diff options
Diffstat (limited to 'keyboards/momoka_ergo')
| -rw-r--r-- | keyboards/momoka_ergo/config.h | 131 | ||||
| -rw-r--r-- | keyboards/momoka_ergo/info.json | 82 | ||||
| -rw-r--r-- | keyboards/momoka_ergo/keymaps/default/keymap.c | 55 | ||||
| -rw-r--r-- | keyboards/momoka_ergo/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/momoka_ergo/momoka_ergo.c | 17 | ||||
| -rw-r--r-- | keyboards/momoka_ergo/momoka_ergo.h | 53 | ||||
| -rw-r--r-- | keyboards/momoka_ergo/readme.md | 29 | ||||
| -rw-r--r-- | keyboards/momoka_ergo/rules.mk | 23 |
8 files changed, 391 insertions, 0 deletions
diff --git a/keyboards/momoka_ergo/config.h b/keyboards/momoka_ergo/config.h new file mode 100644 index 0000000000..3c22e3fc84 --- /dev/null +++ b/keyboards/momoka_ergo/config.h @@ -0,0 +1,131 @@ +/* +Copyright 2021 StefanGrindelwald + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER StefanGrindelwald +#define PRODUCT Momoka Ergo + +/* key matrix size */ +#define MATRIX_ROWS 14 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7 } +#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW +#define SELECT_SOFT_SERIAL_SPEED 5 +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D1 // or D1, D2, D3, E6 + +#define RGB_DI_PIN C7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 22 +#define RGBLED_SPLIT { 11, 11 } +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 +#define BOOTMAGIC_KEY_SALT KC_RSFT||KC_LSFT +#define BOOTMAGIC_KEY_SKIP KC_ESC +#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_NO +#define OOTMAGIC_KEY_BOOTLOADER KC_RCTL||KC_LCTL +#define BOOTMAGIC_KEY_EE_HANDS_LEFT KC_T +#define BOOTMAGIC_KEY_EE_HANDS_RIGHT KC_Y +#define USE_SERIAL +#define SPLIT_USB_DETECT +#define EE_HANDS diff --git a/keyboards/momoka_ergo/info.json b/keyboards/momoka_ergo/info.json new file mode 100644 index 0000000000..ecbae947b0 --- /dev/null +++ b/keyboards/momoka_ergo/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "MOMOKA_ERGO", + "url": "", + "maintainer": "StefanGrindelwald", + "width": 19.5, + "height": 9.375, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"L02", "x":3.5, "y":0}, + {"label":"R03", "x":15, "y":0}, + {"label":"L03", "x":2.5, "y":0.125}, + {"label":"L01", "x":4.5, "y":0.125}, + {"label":"R04", "x":14, "y":0.125}, + {"label":"R02", "x":16, "y":0.125}, + {"label":"L00", "x":5.5, "y":0.25}, + {"label":"R05", "x":13, "y":0.25}, + {"label":"L05", "x":0, "y":0.375, "w":1.5}, + {"label":"L04", "x":1.5, "y":0.375}, + {"label":"R01", "x":17, "y":0.375}, + {"label":"R00", "x":18, "y":0.375, "w":1.5}, + {"label":"L12", "x":3.5, "y":1}, + {"label":"R13", "x":15, "y":1}, + {"label":"L13", "x":2.5, "y":1.125}, + {"label":"L11", "x":4.5, "y":1.125}, + {"label":"R14", "x":14, "y":1.125}, + {"label":"R12", "x":16, "y":1.125}, + {"label":"L10", "x":5.5, "y":1.25}, + {"label":"R15", "x":13, "y":1.25}, + {"label":"L15", "x":0, "y":1.375, "w":1.5}, + {"label":"L14", "x":1.5, "y":1.375}, + {"label":"R11", "x":17, "y":1.375}, + {"label":"R10", "x":18, "y":1.375, "w":1.5}, + {"label":"L22", "x":3.5, "y":2}, + {"label":"R23", "x":15, "y":2}, + {"label":"L23", "x":2.5, "y":2.125}, + {"label":"L21", "x":4.5, "y":2.125}, + {"label":"R24", "x":14, "y":2.125}, + {"label":"R22", "x":16, "y":2.125}, + {"label":"L20", "x":5.5, "y":2.25}, + {"label":"R25", "x":13, "y":2.25}, + {"label":"L25", "x":0, "y":2.375, "w":1.5}, + {"label":"L24", "x":1.5, "y":2.375}, + {"label":"R21", "x":17, "y":2.375}, + {"label":"R20", "x":18, "y":2.375, "w":1.5}, + {"label":"L32", "x":3.5, "y":3}, + {"label":"R33", "x":15, "y":3}, + {"label":"L33", "x":2.5, "y":3.125}, + {"label":"L31", "x":4.5, "y":3.125}, + {"label":"R34", "x":14, "y":3.125}, + {"label":"R32", "x":16, "y":3.125}, + {"label":"L30", "x":5.5, "y":3.25}, + {"label":"R35", "x":13, "y":3.25}, + {"label":"L35", "x":0, "y":3.375, "w":1.5}, + {"label":"L34", "x":1.5, "y":3.375}, + {"label":"R31", "x":17, "y":3.375}, + {"label":"R30", "x":18, "y":3.375, "w":1.5}, + {"label":"L42", "x":3.5, "y":4}, + {"label":"R43", "x":15, "y":4}, + {"label":"L43", "x":2.5, "y":4.125}, + {"label":"L41", "x":4.5, "y":4.125}, + {"label":"R44", "x":14, "y":4.125}, + {"label":"R42", "x":16, "y":4.125}, + {"label":"L45", "x":0.5, "y":4.375}, + {"label":"L44", "x":1.5, "y":4.375}, + {"label":"R41", "x":17, "y":4.375}, + {"label":"R40", "x":18, "y":4.375}, + {"label":"L51", "x":1, "y":4.375}, + {"label":"L40", "x":2, "y":4.375}, + {"label":"L52", "x":0, "y":5.375, "h":2}, + {"label":"L61", "x":1, "y":5.375, "h":2}, + {"label":"L50", "x":2, "y":5.375}, + {"label":"L60", "x":2, "y":6.375}, + {"label":"R45", "x":-3.0, "y":6.375}, + {"label":"R54", "x":-2, "y":6.375}, + {"label":"R55", "x":-3.0, "y":7.375}, + {"label":"R64", "x":-2, "y":7.375, "h":2}, + {"label":"R53", "x":-1.0, "y":7.375, "h":2}, + {"label":"R65", "x":-3.0, "y":8.375}] + } + } +} diff --git a/keyboards/momoka_ergo/keymaps/default/keymap.c b/keyboards/momoka_ergo/keymaps/default/keymap.c new file mode 100644 index 0000000000..ca1131ba2f --- /dev/null +++ b/keyboards/momoka_ergo/keymaps/default/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2021 StefanGrindelwald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + MO(_FN1), KC_GRV, KC_EQL, KC_LEFT, KC_RGHT, KC_LALT, KC_RGUI, KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, MO(_FN1), + KC_BSPC, KC_LCTL, KC_HOME, KC_PGUP, KC_RCTL, KC_SPC, + KC_DEL, KC_END, KC_PGDN, KC_ENT + ), + [_FN1] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + MO(_FN2), _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_MOD, RGB_TOG, MO(_FN2), + _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, RGB_VAI, RGB_VAD, RGB_SAI, RGB_SAD, _______, + _______, _______, _______, RGB_HUI, _______, _______, + _______, _______, RGB_HUD, _______ + ), + [_FN2] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, RESET, _______, _______, _______, _______, RESET, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_MOD, RGB_TOG, _______, + _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, RGB_VAI, RGB_VAD, RGB_SAI, RGB_SAD, _______, + _______, _______, _______, RGB_HUI, _______, _______, + _______, _______, RGB_HUD, _______ + ) + +}; diff --git a/keyboards/momoka_ergo/keymaps/default/readme.md b/keyboards/momoka_ergo/keymaps/default/readme.md new file mode 100644 index 0000000000..390149d6bb --- /dev/null +++ b/keyboards/momoka_ergo/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for momoka_ergo diff --git a/keyboards/momoka_ergo/momoka_ergo.c b/keyboards/momoka_ergo/momoka_ergo.c new file mode 100644 index 0000000000..8069d7f512 --- /dev/null +++ b/keyboards/momoka_ergo/momoka_ergo.c @@ -0,0 +1,17 @@ +/* Copyright 2021 StefanGrindelwald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "momoka_ergo.h" diff --git a/keyboards/momoka_ergo/momoka_ergo.h b/keyboards/momoka_ergo/momoka_ergo.h new file mode 100644 index 0000000000..93faad4490 --- /dev/null +++ b/keyboards/momoka_ergo/momoka_ergo.h @@ -0,0 +1,53 @@ +/* Copyright 2021 StefanGrindelwald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + L05, L04, L03, L02, L01, L00, R05, R04, R03, R02, R01, R00, \ + L15, L14, L13, L12, L11, L10, R15, R14, R13, R12, R11, R10, \ + L25, L24, L23, L22, L21, L20, R25, R24, R23, R22, R21, R20, \ + L35, L34, L33, L32, L31, L30, R35, R34, R33, R32, R31, R30, \ + L45, L44, L43, L42, L41, L40, R45, R44, R43, R42, R41, R40, \ + L52, L51, L50, R55, R54, R53, \ + L61, L60, R65, R64 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { L40, L41, L42, L43, L44, L45 },\ + { L50, L51, L52, KC_NO,KC_NO,KC_NO },\ + { L60, L61,KC_NO,KC_NO,KC_NO,KC_NO },\ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 }, \ + { R45, R44, R43, R42, R41, R40 },\ + { R55, R54, R53, KC_NO, KC_NO, KC_NO }, \ + { R65, R64, KC_NO, KC_NO, KC_NO, KC_NO } \ + } diff --git a/keyboards/momoka_ergo/readme.md b/keyboards/momoka_ergo/readme.md new file mode 100644 index 0000000000..d0a289abaf --- /dev/null +++ b/keyboards/momoka_ergo/readme.md @@ -0,0 +1,29 @@ +# momoka_ergo + + + +The MOMOKA Ergo is a split keyboard that is based on the Ergodox standard layout. It has 35 keys and 11 RGB backlights on each part. The two parts of the keyboard is connected by a TRRS cable. + +* Keyboard Maintainer: [StefanGrindelwald](https://github.com/StefanGrindelwald) +* Hardware Supported: momoka.co/ergo +* Hardware Availability: momoka.co/ergo + +Bootloader: + +With the default keymap, you can easily use FN+Shift+D to enter the bootloader in left side and FN+shift+K in right side. Or you can just use the microswitch in the PCB. + +Make example for this keyboard (after setting up your build environment): + + make momoka_ergo:default + +Flashing example for this keyboard(Note that you need flash the both side keyboard respectively): + +For the left side: + + make momoka_ergo:default:dfu-split-left + +For the right side: + + make momoka_ergo:default:dfu-split-right + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/momoka_ergo/rules.mk b/keyboards/momoka_ergo/rules.mk new file mode 100644 index 0000000000..402f5b199a --- /dev/null +++ b/keyboards/momoka_ergo/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +SPLIT_KEYBOARD = yes |