diff options
Diffstat (limited to 'keyboards/gh60')
29 files changed, 0 insertions, 2710 deletions
diff --git a/keyboards/gh60/config.h b/keyboards/gh60/config.h deleted file mode 100644 index a99dd4e59b..0000000000 --- a/keyboards/gh60/config.h +++ /dev/null @@ -1,156 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER geekhack -#define PRODUCT GH60 -#define DESCRIPTION t.m.k. keyboard firmware for GH60 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -// Rev A -// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } -// Rev B/C - #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/gh60/gh60.c b/keyboards/gh60/gh60.c deleted file mode 100644 index 441c799fa3..0000000000 --- a/keyboards/gh60/gh60.c +++ /dev/null @@ -1,39 +0,0 @@ -#include "gh60.h" - - -extern inline void gh60_caps_led_on(void); -extern inline void gh60_poker_leds_on(void); -extern inline void gh60_fn_led_on(void); -extern inline void gh60_esc_led_on(void); -extern inline void gh60_wasd_leds_on(void); - -extern inline void gh60_caps_led_off(void); -extern inline void gh60_poker_leds_off(void); -extern inline void gh60_fn_led_off(void); -extern inline void gh60_esc_led_off(void); -extern inline void gh60_wasd_leds_off(void); - - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - gh60_caps_led_on(); - } else { - gh60_caps_led_off(); - } - - // if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // gh60_esc_led_on(); - // } else { - // gh60_esc_led_off(); - // } - - // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { - // gh60_fn_led_on(); - // } else { - // gh60_fn_led_off(); - // } - - led_set_user(usb_led); -} diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h deleted file mode 100644 index c72fb23e50..0000000000 --- a/keyboards/gh60/gh60.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef GH60_H -#define GH60_H - -#include "quantum.h" -#include "led.h" - -/* GH60 LEDs - * GPIO pads - * 0 F7 WASD LEDs - * 1 F6 ESC LED - * 2 F5 FN LED - * 3 F4 POKER Arrow LEDs - * B2 Capslock LED - * B0 not connected - */ -inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } -inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); } -inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } -inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); } -inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } - -inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } -inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); } -inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } -inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); } -inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } - -/* GH60 keymap definition macro - * K2C, K31 and K3C are extra keys for ISO - */ -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ -} - -/* ANSI variant. No extra keys for ISO */ -#define LAYOUT_60_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \ -} - -/* ISO variant. Remove useless ANSI keys */ -#define LAYOUT_60_iso( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \ -} - - -/* HHKB Variant */ -#define LAYOUT_60_ansi_split_bs_rshift( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ -} - -/* ANSI with split Right Shift. No extra keys for ISO */ -#define LAYOUT_60_ansi_split_rshift( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \ -} - -#endif diff --git a/keyboards/gh60/info.json b/keyboards/gh60/info.json deleted file mode 100644 index b281e64340..0000000000 --- a/keyboards/gh60/info.json +++ /dev/null @@ -1,39 +0,0 @@ -{ - "keyboard_name": "GH60", - "url": "http://qmk.fm/keyboards/gh60", - "maintainer": "qmk", - "keyboard_folder": "gh60", - "processor": "atmega32u4", - "manufacturer": "geekhack", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "key_count": 65, - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Win", "x":11, "y":4}, {"label":"Menu", "x":12, "y":4}, {"label":"Ctrl", "x":13, "y":4}, {"x":14, "y":4}] - }, - - "LAYOUT_60_ansi": { - "key_count": 61, - "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}] - }, - - "LAYOUT_60_iso": { - "key_count": 62, - "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_60_ansi_split_bs_rshift": { - "key_count": 63, - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] - }, - - "LAYOUT_60_ansi_split_rshift": { - "key_count": 62, - "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":3, "y":0}, {"label":"K04", "x":4, "y":0}, {"label":"K05", "x":5, "y":0}, {"label":"K06", "x":6, "y":0}, {"label":"K07", "x":7, "y":0}, {"label":"K08", "x":8, "y":0}, {"label":"K09", "x":9, "y":0}, {"label":"K0A", "x":10, "y":0}, {"label":"K0B", "x":11, "y":0}, {"label":"K0C", "x":12, "y":0}, {"label":"K0D", "x":13, "y":0, "w":2}, {"label":"K10", "x":0, "y":1, "w":1.5}, {"label":"K11", "x":1.5, "y":1}, {"label":"K12", "x":2.5, "y":1}, {"label":"K13", "x":3.5, "y":1}, {"label":"K14", "x":4.5, "y":1}, {"label":"K15", "x":5.5, "y":1}, {"label":"K16", "x":6.5, "y":1}, {"label":"K17", "x":7.5, "y":1}, {"label":"K18", "x":8.5, "y":1}, {"label":"K19", "x":9.5, "y":1}, {"label":"K1A", "x":10.5, "y":1}, {"label":"K1B", "x":11.5, "y":1}, {"label":"K1C", "x":12.5, "y":1}, {"label":"K1D", "x":13.5, "y":1, "w":1.5}, {"label":"K20", "x":0, "y":2, "w":1.75}, {"label":"K21", "x":1.75, "y":2}, {"label":"K22", "x":2.75, "y":2}, {"label":"K23", "x":3.75, "y":2}, {"label":"K24", "x":4.75, "y":2}, {"label":"K25", "x":5.75, "y":2}, {"label":"K26", "x":6.75, "y":2}, {"label":"K27", "x":7.75, "y":2}, {"label":"K28", "x":8.75, "y":2}, {"label":"K29", "x":9.75, "y":2}, {"label":"K2A", "x":10.75, "y":2}, {"label":"K2B", "x":11.75, "y":2}, {"label":"K2D", "x":12.75, "y":2, "w":2.25}, {"label":"K30", "x":0, "y":3, "w":2.25}, {"label":"K32", "x":2.25, "y":3}, {"label":"K33", "x":3.25, "y":3}, {"label":"K34", "x":4.25, "y":3}, {"label":"K35", "x":5.25, "y":3}, {"label":"K36", "x":6.25, "y":3}, {"label":"K37", "x":7.25, "y":3}, {"label":"K38", "x":8.25, "y":3}, {"label":"K39", "x":9.25, "y":3}, {"label":"K3A", "x":10.25, "y":3}, {"label":"K3B", "x":11.25, "y":3}, {"label":"K3D", "x":12.25, "y":3, "w":1.75}, {"label":"K3C", "x":14, "y":3}, {"label":"K40", "x":0, "y":4, "w":1.25}, {"label":"K41", "x":1.25, "y":4, "w":1.25}, {"label":"K42", "x":2.5, "y":4, "w":1.25}, {"label":"K45", "x":3.75, "y":4, "w":6.25}, {"label":"K4A", "x":10, "y":4, "w":1.25}, {"label":"K4B", "x":11.25, "y":4, "w":1.25}, {"label":"K4C", "x":12.5, "y":4, "w":1.25}, {"label":"K4D", "x":13.75, "y":4, "w":1.25}] - } - } -} - - - diff --git a/keyboards/gh60/keymaps/bluezio/keymap.c b/keyboards/gh60/keymaps/bluezio/keymap.c deleted file mode 100644 index c0f650ecc5..0000000000 --- a/keyboards/gh60/keymaps/bluezio/keymap.c +++ /dev/null @@ -1,38 +0,0 @@ -#include QMK_KEYBOARD_H - -// lshift split, backspace split, full ANSI enter, full right shift -#define KEYMAP_BZIO( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ - ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ - } - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: HHKB with hyper key where ctrl used to be, and right half of left - shift used as a key lock */ - KEYMAP_BZIO( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,\ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,\ - KC_LSFT, KC_LOCK, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_HYPR, KC_LGUI, KC_LALT, LT(1, KC_SPC), KC_RALT, KC_RGUI, KC_APP, KC_RCTL), - - /* 1: spacefn with WASD arrows/navigation block and extra space key for - realignment of source code, plus IJKL mouse arrows, volume up/down in <>, - and caps lock where it used to be */ - KEYMAP_BZIO( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_PGUP, KC_UP, KC_PGDOWN, KC_INSERT, KC_MS_BTN2, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_DELETE, KC_MS_BTN1, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_HOME, KC_SPC, KC_END, KC_PSCREEN, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; diff --git a/keyboards/gh60/keymaps/bluezio/rules.mk b/keyboards/gh60/keymaps/bluezio/rules.mk deleted file mode 100644 index bfd26779c6..0000000000 --- a/keyboards/gh60/keymaps/bluezio/rules.mk +++ /dev/null @@ -1,69 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -KEY_LOCK_ENABLE = yes # KC_LOCK - -LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift diff --git a/keyboards/gh60/keymaps/chaser/README.md b/keyboards/gh60/keymaps/chaser/README.md deleted file mode 100644 index e6ec9e82be..0000000000 --- a/keyboards/gh60/keymaps/chaser/README.md +++ /dev/null @@ -1,96 +0,0 @@ -# [dragonchasers](https://github.com/dragonchaser) GH60 layout - -Layout derived from the default GH60 keymap. - - - -## Layers - -### Base Layer -``` -,-----------------------------------------------------------. -|Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | -|-----------------------------------------------------------| -|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | -|-----------------------------------------------------------| -|FN | A| S| D| F| G| H| J| K| L| ;| '|Return | -|-----------------------------------------------------------| -|Shift | Z| X| C| V| B| N| M| ,| .| /| Up |FN | -|-----------------------------------------------------------| -|Ctrl|Gui |Alt | Space |Alt |Left |Down|Right| -`-----------------------------------------------------------' - -Note: right FN triggers function layer, - left FN(CAPS) is a one-shot button for the macro layer -``` - -### Function Layer -``` -,-----------------------------------------------------------. -|GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | -|-----------------------------------------------------------| -| MB3|MB2|MUP|MB1|MWU| | | |INS| |RST| | |Print| -|-----------------------------------------------------------| -| | ML|MDN|MR |MWD| | | | | | | | -|-----------------------------------------------------------| -|CAPS | | | | | | | | | | |PGUP| | -|-----------------------------------------------------------| -| | | | |Ctrl|HOME|PGD |END | -`-----------------------------------------------------------' -``` - -### Macro Layer -``` -,-----------------------------------------------------------. -|DEF| |DUE| | | | | | | | | |GAM| ARR| -|-----------------------------------------------------------| -| |MAG|CLO|DUT|RBS|TIG| | | |COU|PSH| | | | -|-----------------------------------------------------------| -| |ADD|STS|DFF|FTC|PLL| | |LOG| | | | -|-----------------------------------------------------------| -| | | |COM| |BRN| | | | |MUT|VOL+|PLPA| -|-----------------------------------------------------------| -| | | | |APP |PREV|VOL-|NEXT| -`-----------------------------------------------------------' - -Abbreviations: --------------- -DEF - return to default layer -DUE - enable git duet mode -GAM - backlight WASD -ARR - backlight arrows -- -MAG - git submodule sync --recursive \ - && git submodule update --init --recursive \ - && git submodule foreach --recursive "git co . \ - && git reset --hard && git clean -dffx" -CLO - git clone -DUT - git duet (when in duet mode) -RBS - git rebase -TIG - tig -COU - git checkout -PSH - git push -- -ADD - git add -STS - git status -DFF - git diff -FTC - git fetch -PLL - git pull -LOG - git log -- -COM - git commit (or git duet commit if in duet mode) -BRN - git branch -MUT - audio mute -VOL+ - increase volume -PLPA - play/pause -- -APP - application (windows menu key) -PREV - previous song -VOL- - decrease volume -NEXT - next song - -Note: git commands are SEND_STRING macros sent to the - currently focused window Make sure it is your terminal :) - ``` - -**NOTE:** an outdated version of this keymap is also present for the Satan keyboard, which is no longer maintained since I could not get my hands on a properly working PCB. diff --git a/keyboards/gh60/keymaps/chaser/keymap.c b/keyboards/gh60/keymaps/chaser/keymap.c deleted file mode 100644 index 29228eec2d..0000000000 --- a/keyboards/gh60/keymaps/chaser/keymap.c +++ /dev/null @@ -1,328 +0,0 @@ -#include QMK_KEYBOARD_H -#include <util/delay.h> - - -extern keymap_config_t keymap_config; - - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QW 0 -#define _FL 1 -#define _MC 2 - -bool git_duet = false; -bool backlight_arrows = false; -bool backlight_gaming = false; -enum custom_keycodes { - /* GIT related keycodes */ - G_ADD = SAFE_RANGE, G_BRN, G_COM, G_COU, G_CLO, - G_DFF, G_DUE, G_DUT, G_FTC, G_LOG, G_MAG, G_MRG, - G_MRT, G_PSH, G_PLL, G_RBS, G_STH, G_STS, G_TIG, - - /* Multi-media related keycodes */ - A_MUTE, A_NEXT, A_PLPA, A_PREV, A_VOUP, A_VDWN, - - /* System related shortcuts */ - F_BTN, M_WAPP, K_ARR, K_WASD, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* - * ,-----------------------------------------------------------. - * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | - * |-----------------------------------------------------------| - * |FN | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /| FN |Up | - * |-----------------------------------------------------------| - * |Ctrl|Gui |Alt | Space |Alt |Left |Down|Right| - * `-----------------------------------------------------------' - * - * Note: right FN triggers function layer, - * left FN is a one-shot button for the macro layer - */ - /* Layer 0: Qwerty */ - [_QW] = LAYOUT_60_ansi_split_rshift( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - OSL(_MC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, F_BTN, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT \ - ), - - /* - * ,-----------------------------------------------------------. - * |GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | - * |-----------------------------------------------------------| - * | MB3|MB2|MUP|MB1|MWU| | | |INS| |RST| | |Print| - * |-----------------------------------------------------------| - * | | ML|MDN|MR |MWD| | | | | | | | - * |-----------------------------------------------------------| - * |CAPS | | | | | | | | | | |PGUP| | - * |-----------------------------------------------------------| - * | | | | |Ctrl|HOME|PGD |END | - * `-----------------------------------------------------------' - */ - /* Layer 1: Functions */ - [_FL] = LAYOUT_60_ansi_split_rshift( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - KC_BTN3, KC_BTN2, KC_MS_U, KC_BTN1, KC_WH_U, _______, _______, _______, KC_INS, _______, RESET, _______, _______, KC_PSCR, \ - KC_CAPS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, _______, _______, _______, _______, _______, KC_TILD, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, \ - _______, _______, _______, _______, KC_RCTL, KC_HOME, KC_PGDN, KC_END \ - ), - - /* - * ,-----------------------------------------------------------. - * |DEF| |DUE| | | | | | | | | |GAM| ARR| - * |-----------------------------------------------------------| - * | |MAG|CLO|DUT|RBS|TIG|MRT| | |COU|PSH| | | | - * |-----------------------------------------------------------| - * | |ADD|STS|DFF|FTC|PLL|MRG| |STH|LOG| | | F_OFF| - * |-----------------------------------------------------------| - * | | | |COM| |BRN| | | | |MUT|VOL+|PLPA| - * |-----------------------------------------------------------| - * | | | | |APP |PREV|VOL-|NEXT| - * `-----------------------------------------------------------' - * - * Abbreviations: - * -------------- - * DEF - return to default layer - * DUE - enable git duet mode - * CLO - git clone - * DUT - git duet (when in duet mode) - * RBS - git rebase - * MAG - git submodule sync --recursive && git submodule update --init --recursive && git submodule foreach --recursive "git co . && git reset --hard && git clean -dffx" - * TIG - tig - * MRG - git merge - * MRT - git mergetool - * COU - git checkout - * PSH - git push - * ADD - git add - * STS - git status - * DFF - git diff - * FTC - git fetch - * PLL - git pull - * STH - git stash - * LOG - git log - * COM - git commit (or git duet commit if in duet mode) - * BRN - git branch - * APP - application (windows menu key) - * MUT - audio mute - * VOL+ - increase volume - * VOL- - decrease volume - * PLPA - play/pause - * PREV - previous song - * NEXT - next song - * ARR - backlight arrow keys - * GAM - backlight WASD - * - * Note: git commands are SEND_STRING macros sent to the - * currently focused window Make sure it is your terminal :) - */ - /* Layer 2: Macros (Git & Multimedia) */ - [_MC] = LAYOUT_60_ansi_split_rshift( \ - TO(_QW), XXXXXXX, G_DUE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, K_WASD, K_ARR, \ - XXXXXXX, G_MAG, G_CLO, G_DUT, G_RBS, G_TIG, G_MRT, XXXXXXX, XXXXXXX, G_COU, G_PSH, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, G_ADD, G_STS, G_DFF, G_FTC, G_PLL, G_MRG, XXXXXXX, G_STH, G_LOG, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, G_COM, XXXXXXX, G_BRN, XXXXXXX, XXXXXXX, XXXXXXX, A_MUTE, A_PLPA, A_VOUP, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_WAPP, A_PREV, A_VDWN, A_NEXT \ - ), - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch(keycode) { - /* - * Begin git layer - */ - case G_ADD: - SEND_STRING("git add "); - layer_off(_MC); - return false;break; - case G_BRN: - SEND_STRING("git branch\n"); - layer_off(_MC); - return false;break; - case G_CLO: - SEND_STRING("git clone "); - layer_off(_MC); - return false;break; - case G_COM: - if(git_duet) { - SEND_STRING("git duet-commit "); - } else { - SEND_STRING("git commit "); - } - layer_off(_MC); - return false;break; - case G_COU: - SEND_STRING("git checkout "); - layer_off(_MC); - return false;break; - case G_DFF: - SEND_STRING("git diff\n"); - layer_off(_MC); - return false;break; - case G_DUE: - git_duet = !git_duet; - if(git_duet) { - gh60_esc_led_on(); - } else { - gh60_esc_led_off(); - } - layer_off(_MC); - return false;break; - case G_DUT: - if(git_duet) { - SEND_STRING("git duet "); - } - layer_off(_MC); - return false; break; - case G_FTC: - SEND_STRING("git fetch "); - layer_off(_MC); - return false;break; - case G_LOG: - SEND_STRING("git log --graph\n"); - layer_off(_MC); - return false;break; - case G_MAG: - // This is some git-magic to resync recursive submodule structures inside git projects (thx to https://github.com/jimmykarily) - SEND_STRING("git submodule sync --recursive && git submodule update --init --recursive && git submodule foreach --recursive \" git co . && git reset --hard && git clean -dffx \" \n"); - layer_off(_MC); - return false; break; - case G_MRG: - SEND_STRING("git merge "); - layer_off(_MC); - return false;break; - case G_MRT: - SEND_STRING("git mergetool "); - layer_off(_MC); - return false;break; - case G_PLL: - SEND_STRING("git pull "); - layer_off(_MC); - return false;break; - case G_PSH: - SEND_STRING("git push "); - layer_off(_MC); - return false;break; - case G_RBS: - SEND_STRING("git rebase "); - layer_off(_MC); - return false;break; - case G_STH: - SEND_STRING("git stash "); - layer_off(_MC); - return false;break; - case G_STS: - SEND_STRING("git status\n"); - layer_off(_MC); - return false;break; - case G_TIG: - SEND_STRING("tig\n"); - layer_off(_MC); - return false;break; - /* - * End git layer - */ - - /* - * Begin multimedia keys - */ - case A_MUTE: - register_code(KC_AUDIO_MUTE); - unregister_code(KC_AUDIO_MUTE); - layer_off(_MC); - return false;break; - case A_PLPA: - register_code(KC_MEDIA_PLAY_PAUSE); - unregister_code(KC_MEDIA_PLAY_PAUSE); - layer_off(_MC); - return false;break; - case A_VOUP: - register_code(KC_AUDIO_VOL_UP); - return false;break; - case A_VDWN: - register_code(KC_AUDIO_VOL_DOWN); - return false;break; - case A_PREV: - register_code(KC_MEDIA_PREV_TRACK); - unregister_code(KC_MEDIA_PREV_TRACK); - layer_off(_MC); - return false;break; - case A_NEXT: - register_code(KC_MEDIA_NEXT_TRACK); - unregister_code(KC_MEDIA_NEXT_TRACK); - layer_off(_MC); - return false;break; - /* - * End multimedia keys - */ - - // Tap dance to get the app button mapped - case M_WAPP: - register_code(KC_APP); - unregister_code(KC_APP); - layer_off(_MC); - return false;break; - - /* - * Begin multimedia keys - */ - case K_ARR: - backlight_arrows = !backlight_arrows; - if(backlight_arrows) { - gh60_poker_leds_on(); - } else { - gh60_poker_leds_off(); - } - layer_off(_MC); - return false;break; - case K_WASD: - backlight_gaming = !backlight_gaming; - if(backlight_gaming) { - gh60_wasd_leds_on(); - } else { - gh60_wasd_leds_off(); - } - layer_off(_MC); - return false; break; - case F_BTN: - gh60_fn_led_on(); - layer_on(_FL); - return false;break; - } - /* - * End multimedia keys - */ - - } else { - switch(keycode) { - /* - * Oneshots that will switch back to the default layer on KEY_UP - */ - case A_VOUP: - unregister_code(KC_AUDIO_VOL_UP); - layer_off(_MC); - return false;break; - case A_VDWN: - unregister_code(KC_AUDIO_VOL_DOWN); - layer_off(_MC); - return false;break; - case F_BTN: - layer_off(_FL); - gh60_fn_led_off(); - return false;break; - } - } - return true; -}; diff --git a/keyboards/gh60/keymaps/dbroqua/config.h b/keyboards/gh60/keymaps/dbroqua/config.h deleted file mode 100644 index 380b8303f3..0000000000 --- a/keyboards/gh60/keymaps/dbroqua/config.h +++ /dev/null @@ -1,175 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER geekhack -#define PRODUCT GH60 -#define DESCRIPTION t.m.k. keyboard firmware for GH60 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * RGB Underglow - * These settings are for the F4 by default: - * - * - * #define ws2812_pin PF4 - * #define RGBLED_NUM 14 // Number of LEDs - * #define RGBLIGHT_HUE_STEP 10 - * #define RGBLIGHT_SAT_STEP 17 - * #define RGBLIGHT_VAL_STEP 17 - * - * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. - * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. - * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c -*/ - -#define RGB_DI_PIN F4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 11 // Number of LEDs -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/gh60/keymaps/dbroqua/keymap.c b/keyboards/gh60/keymaps/dbroqua/keymap.c deleted file mode 100644 index 2030355a76..0000000000 --- a/keyboards/gh60/keymaps/dbroqua/keymap.c +++ /dev/null @@ -1,196 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _DEFAULT 0 -#define _FN 1 -#define _WASD 2 -#define _SFX 3 - -//bool esc_led_on; - -enum planck_keycodes { - DEFAULT = SAFE_RANGE -}; - -// Fillers to make layering more clear -#define ______ KC_TRNS - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Qwerty gui/alt/space/alt/gui - * ,-----------------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | - * |-----------------------------------------------------------------------------------------+ - * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | - * |-----------------------------------------------------------------------------------------+ - * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | - * |-----------------------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | - * |-----------------------------------------------------------------------------------------+ - * |LGUI | LAlt | Space | RAlt |RGUI | - * `-----------------------------------------------------------------' - */ - [_DEFAULT] = LAYOUT_60_ansi_split_bs_rshift( /* Basic QWERTY */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \ - ______, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, ______, ______ \ - ), - -/* FN Layer - * ,-----------------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | - * |-----------------------------------------------------------------------------------------+ - * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | - * |-----------------------------------------------------------------------------------------+ - * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | - * |-----------------------------------------------------------------------------------------+ - * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | - * |-----------------------------------------------------------------------------------------+ - * | | | | Stop | | - * `-----------------------------------------------------------------' - */ - [_FN] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 1 */ - TG(_SFX),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ - KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ - ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \ - ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \ - ______, ______, ______, TG(_WASD), KC_MSTP, ______, ______, ______ \ - ), - -/* WASD Layer - * ,-----------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | Up | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | Left| Down|Right| | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | - * `-----------------------------------------------------------------' - */ - [_WASD] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 2 */ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, ______, KC_UP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, KC_LEFT, KC_DOWN,KC_RGHT,______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______, \ - ______, ______, ______, ______, ______, ______, ______, ______ \ - ), - -/* SFX Layer - * ,-----------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | BL- | BL+ | BL | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | RGBT| RGBM| | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | - * `-----------------------------------------------------------------' - */ - [_SFX] = LAYOUT_60_ansi_split_bs_rshift( - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, F(0), F(1), ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ - ______, F(2), F(3), F(4), F(5), F(6), F(7), ______, ______, ______, ______, ______, ______, \ - ______, ______, ______, ______, ______, ______, ______, ______ \ - ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; - -enum function_id { - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(RGBLED_TOGGLE), - [1] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL) -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { - case RGBLED_TOGGLE: - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - } -} - -void matrix_scan_user(void) { - uint32_t layer = layer_state; - - if (layer & (1<<1)) { - gh60_fn_led_on(); - } else { - gh60_fn_led_off(); - } - - if (layer & (1<<2)) { - gh60_wasd_leds_on(); - } else { - gh60_wasd_leds_off(); - } - - if (layer & (1<<3)) { - gh60_esc_led_on(); - } else { - gh60_esc_led_off(); - } -};
