summaryrefslogtreecommitdiff
path: root/keyboards/kinesis/kintlc/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/kinesis/kintlc/config.h')
-rw-r--r--keyboards/kinesis/kintlc/config.h114
1 files changed, 114 insertions, 0 deletions
diff --git a/keyboards/kinesis/kintlc/config.h b/keyboards/kinesis/kintlc/config.h
new file mode 100644
index 0000000000..8e15fea479
--- /dev/null
+++ b/keyboards/kinesis/kintlc/config.h
@@ -0,0 +1,114 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#undef VENDOR_ID
+#define VENDOR_ID 0x1209
+#undef PRODUCT_ID
+#define PRODUCT_ID 0x345C
+#undef DEVICE_VER
+#define DEVICE_VER 0x0001
+#undef MANUFACTURER
+#define MANUFACTURER "https://github.com/stapelberg"
+#undef PRODUCT
+#define PRODUCT "kinT (kintlc)"
+
+/* key matrix size */
+#define MATRIX_ROWS 15
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS \
+ { \
+ LINE_PIN8, /* ROW_EQL */ \
+ LINE_PIN9, /* ROW_1 */ \
+ LINE_PIN10, /* ROW_2 */ \
+ LINE_PIN11, /* ROW_3 */ \
+ LINE_PIN7, /* ROW_4 */ \
+ LINE_PIN16, /* ROW_5 */ \
+ LINE_PIN5, /* ROW_6 */ \
+ LINE_PIN3, /* ROW_7 */ \
+ LINE_PIN4, /* ROW_8 */ \
+ LINE_PIN1, /* ROW_9 */ \
+ LINE_PIN0, /* ROW_0 */ \
+ LINE_PIN2, /* ROW_MIN */ \
+ LINE_PIN17, /* ROW_ESC */ \
+ LINE_PIN23, /* ROW_F1 */ \
+ LINE_PIN21 /* ROW_F2 */ \
+ }
+
+#define MATRIX_COL_PINS \
+ { \
+ LINE_PIN18, /* COL_0 */ \
+ LINE_PIN14, /* COL_1 */ \
+ LINE_PIN15, /* COL_2 */ \
+ LINE_PIN20, /* COL_3 */ \
+ LINE_PIN22, /* COL_4 */ \
+ LINE_PIN19, /* COL_5 */ \
+ LINE_PIN6 /* COL_6 */ \
+ }
+
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Well-worn Cherry MX key switches can bounce for up to 20ms, despite the
+ * Cherry data sheet specifying 5ms. Because we use the sym_eager_pk debounce
+ * algorithm, this debounce latency only affects key releases (not key
+ * presses). */
+#undef DEBOUNCE
+#define DEBOUNCE 20
+
+#define IGNORE_MOD_TAP_INTERRUPT
+
+// The Teensy LC power consumption is unknown as per
+// https://www.pjrc.com/store/teensylc.html but since
+// https://www.pjrc.com/store/teensy41.html says 100mA, let's go with half.
+#define USB_MAX_POWER_CONSUMPTION 50
+
+/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the
+ * AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock,
+ * i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information.
+ * No additional delay is necessary. */
+
+// in clock cycles
+#define GPIO_INPUT_PIN_DELAY 0
+
+// The default "1" results in LEDs being on when they should be off and
+// the other way around.
+#define LED_PIN_ON_STATE 0
+
+// Discussion about which Teensy LC pins can be used for driving staus LEDs:
+// https://github.com/kinx-project/kint/issues/55
+// Discussion about using Neopixel LEDs:
+// https://github.com/kinx-project/kint/issues/32
+// Available pins can be seen in:
+// /lib/chibios-contrib/os/hal/boards/PJRC_TEENSY_LC/board.h
+#define LED_CAPS_LOCK_PIN LINE_PIN12
+#define LED_SCROLL_LOCK_PIN LINE_PIN25
+#define LED_COMPOSE_PIN LINE_PIN24