6 files changed, 0 insertions, 159 deletions
diff --git a/keyboards/four_banger/config.h b/keyboards/four_banger/config.h
deleted file mode 100644
index 4567cec8e0..0000000000
--- a/keyboards/four_banger/config.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x2004
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    1up Keyboards
-#define PRODUCT         Four Banger
-#define DESCRIPTION     2x2 grid
-
-/* key matrix size */
-#define MATRIX_ROWS 2
-#define MATRIX_COLS 2
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B2, B6 }
-#define MATRIX_COL_PINS { B5, B4 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* number of backlight levels */
-
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 0
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define RGB_DI_PIN E6
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 1
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
-
-#endif
diff --git a/keyboards/four_banger/four_banger.c b/keyboards/four_banger/four_banger.c
deleted file mode 100644
index 20aefb61d9..0000000000
--- a/keyboards/four_banger/four_banger.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "four_banger.h"
-\ No newline at end of file
diff --git a/keyboards/four_banger/four_banger.h b/keyboards/four_banger/four_banger.h
deleted file mode 100644
index a6da8dd0b7..0000000000
--- a/keyboards/four_banger/four_banger.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef KB_H
-#define KB_H
-
-#include "quantum.h"
-
-#define LAYOUT_ortho_2x2( \
-  K00, K01, \
-  K10, K11  \
-) { \
-  { K00, K01 }, \
-  { K10, K11 }  \
-}
-
-#endif
diff --git a/keyboards/four_banger/keymaps/default/keymap.c b/keyboards/four_banger/keymaps/default/keymap.c
deleted file mode 100644
index fc04e0fb1b..0000000000
--- a/keyboards/four_banger/keymaps/default/keymap.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#include QMK_KEYBOARD_H
-
-enum custom_keycodes {
-  UP_URL = SAFE_RANGE
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT_ortho_2x2(
-    KC_1, KC_U,
-    KC_P, UP_URL
-  ),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case UP_URL:
-      if (record->event.pressed) {
-        SEND_STRING("http://1upkeyboards.com");
-      }
-      return false;
-      break;
-  }
-  return true;
-}
diff --git a/keyboards/four_banger/readme.md b/keyboards/four_banger/readme.md
deleted file mode 100644
index 913ca6ee85..0000000000
--- a/keyboards/four_banger/readme.md
+++ /dev/null
@@ -1,14 +0,0 @@
-Four Banger
-===
-
-A 2x2 macro pad sold by 1up Keyboards - designed by Bishop Keyboards
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: Four Banger Keyboard PCB  
-Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make four_banger:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-\ No newline at end of file
diff --git a/keyboards/four_banger/rules.mk b/keyboards/four_banger/rules.mk
deleted file mode 100644
index 212e74059e..0000000000
--- a/keyboards/four_banger/rules.mk
+++ /dev/null
@@ -1,56 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
-CONSOLE_ENABLE = no    # Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes      # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = yes
-\ No newline at end of file