\ No newline at end of file diff --git a/keyboards/gh60/keymaps/dbroqua/rules.mk b/keyboards/gh60/keymaps/dbroqua/rules.mk deleted file mode 100644 index 5c6afa226f..0000000000 --- a/keyboards/gh60/keymaps/dbroqua/rules.mk +++ /dev/null @@ -1,108 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable RGB Underglow - diff --git a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c deleted file mode 100644 index 74ff97a931..0000000000 --- a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c +++ /dev/null @@ -1,87 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _DEFAULT 0 -#define _FN 1 - -int esc_led = 0; - -// Fillers to make layering more clear -#define ______ KC_TRNS - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Qwerty gui/alt/space/alt/gui - * ,-----------------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | - * |-----------------------------------------------------------------------------------------+ - * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | - * |-----------------------------------------------------------------------------------------+ - * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | - * |-----------------------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | - * |-----------------------------------------------------------------------------------------+ - * |LGUI | LAlt | Space | RAlt |RGUI | - * `-----------------------------------------------------------------' - */ - [_DEFAULT] = LAYOUT_60_ansi_split_bs_rshift( /* Basic QWERTY */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \ - ______, KC_LGUI, KC_LALT, KC_SPC, ______, KC_RALT, KC_RGUI, ______ \ - ), - -/* FN Layer - * ,-----------------------------------------------------------------------------------------. - * | Led | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | - * |-----------------------------------------------------------------------------------------+ - * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | - * |-----------------------------------------------------------------------------------------+ - * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | - * |-----------------------------------------------------------------------------------------+ - * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | - * |-----------------------------------------------------------------------------------------+ - * | | | | Stop | | - * `-----------------------------------------------------------------' - */ - [_FN] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 1 */ - F(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ - KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ - ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \ - ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \ - ______, ______, ______, ______, ______, KC_MSTP, ______, ______ \ - ) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; - -enum function_id { - LED_TOGGLE -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(LED_TOGGLE) -}; - -void esc_led_toggle(void) { - if (esc_led == 0){ - esc_led = 1; - gh60_esc_led_on(); - } else { - esc_led = 0; - gh60_esc_led_off(); - } -} - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { - case LED_TOGGLE: - if (record->event.pressed) { - esc_led_toggle(); - } - break; - } -}
\ No newline at end of file diff --git a/keyboards/gh60/keymaps/dbroqua_7U/rules.mk b/keyboards/gh60/keymaps/dbroqua_7U/rules.mk deleted file mode 100644 index e4269566d2..0000000000 --- a/keyboards/gh60/keymaps/dbroqua_7U/rules.mk +++ /dev/null @@ -1,108 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable RGB Underglow - diff --git a/keyboards/gh60/keymaps/default/keymap.c b/keyboards/gh60/keymaps/default/keymap.c deleted file mode 100644 index 581ba7e641..0000000000 --- a/keyboards/gh60/keymaps/default/keymap.c +++ /dev/null @@ -1,69 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* 0: qwerty */ - LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, - KC_LSFT, TG(2), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSLS, KC_RALT, KC_RGUI, KC_APP, KC_RCTL - ), - /* 1: fn */ - LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, - _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - /* 2: arrows */ - LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, - _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT - ), - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -void matrix_scan_user(void) { - -//Layer LED indicators - uint32_t layer = layer_state; - - if (layer & (1<<1)) { - gh60_wasd_leds_on(); - gh60_fn_led_on(); - } else { - gh60_wasd_leds_off(); - gh60_fn_led_off(); - } - - if (layer & (1<<2)) { - gh60_poker_leds_on(); - gh60_esc_led_on(); - } else { - gh60_poker_leds_off(); - gh60_esc_led_off(); - } - -}; diff --git a/keyboards/gh60/keymaps/emiilsd/keymap.c b/keyboards/gh60/keymaps/emiilsd/keymap.c deleted file mode 100644 index a863511d60..0000000000 --- a/keyboards/gh60/keymaps/emiilsd/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2018 Funderburker - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - ISO HHKB layout: - - * 2u Backspace - * ISO Enter - * split left Shift - * split right Shift - * Caps as Control - * 1u/1.5u/7u/1.5u//1u bottom row - */ - - /* 0: QWERTY */ - [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NO, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, - KC_LSFT, KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), KC_RSFT, - KC_NO, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_NO, KC_RALT, KC_CAPSLOCK, KC_NO - ), - - /* 1: Fn layer */ - [1] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, KC_UP, _______, _______, - _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, KC_PGUP, KC_LEFT, KC_RGHT, _______, _______, - _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_DOWN, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - -}; diff --git a/keyboards/gh60/keymaps/maartenwut/keymap.c b/keyboards/gh60/keymaps/maartenwut/keymap.c