summaryrefslogtreecommitdiff
path: root/keyboards/handwired
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired')
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.c1
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.h48
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/Makefile3
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/babblePaste.c459
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/babblePaste.h238
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/babblePaste.txt123
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/config.h100
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/keymaps/default/Makefile21
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/keymaps/default/config.h8
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/keymaps/default/keymap.c64
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/keymaps/default/readme.md1
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/Makefile21
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/config.h32
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/keymap.c272
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/readme.md1
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/readme.md58
-rw-r--r--keyboards/handwired/MS-sculpt-mobile/rules.mk48
-rw-r--r--keyboards/handwired/magicforce68/Makefile3
-rw-r--r--keyboards/handwired/magicforce68/README.md20
-rw-r--r--keyboards/handwired/magicforce68/config.h162
-rw-r--r--keyboards/handwired/magicforce68/keymaps/default/keymap.c67
-rw-r--r--keyboards/handwired/magicforce68/magicforce68.c8
-rw-r--r--keyboards/handwired/magicforce68/magicforce68.h20
-rw-r--r--keyboards/handwired/magicforce68/rules.mk83
-rw-r--r--keyboards/handwired/magicforce68/wiring-layout.pngbin0 -> 73739 bytes
-rw-r--r--keyboards/handwired/numpad20/Makefile3
-rw-r--r--keyboards/handwired/numpad20/config.h162
-rw-r--r--keyboards/handwired/numpad20/keymaps/default/keymap.c16
-rw-r--r--keyboards/handwired/numpad20/numpad20.c8
-rw-r--r--keyboards/handwired/numpad20/numpad20.h20
-rw-r--r--keyboards/handwired/numpad20/rules.mk83
-rw-r--r--keyboards/handwired/ortho5x13/Makefile3
-rw-r--r--keyboards/handwired/ortho5x13/config.h162
-rw-r--r--keyboards/handwired/ortho5x13/keymaps/default/keymap.c289
-rw-r--r--keyboards/handwired/ortho5x13/ortho5x13.c8
-rw-r--r--keyboards/handwired/ortho5x13/ortho5x13.h36
-rw-r--r--keyboards/handwired/ortho5x13/rules.mk83
-rw-r--r--keyboards/handwired/promethium/keymaps/priyadi/README.md2
-rw-r--r--keyboards/handwired/promethium/keymaps/priyadi/keymap.c57
39 files changed, 2767 insertions, 26 deletions
diff --git a/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.c b/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.c
new file mode 100644
index 0000000000..4c735a6c29
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.c
@@ -0,0 +1 @@
+#include "MS-sculpt-mobile.h"
diff --git a/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.h b/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.h
new file mode 100644
index 0000000000..1583dea6e8
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/MS-sculpt-mobile.h
@@ -0,0 +1,48 @@
+#ifndef MICROSOFT_SCULPT_MOBILE_H
+#define MICROSOFT_SCULPT_MOBILE_H
+
+#include "quantum.h"
+
+
+#define KEYMAP( \
+ k7Q, k6O, k6P, k6Q, k5O, k5P, k5Q, k7A, k7B, k7C, k7D, k7E, k7F, k1O, k1K, k1L, \
+ k5A, k5K, k5L, k5M, k5N, k5H, k5I, k2A, k2B, k2C, k2D, k5B, k5C, k5J, k2E, \
+ k6R, k6D, k6E, k6F, k7I, k7J, k4A, k4B, k4C, k4D, k3A, k3B, k3C, k3D, \
+ k0J, k6A, k6B, k6C, k7H, k1A, k1B, k5D, k5E, k5F, k5G, k1C, k7P, k2G, \
+ k2P, k7K, k7L, k7M, k7O, k0A, k0B, k0C, k0D, k0E, k0F, k2L, k6G, k1P,\
+ k1Q, k4N, k3O,k6N, k3K, k0R, k1M, k6H, k6I, k6J \
+) \
+{ \
+ {k0A, k0B, k0C, k0D, k0E, k0F, KC_NO, KC_NO, KC_NO, k0J, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC_NO, KC_NO, k0R},\
+ {k1A, k1B, k1C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k1K, k1L, k1M, KC_NO, k1O, k1P, k1Q, KC_NO},\
+ {k2A, k2B, k2C, k2D, k2E, KC_NO, k2G, KC_NO, KC_NO, KC_NO, KC_NO, k2L, KC_NO, KC_NO, KC_NO, k2P, KC_NO, KC_NO},\
+ {k3A, k3B, k3C, k3D, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k3K, KC_NO, KC_NO, KC_NO, k3O, KC_NO, KC_NO, KC_NO},\
+ {k4A, k4B, k4C, k4D, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k4N, KC_NO,KC_NO, KC_NO, KC_NO},\
+ {k5A, k5B, k5C, k5D, k5E, k5F, k5G, k5H, k5I, k5J, k5K, k5L, k5M, k5N, k5O, k5P, k5Q, KC_NO },\
+ {k6A, k6B, k6C, k6D, k6E, k6F, k6G, k6H, k6I, k6J, KC_NO, KC_NO, KC_NO, k6N, k6O, k6P, k6Q, k6R},\
+ {k7A, k7B, k7C, k7D, k7E, k7F, KC_NO, k7H, k7I, k7J, k7K, k7L, k7M, KC_NO, k7O, k7P, k7Q, KC_NO},\
+}
+
+
+#define MATRIX_TESTING_KEYMAP( \
+ k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0I, k0, k0J, k0K, k0L, k0M, k0N, k0O, k0P, k0Q,\
+ k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, k1, k1J, k1K, k1L, k1M, k1N, k1O, k1P, k1Q,\
+ k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, k2, k2J, k2K, k2L, k2M, k2N, k2O, k2P, k2Q,\
+ k3A, k3B, k3C, k3D, k3E, k3F, k3G, k3H, k3I, k3, k3J, k3K, k3L, k3M, k3N, k3O, k3P, k3Q,\
+ k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, k4I, k4, k4J, k4K, k4L, k4M, k4N, k4O, k4P, k4Q,\
+ k5A, k5B, k5C, k5D, k5E, k5F, k5G, k5H, k5I, k5, k5J, k5K, k5L, k5M, k5N, k5O, k5P, k5Q,\
+ k6A, k6B, k6C, k6D, k6E, k6F, k6G, k6H, k6I, k6, k6J, k6K, k6L, k6M, k6N, k6O, k6P, k6Q,\
+ k7A, k7B, k7C, k7D, k7E, k7F, k7G, k7H, k7I, k7, k7J, k7K, k7L, k7M, k7N, k7O, k7P, k7Q\
+) \
+{ \
+ {k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0I, k0, k0J, k0K, k0L, k0M, k0N, k0O, k0P, k0Q},\
+ {k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, k1, k1J, k1K, k1L, k1M, k1N, k1O, k1P, k1Q},\
+ {k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, k2, k2J, k2K, k2L, k2M, k2N, k2O, k2P, k2Q},\
+ {k3A, k3B, k3C, k3D, k3E, k3F, k3G, k3H, k3I, k3, k3J, k3K, k3L, k3M, k3N, k3O, k3P, k3Q},\
+ {k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, k4I, k4, k4J, k4K, k4L, k4M, k4N, k4O, k4P, k4Q},\
+ {k5A, k5B, k5C, k5D, k5E, k5F, k5G, k5H, k5I, k5, k5J, k5K, k5L, k5M, k5N, k5O, k5P, k5Q},\
+ {k6A, k6B, k6C, k6D, k6E, k6F, k6G, k6H, k6I, k6, k6J, k6K, k6L, k6M, k6N, k6O, k6P, k6Q},\
+ {k7A, k7B, k7C, k7D, k7E, k7F, k7G, k7H, k7I, k7, k7J, k7K, k7L, k7M, k7N, k7O, k7P, k7Q},\
+}
+
+#endif
diff --git a/keyboards/handwired/MS-sculpt-mobile/Makefile b/keyboards/handwired/MS-sculpt-mobile/Makefile
new file mode 100644
index 0000000000..bd09e5885d
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif
diff --git a/keyboards/handwired/MS-sculpt-mobile/babblePaste.c b/keyboards/handwired/MS-sculpt-mobile/babblePaste.c
new file mode 100644
index 0000000000..3a9b86997d
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/babblePaste.c
@@ -0,0 +1,459 @@
+/* A library to output the right key shortcut in any common app.
+Given a global variable babble_mode to show the environment and a
+key that calls the paste macro, do the right type of paste.
+Setting the context is done by another macro, or TBD interaction with the host.
+
+Huge thanks to https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
+and https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/jeebak/keymap.c
+*/
+
+#include "babblePaste.h"
+#include "action_macro.h"
+
+#ifdef USE_BABLPASTE
+
+// GLOBAL variable to determine mode. Sets startup default if no eeppom
+uint8_t babble_mode =0 ;
+
+// small function that we might also want to call from a keymap.
+
+macro_t* switch_babble_mode( uint8_t id) {
+ babble_mode= id;
+ return MACRO_NONE; //less typing where called
+}
+
+
+// Today I learned that the preprocessor can not create a switch statement label from an argument
+// And else statements have problems, see https://gcc.gnu.org/onlinedocs/gcc-3.0.1/cpp_3.html#SEC15
+#define BABLM(ent, macro...) \
+ if ( ent == shortcut ) \
+ { action_macro_play( MACRO(macro)); return MACRO_NONE; }
+
+
+/* this function runs the appropriate babblepaste macro, given
+the global babble_mode, and a shortcut from the ENUM in babblePaste.h
+TODO, the pointers in this function should be stored in a PROGMEM array, not ram.
+But that requires even more clever preprocessor foo.
