diff options
Diffstat (limited to 'keyboards/handwired/cans12er')
| -rw-r--r-- | keyboards/handwired/cans12er/README.md | 18 | ||||
| -rw-r--r-- | keyboards/handwired/cans12er/cans12er.c | 1 | ||||
| -rw-r--r-- | keyboards/handwired/cans12er/cans12er.h | 13 | ||||
| -rw-r--r-- | keyboards/handwired/cans12er/config.h | 38 | ||||
| -rw-r--r-- | keyboards/handwired/cans12er/keymaps/default/keymap.c | 20 | ||||
| -rw-r--r-- | keyboards/handwired/cans12er/rules.mk | 32 |
6 files changed, 122 insertions, 0 deletions
diff --git a/keyboards/handwired/cans12er/README.md b/keyboards/handwired/cans12er/README.md new file mode 100644 index 0000000000..5ecb2d2c26 --- /dev/null +++ b/keyboards/handwired/cans12er/README.md @@ -0,0 +1,18 @@ +# Cans12er + + +A 12-key, orthogonal keypad designed by Can! + +* Keyboard Maintainer: [Can](https://github.com/canbaytok) +* Hardware Supported: Pro Micro Atmega32u4 +* Hardware Availability: DIY with the [open-source design files](https://github.com/canbaytok/Cans12er) + +Schematic can be found here: [EasyEDA](https://easyeda.com/senordoenermann/mediapad) + +Build Instructions can be found here: [canbaytok/Cans12er](https://github.com/canbaytok/Cans12er) + +Make example for this keyboard (after setting up your build environment): + + make handwired/cans12er:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/cans12er/cans12er.c b/keyboards/handwired/cans12er/cans12er.c new file mode 100644 index 0000000000..e74b6a3026 --- /dev/null +++ b/keyboards/handwired/cans12er/cans12er.c @@ -0,0 +1 @@ +#include "cans12er.h" diff --git a/keyboards/handwired/cans12er/cans12er.h b/keyboards/handwired/cans12er/cans12er.h new file mode 100644 index 0000000000..87a39799ef --- /dev/null +++ b/keyboards/handwired/cans12er/cans12er.h @@ -0,0 +1,13 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_3x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 } \ +} diff --git a/keyboards/handwired/cans12er/config.h b/keyboards/handwired/cans12er/config.h new file mode 100644 index 0000000000..d7bc4c5c5a --- /dev/null +++ b/keyboards/handwired/cans12er/config.h @@ -0,0 +1,38 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Can +#define PRODUCT cans12er +#define DESCRIPTION a simple 3x4 keypad. every part can be manufactured at home + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F7, B1, B3 } +#define MATRIX_COL_PINS { D0, D4, C6, D7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 0 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/cans12er/keymaps/default/keymap.c b/keyboards/handwired/cans12er/keymaps/default/keymap.c new file mode 100644 index 0000000000..864abede37 --- /dev/null +++ b/keyboards/handwired/cans12er/keymaps/default/keymap.c @@ -0,0 +1,20 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _KEYPAD 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_KEYPAD] = LAYOUT_ortho_3x4( + KC_A, KC_B, KC_C, KC_D, + KC_E, KC_F, KC_G, KC_H, + KC_I, KC_J, KC_K, KC_L +), +}; diff --git a/keyboards/handwired/cans12er/rules.mk b/keyboards/handwired/cans12er/rules.mk new file mode 100644 index 0000000000..c6675b6153 --- /dev/null +++ b/keyboards/handwired/cans12er/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs
\ No newline at end of file |