diff options
Diffstat (limited to 'keyboards/meira')
34 files changed, 0 insertions, 3213 deletions
diff --git a/keyboards/meira/TWIlib.c b/keyboards/meira/TWIlib.c deleted file mode 100755 index 8e0c974381..0000000000 --- a/keyboards/meira/TWIlib.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * TWIlib.c - * - * Created: 6/01/2014 10:41:33 PM - * Author: Chris Herring - */ - -#include <avr/io.h> -#include <avr/interrupt.h> -#include "TWIlib.h" -#include "util/delay.h" -#include "print.h" - -void TWIInit() -{ - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWIInfo.repStart = 0; - // Set pre-scalers (no pre-scaling) - TWSR = 0; - // Set bit rate - TWBR = ((F_CPU / TWI_FREQ) - 16) / 2; - // Enable TWI and interrupt - TWCR = (1 << TWIE) | (1 << TWEN); -} - -uint8_t isTWIReady() -{ - if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) ) - { - -// xprintf("i2c ready\n"); - return 1; - } - else - { - if(TWIInfo.mode == Initializing){ - switch(TWIInfo.errorCode){ - case TWI_SUCCESS: - break; - case TWI_NO_RELEVANT_INFO: - - break; - case TWI_LOST_ARBIT: - case TWI_MT_DATA_NACK: - // Some kind of I2C error, reset and re-init - xprintf("I2C init error: %d\n", TWIInfo.errorCode); - TWCR = (1 << TWINT)|(1 << TWSTO); - TWIInit(); - break; - default: - xprintf("Other i2c init error: %d\n", TWIInfo.errorCode); - } - } - return 0; - } -} - - -void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking) -{ - // Wait until ready - while (!isTWIReady()) {_delay_us(1);} - // Reset the I2C stuff - TWCR = (1 << TWINT)|(1 << TWSTO); - TWIInit(); - // Set repeated start mode - TWIInfo.repStart = repStart; - // Copy transmit info to global variables - TWITransmitBuffer = (uint8_t *)TXdata; - TXBuffLen = dataLen; - TXBuffIndex = 0; - - // If a repeated start has been sent, then devices are already listening for an address - // and another start does not need to be sent. - if (TWIInfo.mode == RepeatedStartSent) - { - TWIInfo.mode = Initializing; - TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer - TWISendTransmit(); // Send the data - } - else // Otherwise, just send the normal start signal to begin transmission. - { - TWIInfo.mode = Initializing; - TWISendStart(); - } - if(blocking){ - // Wait until ready - while (!isTWIReady()){_delay_us(1);} - } -} - - -// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart) -// { -// if (dataLen <= TXMAXBUFLEN) -// { -// // Wait until ready -// while (!isTWIReady()) {_delay_us(1);} -// // Set repeated start mode -// TWIInfo.repStart = repStart; -// // Copy data into the transmit buffer -// uint8_t *data = (uint8_t *)TXdata; -// for (int i = 0; i < dataLen; i++) -// { -// TWITransmitBuffer[i] = data[i]; -// } -// // Copy transmit info to global variables -// TXBuffLen = dataLen; -// TXBuffIndex = 0; - -// // If a repeated start has been sent, then devices are already listening for an address -// // and another start does not need to be sent. -// if (TWIInfo.mode == RepeatedStartSent) -// { -// TWIInfo.mode = Initializing; -// TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer -// TWISendTransmit(); // Send the data -// } -// else // Otherwise, just send the normal start signal to begin transmission. -// { -// TWIInfo.mode = Initializing; -// TWISendStart(); -// } - -// } -// else -// { -// return 1; // return an error if data length is longer than buffer -// } -// return 0; -// } - -uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart) -{ - // Check if number of bytes to read can fit in the RXbuffer - if (bytesToRead < RXMAXBUFLEN) - { - // Reset buffer index and set RXBuffLen to the number of bytes to read - RXBuffIndex = 0; - RXBuffLen = bytesToRead; - // Create the one value array for the address to be transmitted - uint8_t TXdata[1]; - // Shift the address and AND a 1 into the read write bit (set to write mode) - TXdata[0] = (TWIaddr << 1) | 0x01; - // Use the TWITransmitData function to initialize the transfer and address the slave - TWITransmitData(TXdata, 1, repStart, 0); - } - else - { - return 0; - } - return 1; -} - -ISR (TWI_vect) -{ - switch (TWI_STATUS) - { - // ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- // - case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received - // Set mode to Master Transmitter - TWIInfo.mode = MasterTransmitter; - case TWI_START_SENT: // Start condition has been transmitted - case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received - if (TXBuffIndex < TXBuffLen) // If there is more data to send - { - TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendTransmit(); // Send the data - } - // This transmission is complete however do not release bus yet - else if (TWIInfo.repStart) - { - TWIInfo.errorCode = 0xFF; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWISendStop(); - } - break; - - // ----\/ ---- MASTER RECEIVER ----\/ ---- // - - case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received - // Switch to Master Receiver mode - TWIInfo.mode = MasterReceiver; - // If there is more than one byte to be read, receive data byte and return an ACK - if (RXBuffIndex < RXBuffLen-1) - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendACK(); - } - // Otherwise when a data byte (the only data byte) is received, return NACK - else - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendNACK(); - } - break; - - case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted. - - /// -- HANDLE DATA BYTE --- /// - TWIReceiveBuffer[RXBuffIndex++] = TWDR; - // If there is more than one byte to be read, receive data byte and return an ACK - if (RXBuffIndex < RXBuffLen-1) - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendACK(); - } - // Otherwise when a data byte (the only data byte) is received, return NACK - else - { - TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; - TWISendNACK(); - } - break; - - case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission. - - /// -- HANDLE DATA BYTE --- /// - TWIReceiveBuffer[RXBuffIndex++] = TWDR; - // This transmission is complete however do not release bus yet - if (TWIInfo.repStart) - { - TWIInfo.errorCode = 0xFF; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = 0xFF; - TWISendStop(); - } - break; - - // ----\/ ---- MT and MR common ----\/ ---- // - - case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received - case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received - case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received - case TWI_LOST_ARBIT: // Arbitration has been lost - // Return error and send stop and set mode to ready - if (TWIInfo.repStart) - { - TWIInfo.errorCode = TWI_STATUS; - TWISendStart(); - } - // All transmissions are complete, exit - else - { - TWIInfo.mode = Ready; - TWIInfo.errorCode = TWI_STATUS; - TWISendStop(); - } - break; - case TWI_REP_START_SENT: // Repeated start has been transmitted - // Set the mode but DO NOT clear TWINT as the next data is not yet ready - TWIInfo.mode = RepeatedStartSent; - break; - - // ----\/ ---- SLAVE RECEIVER ----\/ ---- // - - // TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY - - // ----\/ ---- SLAVE TRANSMITTER ----\/ ---- // - - // TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY - - // ----\/ ---- MISCELLANEOUS STATES ----\/ ---- // - case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition - // Rather, it is there to be manually set between operations - break; - case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error - TWIInfo.errorCode = TWI_ILLEGAL_START_STOP; - TWIInfo.mode = Ready; - TWISendStop(); - break; - } - -} diff --git a/keyboards/meira/TWIlib.h b/keyboards/meira/TWIlib.h deleted file mode 100755 index 6db3cc9513..0000000000 --- a/keyboards/meira/TWIlib.