4 files changed, 34 insertions, 24 deletions
diff --git a/keyboards/massdrop/alt/alt.h b/keyboards/massdrop/alt/alt.h
index 0396095450..c3761bee8b 100644
--- a/keyboards/massdrop/alt/alt.h
+++ b/keyboards/massdrop/alt/alt.h
@@ -7,7 +7,7 @@
 #include "i2c_master.h"
 #include "md_rgb_matrix.h" //For led keycodes
 #include "usb/udi_cdc.h"
-#include "usb/usb2422.h"
+#include "usb/usb_hub.h"
 
 #define LAYOUT_65_ansi_blocker( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \
diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h
index d28094c492..c37949a74b 100644
--- a/keyboards/massdrop/alt/config.h
+++ b/keyboards/massdrop/alt/config.h
@@ -50,22 +50,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* This Shift Register expands available hardware output lines to control additional peripherals */
 /* It uses four lines from the MCU to provide 16 output lines */
 /* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
-#define SR_EXP_RCLK_PORT            PB
-#define SR_EXP_RCLK_PIN             14
+#define SR_EXP_RCLK_PIN          B14
 /* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
-#define SR_EXP_OE_N_PORT            PB
-#define SR_EXP_OE_N_PIN             15
+#define SR_EXP_OE_PIN            B15
 /* SERCOM port to use for Shift Register SPI */
 /* DATAOUT and SCLK must be configured to use hardware pins of this port */
-#define SR_EXP_SERCOM               SERCOM2
+#define SPI_SERCOM               SERCOM2
 /* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
-#define SR_EXP_DATAOUT_PORT         PA
-#define SR_EXP_DATAOUT_PIN          12
-#define SR_EXP_DATAOUT_MUX          2
+#define SPI_DATAOUT_PIN          A12
+#define SPI_DATAOUT_MUX          2
 /* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
-#define SR_EXP_SCLK_PORT            PA
-#define SR_EXP_SCLK_PIN             13
-#define SR_EXP_SCLK_MUX             2
+#define SPI_SCLK_PIN             A13
+#define SPI_SCLK_MUX             2
 
 /* Debug LED (Small LED Located near MCU) */
 #define DEBUG_LED_ENABLE            1
@@ -94,6 +90,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEBUG_BOOT_TRACING_PORT     PB
 #define DEBUG_BOOT_TRACING_PIN      23
 
+/* USB2422 config */
+#define USB2422_ADDRESS 0x58
+#define USB2422_VENDOR_ID 0x04D8
+#define USB2422_PRODUCT_ID 0xEEC5
+#define USB2422_DEVICE_VER 0x0101
+#define USB2422_MANUFACTURER "Massdrop Inc."
+#define USB2422_PRODUCT "Massdrop Hub"
+#define USB2422_ACTIVE_PIN A18
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h
index 3dbd9b8877..fe8b600234 100644
--- a/keyboards/massdrop/ctrl/config.h
+++ b/keyboards/massdrop/ctrl/config.h
@@ -49,22 +49,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* This Shift Register expands available hardware output lines to control additional peripherals */
 /* It uses four lines from the MCU to provide 16 output lines */
 /* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
-#define SR_EXP_RCLK_PORT            PB
-#define SR_EXP_RCLK_PIN             14
+#define SR_EXP_RCLK_PIN          B14
 /* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
-#define SR_EXP_OE_N_PORT            PB
-#define SR_EXP_OE_N_PIN             15
+#define SR_EXP_OE_PIN            B15
 /* SERCOM port to use for Shift Register SPI */
 /* DATAOUT and SCLK must be configured to use hardware pins of this port */
-#define SR_EXP_SERCOM               SERCOM2
+#define SPI_SERCOM               SERCOM2
 /* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
-#define SR_EXP_DATAOUT_PORT         PA
-#define SR_EXP_DATAOUT_PIN          12
-#define SR_EXP_DATAOUT_MUX          2
+#define SPI_DATAOUT_PIN          A12
+#define SPI_DATAOUT_MUX          2
 /* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
-#define SR_EXP_SCLK_PORT            PA
-#define SR_EXP_SCLK_PIN             13
-#define SR_EXP_SCLK_MUX             2
+#define SPI_SCLK_PIN             A13
+#define SPI_SCLK_MUX             2
 
 /* Debug LED (Small LED Located near MCU) */
 #define DEBUG_LED_ENABLE            1
@@ -93,6 +89,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEBUG_BOOT_TRACING_PORT     PB
 #define DEBUG_BOOT_TRACING_PIN      23
 
+/* USB2422 config */
+#define USB2422_ADDRESS 0x58
+#define USB2422_VENDOR_ID 0x04D8
+#define USB2422_PRODUCT_ID 0xEEC5
+#define USB2422_DEVICE_VER 0x0101
+#define USB2422_MANUFACTURER "Massdrop Inc."
+#define USB2422_PRODUCT "Massdrop Hub"
+#define USB2422_ACTIVE_PIN A18
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
diff --git a/keyboards/massdrop/ctrl/ctrl.h b/keyboards/massdrop/ctrl/ctrl.h
index 1650beb9a4..a3d66ba775 100644
--- a/keyboards/massdrop/ctrl/ctrl.h
+++ b/keyboards/massdrop/ctrl/ctrl.h
@@ -7,7 +7,7 @@
 #include "i2c_master.h"
 #include "md_rgb_matrix.h" //For led keycodes
 #include "usb/udi_cdc.h"
-#include "usb/usb2422.h"
+#include "usb/usb_hub.h"
 
 #define LAYOUT( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \