diff options
Diffstat (limited to 'keyboards/miuni32')
22 files changed, 0 insertions, 990 deletions
diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h deleted file mode 100644 index d7df83cfec..0000000000 --- a/keyboards/miuni32/config.h +++ /dev/null @@ -1,163 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bigtuna.io -#define PRODUCT Miuni32 -#define DESCRIPTION A custom keyboard for writers - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 11 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F4, D7} -#define MATRIX_COL_PINS { C6, C7, F7, F6, F1, E6, B7, B3, B2, B1, B0} -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#define RGB_DI_PIN D0 // The pin your RGB strip is wired to -#define RGBLED_NUM 17 // Number of LEDs -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#endif diff --git a/keyboards/miuni32/info.json b/keyboards/miuni32/info.json deleted file mode 100644 index fcd161dc04..0000000000 --- a/keyboards/miuni32/info.json +++ /dev/null @@ -1,17 +0,0 @@ -{ - "keyboard_name": "miuni32", - "url": "", - "maintainer": "qmk", - "width": 11, - "height": 3, - "layouts": { - "LAYOUT": { - "key_count": 32, - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "w":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}] - }, - "LAYOUT_ortho_3x11": { - "key_count": 33, - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}] - } - } -} diff --git a/keyboards/miuni32/keymaps/adam-lee/config.h b/keyboards/miuni32/keymaps/adam-lee/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/miuni32/keymaps/adam-lee/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/miuni32/keymaps/adam-lee/keymap.c b/keyboards/miuni32/keymaps/adam-lee/keymap.c deleted file mode 100644 index 754c20f7d3..0000000000 --- a/keyboards/miuni32/keymaps/adam-lee/keymap.c +++ /dev/null @@ -1,119 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Level 0: Default Layer - * ,---------------------------------------------------------------------------------------. - * | Q | W | E | R | T | Y | U | I | O | P | BSP | - * |---------------------------------------------------------------------------------------| - * | A | S | D | F | G | H | J | K | L | ENT |LT(1|,)| - * |---------------------------------------------------------------------------------------| - * |LT(3|Z)| X | C | V | SPC | B | N | M | RSFT |LT(2|.)| - * |---------------------------------------------------------------------------------------| - */ - [0] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, LT(1, KC_COMMA), - LT(3, KC_Z), KC_X, KC_C, KC_V, KC_SPC, KC_B, KC_N, KC_M, KC_RSFT, LT(2, KC_DOT) - ), - /* Level 1: Numbers Layer - * ,---------------------------------------------------------------------------------------. - * | ESC | 7 | 8 | 9 | / | * | . | , | ( | ) | DEL | - * |---------------------------------------------------------------------------------------| - * | TAB | 4 | 5 | 6 | - | + | HOME | UP | END | PGUP | TRNS | - * |---------------------------------------------------------------------------------------| - * | LATL | 1 | 2 | 3 | 0 | LEFT | DOWN | RGHT | PGDN | RSHFT | - * |---------------------------------------------------------------------------------------| - */ - [1] = LAYOUT( - KC_ESC, KC_7, KC_8, KC_9, KC_SLSH, KC_ASTR, KC_DOT, KC_COMM, KC_LPRN, KC_RPRN, KC_DEL, - KC_TAB, KC_4, KC_5, KC_6, KC_MINS, KC_PLUS, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, - KC_LALT, KC_1, KC_2, KC_3, KC_0, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_RSFT - ), - /* Level 2: Symbols Layer - * ,---------------------------------------------------------------------------------------. - * | ! | @ | # | $ | % | ^ | & | * | - | + | = | - * |---------------------------------------------------------------------------------------| - * | { | } | [ | ] | TRNS | TRNS | \ | ; | : | ` | ? | - * |---------------------------------------------------------------------------------------| - * | LSFT | LCTL | L | T | TAB | N | TRNS | TRNS | RCTL | TRNS | - * |---------------------------------------------------------------------------------------| - */ - [2] = LAYOUT( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_MINS, KC_PLUS, KC_EQL, - KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, _______, _______, KC_BSLS, KC_SCLN, KC_COLN, KC_GRV, KC_QUES, - KC_LSFT, KC_LCTL, KC_L, KC_T, KC_TAB, KC_N, _______, _______, KC_RCTL, _______ - ), - /* Level 3: RGB Layer - * ,---------------------------------------------------------------------------------------. - * | RESET | TRNS | TRNS | TRNS | TRNS | F1 | F2 | F3 | F4 | F5 | F6 | - * |---------------------------------------------------------------------------------------| - * |RGB_TOG|RGB_MOD|RGB_HUI|RGB_HUD| NO |RGB_SAI|RGB_SAD|RGB_VAI|RGB_VAD| TRNS | TRNS | - * |---------------------------------------------------------------------------------------| - * | TRNS | TRNS | TRNS | TRNS | F7 | F8 | F9 | F10 | F11 | F12 | - * |---------------------------------------------------------------------------------------| - */ - [3] = LAYOUT( - RESET, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_NO, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, - _______, _______, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 - ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/miuni32/keymaps/adam-lee/readme.md b/keyboards/miuni32/keymaps/adam-lee/readme.md deleted file mode 100644 index 4cff8ef5a3..0000000000 --- a/keyboards/miuni32/keymaps/adam-lee/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for miuni32
\ No newline at end of file diff --git a/keyboards/miuni32/keymaps/adam-lee/rules.mk b/keyboards/miuni32/keymaps/adam-lee/rules.mk deleted file mode 100644 index 3a741d20a7..0000000000 --- a/keyboards/miuni32/keymaps/adam-lee/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/miuni32/keymaps/default/config.h b/keyboards/miuni32/keymaps/default/config.h deleted file mode 100644 index 271f48d001..0000000000 --- a/keyboards/miuni32/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/miuni32/keymaps/default/keymap.c b/keyboards/miuni32/keymaps/default/keymap.c deleted file mode 100644 index 754c20f7d3..0000000000 --- a/keyboards/miuni32/keymaps/default/keymap.c +++ /dev/null @@ -1,119 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Level 0: Default Layer - * ,---------------------------------------------------------------------------------------. - * | Q | W | E | R | T | Y | U | I | O | P | BSP | - * |---------------------------------------------------------------------------------------| - * | A | S | D | F | G | H | J | K | L | ENT |LT(1|,)| - * |---------------------------------------------------------------------------------------| - * |LT(3|Z)| X | C | V | SPC | B | N | M | RSFT |LT(2|.)| - * |---------------------------------------------------------------------------------------| - */ - [0] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, LT(1, KC_COMMA), - LT(3, KC_Z), KC_X, KC_C, KC_V, KC_SPC, KC_B, KC_N, KC_M, KC_RSFT, LT(2, KC_DOT) - ), - /* Level 1: Numbers Layer - * ,---------------------------------------------------------------------------------------. - * | ESC | 7 | 8 | 9 | / | * | . | , | ( | ) | DEL | - * |---------------------------------------------------------------------------------------| - * | TAB | 4 | 5 | 6 | - | + | HOME | UP | END | PGUP | TRNS | - * |---------------------------------------------------------------------------------------| - * | LATL | 1 | 2 | 3 | 0 | LEFT | DOWN | RGHT | PGDN | RSHFT | - * |---------------------------------------------------------------------------------------| - */ - [1] = LAYOUT( - KC_ESC, KC_7, KC_8, KC_9, KC_SLSH, KC_ASTR, KC_DOT, KC_COMM, KC_LPRN, KC_RPRN, KC_DEL, - KC_TAB, KC_4, KC_5, KC_6, KC_MINS, KC_PLUS, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, - KC_LALT, KC_1, KC_2, KC_3, KC_0, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_RSFT - ), - /* Level 2: Symbols Layer - * ,---------------------------------------------------------------------------------------. - * | ! | @ | # | $ | % | ^ | & | * | - | + | = | - * |---------------------------------------------------------------------------------------| - * | { | } | [ | ] | TRNS | TRNS | \ | ; | : | ` | ? | - * |---------------------------------------------------------------------------------------| - * | LSFT | LCTL | L | T | TAB | N | TRNS | TRNS | RCTL | TRNS | - * |---------------------------------------------------------------------------------------| - */ - [2] = LAYOUT( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_MINS, KC_PLUS, KC_EQL, - KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, _______, _______, KC_BSLS, KC_SCLN, KC_COLN, KC_GRV, KC_QUES, - KC_LSFT, KC_LCTL, KC_L, KC_T, KC_TAB, KC_N, _______, _______, KC_RCTL, _______ - ), - /* Level 3: RGB Layer - * ,---------------------------------------------------------------------------------------. - * | RESET | TRNS | TRNS | TRNS | TRNS | F1 | F2 | F3 | F4 | F5 | F6 | - * |---------------------------------------------------------------------------------------| - * |RGB_TOG|RGB_MOD|RGB_HUI|RGB_HUD| NO |RGB_SAI|RGB_SAD|RGB_VAI|RGB_VAD| TRNS | TRNS | - * |---------------------------------------------------------------------------------------| - * | TRNS | TRNS | TRNS | TRNS | F7 | F8 | F9 | F10 | F11 | F12 | - * |---------------------------------------------------------------------------------------| - */ - [3] = LAYOUT( - RESET, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_NO, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, - _______, _______, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 - ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/miuni32/keymaps/default/readme.md b/keyboards/miuni32/keymaps/default/readme.md deleted file mode 100644 index 4cff8ef5a3..0000000000 --- a/keyboards/miuni32/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for miuni32
\ No newline at end of file diff --git a/keyboards/miuni32/keymaps/default/rules.mk b/keyboards/miuni32/keymaps/default/rules.mk deleted file mode 100644 index 3a741d20a7..0000000000 --- a/keyboards/miuni32/keymaps/default/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/miuni32/keymaps/ht_156/config.h b/keyboards/miuni32/keymaps/ht_156/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/miuni32/keymaps/ht_156/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/miuni32/keymaps/ht_156/keymap.c b/keyboards/miuni32/keymaps/ht_156/keymap.c deleted file mode 100644 index 54e4bcf52d..0000000000 --- a/keyboards/miuni32/keymaps/ht_156/keymap.c +++ /dev/null @@ -1,181 +0,0 @@ -#include QMK_KEYBOARD_H - -// Keyboard layer definitions -#define BASE 0 -#define NUMBERS 1 -#define SYMBOLS 2 -#define MEDIA 3 - -// Keyboard macro defintions -#define GIT_ST M(0) -#define GIT_PU M(1) -#define GIT_CM M(2) -#define HM_DIR M(3) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Level 0: Default Layer - * ,---------------------------------------------------------------------------------------. - * | Q | W | E | R | T | Y | U | I | O | P | BSP | - * |---------------------------------------------------------------------------------------| - * | A | S | D | F | G | H | J | K | L | ENT | RSFT | - * |---------------------------------------------------------------------------------------| - * |LT(2|Z)|LT(3|X)| C | V | B | SPC | N | M | , |LT(1|.)