summaryrefslogtreecommitdiff
path: root/keyboards/input_club/infinity60/led_controller.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/input_club/infinity60/led_controller.c')
-rw-r--r--keyboards/input_club/infinity60/led_controller.c487
1 files changed, 487 insertions, 0 deletions
diff --git a/keyboards/input_club/infinity60/led_controller.c b/keyboards/input_club/infinity60/led_controller.c
new file mode 100644
index 0000000000..cf3edf20dd
--- /dev/null
+++ b/keyboards/input_club/infinity60/led_controller.c
@@ -0,0 +1,487 @@
+/*
+Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
+Copyright 2017 jpetermans <tibcmhhm@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * LED controller code
+ * IS31FL3731C matrix LED driver from ISSI
+ * datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
+ */
+
+#include <ch.h>
+#include <hal.h>
+#include "print.h"
+#include "led.h"
+#include "host.h"
+
+#include "led_controller.h"
+
+#include "suspend.h"
+
+#include "usb_main.h"
+
+/* Infinity60 LED MAP
+ - digits mean "row" and "col", i.e. 45 means C4-5 in the IS31 datasheet, matrix A
+
+ 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
+ 28 31 32 33 34 35 36 37 38 41 42 43 44 45
+ 46 47 48 51 52 53 54 55 56 57 58 61 62
+ 63 64 65 66 67 68 71 72 73 74 75 76 77*
+ 78 81 82 83 84 85 86 87
+
+*Unused in Alphabet Layout
+*/
+
+/*
+ each page has 0xB4 bytes
+ 0 - 0x11: LED control (on/off):
+ order: CA1, CB1, CA2, CB2, .... (CA - matrix A, CB - matrix B)
+ CAn controls Cn-8 .. Cn-1 (LSbit)
+ 0x12 - 0x23: blink control (like "LED control")
+ 0x24 - 0xB3: PWM control: byte per LED, 0xFF max on
+ order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
+*/
+
+// Which LED should be used for CAPS LOCK indicator
+#if !defined(CAPS_LOCK_LED_ADDRESS)
+#define CAPS_LOCK_LED_ADDRESS 46
+#endif
+
+#if !defined(NUM_LOCK_LED_ADDRESS)
+#define NUM_LOCK_LED_ADDRESS 85
+#endif
+
+/* Which LED should breathe during sleep */
+#if !defined(BREATHE_LED_ADDRESS)
+#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS
+#endif
+
+/* =================
+ * ChibiOS I2C setup
+ * ================= */
+static const I2CConfig i2ccfg = {
+ 400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+/* ==============
+ * variables
+ * ============== */
+// internal communication buffers
+uint8_t tx[2] __attribute__((aligned(2)));
+uint8_t rx[1] __attribute__((aligned(2)));
+
+// buffer for sending the whole page at once (used also as a temp buffer)
+uint8_t full_page[0xB4+1] = {0};
+
+// LED mask (which LEDs are present, selected by bits)
+// IC60 pcb uses only CA matrix.
+// Each byte is a control pin for 8 leds ordered 8-1
+const uint8_t all_on_leds_mask[0x12] = {
+ 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
+ 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
+};
+
+// array to hold brightness pwm steps
+const uint8_t pwm_levels[5] = {
+ 0x00, 0x16, 0x4E, 0xA1, 0xFF
+};
+
+// array to write to pwm register
+uint8_t pwm_register_array[9] = {0};
+
+
+/* ============================
+ * communication functions
+ * ============================ */
+msg_t is31_select_page(uint8_t page) {
+ tx[0] = IS31_COMMANDREGISTER;
+ tx[1] = page;
+ return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, TIME_US2I(IS31_TIMEOUT));
+}
+
+msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size) {
+ is31_select_page(page);
+ return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, buffer, size, NULL, 0, TIME_US2I(IS31_TIMEOUT));
+}
+
+msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
+ is31_select_page(page);
+ tx[0] = reg;
+ tx[1] = data;
+ return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, TIME_US2I(IS31_TIMEOUT));
+}
+
+msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
+ is31_select_page(page);
+
+ tx[0] = reg;
+ return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, TIME_US2I(IS31_TIMEOUT));
+}
+
+/* ========================
+ * initialise the IS31 chip
+ * ======================== */
+void is31_init(void) {
+ // just to be sure that it's all zeroes
+ __builtin_memset(full_page,0,0xB4+1);
+ // zero function page, all registers (assuming full_page is all zeroes)
+ is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
+ // disable hardware shutdown
+ palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(GPIOB, 16);
+ chThdSleepMilliseconds(10);
+ // software shutdown
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+ chThdSleepMilliseconds(10);
+ // zero function page, all registers
+ is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
+ chThdSleepMilliseconds(10);
+ // software shutdown disable (i.e. turn stuff on)
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+ chThdSleepMilliseconds(10);
