diff options
Diffstat (limited to 'keyboards/handwired')
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/chconf.h | 700 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/config.h | 253 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/halconf.h | 524 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/info.json | 12 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/keymaps/default/keymap.c | 28 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/mcuconf.h | 45 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/readme.md | 18 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/rules.mk | 28 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/tp69.c | 18 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/tp69.h | 48 | ||||
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/twadlee-tp69-kle.json | 139 |
12 files changed, 1814 insertions, 0 deletions
diff --git a/keyboards/handwired/twadlee/tp69/chconf.h b/keyboards/handwired/twadlee/tp69/chconf.h new file mode 100644 index 0000000000..f1640bb199 --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/chconf.h @@ -0,0 +1,700 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +# define CHCONF_H + +# define _CHIBIOS_RT_CONF_ +# define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +# if !defined(CH_CFG_ST_RESOLUTION) +# define CH_CFG_ST_RESOLUTION 32 +# endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +# if !defined(CH_CFG_ST_FREQUENCY) +# define CH_CFG_ST_FREQUENCY 1000 +# endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +# if !defined(CH_CFG_INTERVALS_SIZE) +# define CH_CFG_INTERVALS_SIZE 32 +# endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +# if !defined(CH_CFG_TIME_TYPES_SIZE) +# define CH_CFG_TIME_TYPES_SIZE 32 +# endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +# if !defined(CH_CFG_ST_TIMEDELTA) +# define CH_CFG_ST_TIMEDELTA 0 +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +# if !defined(CH_CFG_TIME_QUANTUM) +# define CH_CFG_TIME_QUANTUM 20 +# endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +# if !defined(CH_CFG_MEMCORE_SIZE) +# define CH_CFG_MEMCORE_SIZE 0 +# endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +# if !defined(CH_CFG_NO_IDLE_THREAD) +# define CH_CFG_NO_IDLE_THREAD FALSE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_OPTIMIZE_SPEED) +# define CH_CFG_OPTIMIZE_SPEED TRUE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_TM) +# define CH_CFG_USE_TM FALSE +# endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_REGISTRY) +# define CH_CFG_USE_REGISTRY TRUE +# endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_WAITEXIT) +# define CH_CFG_USE_WAITEXIT TRUE +# endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_SEMAPHORES) +# define CH_CFG_USE_SEMAPHORES TRUE +# endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +# if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +# define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +# endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_MUTEXES) +# define CH_CFG_USE_MUTEXES TRUE +# endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +# if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +# define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +# endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +# if !defined(CH_CFG_USE_CONDVARS) +# define CH_CFG_USE_CONDVARS TRUE +# endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +# if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +# define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +# endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_EVENTS) +# define CH_CFG_USE_EVENTS TRUE +# endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +# if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +# define CH_CFG_USE_EVENTS_TIMEOUT TRUE +# endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_MESSAGES) +# define CH_CFG_USE_MESSAGES TRUE +# endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +# if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +# define CH_CFG_USE_MESSAGES_PRIORITY FALSE +# endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +# if !defined(CH_CFG_USE_MAILBOXES) +# define CH_CFG_USE_MAILBOXES TRUE +# endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_MEMCORE) +# define CH_CFG_USE_MEMCORE TRUE +# endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +# if !defined(CH_CFG_USE_HEAP) +# define CH_CFG_USE_HEAP TRUE +# endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_MEMPOOLS) +# define