| RCTL | - * |---------------------------------------------------------------------------------------| - */ - [BASE] = LAYOUT_ortho_3x11( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, KC_RSFT, - LT(2, KC_Z), LT(3, KC_X), KC_C, KC_V, KC_B, KC_SPC, KC_N, KC_M, KC_COMMA, LT(1, KC_DOT), KC_RCTL - ), - /* Level 1: Numbers Layer - * ,---------------------------------------------------------------------------------------. - * | ESC | 7 | 8 | 9 | / | * | . | , | ( | ) | DEL | - * |---------------------------------------------------------------------------------------| - * | TAB | 4 | 5 | 6 | - | + | HOME | UP | END | INS | PGUP | - * |---------------------------------------------------------------------------------------| - * | LATL | 1 | 2 | 3 | 0 | ENT | LEFT | DOWN | RGHT | !TRNS!| PGDN | - * |---------------------------------------------------------------------------------------| - */ - [NUMBERS] = LAYOUT_ortho_3x11( - KC_ESC, KC_7, KC_8, KC_9, KC_SLSH, KC_ASTR, KC_DOT, KC_COMM, KC_LPRN, KC_RPRN, KC_DEL, - KC_TAB, KC_4, KC_5, KC_6, KC_MINS, KC_PLUS, KC_HOME, KC_UP, KC_END, KC_INSERT, KC_PGUP, - KC_LALT, KC_1, KC_2, KC_3, KC_0, KC_ENT, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PGDN - ), - /* Level 2: Symbols Layer - * ,---------------------------------------------------------------------------------------. - * | ! | @ | # | $ | % | ^ | & | * | _ | = | ? | - * |---------------------------------------------------------------------------------------| - * | RESET | LSFT | ~ | { | } | \ | | | ; | : | ` | " | - * |---------------------------------------------------------------------------------------| - * | !TRNS!| LCTL | TRNS | [ | ] | TAB | < | > | TRNS | RCTL | TRNS | - * |---------------------------------------------------------------------------------------| - */ - [SYMBOLS] = LAYOUT_ortho_3x11( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_UNDS, KC_EQL, KC_QUES, - RESET, KC_LSFT, KC_TILD, KC_LCBR, KC_RCBR, KC_BSLS, KC_PIPE, KC_SCLN, KC_COLN, KC_GRV, KC_DQUO, - _______, KC_LCTL, _______, KC_LBRC, KC_RBRC, KC_TAB, KC_LABK, KC_RABK, _______, KC_RCTL, _______ - ), - /* Level 3: Media Layer - * ,---------------------------------------------------------------------------------------. - * |RGB_TOG|RGB_HUI|RGB_SAI|RGB_VAI| GIT_CM| CALC | WREF | WFAV | MUTE | VOLD | VOLU | - * |---------------------------------------------------------------------------------------| - * |RGB_MOD|RGB_HUD|RGB_SAD|RGB_VAD| GIT_ST| WHOM | WBAK | WFWD | TRNS | STOP | PLAY | - * |---------------------------------------------------------------------------------------| - * | TRNS | !TRNS!| TRNS | HM_DIR| GIT_PU| MYCM | WSTP | WSCH | MSEL | MPRV | MNXT | - * |---------------------------------------------------------------------------------------| - */ - [MEDIA] = LAYOUT_ortho_3x11( - RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, GIT_CM, KC_CALC, KC_WREF, KC_WFAV, KC_MUTE, KC_VOLD, KC_VOLU, - RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, GIT_ST, KC_WHOM, KC_WBAK, KC_WFWD, _______, KC_MSTP, KC_MPLY, - _______, _______, _______, HM_DIR, GIT_PU, KC_MYCM, KC_WSTP, KC_WSCH, KC_MSEL, KC_MPRV, KC_MNXT - ) -}; - -void press_and_release_key(uint8_t code) -{ - register_code(code); - unregister_code(code); -} - -void press_and_release_mod_key(uint8_t mod, uint8_t code) -{ - register_code(mod); - register_code(code); - unregister_code(code); - unregister_code(mod); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) - { - case 0: - if (record->event.pressed) - { - return MACRO(T(G), T(I), T(T), T(SPC), - T(S), T(T), T(A), T(T), T(U), T(S), END); - } - break; - case 1: - if (record->event.pressed) - { - return MACRO(T(G), T(I), T(T), T(SPC), - T(P), T(U), T(L), T(L), END); - } - break; - case 2: - if (record->event.pressed) - { - return