diff options
Diffstat (limited to 'keyboards/fortitude60')
-rw-r--r-- | keyboards/fortitude60/config.h | 24 | ||||
-rw-r--r-- | keyboards/fortitude60/fortitude60.c | 1 | ||||
-rw-r--r-- | keyboards/fortitude60/fortitude60.h | 26 | ||||
-rw-r--r-- | keyboards/fortitude60/info.json | 12 | ||||
-rw-r--r-- | keyboards/fortitude60/keymaps/default/config.h | 33 | ||||
-rw-r--r-- | keyboards/fortitude60/keymaps/default/keymap.c | 185 | ||||
-rw-r--r-- | keyboards/fortitude60/keymaps/default/rules.mk | 2 | ||||
-rw-r--r-- | keyboards/fortitude60/matrix.c | 423 | ||||
-rw-r--r-- | keyboards/fortitude60/readme.md | 15 | ||||
-rw-r--r-- | keyboards/fortitude60/rev1/config.h | 85 | ||||
-rw-r--r-- | keyboards/fortitude60/rev1/rev1.c | 22 | ||||
-rw-r--r-- | keyboards/fortitude60/rev1/rev1.h | 42 | ||||
-rw-r--r-- | keyboards/fortitude60/rev1/rules.mk | 0 | ||||
-rw-r--r-- | keyboards/fortitude60/rules.mk | 72 | ||||
-rw-r--r-- | keyboards/fortitude60/serial.c | 590 | ||||
-rw-r--r-- | keyboards/fortitude60/serial.h | 89 | ||||
-rw-r--r-- | keyboards/fortitude60/serial_config.h | 10 | ||||
-rw-r--r-- | keyboards/fortitude60/split_util.c | 85 | ||||
-rw-r--r-- | keyboards/fortitude60/split_util.h | 18 |
19 files changed, 0 insertions, 1734 deletions
diff --git a/keyboards/fortitude60/config.h b/keyboards/fortitude60/config.h deleted file mode 100644 index 27a44ab928..0000000000 --- a/keyboards/fortitude60/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* -Copyright 2017 Danny Nguyen <danny@hexwire.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" -#include <serial_config.h> - -#endif // CONFIG_H diff --git a/keyboards/fortitude60/fortitude60.c b/keyboards/fortitude60/fortitude60.c deleted file mode 100644 index d35b286d11..0000000000 --- a/keyboards/fortitude60/fortitude60.c +++ /dev/null @@ -1 +0,0 @@ -#include "fortitude60.h" diff --git a/keyboards/fortitude60/fortitude60.h b/keyboards/fortitude60/fortitude60.h deleted file mode 100644 index db2ce07a68..0000000000 --- a/keyboards/fortitude60/fortitude60.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef FORTITUDE60_H -#define FORTITUDE60_H - -#ifdef KEYBOARD_fortitude60_rev1 - #include "rev1.h" -#endif - -#include "quantum.h" - -// Used to create a keymap using only KC_ prefixed keys -#define LAYOUT_kc( \ - L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, L34, L35, LT5, RT5, R30, R31, R32, R33, R34, R35, \ - LT0, LT1, LT2, LT3, LT4, RT4, RT3, RT2, RT1, RT0 \ - ) \ - LAYOUT( \ - KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ - KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ - KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ - KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##LT5, KC_##RT5, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \ - KC_##LT0, KC_##LT1, KC_##LT2, KC_##LT3, KC_##LT4, KC_##RT4, KC_##RT3, KC_##RT2, KC_##RT1, KC_##RT0 \ - ) - -#endif diff --git a/keyboards/fortitude60/info.json b/keyboards/fortitude60/info.json deleted file mode 100644 index ceb2cf4f04..0000000000 --- a/keyboards/fortitude60/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Fortitude60", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"L00", "x":0, "y":0}, {"label":"L01", "x":1, "y":0}, {"label":"L02", "x":2, "y":0}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0}, {"label":"L05", "x":5, "y":0}, {"label":"R00", "x":9, "y":0}, {"label":"R01", "x":10, "y":0}, {"label":"R02", "x":11, "y":0}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0}, {"label":"R05", "x":14, "y":0}, {"label":"L10", "x":0, "y":1}, {"label":"L11", "x":1, "y":1}, {"label":"L12", "x":2, "y":1}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1}, {"label":"L15", "x":5, "y":1}, {"label":"R10", "x":9, "y":1}, {"label":"R11", "x":10, "y":1}, {"label":"R12", "x":11, "y":1}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1}, {"label":"R15", "x":14, "y":1}, {"label":"L20", "x":0, "y":2}, {"label":"L21", "x":1, "y":2}, {"label":"L22", "x":2, "y":2}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2}, {"label":"L25", "x":5, "y":2}, {"label":"R20", "x":9, "y":2}, {"label":"R21", "x":10, "y":2}, {"label":"R22", "x":11, "y":2}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2}, {"label":"R25", "x":14, "y":2}, {"label":"L30", "x":0, "y":3}, {"label":"L31", "x":1, "y":3}, {"label":"L32", "x":2, "y":3}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3}, {"label":"L35", "x":5, "y":3}, {"label":"LT5", "x":6, "y":3}, {"label":"RT5", "x":8, "y":3}, {"label":"R30", "x":9, "y":3}, {"label":"R31", "x":10, "y":3}, {"label":"R32", "x":11, "y":3}, {"label":"R33", "x":12, "y":3}, {"label":"R34", "x":13, "y":3}, {"label":"R35", "x":14, "y":3}, {"label":"LT0", "x":2, "y":4}, {"label":"LT1", "x":3, "y":4}, {"label":"LT2", "x":4, "y":4}, {"label":"LT3", "x":5, "y":4}, {"label":"LT4", "x":6, "y":4}, {"label":"RT4", "x":8, "y":4}, {"label":"RT3", "x":9, "y":4}, {"label":"RT2", "x":10, "y":4}, {"label":"RT1", "x":11, "y":4}, {"label":"RT0", "x":12, "y":4}] - } - } -} diff --git a/keyboards/fortitude60/keymaps/default/config.h b/keyboards/fortitude60/keymaps/default/config.h deleted file mode 100644 index b6c6273d92..0000000000 --- a/keyboards/fortitude60/keymaps/default/config.h +++ /dev/null @@ -1,33 +0,0 @@ -/* -Copyright 2017 Danny Nguyen <danny@hexwire.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define USE_SERIAL - -/* Select hand configuration */ - -// #define MASTER_LEFT -// #define MASTER_RIGHT -#define EE_HANDS - -/* #undef RGBLED_NUM */ -/* #define RGBLIGHT_ANIMATIONS */ -/* #define RGBLED_NUM 12 */ -/* #define RGBLIGHT_HUE_STEP 8 */ -/* #define RGBLIGHT_SAT_STEP 8 */ -/* #define RGBLIGHT_VAL_STEP 8 */ diff --git a/keyboards/fortitude60/keymaps/default/keymap.c b/keyboards/fortitude60/keymaps/default/keymap.c deleted file mode 100644 index d20ca40fbb..0000000000 --- a/keyboards/fortitude60/keymaps/default/keymap.c +++ /dev/null @@ -1,185 +0,0 @@ -#include QMK_KEYBOARD_H - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - ADJUST, -}; - -#define LOWER MO(_LOWER) -#define RAISE MO(_RAISE) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,-----------------------------------------. ,-----------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Esc | A | S | D | F | G | | H | J | K | L | ; | " | - * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | [ | ] | N | M | , | . | / |Enter | - * `-------------+------+------+------+------+------+------+------+------+------+------+-------------' - * | GUI | Alt |Lower |Space | Ctrl |Enter |Space |Raise | Alt | GUI | - * `---------------------------------------------------------------------' - */ -[_QWERTY] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_LCTL, KC_ENT, KC_SPC, RAISE, KC_RALT, KC_RGUI\ -), - -/* Colemak - * ,-----------------------------------------. ,-----------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Esc | A | R | S | T | D | | H | N | E | I | O | " | - * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | [ | ] | K | M | , | . | / |Enter | - * `-------------+------+------+------+------+------+------+------+------+------+------+-------------' - * | GUI | Alt |Lower |Space | Ctrl |Enter |Space |Raise | Alt | GUI | - * `---------------------------------------------------------------------' - */ -[_COLEMAK] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_LCTL, KC_ENT, KC_SPC, RAISE, KC_RALT, KC_RGUI\ -), - -/* Dvorak - * ,-----------------------------------------. ,-----------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Esc | A | O | E | U | I | | D | H | T | N | S | / | - * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | [ | ] | B | M | W | V | Z |Enter | - * `-------------+------+------+------+------+------+------+------+------+------+------+-------------' - * | GUI | Alt |Lower |Space | Ctrl |Enter |Space |Raise | Alt | GUI | - * `---------------------------------------------------------------------' - */ -[_DVORAK] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LBRC, KC_RBRC, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ - KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_LCTL, KC_ENT, KC_SPC, RAISE, KC_RALT, KC_RGUI\ -), - -/* Lower - * ,-----------------------------------------. ,-----------------------------------------. - * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Del | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | | \ | | | - * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | | | F12 |ISO ~ |ISO | | | | | - * `-------------+------+------+------+------+------+------+------+------+------+------+-------------' - * | | | | | | | | | | | - * `---------------------------------------------------------------------' - */ -[_LOWER] = LAYOUT( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,\ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\ -), - -/* Raise - * ,-----------------------------------------. ,-----------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | - * |------+------+------+------+------+------. ,------+------+------+------+------+------| - * | ` | 1 | ↑ | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+------. ,------+------+------+------+------+------| - * | Del | ← | ↓ | → | F4 | F5 | | F6 | - | = | [ | ] | | | - * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | | | F12 |ISO # |ISO / | | | | - * `-------------+------+------+------+------+------+------+------+------+------+------+-------------' - * | | | | | | | | | | | - * `---------------------------------------------------------------------' - */ -[_RAISE] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_GRV, KC_1, KC_UP, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_F4, KC_F5, KC_F6,KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------. ,-----------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------. ,------+------+------+------+------+------| - * | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn| |Sat Up|Sat Dn|Val Up|Val Dn| | Bksp | - * |------+------+------+------+------+------. ,------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm| |AGswap| |BL TOG|BL STP| | | - * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| - * |Qwerty|Colemk|Dvorak| | | | | | | | | | | | - * `-------------+------+------+------+------+------+------+------+------+------+------+-------------' - * | | | | | | | | | | | - * `---------------------------------------------------------------------' - */ -[_ADJUST] = LAYOUT( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - _______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, KC_BSPC, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, BL_TOGG, BL_STEP, _______, _______, \ - QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\ -) - - -}; - -uint32_t layer_state_set_user(uint32_t state) { - return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - return false; - break; - } - return true; -} diff --git a/keyboards/fortitude60/keymaps/default/rules.mk b/keyboards/fortitude60/keymaps/default/rules.mk deleted file mode 100644 index 1964bd0a7c..0000000000 --- a/keyboards/fortitude60/keymaps/default/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -RGBLIGHT_ENABLE = no -BACKLIGHT_ENABLE = no
\ No newline at end of file diff --git a/keyboards/fortitude60/matrix.c b/keyboards/fortitude60/matrix.c deleted file mode 100644 index 565f417d85..0000000000 --- a/keyboards/fortitude60/matrix.c +++ /dev/null @@ -1,423 +0,0 @@ -/* -Copyright 2017 Danny Nguyen <danny@keeb.io> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" -#include "timer.h" - -#ifdef BACKLIGHT_ENABLE -#include "backlight.h" -extern backlight_config_t backlight_config; -#endif - -#include "serial.h" - -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 -#endif - -#if (DEBOUNCING_DELAY > 0) - static uint16_t debouncing_time; - static bool debouncing = false; -#endif - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#else -# error "Currently only supports 8 COLS" -#endif -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -#define ERROR_DISCONNECT_COUNT 5 - -#define SERIAL_LED_ADDR 0x00 - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -#if (DIODE_DIRECTION == COL2ROW) - static void init_cols(void); - static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); - static void unselect_rows(void); - static void select_row(uint8_t row); - static void unselect_row(uint8_t row); -#elif (DIODE_DIRECTION == ROW2COL) - static void init_rows(void); - static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); - static void unselect_cols(void); - static void unselect_col(uint8_t col); - static void select_col(uint8_t col); -#endif - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); - -} - -uint8_t _matrix_scan(void) -{ - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); -#if (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) - bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); - - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } - -# else - read_cols_on_row(matrix+offset, current_row); -# endif - - } - -#elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) - bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } -# else - read_rows_on_col(matrix+offset, current_col); -# endif - - } -#endif - -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - debouncing = false; - } -# endif - - return 1; -} - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - -#ifdef BACKLIGHT_ENABLE - // Write backlight level for slave to read - serial_master_buffer[SERIAL_LED_ADDR] = backlight_config.enable ? backlight_config.level : 0; -#endif - return 0; -} - - -uint8_t matrix_scan(void) -{ - uint8_t