CH_CFG_USE_MEMPOOLS TRUE +# endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_OBJ_FIFOS) +# define CH_CFG_USE_OBJ_FIFOS TRUE +# endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +# if !defined(CH_CFG_USE_PIPES) +# define CH_CFG_USE_PIPES TRUE +# endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +# if !defined(CH_CFG_USE_DYNAMIC) +# define CH_CFG_USE_DYNAMIC TRUE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_CFG_USE_FACTORY) +# define CH_CFG_USE_FACTORY TRUE +# endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +# if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +# define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +# endif + +/** + * @brief Enables the registry of generic objects. + */ +# if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +# define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +# endif + +/** + * @brief Enables factory for generic buffers. + */ +# if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +# define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +# endif + +/** + * @brief Enables factory for semaphores. + */ +# if !defined(CH_CFG_FACTORY_SEMAPHORES) +# define CH_CFG_FACTORY_SEMAPHORES TRUE +# endif + +/** + * @brief Enables factory for mailboxes. + */ +# if !defined(CH_CFG_FACTORY_MAILBOXES) +# define CH_CFG_FACTORY_MAILBOXES TRUE +# endif + +/** + * @brief Enables factory for objects FIFOs. + */ +# if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +# define CH_CFG_FACTORY_OBJ_FIFOS TRUE +# endif + +/** + * @brief Enables factory for Pipes. + */ +# if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +# define CH_CFG_FACTORY_PIPES TRUE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_STATISTICS) +# define CH_DBG_STATISTICS FALSE +# endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_SYSTEM_STATE_CHECK) +# define CH_DBG_SYSTEM_STATE_CHECK TRUE +# endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_ENABLE_CHECKS) +# define CH_DBG_ENABLE_CHECKS TRUE +# endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_ENABLE_ASSERTS) +# define CH_DBG_ENABLE_ASSERTS TRUE +# endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +# if !defined(CH_DBG_TRACE_MASK) +# define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +# endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +# if !defined(CH_DBG_TRACE_BUFFER_SIZE) +# define CH_DBG_TRACE_BUFFER_SIZE 128 +# endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +# if !defined(CH_DBG_ENABLE_STACK_CHECK) +# define CH_DBG_ENABLE_STACK_CHECK TRUE +# endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +# if !defined(CH_DBG_FILL_THREADS) +# define CH_DBG_FILL_THREADS TRUE +# endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +# if !defined(CH_DBG_THREADS_PROFILING) +# define CH_DBG_THREADS_PROFILING FALSE +# endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +# define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +# define CH_CFG_SYSTEM_INIT_HOOK() \ + { /* Add threads initialization code here.*/ } + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +# define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +# define CH_CFG_THREAD_INIT_HOOK(tp) \ + { /* Add threads initialization code here.*/ } + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +# define CH_CFG_THREAD_EXIT_HOOK(tp) \ + { /* Add threads finalization code here.*/ } + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +# define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \ + { /* Context switch code here.*/ } + +/** + * @brief ISR enter hook. + */ +# define CH_CFG_IRQ_PROLOGUE_HOOK() \ + { /* IRQ prologue code here.*/ } + +/** + * @brief ISR exit hook. + */ +# define CH_CFG_IRQ_EPILOGUE_HOOK() \ + { /* IRQ epilogue code here.*/ } + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +# define CH_CFG_IDLE_ENTER_HOOK() \ + { /* Idle-enter code here.*/ } + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +# define CH_CFG_IDLE_LEAVE_HOOK() \ + { /* Idle-leave code here.*/ } + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +# define CH_CFG_IDLE_LOOP_HOOK() \ + { /* Idle loop code here.*/ } + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +# define CH_CFG_SYSTEM_TICK_HOOK() \ + { /* System tick event code here.*/ } + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +# define CH_CFG_SYSTEM_HALT_HOOK(reason) \ + { /* System halt code here.*/ } + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +# define CH_CFG_TRACE_HOOK(tep) \ + { /* Trace code here.*/ } + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/handwired/twadlee/tp69/config.h b/keyboards/handwired/twadlee/tp69/config.h new file mode 100644 index 0000000000..4da7d25603 --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/config.h @@ -0,0 +1,253 @@ +/* +Copyright 2020 Tracy Wadleigh + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +//#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBEEF +#define PRODUCT_ID 0xCACA +#define DEVICE_VER 0x0001 +#define MANUFACTURER Tracy Wadleigh +#define PRODUCT tp69 +#define DESCRIPTION A custom 69-key 65% keyboard with a trackpoint under keycap + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + */ +/* 19 17 16 15 14 2 8 6 7 9 */ +#define MATRIX_ROW_PINS { B2, B1, B0, C0, D1, D0, D3, D4, D2, C3 } +/* 20 21 18 0 1 3 4 5 */ +#define MATRIX_COL_PINS { D5, D6, A4, B16, B17, A1, A2, D7 } +#define UNUSED_PINS + +/* for trackpoint: C1 (22) C2 (23) */ + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/twadlee/tp69/halconf.h b/keyboards/handwired/twadlee/tp69/halconf.h new file mode 100644 index 0000000000..908c75542c --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/halconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +# define HALCONF_H + +# define _CHIBIOS_HAL_CONF_ +# define _CHIBIOS_HAL_CONF_VER_7_0_ + +# include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +# define HAL_USE_PAL TRUE +# endif + +/** + * @brief Enables the ADC subsystem. + */ +# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +# define HAL_USE_ADC FALSE +# endif + +/** + * @brief Enables the CAN subsystem. + */ +# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +# define HAL_USE_CAN FALSE +# endif + +/** + * @brief Enables the cryptographic subsystem. + */ +# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +# define HAL_USE_CRY FALSE +# endif + +/** + * @brief Enables the DAC subsystem. + */ +# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +# define HAL_USE_DAC FALSE +# endif + +/** + * @brief Enables the GPT subsystem. + */ +# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +# define HAL_USE_GPT FALSE +# endif + +/** + * @brief Enables the I2C subsystem. + */ +# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +# define HAL_USE_I2C FALSE +# endif + +/** + * @brief Enables the I2S subsystem. + */ +# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +# define HAL_USE_I2S FALSE +# endif + +/** + * @brief Enables the ICU subsystem. + */ +# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +# define HAL_USE_ICU FALSE +# endif + +/** + * @brief Enables the MAC subsystem. + */ +# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +# define HAL_USE_MAC FALSE +# endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +# define HAL_USE_MMC_SPI FALSE +# endif + +/** + * @brief Enables the PWM subsystem. + */ +# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +# define HAL_USE_PWM FALSE +# endif + +/** + * @brief Enables the RTC subsystem. + */ +# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +# define HAL_USE_RTC FALSE +# endif + +/** + * @brief Enables the SDC subsystem. + */ +# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +# define HAL_USE_SDC FALSE +# endif + +/** + * @brief Enables the SERIAL subsystem. + */ +# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +# define HAL_USE_SERIAL FALSE +# endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +# define HAL_USE_SERIAL_USB FALSE +# endif + +/** + * @brief Enables the SIO subsystem. + */ +# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +# define HAL_USE_SIO FALSE +# endif + +/** + * @brief Enables the SPI subsystem. + */ +# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +# define HAL_USE_SPI FALSE +# endif + +/** + * @brief Enables the TRNG subsystem. + */ +# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +# define HAL_USE_TRNG FALSE +# endif + +/** + * @brief Enables the UART subsystem. + */ +# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +# define HAL_USE_UART FALSE +# endif + +/** + * @brief Enables the USB subsystem. + */ +# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +# define HAL_USE_USB TRUE +# endif + +/** + * @brief Enables the WDG subsystem. + */ +# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +# define HAL_USE_WDG FALSE +# endif + +/** + * @brief Enables the WSPI subsystem. + */ +# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +# define HAL_USE_WSPI FALSE +# endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +# define PAL_USE_CALLBACKS FALSE +# endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +# define PAL_USE_WAIT FALSE +# endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +# define ADC_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define ADC_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +# define CAN_USE_SLEEP_MODE TRUE +# endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +# define CAN_ENFORCE_USE_CALLBACKS FALSE +# endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +# define HAL_CRY_USE_FALLBACK FALSE +# endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +# define HAL_CRY_ENFORCE_FALLBACK FALSE +# endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +# define DAC_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define DAC_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define I2C_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +# define MAC_USE_ZERO_COPY FALSE +# endif + +/** + * @brief Enables an event sources for incoming packets. + */ +# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +# define MAC_USE_EVENTS TRUE +# endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +# define MMC_NICE_WAITING TRUE +# endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +# define SDC_INIT_RETRY 100 +# endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +# define SDC_MMC_SUPPORT FALSE +# endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +# define SDC_NICE_WAITING TRUE +# endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +# define SDC_INIT_OCR_V20 0x50FF8000U +# endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +# define SDC_INIT_OCR 0x80100000U +# endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +# define SERIAL_DEFAULT_BITRATE 38400 +# endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +# define SERIAL_BUFFERS_SIZE 16 +# endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +# define SERIAL_USB_BUFFERS_SIZE 1 +# endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +# define SERIAL_USB_BUFFERS_NUMBER 2 +# endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +# define SPI_USE_WAIT TRUE +# endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +# define SPI_USE_CIRCULAR FALSE +# endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define SPI_USE_MUTUAL_EXCLUSION TRUE +# endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +# endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +# define UART_USE_WAIT FALSE +# endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define UART_USE_MUTUAL_EXCLUSION FALSE +# endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +# define USB_USE_WAIT TRUE +# endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +# define WSPI_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define WSPI_USE_MUTUAL_EXCLUSION TRUE +# endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/handwired/twadlee/tp69/info.json b/keyboards/handwired/twadlee/tp69/info.json new file mode 100644 index 0000000000..89eecb7d16 --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Twadlee TP69", + "url": "https://github.com/twadleigh/qmk_firmware", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3}, {"x":13.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2}, {"x":5.75, "y":4}, {"x":6.75, "y":4}, {"x":7.75, "y":4}, {"x":8.75, "y":4, "w":2.25}, {"x":11, "y":4, "w":1.25}, {"x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4, "w":1.25}, {"x":14.75, "y":4, "w":1.25}] + } + } +} diff --git a/keyboards/handwired/twadlee/tp69/keymaps/default/keymap.c b/keyboards/handwired/twadlee/tp69/keymaps/default/keymap.c new file mode 100644 index 0000000000..f250c3fc62 --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/keymaps/default/keymap.c @@ -0,0 +1,28 @@ +/* Copyright 2020 Tracy Wadleigh + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { _BASE }; +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_LGUI, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PGUP, KC_PGDN, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LALT, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ) +}; diff --git a/keyboards/handwired/twadlee/tp69/keymaps/default/readme.md b/keyboards/handwired/twadlee/tp69/keymaps/default/readme.md new file mode 100644 index 0000000000..453673a6e9 --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for tp69 diff --git a/keyboards/handwired/twadlee/tp69/mcuconf.h b/keyboards/handwired/twadlee/tp69/mcuconf.h new file mode 100644 index 0000000000..dc4d00bf18 --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/mcuconf.h @@ -0,0 +1,45 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE + +/* Need to redefine this, since the default (configured for K20x) might not apply + * 2 for Teensy LC + * 5 for Teensy 3.x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/handwired/twadlee/tp69/readme.md b/keyboards/handwired/twadlee/tp69/readme.md new file mode 100644 index 0000000000..201991cfe7 --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/readme.md @@ -0,0 +1,18 @@ +# Twadlee TP69 + + + +A 69-key keyboard having a Trackpoint unit under an additional 70th keycap. + +The layout is similar to a conventional 60% keyboard, but with additional 1u keys down a central split. The spacebar is also split, with the intervening space occupied by three mouse buttons and the left half replaced by a relocated `BACKSPACE` key. The right half of the spacebar is 2.25u. The space vacated by the `BACKSPACE` key is split into two additional 1u keys. The additional keycap on the home row does not cover a switch but a Trackpoint pointing device. All told, the 61 keycaps of the conventional 60% layout are augmented by an additional 9 1u keycaps, and a 2.25u keycap to replace the conventional 6.25u spacebar. + +Given the unconventional layout, only non-sculpted keycap profiles are practical. I use DSAs. + +* Keyboard Maintainer: [Tracy Wadleigh](https://github.com/twadleigh) +* Hardware Supported: Teensy LC controller + +Make example for this keyboard (after setting up your build environment): + + make handwired/twadlee/tp69:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/twadlee/tp69/rules.mk b/keyboards/handwired/twadlee/tp69/rules.mk new file mode 100644 index 0000000000..967060802b --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = MKL26Z64 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +PS2_MOUSE_ENABLE = no + +USE_CHIBIOS_CONTRIB = yes + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/twadlee/tp69/tp69.c b/keyboards/handwired/twadlee/tp69/tp69.c new file mode 100644 index 0000000000..f4454c3bda --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/tp69.c @@ -0,0 +1,18 @@ +/* Copyright 2020 Tracy Wadleigh + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include "tp69.h" diff --git a/keyboards/handwired/twadlee/tp69/tp69.h b/keyboards/handwired/twadlee/tp69/tp69.h new file mode 100644 index 0000000000..31c03eb70b --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/tp69.h @@ -0,0 +1,48 @@ +/* Copyright 2020 Tracy Wadleigh + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ + k10, k11, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k66, k67, \ + k20, k21, k23, k24, k25, k27, /**/ k70, k71, k72, k73, k74, k75, k77, \ + k30, k32, k33, k34, k35, k36, k37, k81, k82, k83, k84, k85, k86, \ + k40, k41, k43, k44, k46, k47, k91, k92, k94, k95, k96, k97 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07}, \ + { k10, k11, KC_NO, k13, k14, k15, k16, k17}, \ + { k20, k21, KC_NO, k23, k24, k25, KC_NO, k27}, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37}, \ + { k40, k41, KC_NO, k43, k44, KC_NO, k46, k47}, \ + { k50, k51, k52, k53, k54, k55, k56, k57}, \ + { k60, k61, k62, k63, k64, k65, k66, k67}, \ + { k70, k71, k72, k73, k74, k75, KC_NO, k77}, \ + {KC_NO, k81, k82, k83, k84, k85, k86, KC_NO}, \ + {KC_NO, k91, k92, KC_NO, k94, k95, k96, k97} \ +} diff --git a/keyboards/handwired/twadlee/tp69/twadlee-tp69-kle.json b/keyboards/handwired/twadlee/tp69/twadlee-tp69-kle.json new file mode 100644 index 0000000000..b54508bf4f --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/twadlee-tp69-kle.json @@ -0,0 +1,139 @@ +[ + { + "backcolor": "", + "name": "65% keyboard with pointing device under keycap", + "author": "Tracy Wadleigh", + "plate": false + }, + [ + { + "a": 7, + "f": 5 + }, + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "" + ], + [ + { + "w": 1.5 + }, + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + { + "w": 1.5 + }, + "" + ], + [ + { + "w": 1.75 + }, + "", + "", + "", + "", + "", + "", + { + "x": 1 + }, + "", + "", + "", + "", + "", + "", + { + "w": 2.25 + }, + "" + ], + [ + { + "w": 2.25 + }, + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + { + "w": 2.75 + }, + "" + ], + [ + { + "w": 1.25 + }, + "", + { + "w": 1.25 + }, + "", + { + "w": 1.25 + }, + "", + { + "w": 2 + }, + "", + "", + "", + "", + { + "w": 2.25 + }, + "", + { + "w": 1.25 + }, + "", + { + "w": 1.25 + }, + "", + { + "w": 1.25 + }, + "", + { + "w": 1.25 + }, + "" + ] +]
\ No newline at end of file |