diff options
Diffstat (limited to 'keyboards/handwired/maartenwut')
| -rwxr-xr-x | keyboards/handwired/maartenwut/config.h | 45 | ||||
| -rwxr-xr-x | keyboards/handwired/maartenwut/keymaps/default/keymap.c | 46 | ||||
| -rwxr-xr-x | keyboards/handwired/maartenwut/maartenwut.c | 13 | ||||
| -rwxr-xr-x | keyboards/handwired/maartenwut/maartenwut.h | 23 | ||||
| -rwxr-xr-x | keyboards/handwired/maartenwut/rules.mk | 67 |
5 files changed, 194 insertions, 0 deletions
diff --git a/keyboards/handwired/maartenwut/config.h b/keyboards/handwired/maartenwut/config.h new file mode 100755 index 0000000000..066f138560 --- /dev/null +++ b/keyboards/handwired/maartenwut/config.h @@ -0,0 +1,45 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xBB80 +#define PRODUCT_ID 0x050D +#define DEVICE_VER 0x0001 +#define MANUFACTURER Maartenwut +#define PRODUCT Ortho +#define DESCRIPTION Handwired ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D4, D0, D1, D2, D3 } +#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F0, F1, F4, F5, F6, F7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define QMK_ESC_OUTPUT C6 // usually COL +#define QMK_ESC_INPUT D0 // usually ROW + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/maartenwut/keymaps/default/keymap.c b/keyboards/handwired/maartenwut/keymaps/default/keymap.c new file mode 100755 index 0000000000..1c9eff9d81 --- /dev/null +++ b/keyboards/handwired/maartenwut/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +#include "maartenwut.h" + +#define _MA 0 +#define _NU 1 +#define _FL 2 +#define _GA 3 +#define _AR 4 + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#define LSHIFT OSM(MOD_LSFT) +#define SPACE LT(_AR, KC_SPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = KEYMAP( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DEL, KC_ENT, + LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PSCR, + KC_LCTL, KC_LGUI, KC_LALT, MO(_NU), SPACE, KC_SPC, MO(_FL), KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT), +[_NU] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_CAPS, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_0, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[_FL] = KEYMAP( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, TG(_GA), _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[_GA] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, _______), +[_AR] = KEYMAP( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +};
\ No newline at end of file diff --git a/keyboards/handwired/maartenwut/maartenwut.c b/keyboards/handwired/maartenwut/maartenwut.c new file mode 100755 index 0000000000..6a7c5cee62 --- /dev/null +++ b/keyboards/handwired/maartenwut/maartenwut.c @@ -0,0 +1,13 @@ +#include "maartenwut.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +};
\ No newline at end of file diff --git a/keyboards/handwired/maartenwut/maartenwut.h b/keyboards/handwired/maartenwut/maartenwut.h new file mode 100755 index 0000000000..0e47d63861 --- /dev/null +++ b/keyboards/handwired/maartenwut/maartenwut.h @@ -0,0 +1,23 @@ +#ifndef MAARTENWUT_H +#define MAARTENWUT_H + +#include "quantum.h" + +#define XXX KC_NO + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k43, k45, k47, k49, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, k43, XXX, k45, XXX, k47, XXX, k49, k4a, k4b, k4c, k4d} \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/maartenwut/rules.mk b/keyboards/handwired/maartenwut/rules.mk new file mode 100755 index 0000000000..7ed63c65ec --- /dev/null +++ b/keyboards/handwired/maartenwut/rules.mk @@ -0,0 +1,67 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 |