deleted file mode 100755 index d5e101e7f6..0000000000 --- a/keyboards/gh60/keymaps/maartenwut/keymap.c +++ /dev/null @@ -1,47 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _MA 0 -#define _GA 1 -#define _FL 2 -#define _AR 3 - -#define TRNS KC_TRNS -#define trigger_time 400 - -#define LSHIFT OSM(MOD_LSFT) -#define SPACE LT(_AR, KC_SPC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -// Main Layer -[_MA] = LAYOUT_60_ansi_split_bs_rshift( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, - KC_LCTL, KC_LGUI, KC_LALT, SPACE, KC_NO, KC_RALT, MO(_FL), KC_RCTRL), - -//Function Layer -[_FL] = LAYOUT_60_ansi_split_bs_rshift( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, KC_NO, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_PSCR, - TRNS, KC_MS_L, KC_MS_D, KC_MS_R, TRNS, TG(_GA), TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_VOLD, KC_VOLU, KC_MUTE, TRNS, KC_MPLY, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), - -//Arrow keys layer (space bar) -[_AR] = LAYOUT_60_ansi_split_bs_rshift( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TRNS, KC_NO, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_PGUP, KC_UP, KC_PGDN, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_LEFT, KC_DOWN, KC_RGHT, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), - -//Game layer (fn + g) -[_GA] = LAYOUT_60_ansi_split_bs_rshift( - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_NO, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - KC_LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, KC_SPC, TRNS, TRNS, MO(_FL), TRNS), - -}; diff --git a/keyboards/gh60/keymaps/maxr1998/config.h b/keyboards/gh60/keymaps/maxr1998/config.h deleted file mode 100644 index 8c3b9b2502..0000000000 --- a/keyboards/gh60/keymaps/maxr1998/config.h +++ /dev/null @@ -1,30 +0,0 @@ -/* -Copyright 2017 Max Rumpf alias Maxr1998 <max.rumpf1998@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define RGB_DI_PIN F4 // pin the DI on the WS2812B is hooked-up to -#define RGBLIGHT_ANIMATIONS // run RGB animations -#define RGBLED_NUM 6 // number of LEDs -#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue -#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation -#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) - -#endif
\ No newline at end of file diff --git a/keyboards/gh60/keymaps/maxr1998/keymap.c b/keyboards/gh60/keymaps/maxr1998/keymap.c deleted file mode 100644 index eff94ff657..0000000000 --- a/keyboards/gh60/keymaps/maxr1998/keymap.c +++ /dev/null @@ -1,83 +0,0 @@ -/* -Copyright 2017 Max Rumpf alias Maxr1998 <max.rumpf1998@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include QMK_KEYBOARD_H - -#define KC_EURO RALT(KC_5) - -#define SWITCH_LANG SEND_STRING(SS_LGUI(SS_TAP(X_SPACE))) -#define PRINT_UMLAUT(str) SWITCH_LANG;_delay_ms(90);SEND_STRING(str);SWITCH_LANG; - -enum custom_keycodes { - MCO_AE = SAFE_RANGE, - MCO_OE = SAFE_RANGE + 1, - MCO_UE = SAFE_RANGE + 2, - MCO_SS = SAFE_RANGE + 3, - TP_REQ = SAFE_RANGE + 10, - TP_ACC = SAFE_RANGE + 11 -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: qwertz */ - LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NO, \ - KC_LOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_HOME, KC_ENT, \ - KC_LSFT, KC_BSLS, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT,\ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, F(0), KC_LEFT, KC_DOWN, KC_RGHT), - /* 1: fn */ - LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_EURO, TP_REQ, TP_ACC, KC_TRNS, MCO_UE, KC_TRNS, MCO_OE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ - KC_TRNS, MCO_AE, MCO_SS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_SW,KC_TRNS, KC_GRV, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1) // to Fn overlay -}; - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - switch (keycode) { - case MCO_AE: - PRINT_UMLAUT("'"); // ä - return false; - case MCO_OE: - PRINT_UMLAUT(";"); // ö - return false; - case MCO_UE: - PRINT_UMLAUT("["); // ü - return false; - case MCO_SS: - PRINT_UMLAUT("-"); // ß - return false; - case TP_REQ: - SEND_STRING("/tpa "); - return false; - case TP_ACC: - SEND_STRING("/tpaccept"SS_TAP(X_ENTER)); - return false; - } - } - return true; -}
\ No newline at end of file diff --git a/keyboards/gh60/keymaps/maxr1998/rules.mk b/keyboards/gh60/keymaps/maxr1998/rules.mk deleted file mode 100644 index d64f11e1f0..0000000000 --- a/keyboards/gh60/keymaps/maxr1998/rules.mk +++ /dev/null @@ -1,6 +0,0 @@ -# Build Options -# comment out to disable the options. -# -RGBLIGHT_ENABLE = yes # Enable RGB Underglow -KEY_LOCK_ENABLE = yes # Enable key lock option -SKIP_GIT = yes diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h deleted file mode 100644 index ec2f8ceea0..0000000000 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ /dev/null @@ -1,178 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER geekhack -#define PRODUCT GH60 -#define DESCRIPTION t.m.k. keyboard firmware for GH60 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -// Rev A -// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } -// Rev B/C - #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * RGB Underglow - * These settings are for the F4 by default: - * - * - * #define ws2812_pin PF4 - * #define RGBLED_NUM 14 // Number of LEDs - * #define RGBLIGHT_HUE_STEP 10 - * #define RGBLIGHT_SAT_STEP 17 - * #define RGBLIGHT_VAL_STEP 17 - * - * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. - * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. - * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c -*/ - -#define RGB_DI_PIN F4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 // Number of LEDs -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/gh60/keymaps/robotmaxtron/keymap.c b/keyboards/gh60/keymaps/robotmaxtron/keymap.c deleted file mode 100644 index 649cbec389..0000000000 --- a/keyboards/gh60/keymaps/robotmaxtron/keymap.c +++ /dev/null @@ -1,225 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _AL 1 -#define _FL 2 -#define _UL 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - * Base layer, pretty standard ANSI layout. - * ,-----------------------------------------------------------. - * |F(12)| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Caps/Fn| A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl| - * `-----------------------------------------------------------' - */ - [_BL] = LAYOUT( - F(12),KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \ - KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \ - F(2),KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \ - KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_NO,KC_RALT,F(0),KC_APP,KC_RCTL), - - /* - * Locking arrow keys to WASD for when you need dedicated arrow keys - * ,-----------------------------------------------------------. - * | | | | | | | | | | | | | | | - * |-----------------------------------------------------------| - * | | |Up | | | | | | | | | | | | - * |-----------------------------------------------------------| - * | |Left|Down|Rght| | | | | | | | | | - * |-----------------------------------------------------------| - * | | | | | | | | | | | | | - * |-----------------------------------------------------------| - * | | | | | | | | | - * `-----------------------------------------------------------' - */ - [_AL] = LAYOUT( - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), - - - /* - * Primary function layer, mostly the same as the traditional Pok3r layout. - * ,-------------------------------------------------------------. - * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | - * |-------------------------------------------------------------| - * | |_AL| | | | |Calc|PgUp|Up|PgDn|Ptscn|Srlck|Pause| | - * |-------------------------------------------------------------| - * | | | | | | |Home|Left|Down|Rght|Ins| | | - * |-------------------------------------------------------------| - * | |_UL| | | | | | | | | | | - * |-------------------------------------------------------------| - * | | | | | | | | | - * `-------------------------------------------------------------' - */ - [_FL] = LAYOUT( - KC_GRAVE,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \ - KC_TRNS,F(1),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_CALC,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS, \ - KC_TRNS,KC_MUTE,KC__VOLDOWN,KC__VOLUP,KC_TRNS,KC_TRNS,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,F(3),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_END,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), - - /* - * Locking layer for controlling the underglow. - * - * ,-----------------------------------------------------------. - * | | | | | | | | | | | | | | | - * |-----------------------------------------------------------| - * | | | | | | | | | | | | | | | - * |-----------------------------------------------------------| - * | |On|Mode| | | | | | | | | | | - * |-----------------------------------------------------------| - * | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | | - * |-----------------------------------------------------------| - * | | | | | | | | | - * `-----------------------------------------------------------' - */ - [_UL] = LAYOUT( - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), -}; - -enum function_id { - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL, - SHIFT_ESC, -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay - [1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay - [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer - [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay - [4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow - [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode - [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - [12] = ACTION_FUNCTION(SHIFT_ESC), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -void matrix_scan_user(void) { - -// Layer LED indicators -// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster - uint32_t layer = layer_state; - if (layer & (1<<1)) { - gh60_wasd_leds_on(); - } else { - gh60_wasd_leds_off(); - } - - if (layer & (1<<2)) { - gh60_esc_led_on(); - } else { - gh60_esc_led_off(); - } -}; - -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { - case RGBLED_TOGGLE: - //led operations - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - static uint8_t shift_esc_shift_mask; - // Shift + ESC = ~ - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -}; diff --git a/keyboards/gh60/keymaps/robotmaxtron/readme.md b/keyboards/gh60/keymaps/robotmaxtron/readme.md deleted file mode 100644 index 8db7b3f65b..0000000000 --- a/keyboards/gh60/keymaps/robotmaxtron/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -robotmaxtron's GH60 Layout -===================== - -##Quantum MK Firmware -For the full Quantum feature list, see the parent readme.md. - -* Standard ANSI layout with Pok3r styled function layers -* ESC key led enables when on function layer -* Lockable layer with arrow keys on WASD with backlighting to indicate locked on arrow layer -* Neopixel/WS2812 RGB Underglow Support - -## Reference Images - - -### Additional Credits -Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards. diff --git a/keyboards/gh60/keymaps/robotmaxtron/rules.mk b/keyboards/gh60/keymaps/robotmaxtron/rules.mk deleted file mode 100644 index 6e5d6e1ec2..0000000000 --- a/keyboards/gh60/keymaps/robotmaxtron/rules.mk +++ /dev/null @@ -1,108 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable RGB Underglow - diff --git a/keyboards/gh60/keymaps/sethbc/keymap.c b/keyboards/gh60/keymaps/sethbc/keymap.c deleted file mode 100644 index 6c2c00ec27..0000000000 --- a/keyboards/gh60/keymaps/sethbc/keymap.c +++ /dev/null @@ -1,75 +0,0 @@ -#include QMK_KEYBOARD_H - -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: qwerty */ - LAYOUT_60_ansi_split_bs_rshift( - F(0),KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,\ - KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT,\ - KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,F(1),\ - KC_LCTL,KC_LALT,KC_LGUI, KC_SPC, KC_RGUI,KC_RALT,KC_APP,KC_RCTL), - /* 1: fn */ - LAYOUT_60_ansi_split_bs_rshift( - KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_TRNS,KC_TRNS,\ - KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,\ - KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_PENT,\ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END,KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS,\ - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), -}; - -enum function_id { - SHIFT_ESC, -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -void matrix_scan_user(void) { - -} - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; - switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -} diff --git a/keyboards/gh60/keymaps/sethbc/rules.mk