summaryrefslogtreecommitdiff
path: root/keyboards/handwired/dactyl_manuform/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/dactyl_manuform/readme.md')
-rw-r--r--keyboards/handwired/dactyl_manuform/readme.md32
1 files changed, 17 insertions, 15 deletions
diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md
index 3f72bd6b21..00288a8768 100644
--- a/keyboards/handwired/dactyl_manuform/readme.md
+++ b/keyboards/handwired/dactyl_manuform/readme.md
@@ -1,11 +1,11 @@
-Dactyl Manuform (4x5, 5x6, 6x6)
+Dactyl Manuform (4x5, 5x6, 5x7, 6x6)
======
the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
![Imgur](https://i.imgur.com/7y0Vbyd.jpg)
## First Time Setup
------------------
+
Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
Depending on your Layout chose one of the follwing commands:
@@ -29,7 +29,7 @@ For more information on customizing keymaps, take a look at the primary document
## Keymaps
------------------
+
### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/)
#### Default
@@ -44,13 +44,16 @@ Just a copy of the Impstyle keymap. Feel free to adjust it.
#### Impstyle
A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master.
+### [Keymaps 5x7 aka almost Ergodox](/keyboards/handwired/dactyl_manuform/5x7/keymaps/)
+#### Default
+Keymap of Loligagger from geekhack.
+
### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/)
#### Default
Simple QWERTY layout with 3 Layers.
-##Required Hardware
------------------
+## Required Hardware
Apart from diodes and key switches for the keyboard matrix in each half, you
will need:
@@ -62,12 +65,10 @@ Alternatively, you can use any sort of cable and socket that has at least 3
wires. If you want to use I2C to communicate between halves, you will need a
cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
-##Optional Hardware
------------------
+## Optional Hardware
A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
-##Wiring
-------
+## Wiring
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
PD0 on the ATmega32u4) between the two Pro Micros.
@@ -89,19 +90,17 @@ unnecessary in simple use cases.
You can change your configuration between serial and i2c by modifying your `config.h` file.
-##Notes on Software Configuration
--------------------------------
+## Notes on Software Configuration
the keymaps in here are for the 4x5 layout of the keyboard only.
-##Flashing
--------
+## Flashing
To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing)
-##Choosing which board to plug the USB cable into (choosing Master)
---------
+## Choosing which board to plug the USB cable into (choosing Master)
+
Because the two boards are identical, the firmware has logic to differentiate the left and right board.
It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
@@ -111,15 +110,18 @@ The EEPROM approach requires additional setup (flashing the eeprom) but allows y
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
### Setting the left hand as master
+
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
### Setting the right hand as master
+
If you always plug the usb cable into the right board, add an extra flag to your `config.h`
```
#define MASTER_RIGHT
```
### Setting EE_hands to use either hands as master
+
If you define `EE_HANDS` in your `config.h`, you will need to set the
EEPROM for the left and right halves.