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * TWIlib.h - * - * Created: 6/01/2014 10:38:42 PM - * Author: Chris Herring - */ - - -#ifndef TWILIB_H_ -#define TWILIB_H_ -// TWI bit rate -#define TWI_FREQ 400000 -// Get TWI status -#define TWI_STATUS (TWSR & 0xF8) -// Transmit buffer length -#define TXMAXBUFLEN 20 -// Receive buffer length -#define RXMAXBUFLEN 20 -// Global transmit buffer -volatile uint8_t *TWITransmitBuffer; -// Global receive buffer -volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; -// Buffer indexes -volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. -int RXBuffIndex; // Current index in the receive buffer -// Buffer lengths -int TXBuffLen; // The total length of the transmit buffer -int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) - -typedef enum { - Ready, - Initializing, - RepeatedStartSent, - MasterTransmitter, - MasterReceiver, - SlaceTransmitter, - SlaveReciever - } TWIMode; - - typedef struct TWIInfoStruct{ - TWIMode mode; - uint8_t errorCode; - uint8_t repStart; - }TWIInfoStruct; -TWIInfoStruct TWIInfo; - - -// TWI Status Codes -#define TWI_START_SENT 0x08 // Start sent -#define TWI_REP_START_SENT 0x10 // Repeated Start sent -// Master Transmitter Mode -#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received -#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received -#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received -#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received -// Master Receiver Mode -#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received -#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received -#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned -#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned - -// Miscellaneous States -#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost -#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available -#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected -#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only - - -#define TWISendStart() (TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN)|(1<<TWIE)) // Send the START signal, enable interrupts and TWI, clear TWINT flag to resume transfer. -#define TWISendStop() (TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN)|(1<<TWIE)) // Send the STOP signal, enable interrupts and TWI, clear TWINT flag. -#define TWISendTransmit() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // Used to resume a transfer, clear TWINT and ensure that TWI and interrupts are enabled. -#define TWISendACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)|(1<<TWEA)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled and respond with an ACK if the device is addressed as a slave or after it receives a byte. -#define TWISendNACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled but DO NOT respond with an ACK if the device is addressed as a slave or after it receives a byte. - -// Function declarations -void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking); -void TWIInit(void); -uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart); -uint8_t isTWIReady(void); - -#endif // TWICOMMS_H_
\ No newline at end of file diff --git a/keyboards/meira/config.h b/keyboards/meira/config.h deleted file mode 100644 index 8cbd82f01d..0000000000 --- a/keyboards/meira/config.h +++ /dev/null @@ -1,49 +0,0 @@ -/* -Copyright 2017 Cole Markham - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6061 -#define DEVICE_VER 0x0001 -#define MANUFACTURER WoodKeys.click -#define PRODUCT Meira -#define DESCRIPTION Low-profile Ortholinear Compact keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* COL2ROW, ROW2COL*/ -//#define DIODE_DIRECTION - -#ifdef BACKLIGHT_ENABLE -#define BACKLIGHT_LEVELS 10 -#define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255} -#endif - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 - -#define RGBLED_NUM 15 // Number of LEDs -#endif - -#endif diff --git a/keyboards/meira/featherble/config.h b/keyboards/meira/featherble/config.h deleted file mode 100644 index d8f86fe027..0000000000 --- a/keyboards/meira/featherble/config.h +++ /dev/null @@ -1,173 +0,0 @@ -/* -Copyright 2017 Cole Markham, WoodKeys.click - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef FEATHERBLECONFIG_H -#define FEATHERBLECONFIG_H - -#include "config_common.h" - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F7, F6, F5, F4 } -// Column pins to demux in LSB order -#define MATRIX_COL_PINS { C7, B7, B6, C6 } -#define LED_EN_PIN D2 -#define UNUSED_PINS - -#define QMK_SPEAKER B5 -#define B5_AUDIO -#define AUDIO_VOICES - -#define CATERINA_BOOTLOADER - - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -//#define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/meira/featherble/featherble.c b/keyboards/meira/featherble/featherble.c deleted file mode 100644 index 560f0db297..0000000000 --- a/keyboards/meira/featherble/featherble.c +++ /dev/null @@ -1 +0,0 @@ -#include "meira.h" diff --git a/keyboards/meira/featherble/featherble.h b/keyboards/meira/featherble/featherble.h deleted file mode 100644 index b7599b9941..0000000000 --- a/keyboards/meira/featherble/featherble.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef FEATHERBLE_H -#define FEATHERBLE_H - -#include "../meira.h" - -#include "quantum.h" - - -#endif diff --git a/keyboards/meira/featherble/rules.mk b/keyboards/meira/featherble/rules.mk deleted file mode 100644 index e27608983f..0000000000 --- a/keyboards/meira/featherble/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -BLUETOOTH_ENABLE = yes -F_CPU = 8000000 -BLUETOOTH = AdafruitBLE diff --git a/keyboards/meira/issi.c b/keyboards/meira/issi.c deleted file mode 100755 index 600a465ba3..0000000000 --- a/keyboards/meira/issi.c +++ /dev/null @@ -1,286 +0,0 @@ -#ifdef ISSI_ENABLE - -#include <stdlib.h> -#include <stdint.h> -#include <util/delay.h> -#include <avr/sfr_defs.h> -#include <avr/io.h> -#include <util/twi.h> -#include "issi.h" -#include "print.h" -#include "TWIlib.h" - -#define ISSI_ADDR_DEFAULT 0xE8 - -#define ISSI_REG_CONFIG 0x00 -#define ISSI_REG_CONFIG_PICTUREMODE 0x00 -#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08 - -#define ISSI_CONF_PICTUREMODE 0x00 -#define ISSI_CONF_AUTOFRAMEMODE 0x04 -#define ISSI_CONF_AUDIOMODE 0x08 - -#define ISSI_REG_PICTUREFRAME 0x01 - -#define ISSI_REG_SHUTDOWN 0x0A -#define ISSI_REG_AUDIOSYNC 0x06 - -#define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' -uint8_t control[8][9] = { - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, - {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; -ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0}; - -#ifndef cbi -#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#endif - -#ifndef sbi -#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#endif - -#define I2C_WRITE 0 -#define F_SCL 400000UL // SCL frequency -#define Prescaler 1 -#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2) - -uint8_t i2c_start(uint8_t address) -{ - // reset TWI control register - TWCR = 0; - // transmit START condition - TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); - // wait for end of transmission - while( !