b/keyboards/gh60/keymaps/sethbc/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/gh60/keymaps/sethbc/rules.mk +++ /dev/null diff --git a/keyboards/gh60/keymaps/xyverz/keymap.c b/keyboards/gh60/keymaps/xyverz/keymap.c deleted file mode 100644 index e47fcc2f94..0000000000 --- a/keyboards/gh60/keymaps/xyverz/keymap.c +++ /dev/null @@ -1,142 +0,0 @@ -#include QMK_KEYBOARD_H - - -extern keymap_config_t keymap_config; - - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QW 0 -#define _DV 1 -#define _CM 2 -#define _FL 3 - -// Macro name shortcuts -#define QWERTY M(_QW) -#define DVORAK M(_DV) -#define COLEMAK M(_CM) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* - * _QW: Qwerty Layer - * ,-----------------------------------------------------------. - * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Fn | A| S| D| F| G| H| J| K| L| ;| '| Return| - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| - * |-----------------------------------------------------------| - * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| - * `-----------------------------------------------------------' - */ - /* Layer 0: Qwerty */ - [_QW] = LAYOUT_60_ansi( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT , - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL) - ), - - /* - * _DV: Dvorak Layer - * ,-----------------------------------------------------------. - * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]| Backsp| - * |-----------------------------------------------------------| - * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| - * |-----------------------------------------------------------| - * |Fn | A| O| E| U| I| D| H| T| N| S| -| Return| - * |-----------------------------------------------------------| - * |Shift | ;| Q| J| K| X| B| M| W| V| Z| Shift| - * |-----------------------------------------------------------| - * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| - * `-----------------------------------------------------------' - */ - /* Layer 1: Dvorak */ - [_DV] = LAYOUT_60_ansi( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, - MO(_FL), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL) - ), - - /* - * _CM: Colemak Layer - * ,-----------------------------------------------------------. - * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp| - * |-----------------------------------------------------------| - * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| - * |-----------------------------------------------------------| - * |Fn | A| R| S| T| D| H| N| E| I| O| '| Return| - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| K| M| ,| .| /| Shift| - * |-----------------------------------------------------------| - * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| - * `-----------------------------------------------------------' - */ - /* Layer 2: Colemak */ - [_CM] = LAYOUT_60_ansi( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, - MO(_FL), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL) - ), - - /* - * _FL: Function Layer - * ,-----------------------------------------------------------. - * | |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Del| - * |-----------------------------------------------------------| - * | | | | | | | |PgU| Up|PgD|PSc|SLk|Pau| | - * |-----------------------------------------------------------| - * | | |MPr|MPl|MNx| |Hom| Lt| Dn| Rt| | | | - * |-----------------------------------------------------------| - * |CAPS | |Mut|VlD|VlU| |End| | | | | | - * |-----------------------------------------------------------| - * |_QW |_DV |_CM | | | | | | - * `-----------------------------------------------------------' - */ - /* Layer 3: Functions */ - [_FL] = LAYOUT_60_ansi( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL , - _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______, - _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, - KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_END, _______, _______, _______, _______, _______, - QWERTY, DVORAK, COLEMAK, _______, _______, _______, _______, _______ - ), - -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _DV: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_DV); - } - break; - case _QW: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QW); - } - break; - case _CM: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_CM); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/gh60/pinout.txt b/keyboards/gh60/pinout.txt deleted file mode 100644 index e9bf1983a5..0000000000 --- a/keyboards/gh60/pinout.txt +++ /dev/null @@ -1,18 +0,0 @@ - /* Column pin configuration - * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 - * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) - */ - - /* Row pin configuration - * row: 0 1 2 3 4 - * pin: D0 D1 D2 D3 D5 - */ - - GPIO pads - 0 F7 WASD LEDs - 1 F6 ESC LED - 2 F5 FN LED - 3 F4 POKER Arrow LEDs - - B2 Capslock LED - B0 not connected
\ No newline at end of file diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md deleted file mode 100644 index a1469accfd..0000000000 --- a/keyboards/gh60/readme.md +++ /dev/null @@ -1,52 +0,0 @@ -GH60 -=== - - - -A common 60% PCB. - -Keyboard Maintainer: QMK Community -Hardware Supported: GH60 rev. B and rev. C -Hardware Availability: http://blog.komar.be/projects/gh60-programmable-keyboard/ - -Make example for this keyboard (after setting up your build environment): - - make gh60:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - - -## GH60 Hardware Information - - /* Column pin configuration - * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 - * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) - */ - - /* Row pin configuration - * row: 0 1 2 3 4 - * pin: D0 D1 D2 D3 D5 - */ - - GPIO pads - 0 F7 WASD LEDs - 1 F6 ESC LED - 2 F5 FN LED - 3 F4 POKER Arrow LEDs - - B2 Capslock LED - B0 not connected - -Functions to controls LED clusters - - gh60_caps_led_on() - gh60_poker_leds_on() - gh60_fn_led_on() - gh60_esc_led_on() - gh60_wasd_leds_on() - - gh60_caps_led_off() - gh60_poker_leds_off() - gh60_fn_led_off() - gh60_esc_led_off() - gh60_wasd_leds_off() diff --git a/keyboards/gh60/rules.mk b/keyboards/gh60/rules.mk deleted file mode 100644 index 37511432aa..0000000000 --- a/keyboards/gh60/rules.mk +++ /dev/null @@ -1,68 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID - -LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift
\ No newline at end of file |