+*/
+const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) {
+/*
+ if ( shortcut < BABL_START_NUM || \
+ shortcut >= (BABL_START_NUM + BABL_NUM_MACROS ) ) {
+ return MACRO_NONE;
+ }
+*/
+
+
+#ifdef MS_MODE
+ if ( BABL_WINDOWS == shortcut ) { return switch_babble_mode(MS_MODE); }
+#endif
+#ifdef MAC_MODE
+ if ( BABL_MAC == shortcut) { return switch_babble_mode(MAC_MODE); }
+#endif
+#ifdef LINUX_MODE
+ if ( BABL_LINUX == shortcut ) { return switch_babble_mode(LINUX_MODE); }
+#endif
+ #ifdef READMUX_MODE
+ if ( BABL_READLINE == shortcut ) { switch_babble_mode(READMUX_MODE); return MACRO_NONE; }
+#endif
+#ifdef VI_MODE
+ if ( BABL_VI == shortcut ) { return switch_babble_mode(VI_MODE); }
+#endif
+#ifdef EMACS_MODE
+ if ( BABL_EMACS == shortcut ) { return switch_babble_mode(EMACS_MODE); }
+#endif
+
+
+
+ switch(babble_mode) {
+
+#ifdef MS_MODE
+
+ case MS_MODE:
+ BABLM( BABL_GO_LEFT_1C, T(LEFT), END );
+ BABLM( BABL_GO_RIGHT_1C , T(RIGHT), END );
+ BABLM( BABL_GO_LEFT_WORD, D(LCTL), T(LEFT), U(LCTL), END );
+ BABLM( BABL_GO_RIGHT_WORD, D(LCTL), T(RIGHT), U(LCTL), END );
+ BABLM( BABL_GO_START_LINE, T(HOME), END );
+ BABLM( BABL_GO_END_LINE, T(END), END );
+ BABLM( BABL_GO_START_DOC, D(LCTL),T(HOME), U(LCTL),END );
+ BABLM( BABL_GO_END_DOC, D(LCTL),T(END), U(LCTL),END );
+ BABLM( BABL_GO_NEXT_LINE, T(DOWN), END );
+ BABLM( BABL_GO_PREV_LINE, T(UP), END );
+ BABLM( BABL_PGDN, T(PGDN), END );
+ BABLM( BABL_PGUP, T(PGUP), END );
+ BABLM( BABL_DEL_RIGHT_1C, T(DEL), END );
+ BABLM( BABL_DEL_LEFT_WORD, D(LCTL), T(BSPACE), U(LCTL), END );
+ BABLM( BABL_DEL_RIGHT_WORD, D(LCTL), T(DEL), U(LCTL), END );
+ BABLM( BABL_DEL_TO_LINE_END, D(RSFT), T(HOME), U(RSFT), T(DEL), END);
+ BABLM( BABL_DEL_TO_LINE_START, D(RSFT), T(END), U(RSFT), T(DEL), END );
+#ifndef BABL_MOVEMENTONLY
+ BABLM( BABL_UNDO, D(LCTL), T(Z), U(LCTL), END );
+ BABLM( BABL_REDO, D(LCTL), T(Y), U(LCTL), END );
+ BABLM( BABL_CUT, D(LCTL), T(X), U(LCTL), END );
+ BABLM( BABL_COPY, D(LCTL), T(C), U(LCTL), END );
+ BABLM( BABL_PASTE, D(LCTL), T(V), U(LCTL), END );
+ BABLM( BABL_SELECT_ALL, D(LCTL), T(A), U(LCTL), END );
+ BABLM( BABL_FIND, D(LCTL),T(F), U(LCTL),END );
+ BABLM( BABL_FIND_NEXT, T(F3),END );
+ BABLM( BABL_FIND_REPLACE, D(LCTL),T(H), U(LCTL),END );
+ BABLM( BABL_RUNAPP, D(LGUI),T(R), U(LGUI),END );
+ BABLM( BABL_SWITCH_APP_NEXT, D(LALT),T(TAB), U(LALT),END );
+ BABLM( BABL_SWITCH_APP_LAST, D(LSFT),D(LALT),T(TAB), U(LALT), U(LSFT),END );
+ BABLM( BABL_CLOSE_APP, D(LALT),T(F4), U(LALT),END );
+ BABLM( BABL_HELP, T(F1),END );
+#ifndef BABL_NOBROWSER
+ BABLM( BABL_BROWSER_NEW_TAB, D(LCTL), T(T), U(LCTL),END );
+ BABLM( BABL_BROWSER_CLOSE_TAB, D(LCTL), T(W), U(LCTL),END );
+ BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LCTL), D(RSFT),T(T), U(RSFT),U(LCTL),END );
+ BABLM( BABL_BROWSER_NEXT_TAB, D(LCTL), T(TAB), U(LCTL),END );
+ BABLM( BABL_BROWSER_PREV_TAB, D(LCTL), D(RSFT), T(TAB), U(RSFT), U(LCTL),END );
+ BABLM( BABL_BROWSER_URL_BAR, D(LCTL), T(L), U(LCTL),END );
+ BABLM( BABL_BROWSER_FORWARD, D(LALT), T(RIGHT), U(LALT),END );
+ BABLM( BABL_BROWSER_BACK, D(LALT), T(LEFT), U(LALT),END );
+ BABLM( BABL_BROWSER_FIND, D(LCTL), T(F), U(LCTL),END );
+ BABLM( BABL_BROWSER_BOOKMARK, D(LCTL), T(D), U(LCTL),END );
+ //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LCTL),END ); // EDGE
+ BABLM( BABL_BROWSER_DEV_TOOLS, D(LCTL), T(T), U(LCTL),END ); // Chrome
+ // Chrome
+ BABLM( BABL_BROWSER_RELOAD, D(LCTL), T(F5), U(LCTL),END ); // hard reload w/o cache
+ BABLM( BABL_BROWSER_FULLSCREEN, T(F11),END ); //command shift F
+ BABLM( BABL_BROWSER_ZOOM_IN, D(LCTL), D(RSFT), T(EQL), U(RSFT), U(LCTL),END ); // ctr+ +
+ BABLM( BABL_BROWSER_ZOOM_OUT, D(LCTL), T(MINS), U(LCTL),END );
+#endif
+#endif
+
+ // Todo, ring bell, flash light, show user this isn't supported
+ return MACRO_NONE;
+
+
+#endif /* MS_MODE*/
+
+
+#ifdef LINUX_MODE
+
+ case LINUX_MODE:
+ BABLM( BABL_GO_LEFT_1C , T(LEFT), END );
+ BABLM( BABL_GO_RIGHT_1C , T(RIGHT), END );
+ BABLM( BABL_GO_LEFT_WORD , D(LCTL), T(LEFT), U(LCTL), END );
+ BABLM( BABL_GO_RIGHT_WORD , D(LCTL), T(RIGHT), U(LCTL), END );
+ BABLM( BABL_GO_START_LINE , T(HOME), END );
+ BABLM( BABL_GO_END_LINE , T(END), END );
+ BABLM( BABL_GO_START_DOC , D(LCTL),T(HOME), U(LCTL),END );
+ BABLM( BABL_GO_END_DOC , D(LCTL),T(END), U(LCTL),END );
+ BABLM( BABL_GO_NEXT_LINE , T(DOWN), END );
+ BABLM( BABL_GO_PREV_LINE , T(UP), END );
+ BABLM( BABL_PGDN , T(PGDN), END );
+ BABLM( BABL_PGUP , T(PGUP), END );
+ BABLM( BABL_DEL_RIGHT_1C , D(DEL), END );
+ BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(BSPACE), U(LCTL), END );
+ BABLM( BABL_DEL_RIGHT_WORD , D(LCTL), T(DEL), U(LCTL), END );
+ BABLM( BABL_DEL_TO_LINE_END, D(RSFT), T(HOME), U(RSFT), T(DEL), END);
+ BABLM( BABL_DEL_TO_LINE_START, D(RSFT), T(END), U(RSFT), T(DEL), END );
+#ifndef BABL_MOVEMENTONLY
+ BABLM( BABL_UNDO , D(LCTL), T(Z), U(LCTL), END );
+ BABLM( BABL_REDO , D(LCTL), T(Y), U(LCTL), END );
+ BABLM( BABL_CUT , D(LCTL), T(X), U(LCTL), END );
+ BABLM( BABL_COPY , D(LCTL), T(C), U(LCTL), END );
+ BABLM( BABL_PASTE , D(LCTL), T(V), U(LCTL), END );
+ BABLM( BABL_SELECT_ALL, D(LCTL), T(A), U(LCTL), END );
+ BABLM( BABL_FIND, D(LCTL),T(F), U(LCTL),END );
+ /* BABLM(BABL_FIND_NEXT , T(F3),END ); KDE */
+ BABLM( BABL_FIND_NEXT, D(LCTL),T(G), U(LCTL),END ); // Gnome*/
+ /* BABLM( , D(LCTL),T(R), U(LCTL),END ); KDE */
+ BABLM( BABL_FIND_REPLACE, D(LCTL),T(H), U(LCTL),END ); // Gnome*/
+ BABLM( BABL_RUNAPP, D(LALT),T(F2), U(LALT),END );
+ BABLM( BABL_SWITCH_APP_NEXT, D(LCTL),T(TAB), U(LCTL),END );
+ BABLM( BABL_SWITCH_APP_LAST, D(LSFT),D(LCTL),T(TAB), U(LCTL), U(LSFT),END );
+ BABLM( BABL_CLOSE_APP, D(LALT),T(F4), U(LALT),END );
+ //BABLM( BABL_HELP, END );
+
+#ifndef BABL_NOBROWSER
+ BABLM( BABL_BROWSER_NEW_TAB, D(LCTL), T(T), U(LCTL),END );
+ BABLM( BABL_BROWSER_CLOSE_TAB, D(LCTL), T(W), U(LCTL),END );
+ BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LCTL), D(RSFT),T(T), U(RSFT),U(LCTL),END );
+ BABLM( BABL_BROWSER_NEXT_TAB, D(LCTL), T(TAB), U(LCTL),END );
+ BABLM( BABL_BROWSER_PREV_TAB, D(LCTL), D(RSFT), T(TAB), U(RSFT), U(LCTL),END );
+ BABLM( BABL_BROWSER_URL_BAR, D(LCTL), T(L), U(LCTL),END );
+ BABLM( BABL_BROWSER_FORWARD, D(LALT), T(RIGHT), U(LALT),END );
+ BABLM( BABL_BROWSER_BACK, D(LALT), T(LEFT), U(LALT),END );
+ BABLM( BABL_BROWSER_FIND, D(LCTL), T(F), U(LCTL),END );
+ BABLM( BABL_BROWSER_BOOKMARK, D(LCTL), T(D), U(LCTL),END );
+ BABLM( BABL_BROWSER_DEV_TOOLS, D(LCTL), T(T), U(LCTL),END ); // Chrome
+ BABLM( BABL_BROWSER_RELOAD, D(LCTL), T(F5), U(LCTL),END ); // hard reload w/o cache
+ BABLM( BABL_BROWSER_FULLSCREEN, T(F11),END ); //command shift F
+ BABLM( BABL_BROWSER_ZOOM_IN, D(LCTL), T(PLUS), U(LCTL),END );
+ BABLM( BABL_BROWSER_ZOOM_OUT, D(LCTL), T(MINS), U(LCTL),END );
+#endif
+#endif
+ return MACRO_NONE;
+
+#endif
+
+#ifdef MAC_MODE
+
+ case MAC_MODE:
+ BABLM( BABL_GO_LEFT_1C , T(LEFT), END );
+ BABLM( BABL_GO_RIGHT_1C, T(RIGHT), END );
+ BABLM( BABL_GO_LEFT_WORD , D(LALT), T(LEFT), U(LALT), END );
+ BABLM( BABL_GO_RIGHT_WORD , D(LALT), T(RIGHT), U(LALT), END );
+ BABLM( BABL_GO_START_LINE , D(LGUI), T(LEFT), U(LGUI), END );
+ BABLM( BABL_GO_END_LINE , D(LGUI), T(RIGHT), U(LGUI), END );
+ BABLM( BABL_GO_START_DOC , D(LGUI),T(UP), U(LGUI),END );
