diff options
Diffstat (limited to 'keyboards/mxss/mxss.c')
| -rw-r--r-- | keyboards/mxss/mxss.c | 213 |
1 files changed, 0 insertions, 213 deletions
diff --git a/keyboards/mxss/mxss.c b/keyboards/mxss/mxss.c deleted file mode 100644 index 42ecdbc469..0000000000 --- a/keyboards/mxss/mxss.c +++ /dev/null @@ -1,213 +0,0 @@ -/* Copyright 2018 Jumail Mundekkat / MxBlue - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include QMK_KEYBOARD_H -#include "tmk_core/common/eeprom.h" -#include "tmk_core/common/action_layer.h" -#include "rgblight.h" - -// Variables for controlling front LED application -uint8_t fled_mode; // Mode for front LEDs -uint8_t fled_val; // Brightness for front leds (0 - 255) -LED_TYPE fleds[2]; // Front LED rgb values for indicator mode use - -// Predefined colors for layers -// Format: {hue, saturation} -// {0, 0} to turn off the LED -// Add additional rows to handle more layers -__attribute__ ((weak)) -const hs_set layer_colors[] = { - [0] = {0, 0}, // Color for Layer 0 - [1] = {86, 255}, // Color for Layer 1 - [2] = {36, 255}, // Color for Layer 2 - [3] = {185, 255}, // Color for Layer 3 -}; - -__attribute__ ((weak)) -const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t); - -void matrix_init_kb(void) { - // If EEPROM config exists, load it - if (eeprom_is_valid()) { - fled_config fled_conf; - fled_conf.raw = eeprom_read_byte(EEPROM_FRONTLED_ADDR); - fled_mode = fled_conf.mode; - fled_val = fled_conf.val * FLED_VAL_STEP; - // Else, default config - } else { - fled_mode = FLED_RGB; - fled_val = 10 * FLED_VAL_STEP; - eeprom_update_conf(); // Store default config to EEPROM - } - - // Set default values for leds - setrgb(0, 0, 0, &fleds[0]); - setrgb(0, 0, 0, &fleds[1]); - - // Handle lighting for indicator mode - if (fled_mode == FLED_INDI) { - // Enable capslock led if enabled on host - if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) - sethsv(FLED_CAPS_H, FLED_CAPS_S, fled_val, &fleds[0]); - - // Determine and set colour of layer LED according to current layer - // if hue = sat = 0, leave LED off - uint8_t layer = biton32(layer_state); - if (layer < lc_size && !(layer_colors[layer].hue == 0 && layer_colors[layer].hue == 0)) - sethsv(layer_colors[layer].hue, layer_colors[layer].sat, fled_val, &fleds[1]); - } - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // Handle custom keycodes for front LED operation - switch (keycode) { - case FLED_MOD: // Change between front LED operation modes (off, indicator, RGB) - if (record->event.pressed) - fled_mode_cycle(); - break; - - case FLED_VAI: // Increase the brightness of the front LEDs by FLED_VAL_STEP - if (record->event.pressed) - fled_val_increase(); - break; - - case FLED_VAD: // Decrease the brightness of the front LEDs by FLED_VAL_STEP - if (record->event.pressed) - fled_val_decrease(); - break; - - default: - break; // Process all other keycodes normally - } - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // Set indicator LED appropriately, whether it is used or not - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - sethsv(FLED_CAPS_H, FLED_CAPS_S, fled_val, &fleds[0]); - } else { - setrgb(0, 0, 0, &fleds[0]); - } - - rgblight_set(); - led_set_user(usb_led); -} - -uint32_t layer_state_set_kb(uint32_t state) { - // Determine and set colour of layer LED according to current layer - // if hue = sat = 0, leave LED off - uint8_t layer = biton32(state); - - if (layer < lc_size && !(layer_colors[layer].hue == 0 && layer_colors[layer].hue == 0)) - sethsv(layer_colors[layer].hue, layer_colors[layer].sat, fled_val, &fleds[1]); - else - setrgb(0, 0, 0, &fleds[1]); - - return state; -} - -// EEPROM Management - -// Test if magic value is present at expected location -bool eeprom_is_valid(void) -{ - return (eeprom_read_word(EEPROM_MAGIC_ADDR) == EEPROM_MAGIC); -} - -// Set magic value at expected location -void eeprom_set_valid(bool valid) -{ - eeprom_update_word(EEPROM_MAGIC_ADDR, valid ? EEPROM_MAGIC : 0xFFFF); -} - -// Store current front led config in EEPROM -void eeprom_update_conf(void) -{ - // Create storage struct and set values - fled_config conf; - conf.mode = fled_mode; - - // Small hack to ensure max value is stored correctly - if (fled_val == 255) - conf.val = 256 / FLED_VAL_STEP; - else - conf.val = fled_val / FLED_VAL_STEP; - - // Set magic value and store config - eeprom_set_valid(true); - eeprom_update_byte(EEPROM_FRONTLED_ADDR, conf.raw); -} - -// Custom keycode functions - -void fled_mode_cycle(void) -{ - // FLED -> FLED_RGB -> FLED_INDI - switch (fled_mode) { - case FLED_OFF: - fled_mode = FLED_RGB; - break; - - case FLED_RGB: - fled_mode = FLED_INDI; - break; - - case FLED_INDI: - fled_mode = FLED_OFF; - break; - } - - // Update stored config - eeprom_update_conf(); - rgblight_set(); -} - -void fled_val_increase(void) -{ - // Increase val by FLED_VAL_STEP, handling the upper edge case - if (fled_val + FLED_VAL_STEP > 255) - fled_val = 255; - else - fled_val += FLED_VAL_STEP; - - // Update stored config - eeprom_update_conf(); - rgblight_set(); -} - -void fled_val_decrease(void) -{ - // Decrease val by FLED_VAL_STEP, handling the lower edge case - if (fled_val - FLED_VAL_STEP > 255) - fled_val = 255; - else - fled_val -= FLED_VAL_STEP; - - // Update stored config - eeprom_update_conf(); - rgblight_set(); -} |