ret = _matrix_scan(); - - if( serial_transaction() ) { - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } - -#ifdef BACKLIGHT_ENABLE - // Read backlight level sent from master and update level on slave - backlight_set(serial_master_buffer[SERIAL_LED_ADDR]); -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -#if (DIODE_DIRECTION == COL2ROW) - -static void init_cols(void) -{ - for(uint8_t x = 0; x < MATRIX_COLS; x++) { - uint8_t pin = col_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) -{ - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - - // Select the col pin to read (active low) - uint8_t pin = col_pins[col_index]; - uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); - - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - -static void select_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -#elif (DIODE_DIRECTION == ROW2COL) - -static void init_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) -{ - bool matrix_changed = false; - - // Select col and wait for col selecton to stabilize - select_col(current_col); - wait_us(30); - - // For each row... - for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) - { - - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - - // Check row pin state - if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) - { - // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - else - { - // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) - { - matrix_changed = true; - } - } - - // Unselect col - unselect_col(current_col); - - return matrix_changed; -} - -static void select_col(uint8_t col) -{ - uint8_t pin = col_pins[col]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_col(uint8_t col) -{ - uint8_t pin = col_pins[col]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_cols(void) -{ - for(uint8_t x = 0; x < MATRIX_COLS; x++) { - uint8_t pin = col_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -#endif diff --git a/keyboards/fortitude60/readme.md b/keyboards/fortitude60/readme.md deleted file mode 100644 index 369f5e24b0..0000000000 --- a/keyboards/fortitude60/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Fortitude60 - -![Fortitude60](https://i.imgur.com/Tbznwgg.jpg) - -👊A 60% (12x5) split keyboard with staggerd column layout.👊 - -Keyboard Maintainer: [Pekaso](https://github.com/Pekaso) [@Pekaso](https://twitter.com/Pekaso) -Hardware Supported: Fortitude60 PCB, Beetle 32u4 -Hardware Availability: [plustk2s.com](http://plustk2s.com) - -Make example for this keyboard (after setting up your build environment): - - make fortitude60/rev1:default:avrdude - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
\ No newline at end of file diff --git a/keyboards/fortitude60/rev1/config.h b/keyboards/fortitude60/rev1/config.h deleted file mode 100644 index 2fa179ae2e..0000000000 --- a/keyboards/fortitude60/rev1/config.h +++ /dev/null @@ -1,85 +0,0 @@ -/* -Copyright 2017 Danny Nguyen <danny@keeb.io> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H - -#include QMK_KEYBOARD_CONFIG_H - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xCB10 -#define PRODUCT_ID 0x1156 -#define DEVICE_VER 0x0100 -#define MANUFACTURER Pekaso -#define PRODUCT The Fortitude60 Keyboard -#define DESCRIPTION Split 60 keyboard. - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 6 - -// wiring of each half -#define MATRIX_ROW_PINS { D1, D0, D3, B7, B6 } -#define MATRIX_COL_PINS { F7, F6, F5, B3, B2, B1 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#ifdef BACKLIGHT_ENABLE - #define BACKLIGHT_PIN B5 - #define BACKLIGHT_LEVELS 9 -// #define BACKLIGHT_BREATHING -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* ws2812 RGB LED */ -#ifdef RGBLIGHT_ENABLE - #define RGB_DI_PIN B5 - - #define RGBLED_NUM 18 // Number of LEDs */ -#endif -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/fortitude60/rev1/rev1.c b/keyboards/fortitude60/rev1/rev1.c deleted file mode 100644 index 5f4cd32f69..0000000000 --- a/keyboards/fortitude60/rev1/rev1.c +++ /dev/null @@ -1,22 +0,0 @@ -#include "rev1.h" - -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -#endif - -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - diff --git a/keyboards/fortitude60/rev1/rev1.h b/keyboards/fortitude60/rev1/rev1.h deleted file mode 100644 index 5b35720bc3..0000000000 --- a/keyboards/fortitude60/rev1/rev1.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef REV1_H -#define REV1_H - -#include "fortitude60.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - - -#ifdef USE_I2C -#include <stddef.h> -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/interrupt.h> -#endif -#endif - -//void promicro_bootloader_jmp(bool program); - -// Standard Keymap -// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) -#define LAYOUT( \ - L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, L34, L35, LT5, RT5, R30, R31, R32, R33, R34, R35, \ - LT0, LT1, LT2, LT3, LT4, RT4, RT3, RT2, RT1, RT0 \ - ) \ - { \ - { L00, L01, L02, L03, L04, L05 }, \ - { L10, L11, L12, L13, L14, L15 }, \ - { L20, L21, L22, L23, L24, L25 }, \ - { L30, L31, L32, L33, L34, L35 }, \ - { LT0, LT1, LT2, LT3, LT4, LT5 }, \ - { R05, R04, R03, R02, R01, R00 }, \ - { R15, R14, R13, R12, R11, R10 }, \ - { R25, R24, R23, R22, R21, R20 }, \ - { R35, R34, R33, R32, R31, R30 }, \ - { RT0, RT1, RT2, RT3, RT4, RT5 } \ - } - -#endif diff --git a/keyboards/fortitude60/rev1/rules.mk b/keyboards/fortitude60/rev1/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/fortitude60/rev1/rules.mk +++ /dev/null diff --git a/keyboards/fortitude60/rules.mk b/keyboards/fortitude60/rules.mk deleted file mode 100644 index 3d1745c6f7..0000000000 --- a/keyboards/fortitude60/rules.mk +++ /dev/null @@ -1,72 +0,0 @@ -SRC += matrix.c \ - split_util.c \ - serial.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -USE_SERIAL = yes # Serial support only on fortitude60 -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes - -DEFAULT_FOLDER = fortitude60/rev1 diff --git a/keyboards/fortitude60/serial.c b/keyboards/fortitude60/serial.c deleted file mode 100644 index 6006ebf1bd..0000000000 --- a/keyboards/fortitude60/serial.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stddef.h> -#include <stdbool.h> -#include "serial.h" -//#include <pro_micro.h> - -#ifdef SOFT_SERIAL_PIN - -#ifdef __AVR_ATmega32U4__ - // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. - #ifdef USE_I2C - #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 - #error Using ATmega32U4 I2C, so can not use PD0, PD1 - #endif - #endif - - #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 - #define SERIAL_PIN_DDR DDRD - #define SERIAL_PIN_PORT PORTD - #define SERIAL_PIN_INPUT PIND - #if SOFT_SERIAL_PIN == D0 - #define SERIAL_PIN_MASK _BV(PD0) - #define EIMSK_BIT _BV(INT0) - #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) - #define SERIAL_PIN_INTERRUPT INT0_vect - #elif SOFT_SERIAL_PIN == D1 - #define SERIAL_PIN_MASK _BV(PD1) - #define EIMSK_BIT _BV(INT1) - #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) - #define SERIAL_PIN_INTERRUPT INT1_vect - #elif SOFT_SERIAL_PIN == D2 - #define SERIAL_PIN_MASK _BV(PD2) - #define EIMSK_BIT _BV(INT2) - #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) - #define SERIAL_PIN_INTERRUPT INT2_vect - #elif SOFT_SERIAL_PIN == D3 - #define SERIAL_PIN_MASK _BV(PD3) - #define EIMSK_BIT _BV(INT3) - #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) - #define SERIAL_PIN_INTERRUPT INT3_vect - #endif - #elif SOFT_SERIAL_PIN == E6 - #define SERIAL_PIN_DDR DDRE - #define SERIAL_PIN_PORT PORTE - #define SERIAL_PIN_INPUT PINE - #define SERIAL_PIN_MASK _BV(PE6) - #define EIMSK_BIT _BV(INT6) - #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) - #define SERIAL_PIN_INTERRUPT INT6_vect - #else - #error invalid SOFT_SERIAL_PIN value - #endif - -#else - #error serial.c now support ATmega32U4 only -#endif - -//////////////// for backward compatibility //////////////////////////////// -#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION) -/* --- USE OLD API (compatible with let's split serial.c) */ - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; - #endif - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - #endif - uint8_t volatile status0 = 0; - -SSTD_t transactions[] = { - { (uint8_t *)&status0, - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - #else - 0, (uint8_t *)NULL, - #endif - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - #else - 0, (uint8_t *)NULL, - #endif - } -}; - -void serial_master_init(void) -{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } - -void serial_slave_init(void) -{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers() -{ - int result; - result = soft_serial_transaction(); - return result; -} - -#endif // end of OLD API (compatible with let's split serial.c) -//////////////////////////////////////////////////////////////////////////// - -#define ALWAYS_INLINE __attribute__((always_inline)) -#define NO_INLINE __attribute__((noinline)) -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -#define ODD_PARITY 1 -#define EVEN_PARITY 0 -#define