(TWCR & (1<<TWINT)) ); - - // check if the start condition was successfully transmitted - if((TWSR & 0xF8) != TW_START){ return 1; } - - // load slave address into data register - TWDR = address; - // start transmission of address - TWCR = (1<<TWINT) | (1<<TWEN); - // wait for end of transmission - while( !(TWCR & (1<<TWINT)) ); - - // check if the device has acknowledged the READ / WRITE mode - uint8_t twst = TW_STATUS & 0xF8; - if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1; - - return 0; -} - -uint8_t i2c_write(uint8_t data) -{ - // load data into data register - TWDR = data; - // start transmission of data - TWCR = (1 << TWINT) | (1 << TWEN); - // wait for end of transmission - while (!(TWCR & (1 << TWINT))) - ; - - if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { - return 1; - } - return 0; -} - -uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length) -{ - TWBR = (uint8_t)TWBR_val; - if (i2c_start(address | I2C_WRITE)) - return 1; - for (uint16_t i = 0; i < length; i++) { - if (i2c_write(data[i])) - return 1; - } - // transmit STOP condition - TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO); - return 0; -} - -void setFrame(uint8_t device, uint8_t frame) -{ - static uint8_t current_frame = -1; - if(current_frame != frame){ - uint8_t payload[] = { - ISSI_ADDR_DEFAULT | device << 1, - ISSI_COMMANDREGISTER, - frame - }; - TWITransmitData(payload, sizeof(payload), 0, 1); - } - // static uint8_t current_frame = 0xFF; - // if(current_frame == frame){ - // // return; - // } - // uint8_t payload[2] = { ISSI_COMMANDREGISTER, frame }; - // i2c_transmit(ISSI_ADDR_DEFAULT | device << 1, payload, 2); - // current_frame = frame; -} - -void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data) -{ - // Set the frame - setFrame(device, frame); - - // Write to the register - uint8_t payload[] = { - ISSI_ADDR_DEFAULT | device << 1, - reg, - data - }; - TWITransmitData(payload, sizeof(payload), 0, 1); -} - -// void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm) -// { -// xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm); -// uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0... -// uint8_t y = cy - 1; // creating them once for less confusion -// if(pwm == 0){ -// cbi(control[matrix][y], x); -// }else{ -// sbi(control[matrix][y], x); -// } -// uint8_t device = (matrix & 0x06) >> 1; -// uint8_t control_reg = (y << 1) | (matrix & 0x01); -// uint8_t pwm_reg = 0; -// switch(matrix & 0x01){ -// case 0: -// pwm_reg = 0x24; -// break; -// case 1: -// pwm_reg = 0x2C; -// break; -// } -// pwm_reg += (y << 4) + x; -// xprintf(" device: %02X\n", device); -// xprintf(" control: %02X %02X\n", control_reg, control[matrix][y]); -// xprintf(" pwm: %02X %02X\n", pwm_reg, pwm); -// writeRegister8(device, 0, control_reg, control[matrix][y]); -// writeRegister8(device, 0, control_reg + 0x12, control[matrix][y]); -// writeRegister8(device, 0, pwm_reg, pwm); -// } - -void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm) -{ - uint8_t device_addr = (matrix & 0x06) >> 1; - ISSIDeviceStruct *device = issi_devices[device_addr]; - if(device == 0){ - return; - } - // xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm); - uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0... - uint8_t y = cy - 1; // creating them once for less confusion - uint8_t control_reg = (y << 1) | (matrix & 0x01); - if(pwm == 0){ - cbi(device->led_ctrl[control_reg], x); - cbi(device->led_blink_ctrl[control_reg], x); - }else{ - sbi(device->led_ctrl[control_reg], x); - sbi(device->led_blink_ctrl[control_reg], x); - } - uint8_t pwm_reg = 0; - switch(matrix & 0x01){ - case 0: - pwm_reg = 0x00; - break; - case 1: - pwm_reg = 0x08; - break; - } - pwm_reg += (y << 4) + x; - // xprintf(" device_addr: %02X\n", device_addr); - // xprintf(" control: %02X %02X\n", control_reg, control[matrix][y]); - // xprintf(" pwm: %02X %02X\n", pwm_reg, pwm); - // writeRegister8(device_addr, 0, control_reg, control[matrix][y]); - device->led_pwm[pwm_reg] = pwm; - device->led_dirty = 1; - - // writeRegister8(device_addr, 0, control_reg + 0x12, control[matrix][y]); - // writeRegister8(device_addr, 0, pwm_reg, pwm); -} - -void update_issi(uint8_t device_addr, uint8_t blocking) -{ - // This seems to take about 6ms - ISSIDeviceStruct *device = issi_devices[device_addr]; - if(device != 0){ - if(device->fn_dirty){ - device->fn_dirty = 0; - setFrame(device_addr, ISSI_BANK_FUNCTIONREG); - TWITransmitData(&device->fn_device_addr, sizeof(device->fn_registers) + 2, 0, 1); - } - if(device->led_dirty){ - device->led_dirty = 0; - setFrame(device_addr, 0); - TWITransmitData(&device->led_device_addr, 0xB6, 0, blocking); - } - } -} - -void issi_init(void) -{ - // Set LED_EN/SDB high to enable the chip - xprintf("Enabing SDB on pin: %d\n", LED_EN_PIN); - _SFR_IO8((LED_EN_PIN >> 4) + 1) &= ~_BV(LED_EN_PIN & 0xF); // IN - _SFR_IO8((LED_EN_PIN >> 4) + 2) |= _BV(LED_EN_PIN & 0xF); // HI - TWIInit(); - for(uint8_t device_addr = 0; device_addr < 4; device_addr++){ - xprintf("ISSI Init device: %d\n", device_addr); - // If this device has been previously allocated, free it - if(issi_devices[device_addr] != 0){ - free(issi_devices[device_addr]); - } - // Try to shutdown the device, if this fails skip this device - writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00); - while (!isTWIReady()){_delay_us(1);} - if(TWIInfo.errorCode != 0xFF){ - xprintf("ISSI init failed %d %02X %02X\n", device_addr, TWIInfo.mode, TWIInfo.errorCode); - continue; - } - // Allocate the device structure - calloc zeros it for us - ISSIDeviceStruct *device = (ISSIDeviceStruct *)calloc(sizeof(ISSIDeviceStruct) * 2, 1); - issi_devices[device_addr] = device; - device->fn_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1; - device->fn_register_addr = 0; - device->led_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1; - device->led_register_addr = 0; - // set dirty bits so that all of the buffered data is written out - device->fn_dirty = 1; - device->led_dirty = 1; - update_issi(device_addr, 1); - // Set the function register to picture mode - // device->fn_reg[ISSI_REG_CONFIG] = ISSI_REG_CONFIG_PICTUREMODE; - writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01); - } - - // Shutdown and set all registers to 0 - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00); - // for(uint8_t bank = 0; bank <= 7; bank++){ - // for (uint8_t reg = 0x00; reg <= 0xB3; reg++) { - // writeRegister8(device_addr, bank, reg, 0x00); - // } - // } - // for (uint8_t reg = 0; reg <= 0x0C; reg++) { - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, reg, 0x00); - // } - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE); - // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01); - // picture mode - // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x01, 0x01); - - //Enable blink - // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x05, 0x48B); - - //Enable Breath - -} - -#endif diff --git a/keyboards/meira/issi.h b/keyboards/meira/issi.h deleted file mode 100755 index 51777f6ee3..0000000000 --- a/keyboards/meira/issi.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifdef ISSI_ENABLE -#ifndef ISSI_H -#define ISSI_H - -typedef struct ISSIDeviceStruct{ - uint8_t fn_dirty; // function registers need to be resent - uint8_t fn_device_addr; - uint8_t fn_register_addr; - uint8_t fn_registers[13]; - uint8_t led_dirty; // LED data has changed and needs to be resent - uint8_t led_device_addr; - uint8_t led_register_addr; - uint8_t led_ctrl[18]; - uint8_t led_blink_ctrl[18]; - uint8_t led_pwm[144]; -}ISSIDeviceStruct; - -extern ISSIDeviceStruct *issi_devices[]; - -// Low level commands- 'device' is the 2-bit i2c id. -void issi_init(void); -void set_shutdown(uint8_t device, uint8_t shutdown); -void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data); - -// Higher level, no device is given, but it is calculated from 'matrix' -// Each device has 2 blocks, max of 4 devices: -// Device | Block = Matrix -// 0 A 0 -// 0 B 1 -// 1 A 2 -// 1 B 3 -// 2 A 4 -// 2 B 5 -// 3 A 6 -// 3 B 7 -void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm); -void update_issi(uint8_t device_addr, uint8_t blocking); - -#endif -#endif