+ BABLM( BABL_GO_END_DOC , D(LGUI),T(DOWN), U(LGUI),END );
+ BABLM( BABL_GO_NEXT_LINE , T(DOWN), END );
+ BABLM( BABL_GO_PREV_LINE , T(UP), END );
+ BABLM( BABL_PGDN , D(LALT),T(DOWN), U(LALT), END );
+ BABLM( BABL_PGUP , D(LALT),T(UP), U(LALT), END );
+ BABLM( BABL_DEL_RIGHT_1C , D(DEL), END );
+ BABLM( BABL_DEL_LEFT_WORD , D(LALT), T(BSPACE), U(LALT), END );
+ BABLM( BABL_DEL_RIGHT_WORD, D(LALT), T(DEL), U(LALT), END );
+ BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END );// there must be another way
+ BABLM( BABL_DEL_TO_LINE_START, D(LGUI), T(BSPACE), U(LGUI), END );
+#ifndef BABL_MOVEMENTONLY
+ BABLM( BABL_UNDO , D(1), D(LGUI), T(Z), U(LGUI), END );
+ BABLM( BABL_REDO , D(LSFT),D(LGUI), T(Z), U(LSFT),U(LGUI), END );
+ BABLM( BABL_CUT , D(LGUI), T(X), U(LGUI), END );
+ BABLM( BABL_COPY , D(LGUI), T(C), U(LGUI), END );
+ BABLM( BABL_PASTE , D(LGUI), T(V), U(LGUI), END );
+ BABLM( BABL_SELECT_ALL , D(LGUI), T(A), U(LGUI), END );
+ BABLM( BABL_FIND , D(LGUI),T(F), U(LGUI),END );
+ BABLM( BABL_FIND_NEXT, D(LGUI),T(G), U(LGUI),END );
+ BABLM( BABL_FIND_REPLACE, D(LGUI),T(F), U(LGUI),END );
+ BABLM( BABL_RUNAPP , D(LGUI),T(R), U(LGUI),END );
+ BABLM( BABL_SWITCH_APP_NEXT , D(LGUI),T(TAB), U(LGUI),END );
+ BABLM( BABL_SWITCH_APP_LAST , D(LSFT),D(LGUI),T(TAB), U(LGUI), U(LSFT),END );
+ BABLM( BABL_CLOSE_APP , D(LGUI),T(Q), U(LGUI),END );
+ BABLM( BABL_HELP , D(LSFT),D(LGUI),T(SLASH), U(LGUI), U(LSFT),END );
+
+#ifndef BABL_NOBROWSER
+ BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END );
+ BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END );
+ BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END );
+ BABLM( BABL_BROWSER_NEXT_TAB, D(LGUI),D(LALT), T(RIGHT),U(LALT), U(LGUI),END );
+ BABLM( BABL_BROWSER_PREV_TAB, D(LGUI), D(RSFT), T(LEFT), U(RSFT), U(LGUI),END );
+ BABLM( BABL_BROWSER_URL_BAR, D(LGUI), T(L), U(LGUI),END );
+ BABLM( BABL_BROWSER_FORWARD, D(LGUI), T(RIGHT), U(LGUI),END );
+ BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END );
+ BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END );
+ BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END );
+ //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE
+ BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome
+ // Chrome
+ BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache
+ BABLM( BABL_BROWSER_FULLSCREEN, D(LGUI), D(LCTL), T(P), U(LCTL), U(LGUI),END ); //command shift F
+ BABLM( BABL_BROWSER_ZOOM_IN, D(LGUI), D(RSFT), T(EQL), U(RSFT), U(LGUI),END ); // ctr+ +
+ BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END );
+#endif
+#endif
+
+ return MACRO_NONE;
+#endif
+
+#ifdef EMACS_MODE
+
+ case EMACS_MODE:
+ switch(shortcut) {
+//probably should allow meta to not be ALT
+
+ BABLM( BABL_GO_LEFT_1C, T(LEFT), END );
+ BABLM( BABL_GO_RIGHT_1C, T(RIGHT), END );
+ BABLM( BABL_GO_LEFT_WORD, D(LALT), T(B), U(LALT), END );
+ BABLM( BABL_GO_RIGHT_WORD , D(LALT), T(F), U(LALT), END );
+ BABLM( BABL_GO_START_LINE , D(LCTL), T(A), U(LCTL), END );
+ BABLM( BABL_GO_END_LINE , D(LCTL), T(E), U(LCTL), END );
+ BABLM( BABL_GO_START_DOC , D(LALT), D(LSFT), T(COMM),U(LSFT), U(LALT) ,END );
+ BABLM( BABL_GO_END_DOC , D(LALT), D(LSFT), T(DOT), U(LSFT), U(LALT) ,END );
+ BABLM( BABL_GO_NEXT_LINE , D(LCTL), T(N), U(LCTL), END );
+ BABLM( BABL_GO_PREV_LINE , D(LCTL), T(P), U(LCTL), END );
+ BABLM( BABL_PGDN , D(LCTL), T(V), U(LCTL), END );
+ BABLM( BABL_PGUP , D(LALT), T(V), U(LALT), END );
+ BABLM( BABL_DEL_RIGHT_1C, D(LCTL), T(D), U(LCTL),END );
+ BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(BSPACE), U(LCTL), END );
+ BABLM( BABL_DEL_RIGHT_WORD , D(LALT), T(D), U(LALT), END );
+ BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END );
+ BABLM( BABL_DEL_TO_LINE_START, T(ESC), T(0), D(LCTL), T(K), U(LCTL), END );
+#ifndef BABL_MOVEMENTONLY
+ BABLM( BABL_UNDO , D(LCTL), T(X), U(LCTL),T(C), END );
+ BABLM( BABL_REDO , D(LCTL), T(X), U(LCTL),T(C), END ); // arguably
+ BABLM( BABL_CUT , D(LCTL), T(W), U(LCTL), END );
+ BABLM( BABL_COPY , D(LALT), T(W), U(LALT), END ); //really?
+ BABLM( BABL_PASTE , D(LCTL), T(Y), U(LCTL), END );
+ BABLM( BABL_SELECT_ALL ,D(LCTL), T(X), U(LCTL),T(H), END );
+ BABLM( BABL_FIND , D(LCTL), T(S), U(LCTL),END );
+ BABLM( BABL_FIND_NEXT , D(LCTL), T(S), U(LCTL),END );
+ BABLM( BABL_FIND_REPLACE , D(LALT),D(LSFT), T(5),U(LSFT), U(LALT), END );
+ BABLM( BABL_RUNAPP , D(LALT), T(X), U(LALT),T(S),T(H),T(E),T(L),T(L),END );// arguably
+ BABLM( BABL_SWITCH_APP_NEXT , D(LCTL), T(X), U(LCTL),T(RIGHT), END ); // arguably
+ BABLM( BABL_SWITCH_APP_LAST , D(LCTL), T(X), U(LCTL),T(LEFT), END ); // arguably
+ BABLM( BABL_CLOSE_APP , D(LCTL), T(X), U(LCTL),T(C),END );
+ BABLM( BABL_HELP , D(LCTL),T(H), U(LCTL),T(A),END); // start search in help
+#ifndef BABL_NOBROWSER
+/* you get to figure w3 out
+ BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END );
+ BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END );
+ BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END );
+ BABLM( BABL_BROWSER_NEXT_TAB, D(LGUI),D(LALT), T(RIGHT),U(LALT), U(LGUI),END );
+ BABLM( BABL_BROWSER_PREV_TAB, D(LGUI), D(RSFT), T(LEFT), U(RSFT), U(LGUI),END );
+ BABLM( BABL_BROWSER_URL_BAR, D(LGUI), T(L), U(LGUI),END );
+ BABLM( BABL_BROWSER_FORWARD, D(LGUI), T(RIGHT), U(LGUI),END );
+ BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END );
+ BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END );
+ BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END );
+ //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE
+ BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome
+ // Chrome
+ BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache
+ BABLM( BABL_BROWSER_FULLSCREEN, D(LGUI), D(LCTL), T(P), U(LCTL), U(LGUI),END ); //command shift F
+ BABLM( BABL_BROWSER_ZOOM_IN, D(LGUI), D(RSFT), T(EQL), U(RSFT), U(LGUI),END ); // ctr+ +
+ BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END );
+*/
+#endif
+#endif
+ break;
+
+ return MACRO_NONE;
+ }
+
+#endif
+
+
+#ifdef VI_MODE
+ case VI_MODE:
+// you have to track the modes yourself. Otherwise motion is awful (bell, bell, bell)
+
+
+ BABLM( BABL_GO_LEFT_1C , T(H), END );
+ BABLM( BABL_GO_RIGHT_1C , T(L), END );
+ BABLM( BABL_GO_LEFT_WORD , T(B),END );
+ BABLM( BABL_GO_RIGHT_WORD , T(W), END );
+ BABLM( BABL_GO_START_LINE , D(LSFT), T(6),U(LSFT), END ); //^
+ BABLM( BABL_GO_END_LINE , D(LSFT), T(4),U(LSFT) , END ); //$
+ BABLM( BABL_GO_START_DOC , T(G),T(G) ,END );
+ BABLM( BABL_GO_END_DOC , D(LSFT), T(G),U(LSFT),END );
+ BABLM( BABL_GO_NEXT_LINE , T(J), END );
+ BABLM( BABL_GO_PREV_LINE, T(K), END );
+ BABLM( BABL_PGDN ,D(LCTL), T(F), U(LCTL), END );
+ BABLM( BABL_PGUP , D(LCTL), T(B), U(LCTL), END );
+ BABLM( BABL_DEL_RIGHT_1C , T(X),END );
+ BABLM( BABL_DEL_LEFT_WORD , T(D),T(G),T(E),END );
+ BABLM( BABL_DEL_RIGHT_WORD , T(D),T(W),END );
+ BABLM( BABL_DEL_TO_LINE_END, T(D),D(LSFT), T(4),U(LSFT) ,END ); // d$
+ BABLM( BABL_DEL_TO_LINE_START, T(D),D(LSFT), T(6),U(LSFT) ,END );
+#ifndef BABL_MOVEMENTONLY
+ BABLM( BABL_UNDO , T(U), END );
+ BABLM( BABL_REDO , D(LCTL), T(R), U(LCTL), END );
+ BABLM( BABL_CUT , T(X), END );
+ BABLM( BABL_COPY , T(Y),END );
+ BABLM( BABL_PASTE , T(P), END );
+ BABLM( BABL_SELECT_ALL , D(LSFT), T(SCLN),U(LSFT),D(LSFT), T(5),U(LSFT),T(Y), END ); // wrong but helpful?