PARITY EVEN_PARITY - -#ifdef SERIAL_DELAY - // custom setup in config.h - // #define TID_SEND_ADJUST 2 - // #define SERIAL_DELAY 6 // micro sec - // #define READ_WRITE_START_ADJUST 30 // cycles - // #define READ_WRITE_WIDTH_ADJUST 8 // cycles -#else -// ============ Standard setups ============ - -#ifndef SELECT_SOFT_SERIAL_SPEED -#define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -#if __GNUC__ < 6 - #define TID_SEND_ADJUST 14 -#else - #define TID_SEND_ADJUST 2 -#endif - -#if SELECT_SOFT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 34 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 36 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 5 - // Ultra Low speed - #define SERIAL_DELAY 48 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#else -#error invalid SELECT_SOFT_SERIAL_SPEED value -#endif /* SELECT_SOFT_SERIAL_SPEED */ -#endif /* SERIAL_DELAY */ - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH_US 1 -#ifndef SERIAL_USE_MULTI_TRANSACTION - #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY -#else - #define SLAVE_INT_ACK_WIDTH_UNIT 2 - #define SLAVE_INT_ACK_WIDTH 4 -#endif - -static SSTD_t *Transaction_table = NULL; -static uint8_t Transaction_table_size = 0; - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static void serial_output(void) ALWAYS_INLINE; -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static void serial_low(void) ALWAYS_INLINE; -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static void serial_high(void) ALWAYS_INLINE; -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_output(); - serial_high(); -} - -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_input_with_pullup(); - - // Enable INT0-INT3,INT6 - EIMSK |= EIMSK_BIT; -#if SERIAL_PIN_MASK == _BV(PE6) - // Trigger on falling edge of INT6 - EICRB &= EICRx_BIT; -#else - // Trigger on falling edge of INT0-INT3 - EICRA &= EICRx_BIT; -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static -void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { - serial_delay_half1(); // read the middle of pulses - if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; - } else { - byte = (byte << 1) | 0; p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb)? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if(p & 1) { serial_high(); } - else { serial_low(); } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data,8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static -void change_sender2reciver(void) { - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 -} - -inline static -void change_reciver2sender(void) { - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); //3 - serial_delay_half1(); //4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) -{ - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - -#ifndef SERIAL_USE_MULTI_TRANSACTION - serial_low(); - serial_output(); - SSTD_t *trans = Transaction_table; -#else - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount,7); - tid = bits>>3; - bits = (bits&7) != nibble_bits_count(tid); - if( bits || pecount> 0 || tid > Transaction_table_size ) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); - SSTD_t *trans = &Transaction_table[tid]; - serial_low(); // response step2 ack high->low -#endif - - // target send phase - if( trans->target2initiator_buffer_size > 0 ) - serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if( trans->initiator2target_buffer_size > 0 ) { - if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); //weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void) { - SSTD_t *trans = Transaction_table; -#else -int soft_serial_transaction(int sstd_index) { - if( sstd_index > Transaction_table_size ) - return TRANSACTION_TYPE_ERROR; - SSTD_t *trans = &Transaction_table[sstd_index]; -#endif - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - -#ifndef SERIAL_USE_MULTI_TRANSACTION - // wait for the target response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the target is present - if (serial_read_pin()) { - // target failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - -#else - // send transaction table index - int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 7); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while( !serial_read_pin() ) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for( int i = 0; serial_read_pin(); i++ ) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } -#endif - - // initiator recive phase - // if the target is present syncronize with it - if( trans->target2initiator_buffer_size > 0 ) { - if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if( trans->initiator2target_buffer_size > 0 ) { - serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index) { - SSTD_t *trans = &Transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0;; - sei(); - return retval; -} -#endif - -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/fortitude60/serial.h b/keyboards/fortitude60/serial.h deleted file mode 100644 index 2e53928df2..0000000000 --- a/keyboards/fortitude60/serial.h +++ /dev/null @@ -1,89 +0,0 @@ -#ifndef SOFT_SERIAL_H -#define SOFT_SERIAL_H - -#include <stdbool.h> - -// ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in config.h -// ///////////////////////////////////////////////////////////////// -// ex. -// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -// -// //// USE OLD API (compatible with let's split serial.c) -// ex. -// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -// #define SERIAL_MASTER_BUFFER_LENGTH 1 -// -// //// USE NEW API -// //// USE simple API (using signle-type transaction function) -// #define SERIAL_USE_SINGLE_TRANSACTION -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION -// -// ///////////////////////////////////////////////////////////////// - - -//////////////// for backward compatibility //////////////////////////////// -#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION) -/* --- USE OLD API (compatible with let's split serial.c) */ - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; - #endif - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - #endif - - void serial_master_init(void); - void serial_slave_init(void); - int serial_update_buffers(void); - -#endif // end of USE OLD API -//////////////////////////////////////////////////////////////////////////// - -// Soft Serial Transaction Descriptor -typedef struct _SSTD_t { - uint8_t *status; - uint8_t initiator2target_buffer_size; - uint8_t *initiator2target_buffer; - uint8_t target2initiator_buffer_size; - uint8_t *target2initiator_buffer; -} SSTD_t; -#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) - -// initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); -// target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); - -// initiator resullt -#define TRANSACTION_END 0 -#define TRANSACTION_NO_RESPONSE 0x1 -#define TRANSACTION_DATA_ERROR 0x2 -#define TRANSACTION_TYPE_ERROR 0x4 -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void); -#else -int soft_serial_transaction(int sstd_index); -#endif - -// target status -// *SSTD_t.status has -// initiator: -// TRANSACTION_END -// or TRANSACTION_NO_RESPONSE -// or TRANSACTION_DATA_ERROR -// target: -// TRANSACTION_DATA_ERROR -// or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x8 -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index); -#endif - -#endif /* SOFT_SERIAL_H */ diff --git a/keyboards/fortitude60/serial_config.h b/keyboards/fortitude60/serial_config.h deleted file mode 100644 index d4a42bce38..0000000000 --- a/keyboards/fortitude60/serial_config.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef SOFT_SERIAL_CONFIG_H -#define SOFT_SERIAL_CONFIG_H - -/* Soft Serial defines */ -#define SOFT_SERIAL_PIN D2 - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -#endif /* SOFT_SERIAL_CONFIG_H */ diff --git a/keyboards/fortitude60/split_util.c b/keyboards/fortitude60/split_util.c deleted file mode 100644 index 1adae7844b..0000000000 --- a/keyboards/fortitude60/split_util.c +++ /dev/null @@ -1,85 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" -#include "timer.h" - -#include "serial.h" - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init (); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - timer_init(); -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - /* return (UDADDR & _BV(ADDEN)); */ - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (isLeftHand) { - /* if (has_usb()) { */ - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -void keyboard_slave_loop(void) { - matrix_init(); - - while (1) { - matrix_slave_scan(); - } -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); - - if (!isLeftHand) { - /* if (!has_usb()) { */ - keyboard_slave_loop(); - } -} diff --git a/keyboards/fortitude60/split_util.h b/keyboards/fortitude60/split_util.h deleted file mode 100644 index 28fff3e798..0000000000 --- a/keyboards/fortitude60/split_util.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include <stdbool.h> -#include "eeconfig.h" - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); - -#endif |