P5 , KC_P6 , KC_EQL, + KC_F7 , KC_F8 , KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_RSFT , ______ , XXXXXX , KC_UP , XXXXXX , KC_P1 , KC_P2 , KC_P3 , KC_PENT, + KC_F9 , KC_F10 , KC_LCTL , KC_LGUI , KC_LALT , XXXXXX , KC_SPC , KC_RALT , KC_RGUI , KC_RCTL , XXXXXX , KC_LEFT , KC_DOWN , KC_RIGHT, KC_P0 , KC_PDOT + ), +}; + +void led_set_kb(uint8_t usb_led) { + DDRB |= (1 << 4) | (1 << 5) | (1 << 6); + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + PORTB |= (1 << 4); + } else { + PORTB &= ~(1 << 4); + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + PORTB |= (1 << 5); + } else { + PORTB &= ~(1 << 5); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + PORTB |= (1 << 6); + } else { + PORTB &= ~(1 << 6); + } +}
\ No newline at end of file diff --git a/keyboards/omnikey_blackheart/omnikey_blackheart.c b/keyboards/omnikey_blackheart/omnikey_blackheart.c new file mode 100644 index 0000000000..e54047fa68 --- /dev/null +++ b/keyboards/omnikey_blackheart/omnikey_blackheart.c @@ -0,0 +1 @@ +#include "omnikey_blackheart.h" diff --git a/keyboards/omnikey_blackheart/omnikey_blackheart.h b/keyboards/omnikey_blackheart/omnikey_blackheart.h new file mode 100644 index 0000000000..e0baa7f63a --- /dev/null +++ b/keyboards/omnikey_blackheart/omnikey_blackheart.h @@ -0,0 +1,22 @@ +#ifndef omnikey_blackheart +#define omnikey_blackheart + +#include "quantum.h" + +#define KEYMAP( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, K121, K122, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, K221, K222, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, K320, K321, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, K420, K421, \ + K500, K501, K502, K503, K504, K505, K507, K512, K513, K514, K515, K516, K517, K518, K519, K520 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, K121, K122 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, K221, K222 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, K320, K321, KC_NO }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, K420, K421, KC_NO }, \ + { K500, K501, K502, K503, K504, K505, KC_NO, K507, KC_NO, KC_NO, KC_NO, KC_NO, K512, K513, K514, K515, K516, K517, K518, K519, K520, KC_NO, KC_NO } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/omnikey_blackheart/readme.md b/keyboards/omnikey_blackheart/readme.md new file mode 100644 index 0000000000..b318f3e371 --- /dev/null +++ b/keyboards/omnikey_blackheart/readme.md @@ -0,0 +1,14 @@ +Omnikey Blackheart PCB +=== + +A replacement PCB for Omnikey keyboards. Supports 101, 102, Plus, Ultra T, Ultra, Prime and Stellar, as well as customs. + +Keyboard Maintainer: QMK Community and blindassassin111 +Hardware Supported: Omnikey blackheart PCB +Hardware Availability: https://deskthority.net/group-buys-f50/omnikey-replacement-pcb-t18276.html + +Make example for this keyboard (after setting up your build environment): + + make omnikey_blackheart:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/omnikey_blackheart/rules.mk b/keyboards/omnikey_blackheart/rules.mk new file mode 100644 index 0000000000..3d4422e986 --- /dev/null +++ b/keyboards/omnikey_blackheart/rules.mk @@ -0,0 +1,56 @@ +# MCU name +MCU = at90usb1286 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= no
\ No newline at end of file |