summaryrefslogtreecommitdiff
path: root/keyboards/kinesis/stapelberg
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/kinesis/stapelberg')
-rw-r--r--keyboards/kinesis/stapelberg/config.h44
-rw-r--r--keyboards/kinesis/stapelberg/readme.md53
-rw-r--r--keyboards/kinesis/stapelberg/rules.mk5
-rw-r--r--keyboards/kinesis/stapelberg/stapelberg.c61
-rw-r--r--keyboards/kinesis/stapelberg/stapelberg.h104
5 files changed, 0 insertions, 267 deletions
diff --git a/keyboards/kinesis/stapelberg/config.h b/keyboards/kinesis/stapelberg/config.h
deleted file mode 100644
index 321aec5eb2..0000000000
--- a/keyboards/kinesis/stapelberg/config.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef STAPELBERG_CONFIG_H
-#define STAPELBERG_CONFIG_H
-
-#include "../config.h"
-
-/* USB Device descriptor parameter */
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0002
-
-/* key matrix size */
-#define MATRIX_ROWS 15
-#define MATRIX_COLS 7
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C0, C1, C2, C3, C4, C5, C6 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* don't know if this should be defined at the board or top level. Assuming board
-#define MOUSEKEY_DELAY 100
-#define MOUSEKEY_INTERVAL 20
-#define MOUSEKEY_MAX_SPEED 3
-#define MOUSEKEY_TIME_TO_MAX 10
-*/
-
-#define IGNORE_MOD_TAP_INTERRUPT
-
-#endif
diff --git a/keyboards/kinesis/stapelberg/readme.md b/keyboards/kinesis/stapelberg/readme.md
deleted file mode 100644
index 37b26623f2..0000000000
--- a/keyboards/kinesis/stapelberg/readme.md
+++ /dev/null
@@ -1,53 +0,0 @@
-# kinesis_stapelberg keyboard firmware
-
-This folder contains the firmware customization required to run QMK on the custom controller for the Kinesis Advantage created by Michael Stapelberg.
-It differs from the `alvicstep` keyboard in that the existing QMK Kinesis Advantage project uses the existing controller board provided by Kinesis.
-
-The controller board hardware is described
-[here](http://michael.stapelberg.de/Artikel/kinesis_custom_controller)
-
-Mapping the pin assignments was done using the corresponding matrix description provided at this
-[link](https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec)
-
-This code makes no attempt to drive the four LEDs provided on the controller board.
-
-
-## Building the Hardware
-
-If you want to perform this customization, these parts may be helpful.
-
-| Function | Quantity | Vendor | Part Number |
-| ------------------------------------------------------ | -------- | ------- | ------------ |
-| 13 pin connector for function keys and finger keywells | 4 | Digi-Key | WM14526-ND |
-| 10 pin headers for thumb clusters | 4 | Digi-Key | 609-3250-ND |
-| 8 pin cable for thumb clusters | 2 | Digi-Key | SAM8928-ND |
-| Teensy++ 2.0 | 1 | Digi-Key | 1528-1056-ND |
-| 2 pin right angle header for reset | 1 | Digi-Key | 3M9467-ND |
-| Reset cables | 2 | Sparkfun | PRT-09140 |
-
-The board and connections are shown here
-![controller board](https://i.imgur.com/2ZPMwvZ.jpg)
-
-The Teensy mounting detail can be seen here.
-I used a socket for prototyping.
-![teensy detail](https://i.imgur.com/HrkGUjc.jpg)
-
-
-Since the proper mounting of the Teensy board places the reset button in a tight space, I added a 2-pin header to the reset and ground pins on the edge of the board.
-Shorting these two pins together will reset the board.
-I also put female to male header jumper cables on these so they could be accessed outside the enclosure.
-The exterior cables can be seen here.
-![exterior reset](https://i.imgur.com/JNoxI40.jpg)
-
-
-## Keymaps
-
-### Default
-
-To build with the default keymap, run `make kinesis/stapelberg` while in the QMK directory.
-
-### Dvorak
-
-This keymap contains a dvorak implementation as well as media and symbol layers.
-
-Run `make kinesis/stapelberg:dvorak` while in the QMK directory.
diff --git a/keyboards/kinesis/stapelberg/rules.mk b/keyboards/kinesis/stapelberg/rules.mk
deleted file mode 100644
index 3f2ff2d6cc..0000000000
--- a/keyboards/kinesis/stapelberg/rules.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-
-
-
-
-
diff --git a/keyboards/kinesis/stapelberg/stapelberg.c b/keyboards/kinesis/stapelberg/stapelberg.c
deleted file mode 100644
index af407ac4fc..0000000000
--- a/keyboards/kinesis/stapelberg/stapelberg.c
+++ /dev/null
@@ -1,61 +0,0 @@
-#include "stapelberg.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- // * Set our LED pins as output
- DDRF |= (1<<0); // Keypad LED
- DDRF |= (1<<1); // ScrLock LED
- DDRF |= (1<<2); // NumLock LED
- DDRF |= (1<<3); // CapsLock LED
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_init_ports() {
- // * Set our LED pins as output
- DDRF |= (1<<0); // Keypad LED
- DDRF |= (1<<1); // ScrLock LED
- DDRF |= (1<<2); // NumLock LED
- DDRF |= (1<<3); // CapsLock LED
-}
-
-void led_set_kb(uint8_t usb_led) {
- if (usb_led & (1<<USB_LED_COMPOSE)) {
- PORTF &= ~(1<<0);
- } else {
- PORTF |= (1<<0);
- }
-
- if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
- PORTF &= ~(1<<1);
- } else {
- PORTF |= (1<<1);
- }
-
- if (usb_led & (1<<USB_LED_NUM_LOCK)) {
- PORTF &= ~(1<<2);
- } else {
- PORTF |= (1<<2);
- }
-
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- PORTF &= ~(1<<3);
- } else {
- PORTF |= (1<<3);
- }
-}
diff --git a/keyboards/kinesis/stapelberg/stapelberg.h b/keyboards/kinesis/stapelberg/stapelberg.h
deleted file mode 100644
index e35e2f5db8..0000000000
--- a/keyboards/kinesis/stapelberg/stapelberg.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef KINESIS_STAPELBERG_H
-#define KINESIS_STAPELBERG_H
-
-#include "quantum.h"
-
-#define ___ KC_NO
-
-// This a shortcut to help you visually see your layout.
-// The first section contains all of the arguments as on the physical keyboard
-// The second converts the arguments into the 2-D scanned array
-
-#define LAYOUT( \
- kC0, kD0, kE0, kC1, kD1, kE1, kC2, kD2, kE2, \
- k00, k10, k20, k30, k40, k50, \
- k01, k11, k21, k31, k41, k51, \
- k02, k12, k22, k32, k42, k52, \
- k03, k13, k23, k33, k43, k53, \
- k14, k24, k34, k54, \
- k56, k55, \
- k35, \
- k36, k46, k25, \
- \
- kC3, kD3, kE3, kC4, kD4, kE4, kC5, kE5, kD5, \
- k60, k70, k80, k90, kA0, kB0, \
- k61, k71, k81, k91, kA1, kB1, \
- k62, k72, k82, k92, kA2, kB2, \
- k63, k73, k83, k93, kA3, kB3, \
- k64, k84, k94, kA4, \
- k96, k85, \
- k86, \
- k66, k75, k65 \
-) { \
- { k00, k01, k02, k03, ___, ___, ___ }, \
- { k10, k11, k12, k13, k14, ___, ___ }, \
- { k20, k21, k22, k23, k24, k25, ___ }, \
- { k30, k31, k32, k33, k34, k35, k36 }, \
- { k40, k41, k42, k43, ___, ___, k46 }, \
- { k50, k51, k52, k53, k54, k55, k56 }, \
- { k60, k61, k62, k63, k64, k65, k66 }, \
- { k70, k71, k72, k73, ___, k75, ___ }, \
- { k80, k81, k82, k83, k84, k85, k86 }, \
- { k90, k91, k92, k93, k94, ___, k96 }, \
- { kA0, kA1, kA2, kA3, kA4, ___, ___ }, \
- { kB0, kB1, kB2, kB3, ___, ___, ___ }, \
- { kC0, kC1, kC2, kC3, kC4, kC5, ___ }, \
- { kD0, kD1, kD2, kD3, kD4, kD5, ___ }, \
- { kE0, kE1, kE2, kE3, kE4, kE5, ___ } \
-}
-
-/* ---------------- LEFT HAND ----------------- ---------------- RIGHT HAND ---------------- */
-#define LAYOUT_pretty( \
- kC0, kD0, kE0, kC1, kD1, kE1, kC2, kD2, kE2, kC3, kD3, kE3, kC4, kD4, kE4, kC5, kE5, kD5, \
- k00, k10, k20, k30, k40, k50, k60, k70, k80, k90, kA0, kB0, \
- k01, k11, k21, k31, k41, k51, k61, k71, k81, k91, kA1, kB1, \
- k02, k12, k22, k32, k42, k52, k62, k72, k82, k92, kA2, kB2, \
- k03, k13, k23, k33, k43, k53, k63, k73, k83, k93, kA3, kB3, \
- k14, k24, k34, k54, k64, k84, k94, kA4, \
- k56, k55, k96, k85, \
- k35, k86, \
- k36, k46, k25, k66, k75, k65 \
-) { \
- { k00, k01, k02, k03, ___, ___, ___ }, \
- { k10, k11, k12, k13, k14, ___, ___ }, \
- { k20, k21, k22, k23, k24, k25, ___ }, \
- { k30, k31, k32, k33, k34, k35, k36 }, \
- { k40, k41, k42, k43, ___, ___, k46 }, \
- { k50, k51, k52, k53, k54, k55, k56 }, \
- { k60, k61, k62, k63, k64, k65, k66 }, \
- { k70, k71, k72, k73, ___, k75, ___ }, \
- { k80, k81, k82, k83, k84, k85, k86 }, \
- { k90, k91, k92, k93, k94, ___, k96 }, \
- { kA0, kA1, kA2, kA3, kA4, ___, ___ }, \
- { kB0, kB1, kB2, kB3, ___, ___, ___ }, \
- { kC0, kC1, kC2, kC3, kC4, kC5, ___ }, \
- { kD0, kD1, kD2, kD3, kD4, kD5, ___ }, \
- { kE0, kE1, kE2, kE3, kE4, kE5, ___ } \
-}
-
-/*
-This is the Stapelberg matrix as published at
-https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec
-Along with the pins for each row and column
- PB0 PB1 PB2 PB3 PB4 PB5 PB6
- kx0 kx1 kx2 kx3 kx4 kx5 kx6
-PD0 k0x Row: EQL TAB CAP LSH X2 -- --
-PD1 k1x Row: 1 Q A Z BQ -- --
-PD2 k2x Row: 2 W S X INS END --
-PD3 k3x Row: 3 E D C LFT HOM BAK
-PD4 k4x Row: 4 R F V -- -- DEL
-PD5 k5x Row: 5 T G B RT LAL LCT
-PD6 k6x Row: 6 Y H N UP SPC PGD
-PD7 k7x Row: 7 U J M -- RET --
-PC0 k8x Row: 8 I K COM DWN RCT PGU
-PC1 k9x Row: 9 O L PER LBR -- RAL
-PC2 kAx Row: 0 P SEM SLA RBR -- --
-PC3 kBx Row: MIN BSL APO RSH X1 -- --
-PC4 kCx Row: ESC F3 F6 F9 F12 PAU --
-PC5 kDx Row: F1 F4 F7 F10 PRT PRG --
-PC6 kEx Row: F2 F5 F8 F11 SLK KEY --
-*/
-
-
-
-#endif