MACRO(T(G), T(I), T(T), T(SPC), - T(C), T(O), T(M), T(M), T(I), T(T), END); - } - break; - case 3: - if (record->event.pressed) - { - /*press_and_release_key(KC_C); - press_and_release_key(KC_D); - press_and_release_key(KC_SPC); - press_and_release_mod_key(KC_LSFT, KC_GRV); - press_and_release_key(KC_SLSH); - press_and_release_key(KC_Q); - press_and_release_key(KC_M); - press_and_release_key(KC_K); - press_and_release_mod_key(KC_LSFT, KC_MINS);*/ - return MACRO(I(0), - T(C), T(D), T(SPC), - D(LSFT), T(GRV), U(LSFT), T(SLSH), - T(Q), T(M), T(K), D(LSFT), T(MINS), U(LSFT), - T(F), T(I), T(R), T(M), T(W), T(A), T(R), T(E), T(SLSH), - T(K), T(E), T(Y), T(B), T(O), T(A), T(R), T(D), T(S), T(SLSH), - T(M), T(I), T(U), T(N), T(I), T(3), T(2), T(SLSH), - T(K), T(E), T(Y), T(M), T(A), T(P), T(S), END); - } - } - return MACRO_NONE; -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/miuni32/keymaps/ht_156/readme.md b/keyboards/miuni32/keymaps/ht_156/readme.md deleted file mode 100644 index e46cc6d539..0000000000 --- a/keyboards/miuni32/keymaps/ht_156/readme.md +++ /dev/null @@ -1 +0,0 @@ -# ht_156's keymap for miuni32, using 33 keys diff --git a/keyboards/miuni32/keymaps/ht_156/rules.mk b/keyboards/miuni32/keymaps/ht_156/rules.mk deleted file mode 100644 index 3a741d20a7..0000000000 --- a/keyboards/miuni32/keymaps/ht_156/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/miuni32/keymaps/ki/config.h b/keyboards/miuni32/keymaps/ki/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/miuni32/keymaps/ki/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/miuni32/keymaps/ki/keymap.c b/keyboards/miuni32/keymaps/ki/keymap.c deleted file mode 100644 index 59d2e285cb..0000000000 --- a/keyboards/miuni32/keymaps/ki/keymap.c +++ /dev/null @@ -1,148 +0,0 @@ -#include QMK_KEYBOARD_H - -enum miuni32_layers { - _BEAKL, - _LOWER, - _RAISE, - _UNION -}; - -enum miuni32_keycodes { - BEAKL = SAFE_RANGE, - LOWER, - RAISE -}; - -#define SPC_SHF SFT_T(KC_SPC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Level 0: BEAKL - * ,---------------------------------------------------------------------------------------. - * | J | H | O | U | K | LOWER | G | C | R | F | Z | - * |---------------------------------------------------------------------------------------| - * | Q | I | E | A | Y | RAISE | D | S | T | N | B | - * |---------------------------------------------------------------------------------------| - * | / | , | ' | . | X |SPC\SHF| W | M | L | P | V | - * |---------------------------------------------------------------------------------------| - */ - [_BEAKL] = LAYOUT_ortho_3x11( - KC_J, KC_H, KC_O, KC_U, KC_K, LOWER, KC_G, KC_C, KC_R, KC_F, KC_Z, - KC_Q, KC_I, KC_E, KC_A, KC_Y, RAISE, KC_D, KC_S, KC_T, KC_N, KC_B, - KC_SLSH, KC_COMM, KC_QUOT, KC_DOT, KC_X, SPC_SHF, KC_W, KC_M, KC_L, KC_P, KC_V - ), - /* Lower - * ,---------------------------------------------------------------------------------------. - * | Tab | { | _ | } | & | | Gui | [ | % | ] | Bkspc | - * |---------------------------------------------------------------------------------------| - * | \ | ( | 1 | ) | # | | $ | < | 0 | > | | | - * |---------------------------------------------------------------------------------------| - * | 5 | 4 | 3 | 2 | Ctl | | Alt | 9 | 8 | 7 | 6 | - * |---------------------------------------------------------------------------------------| - */ - [_LOWER] = LAYOUT_ortho_3x11( - KC_TAB, KC_LCBR, KC_UNDS, KC_RBRC, KC_AMPR, _______, KC_RGUI, KC_LBRC, KC_PERC, KC_RBRC, KC_BSPC, - KC_BSLS, KC_LPRN, KC_1, KC_RPRN, KC_HASH, _______, KC_DLR, KC_LT, KC_0, KC_GT, KC_PIPE, - KC_5, KC_4, KC_3, KC_2, KC_LCTL, _______, KC_RALT, KC_9, KC_8, KC_7, KC_6 - ), - /* Raise - * ,---------------------------------------------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | - * |---------------------------------------------------------------------------------------| - * | F11 | F12 | ! | - | + | | = | ; | ) | ` | ? | - * |------------------------------- -------------------------------------------------------| - * | % | $ | # | @ | | | | ( | * | & | ^ | - * |---------------------------------------------------------------------------------------| - */ - [_RAISE] = LAYOUT_ortho_3x11( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, - KC_F11, KC_F12, KC_EXLM, KC_MINS, KC_PLUS, _______, KC_EQL, KC_SCLN, KC_RPRN, KC_GRV, KC_QUES, - KC_PERC, KC_DLR, KC_HASH, KC_AT, _______, _______, _______, KC_LPRN, KC_ASTR, KC_AMPR, KC_CIRC - ), - /* Union - * ,---------------------------------------------------------------------------------------. - * | RESET | | | | | | | | | | Del | - * |---------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * |---------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * |---------------------------------------------------------------------------------------| - */ - [_UNION] = LAYOUT_ortho_3x11( - RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -//planck like tri layer -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case BEAKL: - if (record->event.pressed) { - set_single_persistent_default_layer(_BEAKL); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _UNION); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _UNION); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _UNION); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _UNION); - } - return false; - break; - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/miuni32/keymaps/ki/readme.md b/keyboards/miuni32/keymaps/ki/readme.md deleted file mode 100644 index 7615d1c6ad..0000000000 --- a/keyboards/miuni32/keymaps/ki/readme.md +++ /dev/null @@ -1,4 +0,0 @@ -# A BEAKL9-ish keymap for miuni32 -A major WIP -Using planck like tri layer switching with a single center control column -No mousekey support diff --git a/keyboards/miuni32/keymaps/ki/rules.mk b/keyboards/miuni32/keymaps/ki/rules.mk deleted file mode 100644 index 15d3cfff2c..0000000000 --- a/keyboards/miuni32/keymaps/ki/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/miuni32/miuni32.c b/keyboards/miuni32/miuni32.c deleted file mode 100644 index 1c1983a564..0000000000 --- a/keyboards/miuni32/miuni32.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "miuni32.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/miuni32/miuni32.h b/keyboards/miuni32/miuni32.h deleted file mode 100644 index ff74675450..0000000000 --- a/keyboards/miuni32/miuni32.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef MIUNI32_H -#define MIUNI32_H - -#include "quantum.h" - -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ - K20, K21, K22, K23, K25, K26, K27, K28, K29, K2A \ - ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \ - { K20, K21, K22, K23, KC_NO, K25, K26, K27, K28, K29, K2A } \ -} - -#define LAYOUT_ortho_3x11( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \ - ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A } \ -} - -#define LAYOUT_all LAYOUT_ortho_3x11 - -#endif diff --git a/keyboards/miuni32/readme.md b/keyboards/miuni32/readme.md deleted file mode 100644 index 359424151d..0000000000 --- a/keyboards/miuni32/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -miuni32 -======= - -A compact 30% keyboard. - -Keyboard Maintainer: QMK Community -Hardware Supported: miuni32 PCB -Hardware Availability: https://bigtuna.io - -Make example for this keyboard (after setting up your build environment): - - make miuni32-default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk deleted file mode 100644 index 1092e50d8c..0000000000 --- a/keyboards/miuni32/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 |