+ // zero all LED registers on all 8 pages
+ uint8_t i;
+ for(i=0; i<8; i++) {
+ is31_write_data(i, full_page, 0xB4 + 1);
+ chThdSleepMilliseconds(5);
+ }
+}
+
+/* ==================
+ * LED control thread
+ * ================== */
+#define LED_MAILBOX_NUM_MSGS 5
+static msg_t led_mailbox_queue[LED_MAILBOX_NUM_MSGS];
+mailbox_t led_mailbox;
+static THD_WORKING_AREA(waLEDthread, 256);
+static THD_FUNCTION(LEDthread, arg) {
+ (void)arg;
+ chRegSetThreadName("LEDthread");
+
+ uint8_t i;
+ uint8_t control_register_word[2] = {0};//2 bytes: register address, byte to write
+ uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
+
+ //persistent status variables
+ uint8_t pwm_step_status, page_status, capslock_status, numlock_status;
+
+ //mailbox variables
+ uint8_t temp, msg_type;
+ uint8_t msg_args[3];
+ msg_t msg;
+
+ // initialize persistent variables
+ pwm_step_status = 4; //full brightness
+ page_status = 0; //start frame 0 (all off/on)
+ numlock_status = (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? 1 : 0;
+ capslock_status = (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? 1 : 0;
+
+ while(true) {
+ // wait for a message (asynchronous)
+ // (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
+ // be processed right away
+ chMBFetchTimeout(&led_mailbox, &msg, TIME_INFINITE);
+ msg_type = msg & 0xFF; //first byte is action information
+ msg_args[0] = (msg >> 8) & 0xFF;
+ msg_args[1] = (msg >> 16) & 0XFF;
+ msg_args[2] = (msg >> 24) & 0xFF;
+
+
+ switch (msg_type){
+ case SET_FULL_ROW:
+ //write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
+ //writes only to currently displayed page
+ write_led_byte(page_status, msg_args[1], msg_args[0]);
+ break;
+
+ case OFF_LED:
+ //on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
+ set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
+ break;
+ case ON_LED:
+ set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
+ break;
+ case TOGGLE_LED:
+ set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
+ break;
+
+ case BLINK_OFF_LED:
+ //on/off/toggle single led, msg_args[0] = row/col of led
+ set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
+ break;
+ case BLINK_ON_LED:
+ set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
+ break;
+ case BLINK_TOGGLE_LED:
+ set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
+ break;
+
+ case TOGGLE_ALL:
+ //turn on/off all leds, msg_args = unused
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+ chThdSleepMilliseconds(5);
+ is31_read_register(0, 0x00, &temp);
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+
+ led_control_reg[0] = 0;
+
+ //toggle led mask based on current state (temp)
+ if (temp==0 || page_status > 0) {
+ __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
+ } else {
+ __builtin_memset(led_control_reg+1, 0, 0x12);
+ }
+ is31_write_data(0, led_control_reg, 0x13);
+
+ if (page_status > 0) {
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
+
+ page_status=0;
+
+ //maintain lock leds, reset to off and force recheck to blink of all leds toggled on
+ numlock_status = 0;
+ capslock_status = 0;
+ led_set(host_keyboard_leds());
+ }
+ break;
+
+ case TOGGLE_BACKLIGHT:
+ //msg_args[0] = on/off
+
+ //populate 9 byte rows to be written to each pin, first byte is register (pin) address
+ if (msg_args[0] == 1) {
+ __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
+ } else {
+ __builtin_memset(pwm_register_array+1, 0, 8);
+ }
+
+ for(i=0; i<8; i++) {
+ //first byte is register address, every 0x10 9 bytes is A-matrix pwm pins
+ pwm_register_array[0] = 0x24 + (i * 0x10);
+ is31_write_data(0,pwm_register_array,9);
+ }
+ break;
+
+ case DISPLAY_PAGE:
+ //msg_args[0] = page to toggle on
+ if (page_status != msg_args[0]) {
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
+ page_status = msg_args[0];
+
+ //maintain lock leds, reset to off and force recheck for new page
+ numlock_status = 0;
+ capslock_status = 0;
+ led_set(host_keyboard_leds());
+ }
+ break;
+
+ case RESET_PAGE:
+ //led_args[0] = page to reset
+ led_control_reg[0] = 0;
+ __builtin_memset(led_control_reg+1, 0, 0x12);
+ is31_write_data(msg_args[0], led_control_reg, 0x13);
+
+ //repeat for blink register
+ led_control_reg[0] = 0x12;
+ is31_write_data(msg_args[0], led_control_reg, 0x13);
+ break;
+
+ case TOGGLE_NUM_LOCK:
+ //msg_args[0] = 0 or 1, off/on
+ if (numlock_status != msg_args[0]) {
+ set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
+ numlock_status = msg_args[0];
+ }
+ break;
+ case TOGGLE_CAPS_LOCK:
+ //msg_args[0] = 0 or 1, off/on
+ if (capslock_status != msg_args[0]) {
+ set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
+ capslock_status = msg_args[0];