+ BABLM( BABL_FIND , T(SLASH),END );
+ BABLM( BABL_FIND_NEXT , T(N),END );
+ BABLM( BABL_FIND_REPLACE , D(LALT),D(LSFT), T(5),U(LSFT), U(LALT), END );
+ BABLM( BABL_RUNAPP,END );
+ BABLM( BABL_SWITCH_APP_NEXT ,END );
+ BABLM( BABL_SWITCH_APP_LAST ,END );
+ BABLM(BABL_CLOSE_APP, D(LSFT), T(SCLN),U(LSFT), T(Q), D(RSFT), T(1),U(RSFT), END );
+ BABLM(BABL_HELP, D(LSFT), T(SCLN),U(LSFT),T(H),END); // start search in help
+#ifndef BABL_NOBROWSER
+/* you get to figure this out
+ BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END );
+ BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END );
+ BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END );
+ BABLM( BABL_BROWSER_NEXT_TAB, D(LGUI),D(LALT), T(RIGHT),U(LALT), U(LGUI),END );
+ BABLM( BABL_BROWSER_PREV_TAB, D(LGUI), D(RSFT), T(LEFT), U(RSFT), U(LGUI),END );
+ BABLM( BABL_BROWSER_URL_BAR, D(LGUI), T(L), U(LGUI),END );
+ BABLM( BABL_BROWSER_FORWARD, D(LGUI), T(RIGHT), U(LGUI),END );
+ BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END );
+ BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END );
+ BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END );
+ //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE
+ BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome
+ // Chrome
+ BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache
+ BABLM( BABL_BROWSER_FULLSCREEN, D(LGUI), D(LCTL), T(P), U(LCTL), U(LGUI),END ); //command shift F
+ BABLM( BABL_BROWSER_ZOOM_IN, D(LGUI), T(PLUS), U(LGUI),END );
+ BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END );
+*/
+#endif
+#endif
+ return MACRO_NONE;
+#endif
+
+
+
+
+#ifdef READMUX_MODE
+// Readline command line editing + tmux windowing
+// I havent decided how much to do readline and how much tmux
+
+
+ case READMUX_MODE:
+
+ BABLM( BABL_GO_LEFT_1C , T(LEFT), END );
+ BABLM( BABL_GO_RIGHT_1C , T(RIGHT), END );
+ BABLM( BABL_GO_LEFT_WORD , D(LALT), T(B), U(LALT), END );
+ BABLM( BABL_GO_RIGHT_WORD , D(LALT), T(F), U(LALT), END );
+ BABLM( BABL_GO_START_LINE , D(LCTL), T(A), U(LCTL), END );
+ BABLM( BABL_GO_END_LINE , D(LCTL), T(E), U(LCTL), END );
+ //BABLM( BABL_GO_START_DOC ,END );// tmux?
+ //BABLM( BABL_GO_END_DOC ,END ); // tmux?
+ BABLM( BABL_GO_NEXT_LINE , D(LCTL), T(N), U(LCTL), END );
+ BABLM( BABL_GO_PREV_LINE , D(LCTL), T(P), U(LCTL), END );
+ BABLM( BABL_PGDN , T(PGDN), END );
+ BABLM( BABL_PGUP , T(PGUP), END );
+ BABLM( BABL_DEL_RIGHT_1C , D(LCTL), T(D), U(LCTL),END );
+ BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(W), U(LCTL), END );
+ BABLM( BABL_DEL_RIGHT_WORD , D(LALT), T(D), U(LALT), END );
+ BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END );
+ BABLM( BABL_DEL_TO_LINE_START, D(LCTL), T(U), U(LCTL), END );
+#ifndef BABL_MOVEMENTONLY
+ BABLM( BABL_UNDO , D(LALT), T(R), U(LALT) , END );
+ BABLM( BABL_REDO , D(LCTL), T(X), U(LCTL),T(C), END ); // arguably
+ BABLM( BABL_CUT , D(LCTL), T(K), U(LCTL), END ); // wrong half the time
+ //BABLM( BABL_COPY ,END );
+ BABLM( BABL_PASTE , D(LCTL), T(Y), U(LCTL), END );
+ BABLM( BABL_SELECT_ALL , D(LCTL), T(A), T(K), T(Y), U(LCTL) , END );
+ BABLM( BABL_FIND , D(LCTL), T(R), U(LCTL), END ); // search history
+ BABLM(BABL_FIND_NEXT, D(LCTL), T(S), U(LCTL), END );
+ //BABLM( BABL_FIND_REPLACE ,END );
+ BABLM( BABL_RUNAPP , D(LCTL), T(B), U(LCTL), T(C),END ); //tmux
+ BABLM( BABL_SWITCH_APP_NEXT , D(LCTL), T(B), U(LCTL), T(N),END ); //tmux
+ BABLM( BABL_SWITCH_APP_LAST , D(LCTL), T(B), U(LCTL), T(P),END ); //tmux
+ BABLM( BABL_CLOSE_APP , D(LCTL), T(B), U(LCTL), T(D),END); // usually what I want
+ // BABLM( BABL_HELP ,END );
+#ifndef BABL_NOBROWSER
+/* Add lynx shortcuts?
+ BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END );
+ BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END );
+ BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END );
+ BABLM( BABL_BROWSER_NEXT_TAB, D(LGUI),D(LALT), T(RIGHT),U(LALT), U(LGUI),END );
+ BABLM( BABL_BROWSER_PREV_TAB, D(LGUI), D(RSFT), T(LEFT), U(RSFT), U(LGUI),END );
+ BABLM( BABL_BROWSER_URL_BAR, D(LGUI), T(L), U(LGUI),END );
+ BABLM( BABL_BROWSER_FORWARD, D(LGUI), T(RIGHT), U(LGUI),END );
+ BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END );
+ BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END );
+ BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END );
+ //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE
+ BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome
+ // Chrome
+ BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache
+ BABLM( BABL_BROWSER_FULLSCREEN, D(LGUI), D(LCTL), T(P), U(LCTL), U(LGUI),END ); //command shift F
+ BABLM( BABL_BROWSER_ZOOM_IN, D(LGUI), T(PLUS), U(LGUI),END );
+ BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END );
+*/
+#endif
+#endif
+
+ return MACRO_NONE;
+
+#endif
+
+ default:
+ return MACRO_NONE;
+ }
+
+}
+
+
+#endif \ No newline at end of file
diff --git a/keyboards/handwired/MS-sculpt-mobile/babblePaste.h b/keyboards/handwired/MS-sculpt-mobile/babblePaste.h
new file mode 100644
index 0000000000..3067c854de
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/babblePaste.h
@@ -0,0 +1,238 @@
+/* A library to output the right key shortcut in any common app.
+Given a global variable babble_mode to show the environment and a
+key that calls the paste macro, do the right type of paste.
+
+Setting the bable_mode is done by another macro, or TBD interaction with the host.
+
+Huge thanks to https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
+and jeebak & algernon's keymap
+*/
+#ifndef _babblePaste_h_included__
+#define _babblePaste_h_included__
+#include "action_layer.h"
+#include "quantum_keycodes.h"
+#include "config.h"
+
+#ifdef USE_BABLPASTE
+
+/* ***************************
+
+// Uncomment any modes you want. Whatever mode = 0 will be the default on boot
+// Expect to get errors if you comment a feature out and leave it in your keymap.
+
+#define USE_BABLPASTE
+
+//#define MS_MODE 0 // Windows.
+//#define MAC_MODE 1
+//#define LINUX_MODE 2 //aka gnome+KDE
+//#define EMACS_MODE 3
+//#define VI_MODE 4
+//#define WORDSTAR_MODE 5
+//#define READMUX 6 // Readline and tmux
+
+// This removes everything but cursor movement
+//#define BABL_MOVEMENTONLY
+// and this just removes browser shortcuts
+//#define BABL_NOBROWSER
+****************************/
+
+
+// Uncomment if you need more free flash space
+// It removes everything but cursor movement
+//#define BABL_MOVEMENTONLY
+
+
+// Define starting number for BABL macros in the macro range.
+// Probably can start the default even lower
+#define BABL_START_NUM 50
+
+/* Macros handled by babblepaste. Most should be available for all platforms.
+Whatever isn't defined will NOP */
+enum {
+// Movement macros
+ // left & right
+ BABL_GO_LEFT_1C= BABL_START_NUM,
+ BABL_GO_RIGHT_1C,
+ BABL_GO_LEFT_WORD,
+ BABL_GO_RIGHT_WORD,
+ BABL_GO_START_LINE,
+ BABL_GO_END_LINE,
+ // now up & down
+ BABL_GO_START_DOC,
+ BABL_GO_END_DOC,
+ BABL_GO_NEXT_LINE,
+ BABL_GO_PREV_LINE,
+ BABL_PGDN,
+ BABL_PGUP,
+ // And the delete options
+ //BABL_DEL_LEFT_1C == backspace, so why bother.
+ BABL_DEL_RIGHT_1C, // usually = Del
+ BABL_DEL_LEFT_WORD,
+ BABL_DEL_RIGHT_WORD,
+ BABL_DEL_TO_LINE_END, // delete from cursor to end of line
+ BABL_DEL_TO_LINE_START, // delete from cursor to begining line
+#ifndef BABL_MOVEMENTONLY
+ // Cut & Paste
+ BABL_UNDO,
+ BABL_REDO,
+ BABL_CUT,
+ BABL_COPY,
+ BABL_PASTE,
+ BABL_SELECT_ALL,
+ /* not yet implemented
+ BABL_SWAP_LAST2C // swap last characters before the cursor
+ BABL_SWAP_LAST2W // Swap the last two words before the cursor
+ */
+ // find & replace
+ BABL_FIND,
+ BABL_FIND_NEXT,
+ BABL_FIND_REPLACE,
+ // GUI or app
+ BABL_RUNAPP,
+ BABL_SWITCH_APP_NEXT,
+ BABL_SWITCH_APP_LAST, // previous
+ BABL_CLOSE_APP,
+ BABL_HELP,
+
+#ifndef BABL_NOBROWSER
+ BABL_BROWSER_NEW_TAB,
+ BABL_BROWSER_CLOSE_TAB,
+ BABL_BROWSER_REOPEN_LAST_TAB,
+ BABL_BROWSER_NEXT_TAB,
+ BABL_BROWSER_PREV_TAB,
+ BABL_BROWSER_URL_BAR,
+ BABL_BROWSER_FORWARD,
+ BABL_BROWSER_BACK,
+ BABL_BROWSER_FIND,
+ BABL_BROWSER_BOOKMARK,
+ BABL_BROWSER_DEV_TOOLS, // hard one to remember
+ BABL_BROWSER_RELOAD,
+ BABL_BROWSER_FULLSCREEN,
+ BABL_BROWSER_ZOOM_IN,
+ BABL_BROWSER_ZOOM_OUT,
+
+#endif
+
+#endif
+// Macros for mode switching
+#ifdef MS_MODE
+ BABL_WINDOWS,
+#endif
+#ifdef MAC_MODE
+ BABL_MAC,
+#endif
+#ifdef LINUX_MODE
+ BABL_LINUX,
+#endif
+#ifdef EMACS_MODE
+ BABL_EMACS,
+#endif
+#ifdef VI_MODE
+ BABL_VI,
+#endif
+#ifdef READMUX_MODE
+ BABL_READLINE,
+#endif
+
+
+};
+
+// BUG, used to jump to babble functiion. Surely there is a way to calculate size of enum?
+#define BABL_NUM_MACROS 48+4 // 48 + # of defined modes.
