diff options
Diffstat (limited to 'keyboards/handwired')
| -rw-r--r-- | keyboards/handwired/atreus50/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/atreus50.c | 10 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/atreus50.h | 36 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/config.h | 163 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/keymaps/default/Makefile | 6 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/keymaps/default/keymap.c | 250 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/readme.md | 16 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/rules.mk | 81 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/config.h | 167 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/kbod.c | 28 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/kbod.h | 21 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/keymaps/default/Makefile | 21 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/keymaps/default/config.h | 8 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/keymaps/default/keymap.c | 104 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/keymaps/default/readme.md | 5 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/readme.md | 21 | ||||
| -rw-r--r-- | keyboards/handwired/kbod/rules.mk | 68 |
18 files changed, 1011 insertions, 0 deletions
diff --git a/keyboards/handwired/atreus50/Makefile b/keyboards/handwired/atreus50/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/handwired/atreus50/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/handwired/atreus50/atreus50.c b/keyboards/handwired/atreus50/atreus50.c new file mode 100644 index 0000000000..225a51bcce --- /dev/null +++ b/keyboards/handwired/atreus50/atreus50.c @@ -0,0 +1,10 @@ +#include "atreus50.h" + +void matrix_init_kb(void) { + + // Turn status LED on + //DDRE |= (1<<6); + PORTE |= (1<<6); + + matrix_init_user(); +}; diff --git a/keyboards/handwired/atreus50/atreus50.h b/keyboards/handwired/atreus50/atreus50.h new file mode 100644 index 0000000000..de06f255e8 --- /dev/null +++ b/keyboards/handwired/atreus50/atreus50.h @@ -0,0 +1,36 @@ +#ifndef ATREUS50_H +#define ATREUS50_H + +#include "quantum.h" + +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, km0, km1, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, km0, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, km1, k36, k37, k38, k39, k3a, k3b } \ +} + +#define COMPACT_KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, km0, km1, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_NO, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b }, \ + { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_NO, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b }, \ + { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##km0, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b }, \ + { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##km1, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b } \ +} + +#define KC_ KC_TRNS + +#endif diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h new file mode 100644 index 0000000000..2e34e0f898 --- /dev/null +++ b/keyboards/handwired/atreus50/config.h @@ -0,0 +1,163 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBB80 +#define PRODUCT_ID 0x040D +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hexwire +#define PRODUCT Atreus 50 Keyboard +#define DESCRIPTION Atreus layout with extra column + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { D3, D2, D1, D0 } +#define MATRIX_COL_PINS { D4, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/* ws2812 RGB LED */ +#define RGB_DI_PIN C6 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/atreus50/keymaps/default/Makefile b/keyboards/handwired/atreus50/keymaps/default/Makefile new file mode 100644 index 0000000000..d7b0fa7fd8 --- /dev/null +++ b/keyboards/handwired/atreus50/keymaps/default/Makefile @@ -0,0 +1,6 @@ +RGBLIGHT_ENABLE = yes +AUDIO_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/atreus50/keymaps/default/keymap.c b/keyboards/handwired/atreus50/keymaps/default/keymap.c new file mode 100644 index 0000000000..415405ec23 --- /dev/null +++ b/keyboards/handwired/atreus50/keymaps/default/keymap.c @@ -0,0 +1,250 @@ +#include "atreus50.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MOVEMENT 5 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + MOVEMENT, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define KC_X0 MT(MOD_LCTL, KC_ESC) // Hold for Left Ctrl, Tap for ESC +#define KC_X1 LOWER +#define KC_X2 RAISE +#define KC_X3 MO(_MOVEMENT) +#define KC_X4 MT(MOD_LSFT, KC_ENT) // Hold for Left Shift, Tap for Enter + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + GRV ,LCTL,LALT,LGUI, X1 ,SPC , X3 ,RSFT,BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_COLEMAK] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , R , S , T , D , H , N , E , I , O ,QUOT, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + GRV ,LCTL,LALT,LGUI, X1 ,SPC , X3 ,RSFT,BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_DVORAK] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + X0 , A , O , E , U , I , D , H , R , N , S ,SLSH, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + GRV ,LCTL,LALT,LGUI, X1 ,SPC , X3 ,RSFT,BSPC, X2 ,LEFT,DOWN, UP ,RGHT + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_LOWER] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TILD,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,DEL , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL , F1 , F2 , F3 , F4 , F5 , F6 ,UNDS,PLUS,LCBR,RCBR,PIPE, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , F7 , F8 , F9 ,F10 ,F11 , F12 ,END , , , , , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + , , , , , , , , , ,MNXT,VOLD,VOLU,MPLY + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_RAISE] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + GRV , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,DEL , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL , F1 , F2 , F3 , F4 , F5 , F6 ,MINS,EQL ,LBRC,RBRC,BSLS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , F7 , F8 , F9 ,F10 ,F11 , F12 ,NUHS,NUBS, , , , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + , , , , , , , , , ,MNXT,VOLD,VOLU,MPLY + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + + [_MOVEMENT] = COMPACT_KEYMAP( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + TILD,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR, UP ,LPRN,RPRN,DEL , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + DEL , F1 , F2 , F3 , F4 , F5 , F6 ,LEFT,DOWN,RGHT,RCBR,PIPE, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , F7 , F8 , F9 ,F10 ,F11 , F12 ,END , , , , , + //|----+----+----+----+----+----|----+----|----+----+----+----+----+----| + , , , , , , , ,PGDN,PGUP,MNXT,VOLD,VOLU,MPLY + //`----+----+----+----+----+----+----+----+----+----+----+----+----+----' + ), + +/* Adjust (Lower + Raise) + * |------+------+------+------+------+------. ,------+------+------+------+------+------| + * | | Reset| | | | | | | | | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |Audoff|Aud on|AGnorm| |AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | |Voice-|Voice+|Musoff|Mus on| | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = KEYMAP( \ + _______, RESET, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ) + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/handwired/atreus50/readme.md b/keyboards/handwired/atreus50/readme.md new file mode 100644 index 0000000000..0c24f67db2 --- /dev/null +++ b/keyboards/handwired/atreus50/readme.md @@ -0,0 +1,16 @@ +Handwired Atreus50 +================== + +This firmware is for a Handwired Atreus50 using an Arduino Pro Micro. + +## Pinout + +The following pins are used: +- Columns 1-13: D4, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 +- Rows 1-4: D3, D2, D1, D0 + +## Compiling and loading the firmware + +To build the firmware, run `make`. + +To flash the firemware onto the microcontroller, run `make avrdude`, and press the reset button. diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk new file mode 100644 index 0000000000..7770ea2a27 --- /dev/null +++ b/keyboards/handwired/atreus50/rules.mk @@ -0,0 +1,81 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/handwired/kbod/Makefile b/keyboards/handwired/kbod/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/handwired/kbod/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h new file mode 100644 index 0000000000..f3d0c8bf2d --- /dev/null +++ b/keyboards/handwired/kbod/config.h @@ -0,0 +1,167 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER fudanchii +#define PRODUCT kbod +#define DESCRIPTION Keyboard of Disapproval + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 } +#define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define PREVENT_STUCK_MODIFIERS + +#undef TAPPING_TOGGLE +#define TAPPING_TOGGLE 2 + +#endif diff --git a/keyboards/handwired/kbod/kbod.c b/keyboards/handwired/kbod/kbod.c new file mode 100644 index 0000000000..9a12cae0d2 --- /dev/null +++ b/keyboards/handwired/kbod/kbod.c @@ -0,0 +1,28 @@ +#include "kbod.