\ No newline at end of file diff --git a/keyboards/meira/keymaps/cole/config.h b/keyboards/meira/keymaps/cole/config.h deleted file mode 100644 index 90c490e836..0000000000 --- a/keyboards/meira/keymaps/cole/config.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright 2017 Cole Markham, WoodKeys.click - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here -#define MUSIC_MASK (keycode != KC_NO) -#ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(IMPERIAL_MARCH) - // Disable music mode to keep the firmware size down - #define NO_MUSIC_MODE - -#endif - -#endif diff --git a/keyboards/meira/keymaps/cole/keymap.c b/keyboards/meira/keymaps/cole/keymap.c deleted file mode 100644 index 71c8d9711d..0000000000 --- a/keyboards/meira/keymaps/cole/keymap.c +++ /dev/null @@ -1,249 +0,0 @@ -/* Copyright 2017 Cole Markham - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "meira.h" -#include "lighting.h" - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 - - -#ifndef BLUETOOTH_ENABLE -#define OUT_BT KC_TRNS -#endif - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, -}; - -// define variables for reactive RGB -bool TOG_STATUS = false; -int RGB_current_mode; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Ctrl | Alt |Lower | Cmd |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTY] = KEYMAP( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ - ADJUST, KC_LCTL, KC_LALT, KC_LALT, LOWER, KC_LGUI, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Lower - * ,-----------------------------------------------------------------------------------. - * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ~ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_LOWER] = KEYMAP( \ - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, KC_QUOT, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), - - /* Raise - * ,-----------------------------------------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ` | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Home | PgUp | PgDn | End | - * `-----------------------------------------------------------------------------------' - */ - [_RAISE] = KEYMAP( \ - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), - - /* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_ADJUST] = KEYMAP( \ - RESET, _______, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \ - BL_STEP, RGB_MOD, _______, AU_ON, AU_OFF, _______, _______, _______, _______, _______, _______, _______, \ - BL_TOGG, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, OUT_AUTO, OUT_USB, OUT_BT \ - ) -}; - -// Setting ADJUST layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); -#endif - layer_on(layer3); - } else { - layer_off(layer3); - } -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case LOWER: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; -#ifdef RGBLIGHT_ENABLE - rgblight_mode(16); -#endif - } - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change -#endif - TOG_STATUS = false; - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; -#ifdef RGBLIGHT_ENABLE - rgblight_mode(15); -#endif - } - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change -#endif - layer_off(_RAISE); - TOG_STATUS = false; - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - // FIXME add RGB feedback - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - case BL_TOGG: -#ifdef BACKLIGHT_ENABLE - if (record->event.pressed) { - print("Enabling backlight\n"); - backlight_init_ports(); - } -#endif - return false; - break; - case BL_STEP: - if (record->event.pressed) { -#ifdef BACKLIGHT_ENABLE - backlight_step(); -#endif - - } - return false; - break; - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released -#ifdef RGBLIGHT_ENABLE - case RGB_MOD: - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - return false; - break; -#endif - } - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/meira/keymaps/cole/readme.md b/keyboards/meira/keymaps/cole/readme.md deleted file mode 100644 index be84048813..0000000000 --- a/keyboards/meira/keymaps/cole/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for meira diff --git a/keyboards/meira/keymaps/cole/rules.mk b/keyboards/meira/keymaps/cole/rules.mk deleted file mode 100644 index 8f8d53e57a..0000000000 --- a/keyboards/meira/keymaps/cole/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -AUDIO_ENABLE = yes # Audio output on port C6 -EXTRAFLAGS+=-flto # -4-7k
\ No newline at end of file diff --git a/keyboards/meira/keymaps/default/config.h b/keyboards/meira/keymaps/default/config.h deleted file mode 100644 index e3776d2eff..0000000000 --- a/keyboards/meira/keymaps/default/config.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright 2017 Cole Markham, WoodKeys.click - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// place overrides here - -// place overrides here -#define MUSIC_MASK (keycode != KC_NO) -#ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(PLANCK_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) - - #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } -#endif diff --git a/keyboards/meira/keymaps/default/keymap.c b/keyboards/meira/keymaps/default/keymap.c deleted file mode 100644 index 5703999a04..0000000000 --- a/keyboards/meira/keymaps/default/keymap.c +++ /dev/null @@ -1,326 +0,0 @@ -/* Copyright 2017 Cole Markham - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include QMK_KEYBOARD_H -#include "lighting.h" - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - ADJUST, -}; - -#ifdef AUDIO_ENABLE - -float tone_my_startup[][2] = SONG(ODE_TO_JOY); -float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY); - -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); - -#endif /* AUDIO_ENABLE */ - -// define variables for reactive RGB -bool TOG_STATUS = false; -int RGB_current_mode; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Ctrl | Alt |Lower | Cmd |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTY] = KEYMAP( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ - ADJUST, KC_LCTL, KC_LALT, KC_LALT, LOWER, KC_LGUI, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_COLEMAK] = KEYMAP( \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Dvorak - * ,-----------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | / | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_DVORAK] = KEYMAP( \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Lower - * ,-----------------------------------------------------------------------------------. - * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ~ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_LOWER] = KEYMAP( \ - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, KC_QUOT, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), - - /* Raise - * ,-----------------------------------------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ` | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Home | PgUp | PgDn | End | - * `-----------------------------------------------------------------------------------' - */ - [_RAISE] = KEYMAP( \ - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), - - /* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_ADJUST] = KEYMAP( \ - BL_TOGG, RESET, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \ - BL_STEP, RGB_MOD, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - ) -}; - -// Setting ADJUST layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); -#endif - layer_on(layer3); - } else { - layer_off(layer3); - } -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif -// persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); - #endif -// persistent_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); - #endif -// persistent_default_layer_set(1UL<<_DVORAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; -#ifdef RGBLIGHT_ENABLE - rgblight_mode(16); -#endif - } - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change -#endif - TOG_STATUS = false; - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; -#ifdef RGBLIGHT_ENABLE - rgblight_mode(15); -#endif - } - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change -#endif - layer_off(_RAISE); - TOG_STATUS = false; - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - // FIXME add RGB feedback - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - case BL_TOGG: -#ifdef BACKLIGHT_ENABLE - if (record->event.pressed) { - print("Enabling backlight\n"); - backlight_init_ports(); - } -#endif - return false; - break; - case BL_STEP: - if (record->event.pressed) { - print("Stepping backlight\n"); -#ifdef BACKLIGHT_ENABLE - print("Really stepping backlight\n"); - backlight_step(); -#endif - - } - return false; - break; - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released -#ifdef RGBLIGHT_ENABLE - case RGB_MOD: - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - return false; - break; -#endif -// case BL_INC: -// meira_inc_backlight_level(); -// return false; -// break; - } - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/meira/keymaps/default/readme.md b/keyboards/meira/keymaps/default/readme.md deleted file mode 100644 index be84048813..0000000000 --- a/keyboards/meira/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for meira diff --git a/keyboards/meira/keymaps/grahampheath/config.h b/keyboards/meira/keymaps/grahampheath/config.h deleted file mode 100644 index fcc5e4f136..0000000000 --- a/keyboards/meira/keymaps/grahampheath/config.h +++ /dev/null @@ -1,35 +0,0 @@ -/* Copyright 2017 Cole Markham, WoodKeys.click - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here -#define MUSIC_MASK (keycode != KC_NO) -#define C6_AUDIO -#ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(PLANCK_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) - - #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } -#endif - -#endif diff --git a/keyboards/meira/keymaps/grahampheath/keymap.c b/keyboards/meira/keymaps/grahampheath/keymap.c deleted file mode 100644 index cd02137877..0000000000 --- a/keyboards/meira/keymaps/grahampheath/keymap.c +++ /dev/null @@ -1,421 +0,0 @@ -/* Copyright 2017 Cole Markham - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "meira.h" -#include "action_layer.h" -#include "action_code.h" - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _EMOJI 5 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - EMOJI, - ADJUST, - TOUNGE, - JOY, - FROWN, - HEART, - THMBUP, - THMBDN, - SHRUG, - WINK, - GRIN, - LLAP, - CRY, - SHIT, - FLIP, - FNGLEFT, - ABOVE, - FNGRIGHT, - CONFUSED -}; - -// define variables for reactive RGB -bool TOG_STATUS = false; -int RGB_current_mode; - -#define KC_X0 MT(MOD_LCTL, KC_ESC) // Hold for Left Ctrl, Tap for GraveESC -#define KC_X1 MT(MOD_RSFT, KC_ENT) // Hold for Right Shift, Tap for Enter -#define KC_X2 MT(MOD_RSFT, LGUI(KC_ENT)) // Send Command Enter -#define KC_X3 MT(MOD_LGUI, KC_SPC) // Hold for Left GUI, Tap for Space -#define KC_EMOJ TT(_EMOJI) // Hold for Emoji Layer, or tap 5 times. -#define KC_QS LGUI(KC_SPC) // Send Command + Space (for QuickSilver). -#define KC_TABR LGUI(KC_RCBR) // Send Command + } (for tab changing). -#define KC_TABL LGUI(KC_LCBR) // Send Command + { (for tab changing). -#define HYPR_0 HYPR(KC_TILD) // Send Hyper + ~. -#define HYPR_1 HYPR(KC_EXLM) // Send Hyper + !. -#define HYPR_2 HYPR(KC_AT) // Send Hyper + @. - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Emoji | Ctrl | Alt |Lower | Cmd |Space+|Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTY] = KEYMAP( \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_X0, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_X1, \ - KC_EMOJ, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_X3, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_COLEMAK] = KEYMAP( \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Dvorak - * ,-----------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | / | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_DVORAK] = KEYMAP( \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Emoji Layer - * - * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - * │HYPR0│ │ ;-) │ │ │ :-P │ │ │:'-( │FLIP │ │ │ - * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - * │HYPR1│ 👆 │SHRUG│ │ :-( │ │ <3 │ :-) │ │LLAP │ │ │ - * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - * │HYPR2│ │ │ | :-\ │ │ │ :-D │ SHIT│ │ │ │ - * ├─────┼─────┼─────┼─────┼─────┼─────┴─────┼─────┼─────┼─────┼─────┼─────┤ - * │ │ │ │ │Brig-│ Sleep │Brig+│ 👈 │ 👎 | 👍 │ 👉 │ - * └─────┴─────┴─────┴─────┴─────┴───────────┴─────┴─────┴─────┴─────┴─────┘ - */ - [_EMOJI] = KEYMAP ( \ - HYPR_0, _______, WINK, _______, _______, TOUNGE, _______, _______, CRY, FLIP, _______, _______, \ - HYPR_1, ABOVE, SHRUG, _______, FROWN, _______, HEART, JOY, _______, LLAP, _______, _______, \ - HYPR_2, _______, _______, _______, CONFUSED, _______, _______, GRIN, SHIT, _______, _______, _______, \ - _______, _______, _______, _______, KC_SLCK, KC_SLEP, KC_SLEP, KC_PAUS, FNGLEFT, THMBDN, THMBUP, FNGRIGHT \ - ), - - - - /* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Tab- | | | Tab+ | - * `-----------------------------------------------------------------------------------' - */ - [_LOWER] = KEYMAP( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ - _______, _______, _______, _______, _______, KC_QS, KC_QS, _______, KC_TABL, _______, _______, KC_TABR \ - ), - - /* Raise - * ,-----------------------------------------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ` | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Home | PgUp | PgDn | End | - * `-----------------------------------------------------------------------------------' - */ - [_RAISE] = KEYMAP( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_X2, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), - - /* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_ADJUST] = KEYMAP( \ - _______, RESET, _______, _______, _______, _______, KC_PSCR, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -#ifdef AUDIO_ENABLE - - float tone_qwerty[][2] = SONG(QWERTY_SOUND); - float tone_dvorak[][2] = SONG(DVORAK_SOUND); - float tone_colemak[][2] = SONG(COLEMAK_SOUND); - - - float plover_song[][2] = SONG(PLOVER_SOUND); - float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); -#endif - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); - #endif - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); - #endif - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - // FIXME add RGB feedback - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - case BL_TOGG: -#ifdef ISSI_ENABLE - if (record->event.pressed) { - print("Enabling backlight\n"); - issi_init(); - } -#endif - return false; - break; - case BL_STEP: - if (record->event.pressed) { - print("Stepping backlight\n"); - - } - return false; - break; - case FLIP: - if (record->event.pressed) { - SEND_STRING("&fliptable;"); - } - return false; - break; - case CONFUSED: - if (record->event.pressed) { - SEND_STRING(":-\\"); - } - // register_codeturn false; - break; - case SHIT: - if (record->event.pressed) { - SEND_STRING("&shit; "); - } - return false; - break; - case CRY: - if (record->event.pressed) { - SEND_STRING(":'-( "); - } - return false; - break; - case LLAP: - if (record->event.pressed) { - SEND_STRING("&llap; "); - } - return false; - break; - case GRIN: - if (record->event.pressed) { - SEND_STRING(":-D "); - } - return false; - break; - case TOUNGE: - if (record->event.pressed) { - SEND_STRING(":-P "); - } - return false; - break; - case JOY: - if (record->event.pressed) { - SEND_STRING(":-) "); - } - return false; - break; - case FROWN: - if (record->event.pressed) { - SEND_STRING(":-( "); - } - return false; - break; - case HEART: - if (record->event.pressed) { - SEND_STRING("<3 "); - } - return false; - break; - case SHRUG: - if (record->event.pressed) { - SEND_STRING("&shrug; "); - } - return false; - break; - case THMBUP: - if (record->event.pressed) { - SEND_STRING("&thumbup; "); - } - return false; - break; - case THMBDN: - if (record->event.pressed) { - SEND_STRING("&thumbdown; "); - } - return false; - break; - case FNGLEFT: - if (record->event.pressed) { - SEND_STRING("&fingerleft; "); - } - return false; - break; - case FNGRIGHT: - if (record->event.pressed) { - SEND_STRING("&fingerright; "); - } - return false; - break; - case WINK: - if (record->event.pressed) { - SEND_STRING(";-) "); - } - return false; - break; - case ABOVE: - if (record->event.pressed) { - SEND_STRING("&above; "); - } - return false; - break; - - } - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/meira/keymaps/grahampheath/readme.md b/keyboards/meira/keymaps/grahampheath/readme.md deleted file mode 100644 index 10459e3566..0000000000 --- a/keyboards/meira/keymaps/grahampheath/readme.md +++ /dev/null @@ -1,55 +0,0 @@ -# Graham's Meira. - -Don't expect this to work for you unaltered! For the record, these are my notes, not a guide for you :-) - -## Known issues: -Anything over 28k will begin to overwrite the boot loader, which is a pain! - -Be sure to check file size with: -``` -avr-size meira_promicro_grahampheath.hex -``` - -## Sounds -I've added a [8ohm 0.5W speaker](http://a.co/6MIKZSy), its a bit large, but it fits in approximately the same space as the ProMicro. I soldered directly to PC6 and GND. - -As the Meira code stood, adding sound increased the hex beyond what the boot loader could handle, so I had to dial way back on features that I wasnt using, like backlighting and RGB support. I also removed function keys, though I think you could restore some of these features, you certainly can't restore all of them and still fit with a boot loader. - -## Build - -Built for the ProMicro with: -``` -make meira/promicro:grahampheath -``` - -Build and upload with, which is cool because it will sense your port. -``` -make meira/promicro:grahampheath:avrdude -``` - -Program a hex directly with: -``` -avrdude -p atmega32u4 -P /dev/tty.usbmodem14111 -c avr109 -v -e -D -U flash:w:meira_promicro_grahampheath.hex -``` - -If you use an AVRISP you will be program a hex without a boot loader: -``` -avrdude -p atmega32u4 -P /dev/tty.usbmodem14111 -c avrisp -v -e -U flash:w:meira_promicro_grahampheath.hex -``` - -## Bricked -Did you overwrite your boot loader? - -I did... - -I used an [Ardunio as an ISP](https://learn.sparkfun.com/tutorials/installing-an-arduino-bootloader), and was able to program various boot loaders. Ultimately it seemed like this was the right combo: - -[ProMicro pinout](https://cdn.sparkfun.com/assets/9/c/3/c/4/523a1765757b7f5c6e8b4567.png) - -[Wiring](https://forum.arduino.cc/index.php?PHPSESSID=467mm69btif69hdj5e3gil5465&action=dlattach;topic=363341.0;attach=145820): [via u/dmjlambert](https://forum.arduino.cc/index.php?topic=363341.0) - -ProMicro boot loader hex is called `Caterina-promicro16.hex` and is stored on [Sparkfun's GitHub](https://github.com/sparkfun/Arduino_Boards) - -``` -avrdude -c avrisp -p m32u4 -P /dev/tty.usbmodem14141 -v -e -U flash:w:Caterina-promicro16.hex -U efuse:w:0xcb:m -U hfuse:w:0xd8:m -U lfuse:w:0xff:m -``` diff --git a/keyboards/meira/keymaps/grahampheath/rules.mk b/keyboards/meira/keymaps/grahampheath/rules.mk deleted file mode 100644 index b3b1980eb1..0000000000 --- a/keyboards/meira/keymaps/grahampheath/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -AUDIO_ENABLE = yes # Audio output on port C6 -EXTRAFLAGS+=-flto # -4-7k -MOUSEKEY_ENABLE = no # Mouse keys(-47kb) -ISSI_ENABLE = no -BACKLIGHT_ENABLE = no
\ No newline at end of file diff --git a/keyboards/meira/keymaps/takmiya/config.h b/keyboards/meira/keymaps/takmiya/config.h deleted file mode 100644 index 97210115b9..0000000000 --- a/keyboards/meira/keymaps/takmiya/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2017 Cole Markham, WoodKeys.click - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/meira/keymaps/takmiya/keymap.c b/keyboards/meira/keymaps/takmiya/keymap.c deleted file mode 100644 index 12dad6d690..0000000000 --- a/keyboards/meira/keymaps/takmiya/keymap.c +++ /dev/null @@ -1,258 +0,0 @@ -/* Copyright 2017 Cole Markham - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "meira.h" -#include "issi.h" -#include "lighting.h" - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, -}; - -// define variables for reactive RGB -bool TOG_STATUS = false; -int RGB_current_mode; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . |//GUI |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | GUI |Lower |Space |Enter |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTY] = KEYMAP( \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, GUI_T(KC_SLSH), KC_ENT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_RGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), - - /* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | DEL | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | Home | PgUp | PgDn | End | - * `-----------------------------------------------------------------------------------' - */ - [_LOWER] = KEYMAP( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), - - /* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | DEL | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | Home | PgUp | PgDn | End | - * `-----------------------------------------------------------------------------------' - */ - [_RAISE] = KEYMAP( \ - KC_GRV , KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), - - /* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| | | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_ADJUST] = KEYMAP( \ - BL_TOGG, RESET, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \ - BL_STEP, RGB_MOD, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - ) -}; - -// Setting ADJUST layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); -#endif - layer_on(layer3); - } else { - layer_off(layer3); - } -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif -// persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; -#ifdef RGBLIGHT_ENABLE - rgblight_mode(16); -#endif - } - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change -#endif - TOG_STATUS = false; - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; -#ifdef RGBLIGHT_ENABLE - rgblight_mode(15); -#endif - } - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { -#ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change -#endif - layer_off(_RAISE); - TOG_STATUS = false; - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - // FIXME add RGB feedback - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - case BL_TOGG: -#ifdef ISSI_ENABLE - if (record->event.pressed) { - print("Enabling backlight\n"); - issi_init(); - } -#endif - return false; - break; - case BL_STEP: - if (record->event.pressed) { - print("Stepping backlight\n"); -#ifdef BACKLIGHT_ENABLE - print("Really stepping backlight\n"); - backlight_step(); -#endif - - } - return false; - break; - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released -#ifdef RGBLIGHT_ENABLE - case RGB_MOD: - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - return false; - break; -#endif -// case BL_INC: -// meira_inc_backlight_level(); -// return false; -// break; - } - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/meira/keymaps/takmiya/readme.md b/keyboards/meira/keymaps/takmiya/readme.md deleted file mode 100644 index 40f48bb091..0000000000 --- a/keyboards/meira/keymaps/takmiya/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The takmiya keymap for meira diff --git a/keyboards/meira/lighting.c b/keyboards/meira/lighting.c deleted file mode 100755 index 37bb45aec8..0000000000 --- a/keyboards/meira/lighting.c +++ /dev/null @@ -1,97 +0,0 @@ -#ifdef ISSI_ENABLE - - -#include <avr/sfr_defs.h> -#include <avr/timer_avr.h> -#include <avr/wdt.h> -#include "meira.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "debug.h" -#include "audio/audio.h" - - -const uint8_t backlight_pwm_map[BACKLIGHT_LEVELS] = BACKLIGHT_PWM_MAP; - - const uint8_t switch_matrices[] = {0, 1}; - - // Maps switch LEDs from Row/Col to ISSI matrix. - // Value breakdown: - // Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | - // | | ISSI Col | ISSI Row | - // / | - // Device -// const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = -// KEYMAP( -// 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, -// 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, -// 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, -// 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2); - -void backlight_set(uint8_t level){ -#ifdef BACKLIGHT_ENABLE - uint8_t pwm_value = 0; - if(level >= BACKLIGHT_LEVELS){ - level = BACKLIGHT_LEVELS; - } - if(level > 0){ - pwm_value = backlight_pwm_map[level-1]; - } - xprintf("BACKLIGHT_LEVELS: %d\n", BACKLIGHT_LEVELS); - xprintf("backlight_set level: %d pwm: %d\n", level, pwm_value); - for(int x = 1; x <= 9; x++){ - for(int y = 1; y <= 9; y++){ - activateLED(switch_matrices[0], x, y, pwm_value); - activateLED(switch_matrices[1], x, y, pwm_value); - } - } -#endif -} - - - -void set_backlight_by_keymap(uint8_t col, uint8_t row){ -// dprintf("LED: %02X, %d %d %d\n", lookup_value, matrix, led_col, led_row); -// activateLED(matrix, led_col, led_row, 255); -} - -void force_issi_refresh(){ - issi_devices[0]->led_dirty = true; - update_issi(0, true); - issi_devices[3]->led_dirty = true; - update_issi(3, true); -} - -void led_test(){ -#ifdef WATCHDOG_ENABLE - // This test take a long time to run, disable the WTD until its complete - wdt_disable(); -#endif - backlight_set(0); - force_issi_refresh(); -// for(uint8_t x = 0; x < sizeof(rgb_sequence); x++){ -// set_rgb(rgb_sequence[x], 255, 0, 0); -// force_issi_refresh(); -// _delay_ms(250); -// set_rgb(rgb_sequence[x], 0, 255, 0); -// force_issi_refresh(); -// _delay_ms(250); -// set_rgb(rgb_sequence[x], 0, 0, 255); -// force_issi_refresh(); -// _delay_ms(250); -// set_rgb(rgb_sequence[x], 0, 0, 0); -// force_issi_refresh(); -// } -#ifdef WATCHDOG_ENABLE - wdt_enable(WDTO_250MS); -#endif -} - -void backlight_init_ports(void){ - xprintf("backlight_init_ports\n"); - issi_init(); -} - -#endif - diff --git a/keyboards/meira/lighting.h b/keyboards/meira/lighting.h deleted file mode 100755 index dc55b70ef9..0000000000 --- a/keyboards/meira/lighting.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef LIGHTING_H -#define LIGHTING_H - -void led_test(void); -void force_issi_refresh(void); -void set_backlight(uint8_t level); -void set_backlight_by_keymap(uint8_t col, uint8_t row); - -#endif diff --git a/keyboards/meira/matrix.c b/keyboards/meira/matrix.c deleted file mode 100644 index c1952f35fb..0000000000 --- a/keyboards/meira/matrix.c +++ /dev/null @@ -1,280 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2017 Cole Markham <cole@ccmcomputing.net> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "meira.h" -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "config.h" -#include "timer.h" - -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 -#endif - -#if (DEBOUNCING_DELAY > 0) - static uint16_t debouncing_time; - static bool debouncing = false; -#endif - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[4] = MATRIX_COL_PINS; -//static const uint8_t lrow_pins[MATRIX_ROWS] = LED_ROW_PINS; -//static const uint8_t lcol_pins[4] = LED_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; -static void init_rows(void); -//static void init_lcols(void); -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); -static void unselect_cols(void); -static void select_col(uint8_t col); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_cols(); - init_rows(); -// init_lcols(); - -// TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); - -} - -uint8_t _matrix_scan(void) -{ - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) - bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } -# else - read_rows_on_col(matrix, current_col); -# endif - - } - -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - debouncing = false; - } -# endif - - return 1; -} - -uint8_t matrix_scan(void) -{ - uint8_t ret = _matrix_scan(); - matrix_scan_quantum(); - return ret; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - - -static void init_rows(void) -{ - for(uint8_t x = 0; x < MATRIX_ROWS; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) -{ - bool matrix_changed = false; - - // Select col and wait for col selection to stabilize - select_col(current_col); - wait_us(30); - - // For each row... - for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) - { - - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - - // Check row pin state - if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) - { - // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - else - { - // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) - { - matrix_changed = true; - } - } - - // Unselect col - unselect_cols(); - - return matrix_changed; -} - -static void select_col(uint8_t col) -{ -#ifdef FLIPPED_BOARD - col = MATRIX_COLS - col - 1; -#endif - for(uint8_t x = 0; x < 4; x++) { - uint8_t pin = col_pins[x]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - if (((col >> x) & 0x1) == 1){ - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HIGH - } else { - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW - } - } -} - -static void unselect_cols(void) -{ - // FIXME This really needs to use the global enable on the decoder, because currently this sets the value to col1 - for(uint8_t x = 0; x < 4; x++) { - uint8_t pin = col_pins[x]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW - } -} - - diff --git a/keyboards/meira/meira.c b/keyboards/meira/meira.c deleted file mode 100644 index 1d0db5e997..0000000000 --- a/keyboards/meira/meira.c +++ /dev/null @@ -1,100 +0,0 @@ -/* Copyright 2017 Cole Markham, WoodKeys.click - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "meira.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "quantum.h" -#define BACKLIGHT_BREATHING - -extern void backlight_set(uint8_t level); - -void matrix_init_kb(void) -{ - debug_enable=true; - print("meira matrix_init_kb\n"); - -#ifdef ISSI_ENABLE - issi_init(); -#endif - backlight_set(5); -#ifdef WATCHDOG_ENABLE - // This is done after turning the layer LED red, if we're caught in a loop - // we should get a flashing red light - wdt_enable(WDTO_500MS); -#endif - - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); -} - -void matrix_scan_kb(void) -{ -#ifdef WATCHDOG_ENABLE - wdt_reset(); -#endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - if(twi_last_ready > 1000){ - // Its been way too long since the last ISSI update, reset the I2C bus and start again - xprintf("TWI failed to recover, TWI re-init\n"); - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - if(isTWIReady()){ - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - if(issi_device){ - issi_device = 0; - }else{ - issi_device = 3; - } - }else{ - twi_last_ready++; - } -#endif - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // Test code that turns on the switch led for the key that is pressed - // set_backlight_by_keymap(record->event.key.col, record->event.key.row); - if (keycode == RESET) { - reset_keyboard_kb(); - } else { - } - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} - -void reset_keyboard_kb(){ -#ifdef WATCHDOG_ENABLE - MCUSR = 0; - wdt_disable(); - wdt_reset(); -#endif - xprintf("programming!\n"); - reset_keyboard(); -} diff --git a/keyboards/meira/meira.h b/keyboards/meira/meira.h deleted file mode 100644 index 8cdcd09fe2..0000000000 --- a/keyboards/meira/meira.h +++ /dev/null @@ -1,60 +0,0 @@ -/* Copyright 2017 Cole Markham - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef MEIRA_H -#define MEIRA_H - -#include "quantum.h" -#include "issi.h" - -void reset_keyboard_kb(void); - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ -} - -// Used to create a keymap using only KC_ prefixed keys -#define KC_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ - ) \ - KEYMAP( \ - KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \ - KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \ - KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \ - KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \ - ) - -#define LAYOUT_ortho_4x12 KEYMAP -#define KC_LAYOUT_ortho_4x12 KC_KEYMAP -#define LAYOUT_kc_ortho_4x12 KC_KEYMAP - -#endif - diff --git a/keyboards/meira/promicro/config.h b/keyboards/meira/promicro/config.h deleted file mode 100644 index 3c2113a200..0000000000 --- a/keyboards/meira/promicro/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2017 Cole Markham, WoodKeys.click - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef PROMICROCONFIG_H -#define PROMICROCONFIG_H - -#include "config_common.h" - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F7, F6, F5, F4 } -// Column pins to demux in LSB order -#define MATRIX_COL_PINS { B1, B3, B2, B6 } -#define LED_EN_PIN D2 -#define UNUSED_PINS - -#define CATERINA_BOOTLOADER - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/meira/promicro/promicro.c b/keyboards/meira/promicro/promicro.c deleted file mode 100644 index cf579c89b2..0000000000 --- a/keyboards/meira/promicro/promicro.c +++ /dev/null @@ -1,2 +0,0 @@ -#include "meira.h" - diff --git a/keyboards/meira/promicro/promicro.h b/keyboards/meira/promicro/promicro.h deleted file mode 100644 index 8e7525eab6..0000000000 --- a/keyboards/meira/promicro/promicro.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef FEATHERBLE_H -#define FEATHERBLE_H - -#include "../meira.h" - -#include "quantum.h" - -#include "pro_micro.h" - -#endif diff --git a/keyboards/meira/promicro/rules.mk b/keyboards/meira/promicro/rules.mk deleted file mode 100644 index 22e49971f1..0000000000 --- a/keyboards/meira/promicro/rules.mk +++ /dev/null @@ -1,14 +0,0 @@ -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -BLUETOOTH_ENABLE = no diff --git a/keyboards/meira/readme.md b/keyboards/meira/readme.md deleted file mode 100644 index 10c27ee94e..0000000000 --- a/keyboards/meira/readme.md +++ /dev/null @@ -1,31 +0,0 @@ -# Meira - - - -A 4x12 ortholinear low-profile keyboard. - -Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) -Hardware Supported: Meira/ProMicro, Meira/FeatherBLE -Hardware Availability: [WoodKeys.click](https://woodkeys.click/meira) - -Two controllers are support: the Pro Micro, and the Adafruit Feather BLE 32u4. Support for each is defined as a hardware revision subfolder in QMK. Main differences include processor frequencies and matrix pinouts. - -Make example for this keyboard (after setting up your build environment): - - make meira/promicro:default - -or - - make meira/featherble:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information on generic QMK configuration and setup. - -Both the Pro Micro and the Feather BLE use the Catalina bootloader, which is typically programmed using avrdude. - -## Matrix - -In order to have enough pins for the matrix and other functions, a custom matrix is implemented using a demultiplexer to scan the columns. Since the demux is active low, the diodes must be oriented with the cathode connected to the demux pin. When looking at the bottom of the board with the controller at the top right, the cathode mark on the diode should be toward the left. - -## LED Controller - -The in-switch LEDs are driven by an ISSI LED controller (IS31FL3731). The micro controller communicates with this chip using I2C. Individual LED control is possible, but currently only general backlighting support is implemented. This functionality is located in lighting.c, issi.c, and TWILib.c.
\ No newline at end of file diff --git a/keyboards/meira/rules.mk b/keyboards/meira/rules.mk deleted file mode 100644 index 6c2472f433..0000000000 --- a/keyboards/meira/rules.mk +++ /dev/null @@ -1,79 +0,0 @@ -SRC += matrix.c TWIlib.c issi.c lighting.c - -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -BACKLIGHT_CUSTOM_DRIVER = yes -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Miera -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled - -CUSTOM_MATRIX = yes - -#ifeq ($(strip $(ISSI_ENABLE)), yes) -# TMK_COMMON_DEFS += -DISSI_ENABLE -#endif -# -#ifeq ($(strip $(WATCHDOG_ENABLE)), yes) -# TMK_COMMON_DEFS += -DWATCHDOG_ENABLE -#endif - -DEFAULT_FOLDER = meira/promicro -LAYOUTS = ortho_4x12 |