summaryrefslogtreecommitdiff
path: root/keyboards/handwired/tractyl_manuform
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/tractyl_manuform')
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h26
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c2
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h24
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md5
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c6
-rw-r--r--keyboards/handwired/tractyl_manuform/readme.md164
6 files changed, 58 insertions, 169 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
index 7fb97cd2a4..b2a240f9ff 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
@@ -31,22 +31,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION COL2ROW
-#define USB_VBUS_PIN B10
+// #define USB_VBUS_PIN B10 // doesn't seem to work for me on one of my controllers... */
#define SPLIT_HAND_PIN C14 // high = left, low = right
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN A1
-#define WS2812_PWM_DRIVER PWMD5 // default: PWMD2
+#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
#define WS2812_PWM_CHANNEL 2 // default: 2
-#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
-#define WS2812_DMA_STREAM STM32_DMA1_STREAM0 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#define WS2812_DMA_CHANNEL 6 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define RGBLED_NUM 20
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT \
{ 10, 10 }
+#define RGBLIGHT_LIMIT_VAL 80
#define DEBUG_LED_PIN C13
@@ -68,13 +69,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* i2c config for oleds */
#define I2C_DRIVER I2CD1
-#define I2C1_SCL_BANK GPIOB
-#define I2C1_SDA_BANK GPIOB
-#define I2C1_SCL 8
-#define I2C1_SDA 9
+#define I2C1_SCL_PIN B8
+#define I2C1_SDA_PIN B9
#define I2C1_SCL_PAL_MODE 4
#define I2C1_SDA_PAL_MODE 4
-#define I2C1_CLOCK_SPEED 400000
+// #define I2C1_CLOCK_SPEED 400000
+/* For Legacy Compatibility: */
+#define I2C1_SCL 8
+#define I2C1_SDA 9
/* encoder config */
#define ENCODERS_PAD_A \
@@ -93,7 +95,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* eeprom config */
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
-#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8
+#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
// #define EXTERNAL_EEPROM_BYTE_COUNT 8196
// #define EXTERNAL_EEPROM_PAGE_SIZE 32
// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2
@@ -102,4 +104,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* pmw3360 config */
#define PMW3360_CS_PIN B0
#define PMW3360_SPI_MODE 3
-#define PMW3360_SPI_DIVISOR 4
+#define PMW3360_SPI_DIVISOR 64
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c
index 394c597b84..700b0685f2 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c
@@ -24,8 +24,10 @@ void matrix_scan_sub_kb(void) {
}
}
+#ifdef USB_VBUS_PIN
bool usb_vbus_state(void) {
setPinInputLow(USB_VBUS_PIN);
wait_us(5);
return readPin(USB_VBUS_PIN);
}
+#endif
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h
index 053f0aa517..d868eae48e 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h
@@ -21,17 +21,35 @@
#undef STM32_I2C_USE_I2C1
#define STM32_I2C_USE_I2C1 TRUE
-#undef STM32_PWM_USE_TIM5
-#define STM32_PWM_USE_TIM5 TRUE
+#undef STM32_I2C_I2C1_RX_DMA_STREAM
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#undef STM32_I2C_I2C1_TX_DMA_STREAM
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
#undef STM32_PWM_USE_TIM3
#define STM32_PWM_USE_TIM3 TRUE
#undef STM32_SPI_USE_SPI1
-#define STM32_SPI_USE_SPI1 TRUE
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_SPI_SPI1_RX_DMA_STREAM
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#undef STM32_SPI_SPI1_TX_DMA_STREAM
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
#undef STM32_SERIAL_USE_USART2
#define STM32_SERIAL_USE_USART2 TRUE
+#undef STM32_UART_USART2_RX_DMA_STREAM
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#undef STM32_UART_USART2_TX_DMA_STREAM
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+
#undef STM32_GPT_USE_TIM4
#define STM32_GPT_USE_TIM4 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
index 4571e18045..6377613814 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
@@ -4,11 +4,12 @@
* Split Hand Pin, using PC14
* Full Duplex Serial/USART using PA3 and PA4 on USART2
* PWM Audio using PB1 and TIM3 and GPT on TIM4
-* PWM RGB using PA1 TIM5
+* PWM RGB using PA1 TIM2
* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin
* 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
-* Encoder using PA10 and PA12
+* Encoder using PA13 and PA14
* SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
+* Pull-up resistor (22k) on A10 to fix reset issue.
* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c
index 67842c26d0..f209206337 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c
@@ -117,8 +117,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_ADJUST] = LAYOUT_5x6_right_wrapper(
KC_MAKE, ___________________BLANK___________________, _________________ADJUST_R1_________________, KC_RST,
VRSN, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EEP_RST,
- UC_MOD, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS,
- _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
+ _______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS,
+ UC_MOD, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
HPT_DWLI, HPT_DWLD, TG_GAME, TG_DBLO,
HPT_TOG, HPT_BUZ, KC_NUKE,
_______, _______, _______,
@@ -350,7 +350,7 @@ void render_kitty(void) {
// assumes 1 frame prep stage
extern bool swap_hands;
void animation_phase(void) {
- if (swap_hands) {
+ if (tap_toggling) {
anim_frame_duration = 300;
current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES;
oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE);
diff --git a/keyboards/handwired/tractyl_manuform/readme.md b/keyboards/handwired/tractyl_manuform/readme.md
index 3221da0e9d..e78fd2ee06 100644
--- a/keyboards/handwired/tractyl_manuform/readme.md
+++ b/keyboards/handwired/tractyl_manuform/readme.md
@@ -1,159 +1,25 @@
-Dactyl Manuform (4x5, 5x6, 5x7, 6x6)
-======
-the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
-![Imgur](https://i.imgur.com/7y0Vbyd.jpg)
-
-
-## First Time Setup
-
-Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
-
-Depending on your Layout chose one of the follwing commands:
-
-```
-$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME
-```
-
-example:
-```
-$ make handwired/dactyl_manuform/4x5:default
-```
-
-If everything worked correctly you will see a file:
-
-```
-dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex
-```
-
-For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
-
-
-## Keymaps
-
-### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/)
-
-#### Default
-Simple QWERTY layout with 3 Layers.
-#### Dvorak
-
-### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/)
-
-#### Default
-Just a copy of the Impstyle keymap. Feel free to adjust it.
-
-#### Impstyle
-A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master.
-
-### [Keymaps 5x7 aka almost Ergodox](/keyboards/handwired/dactyl_manuform/5x7/keymaps/)
-#### Default
-Keymap of Loligagger from geekhack.
-
-### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/)
-
-#### Default
-Simple QWERTY layout with 3 Layers.
-
-## Required Hardware
-
-Apart from diodes and key switches for the keyboard matrix in each half, you
-will need:
-
-* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
-* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
-
-Alternatively, you can use any sort of cable and socket that has at least 3
-wires. If you want to use I2C to communicate between halves, you will need a
-cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
-
-## Optional Hardware
-A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
+# Tractyl Manuform (4x6, 5x6)
-## Wiring
-
-The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
-PD0 on the ATmega32u4) between the two Pro Micros.
-
-Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
-and modify the `matrix.c` accordingly.
-
-The wiring for serial:
-
-![serial wiring](https://i.imgur.com/C3D1GAQ.png)
-
-The wiring for i2c:
-
-![i2c wiring](https://i.imgur.com/Hbzhc6E.png)
-
-The pull-up resistors may be placed on either half. It is also possible
-to use 4 resistors and have the pull-ups in both halves, but this is
-unnecessary in simple use cases.
-
-You can change your configuration between serial and i2c by modifying your `config.h` file.
-
-## Notes on Software Configuration
-
-the keymaps in here are for the 4x5 layout of the keyboard only.
-
-## Flashing
-
-To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing)
-
-
-## Choosing which board to plug the USB cable into (choosing Master)
-
-Because the two boards are identical, the firmware has logic to differentiate the left and right board.
-
-It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
-
-The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
-
-The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
-
-### Setting the left hand as master
-
-If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
-
-### Setting the right hand as master
-
-If you always plug the usb cable into the right board, add an extra flag to your `config.h`
-```
- #define MASTER_RIGHT
-```
-
-### Setting EE_hands to use either hands as master
+the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
+![Imgur](https://i.imgur.com/kDNVTI4l.jpeg)
-If you define `EE_HANDS` in your `config.h`, you will need to set the
-EEPROM for the left and right halves.
+* Keyboard Maintainer: [drashna](https://github.com/drashna)
+* Hardware Supported: Teensy 2.0++, WeAct BlackPill F411
-The EEPROM is used to store whether the
-half is left handed or right handed. This makes it so that the same firmware
-file will run on both hands instead of having to flash left and right handed
-versions of the firmware to each half. To flash the EEPROM file for the left
-half run:
-```
-make handwired/dactyl_promicro:default:dfu-split-left
-make handwired/dactyl_promicro:default:dfu-split-right
-```
+Make example for this keyboard (after setting up your build environment):
-After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
+ make handwired/tractyl_manuform/5x6_right/f411/drashna:default
-Note that you need to program both halves, but you have the option of using
-different keymaps for each half. You could program the left half with a QWERTY
-layout and the right half with a Colemak layout using bootmagic's default layout option.
-Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
-right half is connected.
+Flashing example for this keyboard:
+ make handwired/tractyl_manuform/5x6_right/f411/drashna:default:flash
-Notes on Using Pro Micro 3.3V
------------------------------
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
-the frequency on the 3.3V board.
+## Bootloader
-Also, if the slave board is producing weird characters in certain columns,
-update the following line in `matrix.c` to the following:
+Enter the bootloader in 3 ways:
-```
-// wait_us(30); // without this wait read unstable value.
-wait_us(300); // without this wait read unstable value.
-```
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available