diff options
Diffstat (limited to 'keyboards/gh60/satan/readme.md')
| -rw-r--r-- | keyboards/gh60/satan/readme.md | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/keyboards/gh60/satan/readme.md b/keyboards/gh60/satan/readme.md new file mode 100644 index 0000000000..f6a56e4a80 --- /dev/null +++ b/keyboards/gh60/satan/readme.md @@ -0,0 +1,35 @@ +# Satan GH60 + +A clone of the GH60 60% keyboard, with full backlighting support. + +Keyboard Maintainer: QMK Community +Hardware Supported: Satan GH60 PCB +Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/ + +Make example for this keyboard (after setting up your build environment): + + make gh60/satan:default + +**Note:** This GH60 Satan firmware will not be compatible with the GH60 Rev C PCB. Conversely, the GH60 Rev C firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## RGB Underglow (WS2812B LED Strip) + +This board also supports underglow with a slight mod. + +Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so: + + + +Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB: + + + +## ISP Header + +If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board: + +| 1 | 2 | 3 | 4 | 5 | 6 | 7 | +|---|----|---|----|-----|---|----| +|VCC|MISO|SCK|MOSI|RESET|GND|*NC*| |