diff options
Diffstat (limited to 'keyboards/handwired/mechboards_micropad')
8 files changed, 0 insertions, 516 deletions
diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h deleted file mode 100644 index 01a0bdd909..0000000000 --- a/keyboards/handwired/mechboards_micropad/config.h +++ /dev/null @@ -1,245 +0,0 @@ -/* -Copyright 2019 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x8968 -#define PRODUCT_ID 0x0001 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Yiancar -#define PRODUCT Mechboards Micropad -#define DESCRIPTION Enjoy your freebie! - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B6 } -#define MATRIX_COL_PINS { B2, B3, B1, F7 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/mechboards_micropad/info.json b/keyboards/handwired/mechboards_micropad/info.json deleted file mode 100644 index f8908d9fcf..0000000000 --- a/keyboards/handwired/mechboards_micropad/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Mechboards Micropad", - "url": "", - "maintainer": "yiancar", - "width": 4, - "height": 1, - "layouts": { - "LAYOUT": { - "layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":1, "y":0}, {"label":"3", "x":2, "y":0}, {"label":"4", "x":3, "y":0}] - } - } -}
\ No newline at end of file diff --git a/keyboards/handwired/mechboards_micropad/keymaps/default/keymap.c b/keyboards/handwired/mechboards_micropad/keymaps/default/keymap.c deleted file mode 100644 index 41784c5204..0000000000 --- a/keyboards/handwired/mechboards_micropad/keymaps/default/keymap.c +++ /dev/null @@ -1,84 +0,0 @@ -/* Copyright 2019 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include QMK_KEYBOARD_H - -uint8_t led_state = 1; - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - MECHBOARDURL = SAFE_RANGE, - QMKURL, - MKUK, - LEDCHANGE -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( /* Base */ - MECHBOARDURL, QMKURL, MKUK, LEDCHANGE \ - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case MECHBOARDURL: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("https://mechboards.co.uk/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - case MKUK: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("MKUK4 was amazing!"); - } else { - // when keycode QMKURL is released - } - break; - case LEDCHANGE: - if (record->event.pressed) { - // when keycode QMKURL is pressed - led_state = !led_state; - writePin(F6, led_state); - } else { - // when keycode QMKURL is released - } - break; - } - return true; -} - -void matrix_init_user(void) { - setPinOutput(F6); - writePinLow(F6); -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/handwired/mechboards_micropad/keymaps/default/readme.md b/keyboards/handwired/mechboards_micropad/keymaps/default/readme.md deleted file mode 100644 index 92d37ad8b9..0000000000 --- a/keyboards/handwired/mechboards_micropad/keymaps/default/readme.md +++ /dev/null @@ -1,4 +0,0 @@ -# The default keymap for mechboards_micropad - -This is a 4 key micropad freebie from Mechboards and Yiancar-Designs. -Press the keys to find out the secrets:)
\ No newline at end of file diff --git a/keyboards/handwired/mechboards_micropad/mechboards_micropad.c b/keyboards/handwired/mechboards_micropad/mechboards_micropad.c deleted file mode 100644 index d4c8fa9b92..0000000000 --- a/keyboards/handwired/mechboards_micropad/mechboards_micropad.c +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2019 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "mechboards_micropad.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/handwired/mechboards_micropad/mechboards_micropad.h b/keyboards/handwired/mechboards_micropad/mechboards_micropad.h deleted file mode 100644 index 9839084862..0000000000 --- a/keyboards/handwired/mechboards_micropad/mechboards_micropad.h +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright 2019 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - k00, k01, k02, k03 \ -) \ -{ \ - { k00, k01, k02, k03 } \ -} diff --git a/keyboards/handwired/mechboards_micropad/readme.md b/keyboards/handwired/mechboards_micropad/readme.md deleted file mode 100644 index 36230b1281..0000000000 --- a/keyboards/handwired/mechboards_micropad/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -Mechboards Micropad -=================== - -This was a freebie, use me and find out more about me :) - -Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar) -Hardware Supported: ATMega32u4 -Hardware Availability: Random mechboards.co.uk order and UK meetups! - -Make example for this keyboard (after setting up your build environment): - - make handwired/mechboards_micropad:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/mechboards_micropad/rules.mk b/keyboards/handwired/mechboards_micropad/rules.mk deleted file mode 100644 index 8ac2297e46..0000000000 --- a/keyboards/handwired/mechboards_micropad/rules.mk +++ /dev/null @@ -1,81 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = caterina - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) |