+
+/* And all the shorthand keymap ready versions */
+// First the mode switching macros
+#ifdef MS_MODE
+#define B_WIN M(BABL_WINDOWS)
+#endif
+#ifdef MAC_MODE
+#define B_MAC M(BABL_MAC)
+#endif
+#ifdef LINUX_MODE
+#define B_LNX M(BABL_LINUX)
+#endif
+#ifdef EMACS_MODE
+#define B_EMAX M(BABL_EMACS)
+#endif
+#ifdef VI_MODE
+#define B_VI M(BABL_VI)
+#endif
+#ifdef READMUX_MODE
+#define B_READ M(BABL_READLINE)
+#endif
+
+// and all the movement & action.
+
+#define B_L1C M(BABL_GO_LEFT_1C)
+#define B_R1C M(BABL_GO_RIGHT_1C)
+#define B_L1W M(BABL_GO_LEFT_WORD)
+#define B_R1W M(BABL_GO_RIGHT_WORD)
+#define B_GSOL M(BABL_GO_START_LINE)
+#define B_GEOL M(BABL_GO_END_LINE)
+#define B_GTOP M(BABL_GO_START_DOC)
+#define B_GEND M(BABL_GO_END_DOC)
+#define B_DOWN M(BABL_GO_NEXT_LINE)
+#define B_UP M(BABL_GO_PREV_LINE)
+#define B_PGDN M(BABL_PGDN)
+#define B_PGUP M(BABL_PGUP)
+//#define B_BKSP M(BABL_DEL_LEFT_1C) == backspace so why bother.
+#define B_DEL M(BABL_DEL_RIGHT_1C) // usually = Del
+#define B_DLW M(BABL_DEL_LEFT_WORD)
+#define B_DRW M(BABL_DEL_RIGHT_WORD)
+#define B_DEOL M(BABL_DEL_TO_LINE_END) // delete from cursor to end of line
+#define B_DSOL M(BABL_DEL_TO_LINE_START) // delete from cursor to begining line
+#define B_UNDO M(BABL_UNDO)
+#define B_REDO M(BABL_REDO)
+#define B_CUT M(BABL_CUT)
+#define B_COPY M(BABL_COPY)
+#define B_PAST M(BABL_PASTE)
+#define B_SELA M(BABL_SELECT_ALL)
+#define B_FIND M(BABL_FIND)
+#define B_FINDN M(BABL_FIND_NEXT)
+#define B_FINDR M(BABL_FIND_REPLACE)
+#define B_RAPP M(BABL_RUNAPP)
+#define B_NAPP M(BABL_SWITCH_APP_NEXT)
+#define B_PAPP M(BABL_SWITCH_APP_LAST) // previous
+#define B_CAPP M(BABL_CLOSE_APP)
+#define B_HELP M(BABL_HELP)
+#define B_NTAB M(BABL_BROWSER_NEW_TAB)
+#define B_CTAB M(BABL_BROWSER_CLOSE_TAB)
+#define B_ROTB M(BABL_BROWSER_REOPEN_LAST_TAB)
+#define B_NXTB M(BABL_BROWSER_NEXT_TAB)
+#define B_PTAB M(BABL_BROWSER_PREV_TAB)
+#define B_NURL M(BABL_BROWSER_URL_BAR)
+#define B_BFWD M(BABL_BROWSER_FORWARD)
+#define B_BBAK M(BABL_BROWSER_BACK)
+#define B_BFND M(BABL_BROWSER_FIND)
+#define B_BOOK M(BABL_BROWSER_BOOKMARK)
+#define B_BDEV M(BABL_BROWSER_DEV_TOOLS) // hard one to remember
+#define B_BRLD M(BABL_BROWSER_RELOAD)
+#define B_BFUlL M(BABL_BROWSER_FULLSCREEN)
+#define B_ZMIN M(BABL_BROWSER_ZOOM_IN)
+#define B_ZMOT M(BABL_BROWSER_ZOOM_OUT)
+
+
+
+
+
+
+
+/* from action_macro.h
+typedef uint8_t macro_t;
+
+#define MACRO_NONE (macro_t*)0
+#define MACRO(...) ({ static const macro_t __m[] PROGMEM = { __VA_ARGS__ }; &__m[0]; })
+#define MACRO_GET(p) pgm_read_byte(p)
+
+#define BABL_MSTART (entry, os, macro...) ( const macro_t bablDict[entry][os] PROGMEM = { macro... }; )
+
+*/
+
+const macro_t *babblePaste(keyrecord_t *record, uint8_t shortcut);
+
+macro_t* switch_babble_mode( uint8_t id);
+
+
+#endif
+#endif
+
diff --git a/keyboards/handwired/MS-sculpt-mobile/babblePaste.txt b/keyboards/handwired/MS-sculpt-mobile/babblePaste.txt
new file mode 100644
index 0000000000..cf75e153e8
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/babblePaste.txt
@@ -0,0 +1,123 @@
+ BabblePaste is a library of common macros used to make sure that
+you can have one "paste" button on one layer, and it will do the
+right thing on any OS or app. Windows=Ctrl-V. Mac = Command-V and so on.
+
+The babblepaste library looks for the current status in a babble_mode global variable.
+To switch modes, run the switch_babble_mode() function, or a pre defined macro.
+Currently supported are Windows, OS X, Gnome/kde, Emacs, VI and readline,
+across 42+ common macro actions.
+
+
+###To use the library
+1) Paste the following into your config.h.
+
+//////Begin//////
+#define USE_BABLPASTE 1
+
+#ifdef USE_BABLPASTE
+/* define BabblePaste maps. Whatever = 0 will be the default. */
+// MAC_MODE 0
+// MS_MODE 1
+// LINUX_MODE 2
+// EMACS_MODE 3
+// VI_MODE 3
+// Readline and tmux
+// READMUX_MODE 2
+// WORDSTAR_MODE 5
+#endif
+
+// Uncomment these to remove options an free up flash space
+
+// This removes everything but cursor movement
+// BABL_MOVEMENTONLY
+// and this just removes browser shortcuts
+// BABL_NOBROWSER
+///////End///////
+
+2) Add the following to your keymap in the action_get_macro
+
+//////Begin//////
+#ifdef USE_BABLPASTE
+
+ if( id >= BABL_START_NUM && id < (BABL_START_NUM + BABL_NUM_MACROS ) ) {
+ if (record->event.pressed) { // is there a case where this isn't desired?
+
+ babblePaste ( record, id );
+ return MACRO_NONE;
+ }
+ }
+#endif
+///////End///////
+
+3) add Babbelpaste actions to your keymap. See the full list in babblePaste.h, or the
+list below
+B_L1C // go left 1 char
+B_R1C // go Right 1 char
+ B_L1W //GO_LEFT_1 WORD
+ B_R1W //BABL_GO_RIGHT_1 WORD
+ B_GSOL // BABL_GOTO_START of _LINE
+ B_GEOL // BABL_GOTO_END_LINE
+ B_GTOP //BABL_GOTO_START_DOC
+ B_GEND //BABL_GO_END_DOC
+ B_DOWN //BABL_GO_NEXT_LINE
+ B_UP // BABL_GO_PREV_LINE
+ B_PGDN //PGDN
+ B_PGUP //PGUP
+// B_BKSP //backspace so why bother.
+ B_DEL // DEL_RIGHT_1 Char // usually = Del
+ B_DLW // DEL_LEFT_ 1 WORD)
+ B_DRW //DEL_RIGHT_1 WORD
+ B_DEOL // delete from cursor to end of line
+ B_DSOL // delete from cursor to begining line
+ B_UNDO //UNDO
+ B_REDO // REDO
+ B_CUT // CUT)
+ B_COPY // COPY)
+ B_PAST // PASTE)
+ B_SELA // SELECT_ALL
+ B_FIND // FIND)
+ B_FINDN //FIND_NEXT)
+ B_FINDR // FIND_REPLACE)
+ B_RAPP // open application launcher
+ B_NAPP // switch to next app
+ B_PAPP // switch to previous app
+ B_CAPP // CLOSE_APP)
+ B_HELP // HELP)
+ B_NTAB // BROWSER_NEW_TAB)
+ B_CTAB //BROWSER_CLOSE_TAB)
+ B_ROTB //BROWSER_REOPEN_LAST_TAB)
+ B_NXTB //BROWSER_NEXT_TAB)
+ B_PTAB //BROWSER_PREV_TAB)
+ B_NURL //BROWSER_jump to URL_BAR)
+ B_BFWD // BROWSER_FORWARD (in history)
+ B_BBAK //BROWSER_BACK (in history)
+ B_BFND // BROWSER_FIND)
+ B_BOOK //BROWSER_New BOOKMARK)
+ B_BDEV //BROWSER_ Open DEV_TOOLS) // hard one to remember
+ B_BRLD // BROWSER_RELOAD Page
+ B_BFUlL // BROWSER_FULLSCREEN)
+ B_ZMIN // BROWSER_ZOOM_IN)
+ B_ZMOT //BROWSER_ZOOM_OUT)
+
+
+#### Development notes
+-Why a new function? Because it would make the keymap too ugly to put it there.
+-Why not return the macro to action_get_macro? Because I kept running into scope problems
+and pointers to the wrong type.
+-Why not an array of arrays as a lookup instead of a function? That would allow you
+to store the lookup table in PROGMEM. True, but that takes more pre-processor skill
+than I had.
+
+-Have you tested this on every platform? No. Submit a patch.
+
+
+### Next steps for someone.
+Make it easier to pair macros with modifiers. So key foo will jump to start of line, and
+Shift(foo) will jump to the first tab in a browser.
+
+## Thanks
+
+Thanks to https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
+and https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/jeebak/keymap.c
+And of course QMK...
+
diff --git a/keyboards/handwired/MS-sculpt-mobile/config.h b/keyboards/handwired/MS-sculpt-mobile/config.h
new file mode 100644
index 0000000000..f89514278d
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/config.h
@@ -0,0 +1,100 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Microsoftplus
+#define DESCRIPTION 6000
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+#ifdef ASTAR
+#define PRODUCT sculpt mobile astar
+ /*0 1 2 3 4 5 6 7 8 */
+#define MATRIX_ROW_PINS {D7, C6, D4, D0, D1, D3, D2, E2}
+/* A B C D E F G H I J K L M N O P Q R */
+#define MATRIX_COL_PINS {B4, B5, E6, B7, B6, D6, C7, F7, F6, F4,F5, F1,F0, D5, B0, B1, B2, B3}
+
+#else
+#define PRODUCT sculpt mobile teensypp
+/* 0 1 2 3 4 5 6 7 */
+#define MATRIX_ROW_PINS { F7,F6,F4,F5,F3,F2,F1,F0}
+/* A B C D E F G H I J K L M N O P Q R */
+#define MATRIX_COL_PINS { B7, D0, D1, D2, D3, D4, D5, D6, D7, E0,E1,C1, C0, C3, C2, C5, C4,C7}
+#define UNUSED_PINS { B6,B5,B4,B3,B2,B1,B0 }
+
+
+#endif
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define PREVENT_STUCK_MODIFIERS
+
+#endif
diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/default/Makefile b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/Makefile
new file mode 100644
index 0000000000..8b829218b2
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../../Makefile
+endif
diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/default/config.h b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/config.h
new file mode 100644
index 0000000000..8893d122e0
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/default/keymap.c b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/keymap.c
new file mode 100644
index 0000000000..ab09dcdd1c
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/keymap.c
@@ -0,0 +1,64 @@
+#include "MS-sculpt-mobile.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/*
+*
+* |ESC | F1 | F2 | F3 | F4 | F5 | F6 | f7 | F8 | F9 | F10| F11| F12|Vol-|Vol+|Mute|
+* -------------------------------------------------------------------------------'
+* | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace| Del |
+* --------------------------------------------------------------------------
+* | tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | |
+* -------------------------------------------------------------------------------'
+* | caps | a | s | d | f | g | h | j | k | l | ; | ' | enter |PgUp|
+* --------------------------------------------------------------------------------
+* |Lsft | z | x | c | v | b | n | m | , | . | / | Rsft| Up| PgDn|
+* ---------------------------------------------------------------------------------
+* |Lctl |Lgui |Lalt | Space |Ralt | FN | Rctl |Left|Down|Rght|
+* ---------------------------------------------------------------------------------
+*/
+
+[0] = KEYMAP( \
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, KC_MUTE,\
+ KC_GRAVE, KC_1, KC_2, KC_3 ,KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQL, KC_BSPC, KC_DEL,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,\
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,\
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, RSFT(KC_1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT
+)
+
+};
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/default/readme.md b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/readme.md
new file mode 100644
index 0000000000..e67ddc6fec
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for microsoft-sculpt-mobile
diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/Makefile b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/Makefile
new file mode 100644
index 0000000000..1209ad7814
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../../Makefile
+endif
diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/config.h b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/config.h
new file mode 100644
index 0000000000..8cf4202cda
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/config.h
@@ -0,0 +1,32 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define USE_BABLPASTE
+
+// Expect to get errors if you comment a feature out and leave it in your keymap.
+
+#ifdef USE_BABLPASTE
+//define BabblePaste maps
+// Windows.
+#define MAC_MODE 0
+#define MS_MODE 1
+//aka gnome+KDE
+//#define LINUX_MODE 2
+//#define EMACS_MODE 3
+#define VI_MODE 3
+// Readline and tmux
+#define READMUX_MODE 2
+//#define WORDSTAR_MODE 5
+#endif
+
+// Uncomment if you need more free flash space
+
+// This removes everything but cursor movement
+//#define BABL_MOVEMENTONLY
+// and this just removes browser shortcuts
+//#define BABL_NOBROWSER
+
+// place overrides here
+#endif
diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/keymap.c b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/keymap.c
new file mode 100644
index 0000000000..395a9fb470
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/keymap.c
@@ -0,0 +1,272 @@
+#include "MS-sculpt-mobile.h"
+#include "action_layer.h"
+#include "action_util.h"
+#include "babblePaste.h"
+
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif
+
+#define _QWR 0
+#define _CDH 2
+#define _SYM 3
+#define _MOV 4
+#define _TRAN 5
+
+
+enum layer_keycodes {
+QWR,
+CDH,
+SYM,
+MOV,
+NUM,
+TRAN
+};
+
+
+// Shorter spacing
+#define XXXX KC_NO
+#define ____ KC_TRNS
+
+// Custom macros
+
+/* Fn Keys */
+#define TT_SYM MO(_SYM)
+#define TT_MOV KC_FN2
+#define TT_NUM MO(_NUM)
+#define SSFT ACTION_MODS_ONESHOT(MOD_LSFT)
+
+enum macro_keycodes {
+DHPASTE=1,
+VIBRK,
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* QWERTY
+*
+* |ESC | F1 | F2 | F3 | F4 | F5 | F6 | f7 | F8 | F9 | F10| F11| F12|Vol-|Vol+|_CDH|
+* -------------------------------------------------------------------------------'
+* | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace| Del|
+* ---------------------------------------------------------------------------
+* | tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | |
+* -------------------------------------------------------------------------------'
+* |Bak/Mov| a | s | d | f | g | h | j | k | l | ; | ' | enter |PgUp|
+* --------------------------------------------------------------------------------
+* |Lsft | z | x | c | v | b | n | m | , | . | / | Rsft| Up| PgDn|
+* ---------------------------------------------------------------------------------
+* |Lctl |Lgui |Lalt | Space/Sym | GUI | Sym | Rctl |Left|Down|Rght|
+* ---------------------------------------------------------------------------------
+*/
+
+[_QWR] = KEYMAP( \
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, CDH,\
+ KC_ESC, KC_1, KC_2, KC_3 ,KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQL, KC_BSPC, KC_DEL,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\
+ TT_MOV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,\
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT, KC_UP, KC_PGDN,\
+ KC_LCTL, KC_LGUI, KC_LALT, KC_FN1, KC_RGUI,TT_SYM,KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT
+),
+
+[_CDH] = KEYMAP (\
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, QWR, \
+ KC_ESC, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, ____, ____, ____,\
+ TT_MOV, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_2,\
+ KC_LSFT, KC_Z, KC_X, KC_C, M(DHPASTE), KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, ____, KC_1,\
+ ____, ____, ____ , KC_FN1, ____, ____, ____, ____, ____, ____
+
+),
+
+
+/* SYM
+*
+* |ESC | F1 | F2 | F3 | F4 | F5 | F6 | f7 | F8 | F9 | F10| F11| F12|Vol-|Vol+|_CDH|
+* -------------------------------------------------------------------------------'
+* | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace|Del |
+* --------------------------------------------------------------------------
+* | ESC: | ^ | { | } | @ | % | | [ | ( | ) | _ | [ | ] | \ | |
+* -------------------------------------------------------------------------------'
+* |Bak/Mov| ! | # | 0 | = | { | } | - | 1 | + | ] | ` | enter |PgUp|
+* --------------------------------------------------------------------------------
+* |Lsft | ; | ~ | : | ~ | "|"| $ | * | | . | / | Rsft| Up| PgDn|
+* ---------------------------------------------------------------------------------
+* |Lctl |Lgui |Lalt | Space/Sym | GUI | Sym | Rctl |Left|Down|Rght|
+* ---------------------------------------------------------------------------------
+*/
+
+[_SYM] = KEYMAP (\
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ M(VIBRK), KC_CIRC, KC_LCBR, KC_RCBR,KC_AT, KC_PERC, ____, KC_LBRC,KC_LPRN,KC_RPRN,KC_UNDS, ____, ____, ____,\
+ ____, KC_EXLM, KC_HASH, KC_0, KC_EQL, KC_LCBR, KC_RCBR,KC_MINS,KC_1, KC_PLUS,KC_RBRC, KC_GRV, ____, ____,\
+ ____, KC_SCLN, KC_TILDE, KC_COLN, KC_TILDE, KC_PIPE, KC_DLR, KC_ASTR, ____, KC_DOT , KC_SLSH, ____, ____, ____,\
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____
+),
+/*
+* |ESC | MAC| Win|RdLn| VI | | | | | | | | | | | |
+* -------------------------------------------------------------------------------'
+* | | | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace| Del|
+* ---------------------------------------------------------------------------
+* | tab | | |Find| |pTab |DSOL|DelW| Up |DelW|DEOL| [ | ] | \ | |
+* -------------------------------------------------------------------------------'
+* |Bak/Mov| | | | |nTab |GSOL| <- | Dwn | -> | EOL | ' | enter |PgUp|
+* --------------------------------------------------------------------------------
+* |Lsft |Undo| Cut|Copy|Pste| | | | | | / | Rsft| Up| PgDn|
+* ---------------------------------------------------------------------------------
+* |Lctl |Lgui |Lalt | Space/Sym | GUI | Sym | Rctl |Left|Down|Rght|
+* ---------------------------------------------------------------------------------
+*/
+
+[_MOV] = KEYMAP (\
+ ____, B_MAC,B_WIN,B_READ, B_VI, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, ____, B_PAPP, B_NAPP, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, B_UNDO, ____, B_BFND, ____, B_PTAB, B_DSOL, B_DLW, B_UP, B_DRW, B_DEOL, ____, ____, ____, \
+ ____, B_SELA, B_BRLD, ____, ____, B_NXTB, B_GSOL, B_L1C, B_DOWN, B_R1C,B_GEOL, ____, ____, ____,\
+ ____, B_UNDO,B_CUT, B_COPY, B_PAST, B_PAST, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____
+),
+
+[_TRAN] = KEYMAP (\
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____
+)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+[1] = ACTION_LAYER_TAP_KEY(_SYM,KC_SPACE),
+[2] = ACTION_LAYER_TAP_KEY(_MOV,KC_BSPC)
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2] = SONG(STARTUP_SOUND);
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+#endif
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWR:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+ #endif
+ layer_off(_CDH);
+ }
+ return false;
+ break;
+
+ case CDH:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+ #endif
+ layer_on(_CDH);
+ }
+ return false;
+ break;
+
+ case SYM:
+ if (record->event.pressed) {
+ layer_on(_SYM);
+ } else {
+ layer_off(_SYM);
+ }
+ return false;
+ break;
+
+ }
+ return true;
+
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+
+/* If id is in the range of BABL macros, call the babl function */
+/* Any clever remapping with modifiers should happen here e.g. shift bablkey does opposite*/
+#ifdef USE_BABLPASTE
+
+ if( id >= BABL_START_NUM && id < (BABL_START_NUM + BABL_NUM_MACROS ) ) {
+ if (record->event.pressed) { // is there a case where this isn't desired?
+
+ babblePaste ( record, id );
+ return MACRO_NONE;
+ }
+ }
+#endif
+
+
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+
+ /* Colemak mod-dh moves the D key to the qwerty V position
+ This hack makes apple-V_position do what I mean */
+ case DHPASTE:
+ if(keyboard_report->mods & MOD_BIT(KC_LGUI) ) {
+ if (record->event.pressed) {
+ clear_keyboard_but_mods();
+ register_code(KC_V);
+ } else {
+ unregister_code(KC_V);
+ }
+ } else {
+ if (record->event.pressed) {
+ register_code(KC_D);
+ } else {
+ unregister_code(KC_D);
+ }
+ }
+ break;
+
+ case VIBRK: // vi esc:
+ if (record->event.pressed) {
+ return MACRO( T(ESC),D(LSFT),T(SCLN),U(LSFT), END );
+ }
+ break;
+
+
+
+
+ default:
+ return MACRO_NONE;
+ }
+
+
+return MACRO_NONE;
+};
+
+
+
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+
+}
+
+
+void led_set_user(uint8_t usb_led) {
+
+}
+
+
+
+
+
+
diff --git a/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/readme.md b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/readme.md
new file mode 100644
index 0000000000..96ee0e77a5
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/keymaps/milestogo/readme.md
@@ -0,0 +1 @@
+# A more programmer oriented keymap for microsoft-sculpt-mobile
diff --git a/keyboards/handwired/MS-sculpt-mobile/readme.md b/keyboards/handwired/MS-sculpt-mobile/readme.md
new file mode 100644
index 0000000000..d435b449fb
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/readme.md
@@ -0,0 +1,58 @@
+
+This is a way to take a Microsoft ergonomic bluetooth keyboard, and make it
+into a hard-wired keyboard running QMK.
