diff options
Diffstat (limited to 'keyboards/handwired/arrow_pad')
| -rw-r--r-- | keyboards/handwired/arrow_pad/arrow_pad.c | 1 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/arrow_pad.h | 42 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/config.h | 103 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/info.json | 60 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/keymaps/default/keymap.c | 119 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/keymaps/pad_21/config.h | 152 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/keymaps/pad_21/keymap.c | 119 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk | 17 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/keymaps/pad_24/config.h | 154 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/keymaps/pad_24/keymap.c | 119 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk | 17 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/readme.md | 133 | ||||
| -rw-r--r-- | keyboards/handwired/arrow_pad/rules.mk | 20 |
13 files changed, 0 insertions, 1056 deletions
diff --git a/keyboards/handwired/arrow_pad/arrow_pad.c b/keyboards/handwired/arrow_pad/arrow_pad.c deleted file mode 100644 index 381934aa88..0000000000 --- a/keyboards/handwired/arrow_pad/arrow_pad.c +++ /dev/null @@ -1 +0,0 @@ -#include "arrow_pad.h"
\ No newline at end of file diff --git a/keyboards/handwired/arrow_pad/arrow_pad.h b/keyboards/handwired/arrow_pad/arrow_pad.h deleted file mode 100644 index 2d677beb5c..0000000000 --- a/keyboards/handwired/arrow_pad/arrow_pad.h +++ /dev/null @@ -1,42 +0,0 @@ -#pragma once - -#include "quantum.h" -#include "matrix.h" -#include "keymap.h" -#ifdef BACKLIGHT_ENABLE - #include "backlight.h" -#endif -#include <avr/io.h> -#include <stddef.h> - -#define XXX KC_NO - -// This is the 21-key keypad to 4x6 element matrix mapping -#define LAYOUT( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, k23, \ - k30, k31, k32, k33, \ - k40, k41, k42, k43, \ - k50, k51, k52, k53 \ -) { \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, k23 }, \ - { k30, k31, k32, k33 }, \ - { k40, k41, k42, k43 }, \ - { k50, k51, k52, k53 } \ -} - -// This is the 21-key keypad to 2x11 element matrix mapping -#define LAYOUT_pad21( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k04, k05, k06, \ - k14, k15, k16, k07, \ - k08, k09, k0A, \ - k19, k1A, k17 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, XXX, k19, k1A } \ -} diff --git a/keyboards/handwired/arrow_pad/config.h b/keyboards/handwired/arrow_pad/config.h deleted file mode 100644 index dcbdef2fcc..0000000000 --- a/keyboards/handwired/arrow_pad/config.h +++ /dev/null @@ -1,103 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x4096 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Nobody -#define PRODUCT GoldPad - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } -#define MATRIX_COL_PINS { B0, B1, B2, B3 } -#define UNUSED_PINS - -#define BACKLIGHT_PIN B7 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/handwired/arrow_pad/info.json b/keyboards/handwired/arrow_pad/info.json deleted file mode 100644 index fc24898f06..0000000000 --- a/keyboards/handwired/arrow_pad/info.json +++ /dev/null @@ -1,60 +0,0 @@ -{ - "keyboard_name": "arrow_pad", - "url": "", - "maintainer": "qmk", - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"KM_ESC", "x":0, "y":0}, - {"label":"KM_TAB", "x":1, "y":0}, - {"label":"KM_BSL", "x":2, "y":0}, - {"label":"KM_ARR", "x":3, "y":0}, - {"label":"KM_NUM", "x":0, "y":1}, - {"label":"KM_FSL", "x":1, "y":1}, - {"label":"KM_AST", "x":2, "y":1}, - {"label":"KM_MIN", "x":3, "y":1}, - {"label":"KM___7", "x":0, "y":2}, - {"label":"KM___8", "x":1, "y":2}, - {"label":"KM___9", "x":2, "y":2}, - {"label":"KM_EQU", "x":3, "y":2}, - {"label":"KM___4", "x":0, "y":3}, - {"label":"KM___5", "x":1, "y":3}, - {"label":"KM___6", "x":2, "y":3}, - {"label":"KM_PLS", "x":3, "y":3}, - {"label":"KM___1", "x":0, "y":4}, - {"label":"KM___2", "x":1, "y":4}, - {"label":"KM___3", "x":2, "y":4}, - {"label":"___ENT", "x":3, "y":4}, - {"label":"KM___0", "x":0, "y":5}, - {"label":"_____0", "x":1, "y":5}, - {"label":"KM_DOT", "x":2, "y":5}, - {"label":"KM_ENT", "x":3, "y":5} - ] - }, - "LAYOUT_pad21": { - "layout": [ - {"label":"KM_ESC", "x":0, "y":0}, - {"label":"KM_TAB", "x":1, "y":0}, - {"label":"KM_BSL", "x":2, "y":0}, - {"label":"KM_ARR", "x":3, "y":0}, - {"label":"KM_NUM", "x":0, "y":1}, - {"label":"KM_FSL", "x":1, "y":1}, - {"label":"KM_AST", "x":2, "y":1}, - {"label":"KM_MIN", "x":3, "y":1}, - {"label":"KM___7", "x":0, "y":2}, - {"label":"KM___8", "x":1, "y":2}, - {"label":"KM___9", "x":2, "y":2}, - {"label":"KM___4", "x":0, "y":3}, - {"label":"KM___5", "x":1, "y":3}, - {"label":"KM___6", "x":2, "y":3}, - {"label":"KM_PLS", "x":3, "y":2, "h":2}, - {"label":"KM___1", "x":0, "y":4}, - {"label":"KM___2", "x":1, "y":4}, - {"label":"KM___3", "x":2, "y":4}, - {"label":"KM___0", "x":0, "y":5, "w":2}, - {"label":"KM_DOT", "x":2, "y":5}, - {"label":"KM_ENT", "x":3, "y":4, "h":2} - ] - } - } -} diff --git a/keyboards/handwired/arrow_pad/keymaps/default/keymap.c b/keyboards/handwired/arrow_pad/keymaps/default/keymap.c deleted file mode 100644 index dd729c59a1..0000000000 --- a/keyboards/handwired/arrow_pad/keymaps/default/keymap.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include QMK_KEYBOARD_H -#include "led.h" - -enum layers { - LAYER_BASE, - LAYER_EDIT, - LAYER_FUNCTION -}; - -enum custom_keycodes { - M_COPY = SAFE_RANGE, // KC_FN5: MACRO_COPY_CUT - M_SHFCT, // KC_FN6: MACRO_SHIFT_CONTROL - M_CTALT // KC_FN7: MACRO_CONTROL_ALT -}; - -#define SC_UNDO LCTL(KC_Z) -#define SC_REDO LCTL(KC_Y) -#define SC_CUT LCTL(KC_X) -#define SC_COPY LCTL(KC_C) -#define SC_PSTE LCTL(KC_V) -#define SC_SELA LCTL(KC_A) -#define SC_SAVE LCTL(KC_S) -#define SC_OPEN LCTL(KC_O) -#define SC_ACLS LALT(KC_F4) -#define SC_CCLS LCTL(KC_F4) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[LAYER_BASE] = LAYOUT( \ - KC_ESC, KC_TAB, KC_BSLS, MO(2), \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, KC_PEQL, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_P0, KC_PCMM, KC_PDOT, KC_PENT ), - -[LAYER_EDIT] = LAYOUT( \ - KC_ESC, KC_TAB, KC_SPC, _______, \ - TG(1), SC_PSTE, SC_REDO, SC_UNDO, \ - KC_HOME, KC_UP, KC_PGUP, KC_LALT, \ - KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \ - KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \ - KC_BSPC, KC_PENT, KC_DEL, M_SHFCT ), - -[LAYER_FUNCTION] = LAYOUT( \ - BL_TOGG, BL_INC, BL_DEC, _______, \ - TG(1), _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, XXXXXXX, \ - RESET, _______, _______, _______ ), - -}; - - -bool process_record_user(uint16_t keycode, keyrecord_t * record) { - // MACRODOWN only works in this function - switch (keycode) { - - case M_COPY: - if (record->event.pressed) { - register_code(KC_LCTL); - if (record->tap.count == 1) { - register_code(KC_C); - unregister_code(KC_C); - } else if (record->tap.count == 2) { - register_code(KC_X); - unregister_code(KC_X); - } - unregister_code(KC_LCTL); - } - break; - - case M_SHFCT: - if (record->event.pressed) { - if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); - if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count == 3) register_code(KC_PENT);; - } else { - unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); - unregister_code(KC_PENT); - } - break; - - case M_CTALT: - if (record->event.pressed) { - if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); - } else { - unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); - } - break; - } - - return true; -} - -void led_set_user(uint8_t usb_led) -{ - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output high - DDRD |= (1<<6); - PORTD |= (1<<6); - } else { - // Hi-Z - DDRD &= ~(1<<6); - PORTD &= ~(1<<6); - } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // output low - DDRC |= (1<<7); - PORTC |= ~(1<<7); - } else { - // Hi-Z - DDRC &= ~(1<<7); - PORTC &= ~(1<<7); - } -} diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h b/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h deleted file mode 100644 index 550bfd183f..0000000000 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h +++ /dev/null @@ -1,152 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x4097 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Nobody -#define PRODUCT Arrow Pad 21 - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 11 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D3, D5 } -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D4 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/keymap.c b/keyboards/handwired/arrow_pad/keymaps/pad_21/keymap.c deleted file mode 100644 index 1692976357..0000000000 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/keymap.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include QMK_KEYBOARD_H -#include "led.h" - -enum layers { - LAYER_BASE, - LAYER_EDIT, - LAYER_FUNCTION -}; - -enum custom_keycodes { - M_COPY = SAFE_RANGE, // KC_FN5: MACRO_COPY_CUT - M_SHFCT, // KC_FN6: MACRO_SHIFT_CONTROL - M_CTALT // KC_FN7: MACRO_CONTROL_ALT -}; - -#define SC_UNDO LCTL(KC_Z) -#define SC_REDO LCTL(KC_Y) -#define SC_CUT LCTL(KC_X) -#define SC_COPY LCTL(KC_C) -#define SC_PSTE LCTL(KC_V) -#define SC_SELA LCTL(KC_A) -#define SC_SAVE LCTL(KC_S) -#define SC_OPEN LCTL(KC_O) -#define SC_ACLS LALT(KC_F4) -#define SC_CCLS LCTL(KC_F4) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[LAYER_BASE] = LAYOUT_pad21( \ - KC_ESC, KC_TAB, KC_BSLS, MO(2), \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, \ - KC_P0, KC_PDOT, KC_PENT ), - -[LAYER_EDIT] = LAYOUT_pad21( \ - KC_ESC, KC_TAB, KC_SPC, _______, \ - TG(1), SC_PSTE, SC_REDO, SC_UNDO, \ - KC_HOME, KC_UP, KC_PGUP, \ - KC_LEFT, M_COPY, KC_RGHT, M_CTALT, \ - KC_END, KC_DOWN, KC_PGDN, \ - KC_BSPC, KC_DEL, M_SHFCT), - -[LAYER_FUNCTION] = LAYOUT_pad21( \ - BL_TOGG, BL_INC, BL_DEC, _______, \ - TG(1), _______, _______, _______, \ - _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, \ - RESET, _______, _______ ), - -}; - - -bool process_record_user(uint16_t keycode, keyrecord_t * record) { - // MACRODOWN only works in this function - switch (keycode) { - - case M_COPY: - if (record->event.pressed) { - register_code(KC_LCTL); - if (record->tap.count == 1) { - register_code(KC_C); - unregister_code(KC_C); - } else if (record->tap.count == 2) { - register_code(KC_X); - unregister_code(KC_X); - } - unregister_code(KC_LCTL); - } - break; - - case M_SHFCT: - if (record->event.pressed) { - if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); - if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count == 3) register_code(KC_PENT);; - } else { - unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); - unregister_code(KC_PENT); - } - break; - - case M_CTALT: - if (record->event.pressed) { - if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); - } else { - unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); - } - break; - } - - return true; -} - -void led_set_user(uint8_t usb_led) -{ - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output high - DDRD |= (1<<6); - PORTD |= (1<<6); - } else { - // Hi-Z - DDRD &= ~(1<<6); - PORTD &= ~(1<<6); - } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // output low - DDRC |= (1<<7); - PORTC |= ~(1<<7); - } else { - // Hi-Z - DDRC &= ~(1<<7); - PORTC &= ~(1<<7); - } -} diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk b/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk deleted file mode 100644 index 8cc765c7a5..0000000000 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h b/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h deleted file mode 100644 index 51d3b9080b..0000000000 --- a/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h +++ /dev/null @@ -1,154 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x4096 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Nobody -#define PRODUCT Arrow Pad 24 - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } -#define MATRIX_COL_PINS { B0, B1, B2, B3 } -#define UNUSED_PINS - -#define BACKLIGHT_PIN B7 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_24/keymap.c b/keyboards/handwired/arrow_pad/keymaps/pad_24/keymap.c deleted file mode 100644 index dd729c59a1..0000000000 --- a/keyboards/handwired/arrow_pad/keymaps/pad_24/keymap.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include QMK_KEYBOARD_H -#include "led.h" - -enum layers { - LAYER_BASE, - LAYER_EDIT, - LAYER_FUNCTION -}; - -enum custom_keycodes { - M_COPY = SAFE_RANGE, // KC_FN5: MACRO_COPY_CUT - M_SHFCT, // KC_FN6: MACRO_SHIFT_CONTROL - M_CTALT // KC_FN7: MACRO_CONTROL_ALT -}; - -#define SC_UNDO LCTL(KC_Z) -#define SC_REDO LCTL(KC_Y) -#define SC_CUT LCTL(KC_X) -#define SC_COPY LCTL(KC_C) -#define SC_PSTE LCTL(KC_V) -#define SC_SELA LCTL(KC_A) -#define SC_SAVE LCTL(KC_S) -#define SC_OPEN LCTL(KC_O) -#define SC_ACLS LALT(KC_F4) -#define SC_CCLS LCTL(KC_F4) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[LAYER_BASE] = LAYOUT( \ - KC_ESC, KC_TAB, KC_BSLS, MO(2), \ - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, KC_PEQL, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_P0, KC_PCMM, KC_PDOT, KC_PENT ), - -[LAYER_EDIT] = LAYOUT( \ - KC_ESC, KC_TAB, KC_SPC, _______, \ - TG(1), SC_PSTE, SC_REDO, SC_UNDO, \ - KC_HOME, KC_UP, KC_PGUP, KC_LALT, \ - KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \ - KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \ - KC_BSPC, KC_PENT, KC_DEL, M_SHFCT ), - -[LAYER_FUNCTION] = LAYOUT( \ - BL_TOGG, BL_INC, BL_DEC, _______, \ - TG(1), _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, XXXXXXX, \ - RESET, _______, _______, _______ ), - -}; - - -bool process_record_user(uint16_t keycode, keyrecord_t * record) { - // MACRODOWN only works in this function - switch (keycode) { - - case M_COPY: - if (record->event.pressed) { - register_code(KC_LCTL); - if (record->tap.count == 1) { - register_code(KC_C); - unregister_code(KC_C); - } else if (record->tap.count == 2) { - register_code(KC_X); - unregister_code(KC_X); - } - unregister_code(KC_LCTL); - } - break; - - case M_SHFCT: - if (record->event.pressed) { - if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT)); - if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count == 3) register_code(KC_PENT);; - } else { - unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL)); - unregister_code(KC_PENT); - } - break; - - case M_CTALT: - if (record->event.pressed) { - if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL)); - if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT)); - } else { - unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); - } - break; - } - - return true; -} - -void led_set_user(uint8_t usb_led) -{ - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output high - DDRD |= (1<<6); - PORTD |= (1<<6); - } else { - // Hi-Z - DDRD &= ~(1<<6); - PORTD &= ~(1<<6); - } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // output low - DDRC |= (1<<7); - PORTC |= ~(1<<7); - } else { - // Hi-Z - DDRC &= ~(1<<7); - PORTC &= ~(1<<7); - } -} diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk b/keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk deleted file mode 100644 index c849339dee..0000000000 --- a/keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file diff --git a/keyboards/handwired/arrow_pad/readme.md b/keyboards/handwired/arrow_pad/readme.md deleted file mode 100644 index 43a0e33c40..0000000000 --- a/keyboards/handwired/arrow_pad/readme.md +++ /dev/null @@ -1,133 +0,0 @@ -arrow_pad keyboard firmware -====================== - -## Keyboard Info - -The ArrowPad is a wired conversion that can be made to any stand-alone keypad. It uses two main layers - a standard numpad, and a more advanced arrow cluster navigator. - -The first 24-key ArrowPad was handwired, but the PCB was wired as listed below. - -``` -<Chip Ref Des> pin <Pin #> -<Keycap Name> (Silkscreen Name if different) - <Switch Pin #> - - -Note: -U2 pin 2 is the Num Lock LED and is active low. - -U2 pin 1 -Clear (Num Lock) - 1 -Enter - 2 -Esc (ESC) - 2 - - -U2 pin 3 -- - 1 - -U2 pin 4 -7 - 2 -8 - 2 -9 - 2 - -U2 pin 5 -* - 2 -Delete (BACK SPACE) - 2 - -U2 pin 6 -1 - 2 -0 - 2 -. - 2 -, - 2 - -U2 pin 7 -4 - 2 -5 - 2 -6 - 2 - -U2 pin 8 -Tab - 2 -= (/) - 2 - -U2 pin 13 -Delete (BACK SPACE) - 1 -9 - 1 -6 - 1 -3 - 1 -. - 1 - -U2 pin 14 -Tab - 1 -8 - 1 -5 - 1 -2 - 1 -0 - 1 - -U2 pin 15 -Esc (ESC) - 1 -= (/) - 1 -/ (*) - 1 -7 - 1 -4 - 1 -1 - 1 -+ - 1 - -U2 pin 16 -Enter - 1 -* (<--) - 1 -, - 1 - -U2 pin 17 -Fn (#NAME?) - 1 -- - 2 -Clear (Num Lock) - 2 - -U2 pin 18 -Fn (#NAME?) - 2 -* (<--) - 2 -+ - 2 -3 - 2 -2 - 2 -``` - -More info can be found on [GeekHack](https://geekhack.org/index.php?topic=73632.msg1802497#msg1802497) - -The second ArrowPad was a conversion from a 21-key Genovation keypad. It used a 2 row x 11 column matrix. - -``` -#define LAYOUT_pad21( \ - KM_ESC, KM_TAB, KM_BSL, KM_ARR, \ - KM_NUM, KM_FSL, KM_AST, KM_MIN, \ - KM___7, KM___8, KM___9, \ - KM___4, KM___5, KM___6, KM_PLS, \ - KM___1, KM___2, KM___3, \ - KM___0, KM_DOT, KM_ENT \ -) { \ - { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \ - { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO, KM___0, KM_DOT, }, \ -} -``` - - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme.md](/readme.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/arrow_pad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make handwired/arrow_pad:default`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make handwired/arrow_pad:[default|pad_21|pad_24|<name>] -``` - -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/handwired/arrow_pad/rules.mk b/keyboards/handwired/arrow_pad/rules.mk deleted file mode 100644 index 09b448f271..0000000000 --- a/keyboards/handwired/arrow_pad/rules.mk +++ /dev/null @@ -1,20 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output |