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/handwired/kbod/kbod.h b/keyboards/handwired/kbod/kbod.h new file mode 100644 index 0000000000..3560636242 --- /dev/null +++ b/keyboards/handwired/kbod/kbod.h @@ -0,0 +1,21 @@ +#ifndef KBOD_H +#define KBOD_H + +#include "quantum.h" + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, \ + k40, k41, k42, k43, k44, k45, k46, k47 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, { k08, k09, k0A, k0B, k0C, k0D, KC_NO, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, { k18, k19, k1A, k1B, k1C, k1D, KC_NO, k3B }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, { k28, k29, k2A, k2B, k2C, k38, k39, k3A }, \ + { k30, k31, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47 }, \ +} + +#endif diff --git a/keyboards/handwired/kbod/keymaps/default/Makefile b/keyboards/handwired/kbod/keymaps/default/Makefile new file mode 100644 index 0000000000..0d9def930c --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/config.h b/keyboards/handwired/kbod/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c new file mode 100644 index 0000000000..1386b742f5 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -0,0 +1,104 @@ +#include "kbod.h" + +#define _____ KC_TRNS + +#define MODS_PRESSED(btn) (get_mods() & (MOD_BIT(KC_L##btn)|MOD_BIT(KC_R##btn))) + +#define SET_WHETHER(mask, btn1, btn2) \ +if (record->event.pressed) { \ + if (mask) { \ + add_key(btn2); \ + send_keyboard_report(); \ + } else { \ + add_key(btn1); \ + send_keyboard_report(); \ + } \ +} else { \ + if (mask) { \ + del_key(btn2); \ + send_keyboard_report(); \ + } else { \ + del_key(btn1); \ + send_keyboard_report(); \ + } \ +} \ + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP( /* Base */ + F(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT, + TT(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ), + KEYMAP( /* Cursor layer */ + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + TT(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, + TT(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, _____, + _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_END, KC_UP, + _____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT + ), + KEYMAP( /* Keypad layer */ + TO(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_P7, KC_P8, KC_P9, KC_P0, KC_PMNS, KC_PPLS, KC_BSPC, + _____, _____, _____, _____, _____, _____, _____, KC_P4, KC_P5, KC_P6, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P1, KC_P2, KC_P3, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P0, KC_PDOT, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, + _____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 + ), + KEYMAP( /* Multimedia layer */ + TO(0), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____, + _____, _____, KC_WAKE, _____, _____, _____, _____, _____, _____, _____, KC_MSTP, KC_MPRV, KC_MNXT, _____, + _____, _____, KC_SLEP, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, KC_PWR, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, KC_MS_BTN2, + _____, _____, _____, KC_MPLY, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), + [1] = ACTION_FUNCTION(1), +}; + + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_mask; + static uint8_t alt_mask; + switch (id) { + case 0: + shift_esc_mask = MODS_PRESSED(SHIFT); + SET_WHETHER(shift_esc_mask, KC_ESC, KC_GRAVE); + break; + case 1: + alt_mask = MODS_PRESSED(ALT); + SET_WHETHER(alt_mask, KC_4, KC_F4); + break; + } +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & _BV(USB_LED_CAPS_LOCK)) { + PORTB |= _BV(PB0); + } else { + PORTB &= ~_BV(PB0); + } +} + +void matrix_init_user(void) { + DDRB |= _BV(PB0); + DDRC |= _BV(PC7); +} + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + if (layer) { + PORTC |= _BV(PC7); + } else { + PORTC &= ~_BV(PC7); + } +}
\ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/readme.md b/keyboards/handwired/kbod/keymaps/default/readme.md new file mode 100644 index 0000000000..35c22ec007 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The default keymap for kbod + +This is the default keymap for kbod, + +it consists of a base layer with QWERTY layout, a momentary cursor-layer, and mouse-keys and multimedia layers.
\ No newline at end of file diff --git a/keyboards/handwired/kbod/readme.md b/keyboards/handwired/kbod/readme.md new file mode 100644 index 0000000000..67bf711bee --- /dev/null +++ b/keyboards/handwired/kbod/readme.md @@ -0,0 +1,21 @@ +KBOD keyboard firmware +====================== + +KBOD is a 60% Keyboard kit, hand-wired, with Arduino Micro as its controller. It's utilize 8x8 matrix and has layout similar to GH-60 + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and use ```make handwired-kbod-default``` to generate the .hex file. You may flash it with avrdude + +## Flashing +Something along this line: + +``` +avrdude -p m32u4 -c avr109 -P <COM PORT> -C <avrdude conf file> -e -u flash:w:handwired_kbod_default.hex +``` + +[More info](https://github.com/fudanchii/keyboard_of_disapproval)
\ No newline at end of file diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk new file mode 100644 index 0000000000..4fcd147a9a --- /dev/null +++ b/keyboards/handwired/kbod/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches |