diff options
Diffstat (limited to 'keyboards/mechmini/readme.md')
| -rw-r--r-- | keyboards/mechmini/readme.md | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/keyboards/mechmini/readme.md b/keyboards/mechmini/readme.md new file mode 100644 index 0000000000..b95153051c --- /dev/null +++ b/keyboards/mechmini/readme.md @@ -0,0 +1,64 @@ +mechmini +======== + +A compact ortholinear/staggered keyboard. + +Keyboard Maintainer: QMK Community +Hardware Supported: mechmini PCB +Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0-pcb + +Make example for this keyboard (after setting up your build environment): + + make mechmini:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +## Mechmini Notes + +Note that this is a complete replacement for the firmware, so you won't be +using Bootmapper Client to change any keyboard settings, since not all the +USB report options are supported. + +## Installing + +First, install the requirements. These commands are for OSX, but all you +need is the AVR toolchain and `bootloadHID` for flashing: + +``` +$ brew cask install crosspack-avr +$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb +``` + +In order to use the `./program` script, which can reboot the board into +the bootloader, you'll need Python 2 with PyUSB installed: + +``` +$ pip install pyusb +``` + +Then, with the keyboard plugged in, simply run this command from the +`qmk_firmware` directory: + +``` +$ make mechmini:program +``` + +If you prefer, you can just build it and flash the firmware directly with +`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it +in the bootloader: + +``` +$ make mechmini +$ bootloadHID -r mechmini_default.hex +``` + +## Troubleshooting + +From my experience, it's really hard to brick these boards. But these +tricks have been useful when it got stuck in a weird scenario. + +1. Try plugging the board in while pressing `L_Ctrl`. This will force it + to boot only the bootloader without loading the firmware. Once this is + done, just reflash the board with the original firmware. +2. Sometimes USB hubs can act weird, so try connecting the board directly + to your computer or plugging/unplugging the USB hub. |