+
+The keyboard is known under several different names:
+Mobile Bluetooth 5000, Mobile 6000, Sculpt mobile, and Asus rebranded
+
+I had a stack of them,since they're cheap on ebay, travel well, and are just ergo enough.
+
+The ribbon cable is 1mm pitch, which is hard to hand solder. I bought a cheap set of
+"pitch adapter" boards https://www.amazon.com/Double-Sided-0-4mm-1-0-Adapter-60mmx38mm/dp/B00OK42118
+
+Cut the original ribbon cable sockets off the bluetooth board using a razor, they're hard to desolder.
+They're also allow the cable to be inserted on top or bottom.
+
+If I was going to do it again, I'd make the MCU connection come out the top of the keyboard
+and avoid the wires dangling out the bottom.
+
+As I was debugging the matrix, I started to get random failures. In desparation I tried a second MCU,
+but had the same problems. It turns out that the ribbon cable connections can get worn. Shave a
+half millimeter off the end of the ribbon cable & the errors go away.
+
+My method for discovering the matrix was to set up a KEYMAP macro that included all pins.
+See MATRIX_TESTING_KEYMAP if you need it. Then set up a keymap that has all printable symbols
+in the first 4 rows. test each key & record output. Then switch the printable symbols to the
+bottom 4 rows & repeat. This was enough to show the matrix.
+
+
+The full original keymap for the sculpt is
+ A B C D E F G H --->
+0 b n m , . /
+1 g h "
+2 7 8 9 0 Del PgUp
+3 p [ ] \
+4 y u i o
+5 ~ - += j k l ; 5
+6 a s d q w e, Up left
+7 F7 F8 F9 F10 F11 F12 f
+
+-----> I J K L M N O P Q R
+0 Caps FN
+1 Vol+ mute Rctl vol- pgdn LCTL
+2 Rshift LShift
+3 Ralt LAlt
+4 LGUI
+5 6 bakspc 1 2 3 4 F4 F5 F6
+6 Down right spc F1 F2 F3 tab
+7 r t z x c v enter Esc
+
+This works with 18 cols + 8 rows on a Teensy++, or Arm based Teensy.
+
+The Astar mini has all pins exposed , so you can do 18x8
+If you want a speaker, LEDs &etc, you'll need to free up a pin. I recommend joining columns
+R and L to the same pin.
+
+Building - add ASTAR=1 to the compile line or leave out for teensy2++
+
+
diff --git a/keyboards/handwired/MS-sculpt-mobile/rules.mk b/keyboards/handwired/MS-sculpt-mobile/rules.mk
new file mode 100644
index 0000000000..680389c846
--- /dev/null
+++ b/keyboards/handwired/MS-sculpt-mobile/rules.mk
@@ -0,0 +1,48 @@
+
+## Project specific files
+SRC= babblePaste.c
+
+
+ifdef ASTAR
+ CFLAGS=-D ASTAR
+ OPT_DEFS += -DBOOTLOADER_SIZE=4096
+ MCU = atmega32u4
+ OPT_DEFS += -DCATERINA_BOOTLOADER
+ SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \
+ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+
+else
+ MCU = at90usb1286
+ OPT_DEFS += -DBOOTLOADER_SIZE=2048
+ SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+endif
+
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+
+
+USB ?= /dev/cu.usbmodem14141
+
+
+
+upload: build
+ $(SCULPT_UPLOAD_COMMAND)
diff --git a/keyboards/handwired/magicforce68/Makefile b/keyboards/handwired/magicforce68/Makefile
new file mode 100644
index 0000000000..191c6bb664
--- /dev/null
+++ b/keyboards/handwired/magicforce68/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/handwired/magicforce68/README.md b/keyboards/handwired/magicforce68/README.md
new file mode 100644
index 0000000000..4f0ccecf99
--- /dev/null
+++ b/keyboards/handwired/magicforce68/README.md
@@ -0,0 +1,20 @@
+Magicforce 68 Handwired
+=======================
+
+This firmware is for a Magicforce 68 that's had its PCB removed and is handwired with an Arduino Micro. NOTE: The Arduino Micro is different than the Arduino *Pro* Micro.
+
+## Wiring Layout
+
+![Wiring Layout](wiring-layout.png)
+
+## Pinout
+
+The following pins are used:
+- Columns 1-15: B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6
+- Rows 1-5: F0, F1, F4, F5, F6
+
+## Compiling and loading the firmware
+
+To build the firmware, run `make`.
+
+To flash the firemware onto the microcontroller, run `make avrdude`, and press the reset button.
diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h
new file mode 100644
index 0000000000..1e2b7d3e73
--- /dev/null
+++ b/keyboards/handwired/magicforce68/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Hexwire
+#define PRODUCT Magicforce 68
+#define DESCRIPTION Handwired Magicforce 68
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
+#define MATRIX_COL_PINS { B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/magicforce68/keymaps/default/keymap.c b/keyboards/handwired/magicforce68/keymaps/default/keymap.c
new file mode 100644
index 0000000000..22553f714c
--- /dev/null
+++ b/keyboards/handwired/magicforce68/keymaps/default/keymap.c
@@ -0,0 +1,67 @@
+#include "magicforce68.h"
+
+#define _QWERTY 0
+#define _FN1 1
+#define _FN2 2
+#define KC_ KC_TRNS
+#define KC_X0 LT(_FN2, KC_GRV)
+#define KC_X1 MO(_FN1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
+ ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , INS ,PGUP,
+ /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| |----`----| */
+ TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , DEL ,PGDN,
+ /*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| `----`----' */
+ X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER ,
+ /*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| ,----. */
+ LSFT , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSFT , UP ,
+ /*|---------`----`----`----`----`----`----`----`----`----`----`-------------.--|----|----. */
+ LCTL ,LGUI ,LALT , SPACE , X1 ,RALT ,RCTL , LEFT,DOWN,RGHT
+ /*`-----+-----+-----+------------------------------+------+-----+-----' `----+----+----' */
+ ),
+
+ [_FN1] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
+ GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME,
+ /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */
+ , , , UP , , , , , , , , , , , VOLD,END,
+ /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */
+ , ,LEFT,DOWN,RGHT, , , , , , , , ,
+ /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */
+ , , , , , , ,MUTE, , , , , MUTE,
+ /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
+ , , , , , , , MPRV,MPLY,MNXT
+ /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */
+ ),
+
+ [_FN2] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
+ GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME,
+ /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */
+ , , , UP , , , , 7 , 8 , 9 , , , , , VOLD,END,
+ /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */
+ , ,LEFT,DOWN,RGHT, , , 4 , 5 , 6 , , , ,
+ /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */
+ , , , , , , 0 , 1 , 2 , 3 , , , MUTE,
+ /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
+ , , , , , , , MPRV,MPLY,MNXT
+ /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */
+ )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
diff --git a/keyboards/handwired/magicforce68/magicforce68.c b/keyboards/handwired/magicforce68/magicforce68.c
new file mode 100644
index 0000000000..84b1007e2c
--- /dev/null
+++ b/keyboards/handwired/magicforce68/magicforce68.c
@@ -0,0 +1,8 @@
+#include "magicforce68.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
diff --git a/keyboards/handwired/magicforce68/magicforce68.h b/keyboards/handwired/magicforce68/magicforce68.h
new file mode 100644
index 0000000000..cfcdce38d5
--- /dev/null
+++ b/keyboards/handwired/magicforce68/magicforce68.h
@@ -0,0 +1,20 @@
+#ifndef MAGICFORCE68_H
+#define MAGICFORCE68_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K2E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K3E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, \
+ K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \
+ ) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
+}
+
+#endif \ No newline at end of file
diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk
new file mode 100644
index 0000000000..e897ef2523
--- /dev/null
+++ b/keyboards/handwired/magicforce68/rules.mk
@@ -0,0 +1,83 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif
+
+avrdude: build
+ ls /dev/tty* > /tmp/1; \
+ echo "Reset your Pro Micro now"; \
+ while [[ -z $$USB ]]; do \
+ sleep 1; \
+ ls /dev/tty* > /tmp/2; \
+ USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+ done; \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude
diff --git a/keyboards/handwired/magicforce68/wiring-layout.png b/keyboards/handwired/magicforce68/wiring-layout.png
new file mode 100644
index 0000000000..816b10b2b5
--- /dev/null
+++ b/keyboards/handwired/magicforce68/wiring-layout.png
Binary files differ
diff --git a/keyboards/handwired/numpad20/Makefile b/keyboards/handwired/numpad20/Makefile
new file mode 100644
index 0000000000..191c6bb664
--- /dev/null
+++ b/keyboards/handwired/numpad20/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h
new file mode 100644
index 0000000000..847f2111f5
--- /dev/null
+++ b/keyboards/handwired/numpad20/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xBB80
+#define PRODUCT_ID 0x0504
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Hexwire
+#define PRODUCT Numpad 20
+#define DESCRIPTION Handwired 4x5 numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F6, B1, B3, B6, B5 }
+#define MATRIX_COL_PINS { D1, D0, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/numpad20/keymaps/default/keymap.c b/keyboards/handwired/numpad20/keymaps/default/keymap.c
new file mode 100644
index 0000000000..37031206a9
--- /dev/null
+++ b/keyboards/handwired/numpad20/keymaps/default/keymap.c
@@ -0,0 +1,16 @@
+#include "numpad20.h"
+
+#define KC_ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = COMPACT_KEYMAP(
+ LEFT,RGHT, UP ,DOWN, \
+ P7 , P8 , P9 ,PLUS, \
+ P4 , P5 , P6 ,MINS, \
+ P1 , P2 , P3 , ENT, \
+ P0 ,DOT ,RGHT, TAB \
+ )
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/keyboards/handwired/numpad20/numpad20.c b/keyboards/handwired/numpad20/numpad20.c
new file mode 100644
index 0000000000..101cf2cb4b
--- /dev/null
+++ b/keyboards/handwired/numpad20/numpad20.c
@@ -0,0 +1,8 @@
+#include "numpad20.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
diff --git a/keyboards/handwired/numpad20/numpad20.h b/keyboards/handwired/numpad20/numpad20.h
new file mode 100644
index 0000000000..191979be0d
--- /dev/null
+++ b/keyboards/handwired/numpad20/numpad20.h
@@ -0,0 +1,20 @@
+#ifndef NUMPAD20_H
+#define NUMPAD20_H
+
+#include "quantum.h"
+
+#define COMPACT_KEYMAP( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, K13, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, K33, \
+ K40, K41, K42, K43 \
+ ) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03 }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13 }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23 }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33 }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_##K43 } \
+}
+
+#endif \ No newline at end of file
diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk
new file mode 100644
index 0000000000..e897ef2523
--- /dev/null
+++ b/keyboards/handwired/numpad20/rules.mk
@@ -0,0 +1,83 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif
+
+avrdude: build
+ ls /dev/tty* > /tmp/1; \
+ echo "Reset your Pro Micro now"; \
+ while [[ -z $$USB ]]; do \
+ sleep 1; \
+ ls /dev/tty* > /tmp/2; \
+ USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+ done; \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude
diff --git a/keyboards/handwired/ortho5x13/Makefile b/keyboards/handwired/ortho5x13/Makefile
new file mode 100644
index 0000000000..191c6bb664
--- /dev/null
+++ b/keyboards/handwired/ortho5x13/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/handwired/ortho5x13/config.h b/keyboards/handwired/ortho5x13/config.h
new file mode 100644
index 0000000000..f85159596c
--- /dev/null
+++ b/keyboards/handwired/ortho5x13/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xBB80
+#define PRODUCT_ID 0x050D
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Hexwire
+#define PRODUCT Ortho 5x13
+#define DESCRIPTION Handwired 5x13 ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/ortho5x13/keymaps/default/keymap.c b/keyboards/handwired/ortho5x13/keymaps/default/keymap.c
new file mode 100644
index 0000000000..c1262a83d7
--- /dev/null
+++ b/keyboards/handwired/ortho5x13/keymaps/default/keymap.c
@@ -0,0 +1,289 @@
+#include "ortho5x13.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
+ LOWER,
+ RAISE,
+ BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define KC_L1 LOWER
+#define KC_L2 RAISE
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,------------------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * | ` | A | S | D | F | G | H | J | K | L | ; | ' | \ |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | Up |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Hyper| Ctrl | Alt | GUI |Lower | Space |Raise | Bksp |Shift | Left | Down |Right |
+ * `------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = COMPACT_KEYMAP(
+ //,----+----+----+----+----+----+----+----+----+----+----+----+----.
+ ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL ,
+ //|----+----+----+----+----+----+----+----+----+----+----+----+----|
+ TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC,
+ //|----+----+----+----+----+----+----+----+----+----+----+----+----|
+ GRV , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,BSLS,
+ //|----+----+----+----+----+----+----+----+----+----+----+----+----|
+ LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENT , UP ,
+ //|----+----+----+----+----+---------+----+----+----+----+----+----|
+ HYPR,LCTL,LALT,LGUI, L1 , SPACE , L2 ,BSPC,RSFT,LEFT,RGHT,DOWN
+ //`----+----+----+----+----+---------+----+----+----+----+----+----'
+ ),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | R | S | T | D | H | N | E | I | O | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL},
+ {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
+ {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab | " | , | . | P | Y | F | G | C | R | L | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | O | E | U | I | D | H | T | N | S | / |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL},
+ {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
+ {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
+ {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
+ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+ {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+ {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL},
+ {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | Reset| | | | | | | | | | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Audoff|Aud on|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | |Voice-|Voice+|Musoff|Mus on| | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+ {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
+ {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
+ {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______},
+ {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_startup[][2] = {
+ {NOTE_B5, 20},
+ {NOTE_B6, 8},
+ {NOTE_DS6, 20},
+ {NOTE_B6, 8}
+};
+
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+ #endif
+ persistant_default_layer_set(1UL<<_DVORAK);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case BACKLIT:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ #ifdef BACKLIGHT_ENABLE
+ backlight_step();
+ #endif
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ return false;
+ break;
+ }
+ return true;
+};
+
+void matrix_init_user(void) {
+ #ifdef AUDIO_ENABLE
+ startup_user();
+ #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+ _delay_ms(20); // gets rid of tick
+ PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+ PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+ _delay_ms(150);
+ stop_all_notes();
+}
+
+void music_on_user(void)
+{
+ music_scale_user();
+}
+
+void music_scale_user(void)
+{
+ PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif \ No newline at end of file
diff --git a/keyboards/handwired/ortho5x13/ortho5x13.c b/keyboards/handwired/ortho5x13/ortho5x13.c
new file mode 100644
index 0000000000..cf8352cc43
--- /dev/null
+++ b/keyboards/handwired/ortho5x13/ortho5x13.c
@@ -0,0 +1,8 @@
+#include "ortho5x13.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
diff --git a/keyboards/handwired/ortho5x13/ortho5x13.h b/keyboards/handwired/ortho5x13/ortho5x13.h
new file mode 100644
index 0000000000..d442212fe9
--- /dev/null
+++ b/keyboards/handwired/ortho5x13/ortho5x13.h
@@ -0,0 +1,36 @@
+#ifndef ORTHO5X13_H
+#define ORTHO5X13_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+ k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c }, \
+ { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b, k3c }, \
+ { k40, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4a, k4b, k4c } \
+}
+
+#define COMPACT_KEYMAP( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+ k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c \
+) \
+{ \
+ { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, KC_##k0c }, \
+ { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, KC_##k1c }, \
+ { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, KC_##k2c }, \
+ { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k35, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b, KC_##k3c }, \
+ { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45, KC_NO, KC_##k47, KC_##k48, KC_##k49, KC_##k4a, KC_##k4b, KC_##k4c } \
+}
+
+#endif \ No newline at end of file
diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk
new file mode 100644
index 0000000000..e897ef2523
--- /dev/null
+++ b/keyboards/handwired/ortho5x13/rules.mk
@@ -0,0 +1,83 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif
+
+avrdude: build
+ ls /dev/tty* > /tmp/1; \
+ echo "Reset your Pro Micro now"; \
+ while [[ -z $$USB ]]; do \
+ sleep 1; \
+ ls /dev/tty* > /tmp/2; \
+ USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+ done; \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude
diff --git a/keyboards/handwired/promethium/keymaps/priyadi/README.md b/keyboards/handwired/promethium/keymaps/priyadi/README.md
index 37c2be6f99..ddeaed939e 100644
--- a/keyboards/handwired/promethium/keymaps/priyadi/README.md
+++ b/keyboards/handwired/promethium/keymaps/priyadi/README.md
@@ -13,7 +13,7 @@ Main layer modifications from default Planck layout:
* Lower & Raise is now called Num and Fun.
* OS & Left keys become another thumb modifier: Empty & Greek (Empty because I used this for another use and my muscle memory is not adapted to it yet)
-On Promethium, Trackpoint is enabled on PD2 and PD2. We impersonate a Thinkpad keyboard to be able to use Thinkpad driver on Windows (still needs verification).
+On Promethium, Trackpoint is enabled on PD2 and PD3. We impersonate a Thinkpad keyboard to be able to use Thinkpad driver on Windows (still needs verification).
AltGr & Compose dual use key. Tap for Compose (mapped to Scroll Lock in hardware) and press for AltGr.
diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
index 2c43f98847..cf7c67339d 100644
--- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
+++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
@@ -51,8 +51,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define KC_WWWF KC_WWW_FORWARD
// hybrid right-alt & scroll lock (mapped to Compose in OS)
-#undef KC_RALT
-#define KC_RALT MT(MOD_RALT, KC_SLCK)
+#define C_RALT MT(MOD_RALT, KC_SLCK)
+
+// dual use right-shift & del key
+// #define C_RSFT MT(MOD_RSFT, KC_DEL)
bool capslock = false;
#ifdef DOUBLESPACE_LAYER_ENABLE
@@ -572,7 +574,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT ,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LALT, KC_LGUI, EMPTY, NUM, LSPACE, RSPACE, FUN, GREEK, KC_RGUI, KC_RALT, KC_RCTL
+ KC_LCTL, KC_LALT, KC_LGUI, EMPTY, NUM, LSPACE, RSPACE, FUN, GREEK, KC_RGUI, C_RALT, KC_RCTL
),
/* Dvorak
@@ -664,16 +666,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | * | \ | - | = | / | ≠ | ( | ) | < | > | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
- * | & | ^ | | | _ | + | ? | ± | [ | ] | { | } | : |
+ * | & | ^ | | | _ | + | ? | ± | [ | ] | { | } | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | | | | | | |
+ * | | | | | | | | | | : | |
* `-----------------------------------------------------------------------------------'
*/
[_PUNC] = KEYMAP(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, X(LTEQ), X(GTEQ), _______,
KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, X(NOTEQ),KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, _______,
- KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, X(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, KC_COLN,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, X(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, _______
),
/* Num
@@ -682,33 +684,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | ` | * | \ | - | = | / | B | 4 | 5 | 6 | E | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
- * | & | ^ | | | _ | + | ? | C | 1 | 2 | 3 | F | : |
+ * | & | ^ | | | _ | + | ? | C | 1 | 2 | 3 | F | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | | | 0 | , | . | x | |
+ * | | | x | | | | | 0 | , | . | : | |
* `-----------------------------------------------------------------------------------'
*/
[_NUM] = KEYMAP(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, S(KC_A), KC_7, KC_8, KC_9, S(KC_D), _______,
KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, S(KC_B), KC_4, KC_5, KC_6, S(KC_E), _______,
- KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, S(KC_C), KC_1, KC_2, KC_3, S(KC_F), KC_COLN,
- _______, _______, _______, _______, _______, _______, _______, FUN0 , KC_COMM, KC_DOT, KC_X, _______
+ KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, S(KC_C), KC_1, KC_2, KC_3, S(KC_F), _______,
+ _______, _______, KC_X, _______, _______, _______, _______, FUN0 , KC_COMM, KC_DOT, KC_COLN, _______
),
/* Func
* ,-----------------------------------------------------------------------------------.
- * | | F1 | F2 | F3 | F4 | | | PgUp | Up | PgDn | PgUp | Del |
+ * | | F1 | F2 | F3 | F4 | Ins | | PgUp | Up | PgDn | PgUp | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
- * | | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | Ins |
+ * | Caps | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
- * | | F9 | F10 | F11 | F12 | | | | Home | End | | |
+ * | | F9 | F10 | F11 | F12 |Pause | | | Home | End | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_FUN] = KEYMAP(
- XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL,
- XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8, KC_PSCR, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_INS,
- _______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______,
+ XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_INS, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL,
+ KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, KC_PSCR, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,
+ _______, KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
@@ -933,7 +935,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
#endif
// handle greek layer shift
- // handle both shift = capslock
case KC_LSFT:
case KC_RSFT:
;
@@ -947,13 +948,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
layer_off(_GREEKU);
}
}
- } else {
- if (record->event.pressed) {
- if (lshift ^ rshift) { // if only one shift was pressed
- register_code(KC_CAPS);
- unregister_code(KC_CAPS);
- }
- }
}
return true;
break;
@@ -1044,6 +1038,19 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
break;
#endif
+ // only process Fnumber on key release, and only when layer switcher is still pressed.
+ // this is to avoid accidental presses on potentially destructive keys
+ case KC_F1 ... KC_F12:
+ case KC_PAUS:
+ case KC_PSCR:
+ case KC_INS:
+ if (!record->event.pressed && layer == _FUN) { // key released and still in FUN layer
+ register_code(keycode);
+ unregister_code(keycode);
+ }
+ return false;
+ break;
+
// layer switcher
//
case GREEK: