diff options
Diffstat (limited to 'keyboards/keebio/iris/keymaps/two_knob/keymap.c')
| -rw-r--r-- | keyboards/keebio/iris/keymaps/two_knob/keymap.c | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/keyboards/keebio/iris/keymaps/two_knob/keymap.c b/keyboards/keebio/iris/keymaps/two_knob/keymap.c new file mode 100644 index 0000000000..aeeb2df905 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/two_knob/keymap.c @@ -0,0 +1,261 @@ +// Copyright 2022 Ryan Neff (@JellyTitan) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +enum custom_layers { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +/* Defines macros for use with the configurators "Any" key. (These are non-standard macros). */ +/* Move active application right half. */ +#define KC_CSGRA LCTL(LSFT(LGUI(KC_RGHT))) +/* Move active application to left half. */ +#define KC_CSGLA LCTL(LSFT(LGUI(KC_LEFT))) +/* Maximize active application. */ +#define KC_MAXIM LCTL(LSFT(LGUI(KC_UP))) +/* Minimize active application. */ +#define KC_MINIM LCTL(LSFT(LGUI(KC_DOWN))) + +/* Rotary encoder variables used to hold down Command (GUI) key while cycling through open programs. */ +bool is_cmd_tab_active = false; +uint16_t cmd_tab_timer = 0; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, + CMD_TAB_CW, + CMD_TAB_CCW, +}; + +/** + * Tap Dance declarations + */ +enum tapdances { + _TD_FIVE_ENTER, +}; + +/* Tapdance */ +#define TD_FIVE_ENTER TD(_TD_FIVE_ENTER) + +/** + * Tap Dance definitions + * + * NOTE - if your not using tapdance, comment out: + * TAP_DANCE_ENABLE = yes in rules.mk + * define TAPPING_TERM 175 in config.h + * else you'll get a compile error. + * + * To use this in the configurator, enter the name 'TD_FIVE_ENTER' in the "Any" key. + */ +qk_tap_dance_action_t tap_dance_actions[] = { + /* Tap once for 5, twice for Enter. */ + [_TD_FIVE_ENTER] = ACTION_TAP_DANCE_DOUBLE(KC_5, KC_ENT), +}; + +/** + * Keymap. Generated via configurator. + * + * You can download/upload the two_know.json to the configurator: + * https://config.qmk.fm/#/keebio/iris/rev6a/LAYOUT + * + * If you make changes and download the json, you can run qmk json2c two_knob.json to get converted text. + * You can copy and paste it here. + * You will have to reneame the array keys from ints to the custom keycode names. + * + * The rotary encoders are programmed manually below because the configurator does not support them yet. + */ +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT(KC_EQL, KC_1, KC_2, KC_3, KC_4, TD_FIVE_ENTER, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, LT(1, KC_DEL), LT(2, KC_A), LCTL_T(KC_S), KC_D, LGUI_T(KC_F), KC_G, KC_H, RGUI_T(KC_J), KC_K, RCTL_T(KC_L), LT(2, KC_SCLN), LT(1, KC_QUOT), KC_LSPO, LALT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_MINIM, KC_MAXIM, KC_N, KC_M, KC_COMM, KC_DOT, RALT_T(KC_SLSH), KC_RSPC, QK_GESC, KC_SPC, KC_BSPC, KC_TAB, KC_ENT, KC_DEL), + [_LOWER] = LAYOUT(KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, DT_PRNT, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, KC_TRNS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, DT_UP, KC_4, KC_5, KC_6, KC_PPLS, KC_TRNS, KC_TRNS, KC_HASH, KC_DLR, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, DT_DOWN, KC_1, KC_2, KC_3, KC_PSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0), + [_RAISE] = LAYOUT(RGB_TOG, KC_ACL0, KC_ACL1, KC_ACL2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_UP, KC_BTN2, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_CSGLA, KC_CSGRA, KC_TRNS, KC_TRNS), + [_ADJUST] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + _______, _______, _______, _______, _______, _______ + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + case CMD_TAB_CW: + if (record->event.pressed) { + if (!is_cmd_tab_active) { + is_cmd_tab_active = true; + register_code(KC_LGUI); + } + cmd_tab_timer = timer_read(); + register_code(KC_TAB); + } else { + unregister_code(KC_TAB); + } + break; + case CMD_TAB_CCW: + if (record->event.pressed) { + if (!is_cmd_tab_active) { + is_cmd_tab_active = true; + register_code(KC_LGUI); + } + cmd_tab_timer = timer_read(); + tap_code16(S(KC_TAB)); + } else { + unregister_code(KC_TAB); + } + break; + } + return true; +} + +/** + * Define lighting layers. + * + * Iris rev6a uses WS2812 RGB Matrix lighting. + * The RGB Matrix lighting option has already been enabled in ../../rev6a/config.h + * You'll need to add #define SPLIT_LAYER_STATE_ENABLE to config.h if you + * will be customizing the LED's per key. + * + * Here's how to customize the colors per layer and per key: + * https://github.com/qmk/qmk_firmware/blob/master/docs/feature_rgb_matrix.md#direct-operation-iddirect-operation + * + * If you start getting real weird with it, your likely to exceed the firmware limit of 28672. + * You may need to selectively disable some effects: + * https://github.com/qmk/qmk_firmware/blob/master/docs/feature_rgb_matrix.md#rgb-matrix-effects-idrgb-matrix-effects + * + * There are 68 Leds. Printed on the board itself, the led numbers are 1-68. + * For color addressing, use 0-67 as the index number. + * rgb_matrix_set_color(index, r, g, b) + * + * Here's an LED number guide: + * FRONT + * Left Hand Right Hand + * |00|01|02|03|04|05| |39|38|37|36|35|34| + * |11|10|09|08|07|06| |40|41|42|43|44|45| + * |12|13|14|15|16|17| |51|50|49|48|47|46| + * |23|22|21|20|19|18|27| |61|52|53|54|55|56|57| + * |24|25|26| |60|59|58| + * REVERSE + * Right Hand Left Hand + * |65|--|--|66|--|67| |33|--|32|--|--|31| + * |--|--|--|--|--|--| |--|--|--|--|--|--| + * |--|--|--|--|--|--| |--|--|--|--|--|--| + * |64|--|--|63|--|--|--| |--|--|--|29|--|--|30| + * |--|62|--| |--|28|--| + */ +// void rgb_matrix_indicators_user(void) { +// if (IS_LAYER_ON(1)) { +// /* Upperleft most key red: */ +// rgb_matrix_set_color(0,255,0,0); +// /* Upperright most front key blue: */ +// rgb_matrix_set_color(0,0,255,0); +// /* Bottom right on lefthand Green: */ +// rgb_matrix_set_color(0, RGB_GREEN); +// } +// else if (IS_LAYER_ON(2)) { +// /* RGB +/- controls. */ +// rgb_matrix_set_color(35, RGB_RED); +// rgb_matrix_set_color(34, RGB_BLUE); +// rgb_matrix_set_color(37, RGB_RED); +// rgb_matrix_set_color(36, RGB_BLUE); +// rgb_matrix_set_color(44, RGB_RED); +// rgb_matrix_set_color(45, RGB_BLUE); +// rgb_matrix_set_color(47, RGB_RED); +// rgb_matrix_set_color(46, RGB_BLUE); +// rgb_matrix_set_color(56, RGB_RED); +// rgb_matrix_set_color(57, RGB_BLUE); +// /* RGB Toggle. */ +// rgb_matrix_set_color(00, RGB_PURPLE); +// /* Move screen left/right. */ +// rgb_matrix_set_color(26, RGB_YELLOW); +// rgb_matrix_set_color(60, RGB_YELLOW); +// /* Arrow keys. */ +// rgb_matrix_set_color(50, RGB_PURPLE); +// rgb_matrix_set_color(49, RGB_PURPLE); +// rgb_matrix_set_color(48, RGB_PURPLE); +// rgb_matrix_set_color(42, RGB_PURPLE); +// /* Mouse movement arrows. */ +// rgb_matrix_set_color(14, RGB_ORANGE); +// rgb_matrix_set_color(15, RGB_ORANGE); +// rgb_matrix_set_color(16, RGB_ORANGE); +// rgb_matrix_set_color(8, RGB_ORANGE); +// /* Mouse buttons. */ +// rgb_matrix_set_color(41, RGB_ORANGE); +// rgb_matrix_set_color(43, RGB_ORANGE); +// /* Mouse acceleration. */ +// rgb_matrix_set_color(01, 200, 165, 0); +// rgb_matrix_set_color(02, 255, 200, 0); +// rgb_matrix_set_color(03, 255, 235, 0); +// } +// } + +/** + * Rotary Encoder. + * + * This can't be programmed through configurator. You must do it here. + * + * This uses the amazing "Encoder map" feature which replicates the normal keyswitch layer handling functionality, but with encoders. + * https://docs.qmk.fm/#/feature_encoders?id=encoder-map + * + * Uses a variant of the Super-alt-tab macro to switch between open applications on a mac. (Command-tab) + * https://docs.qmk.fm/#/feature_macros?id=super-alt%e2%86%aftab + */ +#if defined(ENCODER_MAP_ENABLE) + const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + /* Left Hand */ /* Right Hand */ + /* Switch between tabs. (Control + Tab). */ /* Switch between open apps on Mac. (Command + Tab + timer logic) */ + [_QWERTY] = { ENCODER_CCW_CW(S(C(KC_TAB)), C(KC_TAB)), ENCODER_CCW_CW(CMD_TAB_CCW, CMD_TAB_CW) }, + /* Scrolls left & right. (Shift + Mouse Wheel Up). */ /* Scrolls up and down. (Page Down & Page Up - mouse wheel scroll incraments are too small) */ + [_LOWER] = { ENCODER_CCW_CW(S(KC_MS_WH_UP), S(KC_MS_WH_DOWN)), ENCODER_CCW_CW(KC_PGDN, KC_PGUP) }, + /* Selects adjacent words. (Command + Shift + Right Arrow). */ /* Jumps to end/start of line. Hold shift to select. (Gui + arrow). */ + [_RAISE] = { ENCODER_CCW_CW(C(S(KC_LEFT)), C(S(KC_RGHT))), ENCODER_CCW_CW(G(KC_LEFT), G(KC_RGHT)) }, + /* Scroll through RGB Modes */ /* Right & left arrow */ + [_ADJUST] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD), ENCODER_CCW_CW(KC_LEFT, KC_RGHT) }, + }; +#endif + + +/** + * Helper function for rotary encoder. + * + * If the timer has elapsed, the Command/Gui tab will be released. + * You can adjust the milliseconds to speed up the CMD key release. + */ +void matrix_scan_user(void) { + if (is_cmd_tab_active) { + if (timer_elapsed(cmd_tab_timer) > 900) { + unregister_code(KC_LGUI); + is_cmd_tab_active = false; + } + } +} |