+ }
+ break;
+
+ case STEP_BRIGHTNESS:
+ //led_args[0] = step up (1) or down (0)
+ switch (msg_args[0]) {
+ case 0:
+ if (pwm_step_status == 0) {
+ pwm_step_status = 4;
+ } else {
+ pwm_step_status--;
+ }
+ break;
+
+ case 1:
+ if (pwm_step_status == 4) {
+ pwm_step_status = 0;
+ } else {
+ pwm_step_status++;
+ }
+ break;
+ }
+
+ //populate 8 byte arrays to write on each pin
+ //first byte is register address, every 0x10 9 bytes are A-matrix pwm pins
+ __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
+
+ for(i=0; i<8; i++) {
+ pwm_register_array[0] = 0x24 + (i * 0x10);
+ is31_write_data(0,pwm_register_array,9);
+ }
+ break;
+ }
+ }
+}
+
+/* ==============================
+ * led processing functions
+ * ============================== */
+
+void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uint8_t action) {
+ //returns 2 bytes: led control register address and byte to write
+ //action: 0 - off, 1 - on, 2 - toggle, 4 - blink on, 5 - blink off, 6 - toggle blink
+
+ uint8_t control_reg_addr, column_bit, column_byte, temp, blink_bit;
+
+ //check for valid led address
+ if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
+ return;
+ }
+
+ blink_bit = action>>2;//check for blink bit
+ action &= ~(1<<2); //strip blink bit
+
+ //led_addr tens column is pin#, ones column is bit position in 8-bit mask
+ control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
+ control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
+
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+ chThdSleepMilliseconds(5);
+ is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+
+ column_bit = 1<<(led_addr % 10 - 1);
+ column_byte = temp;
+
+ switch(action) {
+ case 0:
+ column_byte &= ~column_bit;
+ break;
+ case 1:
+ column_byte |= column_bit;
+ break;
+ case 2:
+ column_byte ^= column_bit;
+ break;
+ }
+
+ //return word to be written in register
+ led_control_word[0] = control_reg_addr;
+ led_control_word[1] = column_byte;
+ is31_write_data (page, led_control_word, 0x02);
+}
+
+void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
+ uint8_t led_control_word[2] = {0};//register address and on/off byte
+
+ led_control_word[0] = (row - 1 ) * 0x02;// A-matrix is every other byte
+ led_control_word[1] = led_byte;
+ is31_write_data(page, led_control_word, 0x02);
+}
+
+void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) {
+ uint8_t i;
+ uint8_t pin, col;
+ uint8_t led_control_register[0x13] = {0};
+
+ __builtin_memset(led_control_register,0,13);
+
+ for(i=0;i<led_count;i++){
+ //shift pin by 1 for led register 0x00 address
+ pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;
+ col = user_led_array[i] % 10 - 1;
+ led_control_register[pin] |= 1<<(col);
+ }
+
+ is31_write_data(page, led_control_register, 0x13);
+}
+
+void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
+ uint8_t temp;
+ uint8_t led_control_word[2] = {0};
+
+ //blink if all leds are on
+ if (page == 0) {
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+ chThdSleepMilliseconds(5);
+ is31_read_register(0, 0x00, &temp);
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+
+ if (temp == 0xFF) {
+ led_action |= (1<<2); //set blink bit
+ }
+ }
+
+ set_led_bit(page,led_control_word,led_addr,led_action);
+}
+
+/* =====================
+ * hook into user keymap
+ * ===================== */
+void led_controller_init(void) {
+ uint8_t i;
+
+ /* initialise I2C */
+ /* I2C pins */
+ palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+ palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+ /* start I2C */
+ i2cStart(&I2CD1, &i2ccfg);
+ // try high drive (from kiibohd)
+ I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+ // try glitch fixing (from kiibohd)
+ I2CD1.i2c->FLT = 4;
+
+ chThdSleepMilliseconds(10);
+
+ /* initialise IS31 chip */
+ is31_init();
+
+ //set Display Option Register so all pwm intensity is controlled from page 0
+ //enable blink and set blink period to 0.27s x rate
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + IS31_REG_DISPLAYOPT_BLINK_ENABLE + 4);
+
+ /* set full pwm on page 1 */
+ pwm_register_array[0] = 0;
+ __builtin_memset(pwm_register_array+1, 0xFF, 8);
+ for(i=0; i<8; i++) {
+ pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
+ is31_write_data(0, pwm_register_array, 9);
+ chThdSleepMilliseconds(5);
+ }
+
+ /* enable breathing when the displayed page changes */
+ // Fade-in Fade-out, time = 26ms * 2^N, N=3
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
+
+ /* more time consuming LED processing should be offloaded into
+ * a thread, with asynchronous messaging. */
+ chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
+ chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
+}